Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Plainview in the Atlas, the following communities of the 1890's would have been found near the current location of Plainview. The following communities are listed based on their distance, with the one closest to Plainview listed first.
- Fosterville
(4 miles [6.4 km] to the southwest)
- Fosterville is located in Rutherford County
- Jump to our Gazetteer entry for Fosterville
- Rucker
(4 miles [6.4 km] to the northwest)
- Rucker is located in Rutherford County
- Jump to our Gazetteer entry for Rucker
- Crescent
(6 miles [9.7 km] to the northwest)
- Crescent is located in Rutherford County
- Jump to our Gazetteer entry for Crescent
- Midland
(7 miles [11.3 km] to the west)
- Midland is located in Rutherford County
- Jump to our Gazetteer entry for Midland
- Bell Buckle
(7 miles [11.3 km] to the south)
- Beechgrove
(7 miles [11.3 km] to the southeast)
- Gossburg
(7 miles [11.3 km] to the east)
- Gossburg is located in Coffee County
- Jump to our Gazetteer entry for Gossburg
- Donnell Chapel
(7 miles [11.3 km] to the northeast)
- Donnell Chapel is located in Rutherford County
- Jump to our Gazetteer entry for Donnell Chapel
- Dillton
(7 miles [11.3 km] to the north)
- Dillton is located in Rutherford County
- Jump to our Gazetteer entry for Dillton
- Floraton
(8 miles [12.9 km] to the northeast)
- Floraton is located in Rutherford County
- Jump to our Gazetteer entry for Floraton
- Vannatta
(9 miles [14.5 km] to the southwest)
- Vannatta is located in Bedford County
- Jump to our Gazetteer entry for Vannatta
- Estimated population in 2014: 398 people
- Fairfield
(9 miles [14.5 km] to the south)
- Fairfield is located in Bedford County
- Jump to our Gazetteer entry for Fairfield
- Link
(9 miles [14.5 km] to the west)
- Link is located in Rutherford County
- Jump to our Gazetteer entry for Link
- Murfreesboro
(10 miles [16.1 km] to the north)
- Bradyville
(10 miles [16.1 km] to the east)
- Bradyville is located in Cannon County
- Jump to our Gazetteer entry for Bradyville
- Kittrell
(10 miles [16.1 km] to the northeast)
- Kittrell is located in Rutherford County
- Jump to our Gazetteer entry for Kittrell
- Overall
(10 miles [16.1 km] to the northwest)
- Overall is located in Rutherford County
- Jump to our Gazetteer entry for Overall
- Longview
(11 miles [17.7 km] to the west)
- Longview is located in Bedford County
- Jump to our Gazetteer entry for Longview
- Wartrace
(11 miles [17.7 km] to the south)
- Rockvale
(11 miles [17.7 km] to the west)
- Versailles
(11 miles [17.7 km] to the west)
- Versailles is located in Rutherford County
- Jump to our Gazetteer entry for Versailles
- Noah
(12 miles [19.3 km] to the southeast)
- Noah is located in Coffee County
- Jump to our Gazetteer entry for Noah
- Hollow Springs
(12 miles [19.3 km] to the east)
- Hollow Springs is located in Cannon County
- Jump to our Gazetteer entry for Hollow Springs
- Estimated population in 2014: 706 people
- Burgen
(12 miles [19.3 km] to the east)
- Burgen is located in Cannon County
- Jump to our Gazetteer entry for Burgen
- Burt
(12 miles [19.3 km] to the east)
- Burt is located in Cannon County
- Jump to our Gazetteer entry for Burt
- Cateston
(12 miles [19.3 km] to the northeast)
- Cateston is located in Cannon County
- Jump to our Gazetteer entry for Cateston
- Sharpsville
(12 miles [19.3 km] to the north)
- Sharpsville is located in Rutherford County
- Jump to our Gazetteer entry for Sharpsville
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Plainview, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |