RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Rutherford County >> Plainview >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Plainview (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Plainview. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Plainview is located in Rutherford County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Rutherford County: Bedford, Cannon, Coffee, Davidson, Marshall, Williamson & Wilson.

Below are the counties that are near Plainview. For each of these counties, we show a sample of those communities that are closest to Plainview:

  • Rutherford County     (The home county of Plainview)
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Burns Place
      (4 miles [6.4 km] to the north)
      • Jump to our Gazetteer entry for Burns Place
      • Burns Place is located in Rutherford County
    • Rucker
      (4 miles [6.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Rucker have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rucker
      • Rucker is located in Rutherford County
    • Dillton
      (7 miles [11.3 km] to the north)
      • Jump to our Gazetteer entry for Dillton
      • Dillton is located in Rutherford County
    • Midland
      (7 miles [11.3 km] to the west)
      • Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Midland
      • Midland is located in Rutherford County
    • Murfreesboro
      (10 miles [16.1 km] to the north)
    • Kittrell
      (10 miles [16.1 km] to the northeast)
      • Jump to our Gazetteer entry for Kittrell
      • Kittrell is located in Rutherford County
    • Concord
      (12 miles [19.3 km] to the west)
    • Fairfield Estates
      (13 miles [20.9 km] to the north)
      • Note: The GPS coordinates that we are using for Fairfield Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairfield Estates
      • Fairfield Estates is located in Rutherford County
      • Population from the 2010 Census: 131 people
    • Readyville
      (13 miles [20.9 km] to the northeast)
    • Compton
      (14 miles [22.5 km] to the north)
      • Note: The GPS coordinates that we are using for Compton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Compton
      • Compton is located in Rutherford County
    • Snell ‑ Historic
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Snell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Snell
      • Snell is located in Rutherford County
      • Estimated population in 2014: 1,361 people
    • Colonial Village
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Colonial Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Colonial Village
      • Colonial Village is located in Rutherford County
  • Bedford County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Bell Buckle
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bell Buckle
      • Bell Buckle is located in Bedford County
      • Population from the 2020 Census: 537 people
      • Jump to TripAdvisor's Tourism page for Bell Buckle <2>
    • Vannatta
      (9 miles [14.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vannatta
      • Vannatta is located in Bedford County
      • Estimated population in 2014: 398 people
    • Wartrace
      (11 miles [17.7 km] to the south)
    • Longview
      (11 miles [17.7 km] to the west)
      • Jump to our Gazetteer entry for Longview
      • Longview is located in Bedford County
    • Haley
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Haley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Haley
      • Haley is located in Bedford County
    • Unionville
      (14 miles [22.5 km] to the west)
    • Anchor Mill ‑ Historic
      (15 miles [24.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Anchor Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Anchor Mill
      • Anchor Mill is located in Bedford County
    • Shelbyville
      (15 miles [24.1 km] to the southwest)
    • Cortner
      (16 miles [25.7 km] to the south)
      • Note: The GPS coordinates that we are using for Cortner have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cortner
      • Cortner is located in Bedford County
    • Normandy
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Normandy
      • Normandy is located in Bedford County
      • Population from the 2020 Census: 140 people
      • Jump to TripAdvisor's Tourism page for Normandy <2>
    • Cascade Hollow
      (18 miles [29 km] to the south)
      • Jump to our Gazetteer entry for Cascade Hollow
      • Cascade Hollow is located in Bedford County
    • Willow Grove
      (19 miles [30.6 km] to the south)
      • Note: The GPS coordinates that we are using for Willow Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Willow Grove
      • Willow Grove is located in Bedford County
  • Cannon County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Bradyville
      (10 miles [16.1 km] to the east)
      • Jump to our Gazetteer entry for Bradyville
      • Bradyville is located in Cannon County
    • Burgen
      (12 miles [19.3 km] to the east)
      • Note: The GPS coordinates that we are using for Burgen have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Burgen
      • Burgen is located in Cannon County
    • Burt
      (12 miles [19.3 km] to the east)
      • Jump to our Gazetteer entry for Burt
      • Burt is located in Cannon County
    • Hollow Springs
      (12 miles [19.3 km] to the east)
      • Note: The GPS coordinates that we are using for Hollow Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hollow Springs
      • Hollow Springs is located in Cannon County
      • Estimated population in 2014: 706 people
    • Woodbury
      (17 miles [27.4 km] to the northeast)
    • Manus Town ‑ Historic
      (19 miles [30.6 km] to the east)
      • Note: The GPS coordinates that we are using for Manus Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Manus Town
      • Manus Town is located in Cannon County
    • Bluewing
      (20 miles [32.2 km] to the east)
      • Jump to our Gazetteer entry for Bluewing
      • Bluewing is located in Cannon County
    • Thomas Town ‑ Historic
      (21 miles [33.8 km] to the east)
      • Note: The GPS coordinates that we are using for Thomas Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Thomas Town
      • Thomas Town is located in Cannon County
    • Auburntown
      (22 miles [35.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Auburntown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Auburntown
      • Auburntown is located in Cannon County
      • Population from the 2020 Census: 266 people
    • Woods
      (24 miles [38.6 km] to the northeast)
      • Jump to our Gazetteer entry for Woods
      • Woods is located in Cannon County
    • Gassaway
      (25 miles [40.2 km] to the northeast)
      • Jump to our Gazetteer entry for Gassaway
      • Gassaway is located in Cannon County
  • Coffee County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Gossburg
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for Gossburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gossburg
      • Gossburg is located in Coffee County
    • Beechgrove
      (7 miles [11.3 km] to the southeast)
    • Busy Corner
      (15 miles [24.1 km] to the southeast)
      • Jump to our Gazetteer entry for Busy Corner
      • Busy Corner is located in Coffee County
    • New Union
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for New Union have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Union
      • New Union is located in Coffee County
      • Population from the 2010 Census: 1,431 people
    • Forest Mill
      (21 miles [33.8 km] to the southeast)
      • Jump to our Gazetteer entry for Forest Mill
      • Forest Mill is located in Coffee County
    • Manchester
      (21 miles [33.8 km] to the southeast)
    • Homaway Village
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Homaway Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Homaway Village
      • Homaway Village is located in Coffee County
    • Royal Oaks
      (22 miles [35.4 km] to the southeast)
      • Jump to our Gazetteer entry for Royal Oaks
      • Royal Oaks is located in Coffee County
    • Belmont
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Belmont have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belmont
      • Belmont is located in Coffee County
    • Tullahoma
      (24 miles [38.6 km] to the south)
    • Southgate Park
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Southgate Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Southgate Park
      • Southgate Park is located in Coffee County
      • Estimated population in 2014: 2,284 people
    • Hillsboro
      (28 miles [45.1 km] to the southeast)
  • Davidson County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Wrencoe
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Wrencoe have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wrencoe
      • Wrencoe is located in Davidson County
    • Rural Hill
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Rural Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rural Hill
      • Rural Hill is located in Davidson County
      • Population from the 2010 Census: 2,007 people
  • DeKalb County
    • Liberty
      (29 miles [46.7 km] to the northeast)
      • Jump to our Gazetteer entry for Liberty
      • Liberty is located in DeKalb County
      • Population from the 2020 Census: 330 people
  • Lincoln County
    • Petersburg
      (30 miles [48.3 km] to the southwest)
  • Marshall County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Holts Corner
      (19 miles [30.6 km] to the west)
      • Jump to our Gazetteer entry for Holts Corner
      • Holts Corner is located in Marshall County
    • Chapel Hill
      (20 miles [32.2 km] to the west)
      • Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chapel Hill
      • Chapel Hill is located in Marshall County
      • Population from the 2020 Census: 1,571 people
      • Jump to TripAdvisor's Tourism page for Chapel Hill <2>
    • Caney Spring
      (24 miles [38.6 km] to the west)
      • Note: The GPS coordinates that we are using for Caney Spring have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Caney Spring
      • Caney Spring is located in Marshall County
    • Oak Hill
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Hill
      • Oak Hill is located in Marshall County
    • Verona
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Verona have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Verona
      • Verona is located in Marshall County
    • Orrs
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Orrs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Orrs
      • Orrs is located in Marshall County
      • Estimated population in 2014: 123 people
    • Berlin
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Berlin
      • Berlin is located in Marshall County
    • Lewisburg
      (30 miles [48.3 km] to the southwest)
    • Talley
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Talley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Talley
      • Talley is located in Marshall County
  • Moore County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Countyline
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Countyline have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Countyline
      • Countyline is located in Moore County
    • Lynchburg
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Lynchburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lynchburg
      • Lynchburg is located in Moore County
      • Jump to TripAdvisor's Tourism page for Lynchburg <2>
  • Warren County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Centertown
      (23 miles [37 km] to the east)
      • Jump to our Gazetteer entry for Centertown
      • Centertown is located in Warren County
      • Population from the 2020 Census: 256 people
    • Morrison
      (24 miles [38.6 km] to the east)
    • Daylight
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Daylight have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Daylight
      • Daylight is located in Warren County
    • Lucky
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Lucky have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lucky
      • Lucky is located in Warren County
    • Viola
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Viola
      • Viola is located in Warren County
      • Population from the 2020 Census: 141 people
      • Jump to TripAdvisor's Tourism page for Viola <2>
  • Williamson County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • College Grove
      (19 miles [30.6 km] to the west)
    • Arrington
      (23 miles [37 km] to the northwest)
    • Nolensville
      (25 miles [40.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Nolensville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nolensville
      • Nolensville is located in Williamson County
      • Population from the 2020 Census: 11,145 people
      • Jump to TripAdvisor's Tourism page for Nolensville <2>
    • Peytonsville
      (25 miles [40.2 km] to the west)
      • Jump to our Gazetteer entry for Peytonsville
      • Peytonsville is located in Williamson County
    • Duplex
      (27 miles [43.5 km] to the west)
      • Jump to our Gazetteer entry for Duplex
      • Duplex is located in Williamson County
  • Wilson County
    • The following are listed by their distance from Plainview, with the one closest to Plainview listed first.
    • Cainsville
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Cainsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cainsville
      • Cainsville is located in Wilson County
    • Statesville
      (25 miles [40.2 km] to the northeast)
      • Jump to our Gazetteer entry for Statesville
      • Statesville is located in Wilson County
    • Cottage Home
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Cottage Home have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cottage Home
      • Cottage Home is located in Wilson County
      • Estimated population in 2014: 88 people
    • Round Top
      (26 miles [41.8 km] to the northeast)
      • Jump to our Gazetteer entry for Round Top
      • Round Top is located in Wilson County
    • Doaks Crossroads
      (28 miles [45.1 km] to the north)
      • Jump to our Gazetteer entry for Doaks Crossroads
      • Doaks Crossroads is located in Wilson County
      • Doaks Crossroads has also been known as:
      • Doaks
    • Gladeville
      (28 miles [45.1 km] to the north)
    • Rural Hill
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Rural Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rural Hill
      • Rural Hill is located in Wilson County
    • Watertown
      (30 miles [48.3 km] to the northeast)

For an expanded list of the communities that are closest to Plainview, see our County-by-County Page for Plainview.

Newspapers Published in Plainview ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 39 newspapers that have been published in the area around Plainview.

Although we're unaware of any newspapers that were published in the immediate area of Plainview, there are papers which were published within 11 miles [17.7 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Plainview.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Plainview:

Cemeteries Near Plainview ...

Below are cemeteries that are in the vicinity of Plainview.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Plainview covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Plainview, with the one closest to Plainview listed first.

  • Jameson Cemetery
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for the Jameson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Jameson Cemetery
  • Wood - Adcock Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Wood - Adcock Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Wood - Adcock Cemetery
  • McNeil Cemetery
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for the McNeil Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the McNeil Cemetery
  • Millersburg Cemetery
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for the Millersburg Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Millersburg Cemetery
  • Howland Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the Howland Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Howland Cemetery
  • Pearson Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Pearson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Pearson Cemetery
  • Manor Cemetery
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Manor Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Manor Cemetery
  • Pruett Cemetery
    (2 miles [3.2 km] to the south)
    • Note: The GPS coordinates that we are using for the Pruett Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Pruett Cemetery
  • Delbridge Cemetery
    (2 miles [3.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Delbridge Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Delbridge Cemetery
  • Hoover Cemetery
    (2 miles [3.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Hoover Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hoover Cemetery
  • McKee Cemetery
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for the McKee Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the McKee Cemetery
  • Prater Cemetery
    (2 miles [3.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Prater Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Prater Cemetery
  • Continue List   (1629 more) ...
    • Isaac Miller Cemetery
      (2 miles [3.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for the Isaac Miller Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Isaac Miller Cemetery
    • Christiana Cemetery
      (2 miles [3.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for the Christiana Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Christiana Cemetery
    • Grant Cemetery
      (2 miles [3.2 km] to the west)
      • Note: The GPS coordinates that we are using for the Grant Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Grant Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

While we didn't find Plainview in the Atlas, the following 1895 communities would have been found near the current location of Plainview.

These communities are listed based on their distance from Plainview, with the one closest to Plainview listed first.

  • Fosterville
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Fosterville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fosterville
    • Fosterville is located in Rutherford County
  • Rucker
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Rucker have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rucker
    • Rucker is located in Rutherford County
  • Crescent
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Crescent have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crescent
    • Crescent is located in Rutherford County
  • Midland
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Midland
    • Midland is located in Rutherford County
  • Bell Buckle
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bell Buckle
    • Bell Buckle is located in Bedford County
    • Population from the 2020 Census: 537 people
    • Jump to TripAdvisor's Tourism page for Bell Buckle <2>
  • Beechgrove
    (7 miles [11.3 km] to the southeast)
  • Gossburg
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Gossburg have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gossburg
    • Gossburg is located in Coffee County
  • Donnell Chapel
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Donnell Chapel have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Donnell Chapel
    • Donnell Chapel is located in Rutherford County
  • Dillton
    (7 miles [11.3 km] to the north)
    • Jump to our Gazetteer entry for Dillton
    • Dillton is located in Rutherford County
  • Floraton
    (8 miles [12.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Floraton have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Floraton
    • Floraton is located in Rutherford County
  • Vannatta
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vannatta
    • Vannatta is located in Bedford County
    • Estimated population in 2014: 398 people
  • Fairfield
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairfield
    • Fairfield is located in Bedford County
  • Continue List   (15 more) ...
    • Link
      (9 miles [14.5 km] to the west)
      • Note: The GPS coordinates that we are using for Link have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Link
      • Link is located in Rutherford County
    • Murfreesboro
      (10 miles [16.1 km] to the north)
    • Bradyville
      (10 miles [16.1 km] to the east)
      • Jump to our Gazetteer entry for Bradyville
      • Bradyville is located in Cannon County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Plainview. See our List of 1890's Communities around Plainview.

Unfortunately, we don't know of a website for Plainview. If you can help, please contact us through our Feedback Page.

The official website for Rutherford County: www.rutherfordcounty.org/

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Plainview) to Point B.Our distance measurements begin at a specific point in Plainview. The point we use is located at these GPS coordinates - Latitude: 35.6998, Longitude: -86.3450       In this case, the coordinates for Plainview have been provided by the Geographic Names Information System (GNIS).
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Plainview, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024