RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Roane County >> Bayside >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee


The Commemorative Quarter for Tennessee







Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Bayside (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Bayside. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Bayside is located in Roane County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Roane County: Anderson, Cumberland, Knox, Loudon, McMinn, Meigs, Morgan & Rhea.

Below are the counties that are near Bayside. For each of these counties, we show a sample of those communities that are closest to Bayside:

  • Roane County     (The home county of Bayside)
    • The following are listed by their distance from Bayside, with the one closest to Bayside listed first.
    • Pioneer Village
      (3 miles [4.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Pioneer Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pioneer Village
      • Pioneer Village is located in Roane County
    • Lakemont Heights
      (7 miles [11.3 km] to the north)
      • Note: The GPS coordinates that we are using for Lakemont Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lakemont Heights
      • Lakemont Heights is located in Roane County
      • Estimated population in 2014: 12,564 people
    • Postoak
      (8 miles [12.9 km] to the north)
      • Jump to our Gazetteer entry for Postoak
      • Postoak is located in Roane County
      • Postoak has also been known as:
      • Post Oak Springs
    • Rockwood
      (8 miles [12.9 km] to the north)
      • Note: The GPS coordinates that we are using for Rockwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rockwood
      • Rockwood is located in Roane County
      • Population from the 2020 Census: 5,459 people
      • Jump to TripAdvisor's Tourism page for Rockwood <2>
    • Cardiff
      (9 miles [14.5 km] to the north)
      • Jump to our Gazetteer entry for Cardiff
      • Cardiff is located in Roane County
    • Iron Divide ‑ Historic
      (9 miles [14.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Iron Divide have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Iron Divide
      • Iron Divide is located in Roane County
      • Population from the 2010 Census: 328 people
    • College Grove
      (10 miles [16.1 km] to the north)
      • Note: The GPS coordinates that we are using for College Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for College Grove
      • College Grove is located in Roane County
      • Estimated population in 2014: 10,729 people
    • Midtown Heights
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Midtown Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Midtown Heights
      • Midtown Heights is located in Roane County
      • Population from the 2010 Census: 1,360 people
    • Midtown
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Midtown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Midtown
      • Midtown is located in Roane County
    • Emory Gap
      (12 miles [19.3 km] to the north)
      • Note: The GPS coordinates that we are using for Emory Gap have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Emory Gap
      • Emory Gap is located in Roane County
    • Kingston
      (12 miles [19.3 km] to the northeast)
    • Laddie Village
      (12 miles [19.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Laddie Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Laddie Village
      • Laddie Village is located in Roane County
    • Bazel Town
      (16 miles [25.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Bazel Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bazel Town
      • Bazel Town is located in Roane County
  • Anderson County
    • The following are listed by their distance from Bayside, with the one closest to Bayside listed first.
    • Oak Ridge
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Oak Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Ridge
      • Oak Ridge is located in Anderson County
      • Population from the 2020 Census: 29,340 people
      • Jump to TripAdvisor's Tourism page for Oak Ridge <2>
    • Oliver Springs
      (27 miles [43.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Oliver Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oliver Springs
      • Oliver Springs is located in Anderson County
      • Population from the 2020 Census: 3,439 people
      • Jump to TripAdvisor's Tourism page for Oliver Springs <2>
    • Scarboro
      (29 miles [46.7 km] to the northeast)
      • Jump to our Gazetteer entry for Scarboro
      • Scarboro is located in Anderson County
  • Bledsoe County
    • The following are listed by their distance from Bayside, with the one closest to Bayside listed first.
    • Ninemile
      (24 miles [38.6 km] to the west)
      • Jump to our Gazetteer entry for Ninemile
      • Ninemile is located in Bledsoe County
    • Summer City
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Summer City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Summer City
      • Summer City is located in Bledsoe County
    • Winesap
      (28 miles [45.1 km] to the west)
      • Jump to our Gazetteer entry for Winesap
      • Winesap is located in Bledsoe County
  • Blount County
    • The following are listed by their distance from Bayside, with the one closest to Bayside listed first.
    • Kiser
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Kiser have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kiser
      • Kiser is located in Blount County
    • McMullens
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for McMullens have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McMullens
      • McMullens is located in Blount County
      • Estimated population in 2014: 13,620 people
    • Friendsville
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Friendsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Friendsville
      • Friendsville is located in Blount County
      • Population from the 2020 Census: 902 people
      • Jump to TripAdvisor's Tourism page for Friendsville <2>
  • Cumberland County
    • The following are listed by their distance from Bayside, with the one closest to Bayside listed first.
    • Jewett
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Jewett have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jewett
      • Jewett is located in Cumberland County
    • Crab Orchard
      (16 miles [25.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Crab Orchard have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Crab Orchard
      • Crab Orchard is located in Cumberland County
      • Population from the 2020 Census: 758 people
      • Jump to TripAdvisor's Tourism page for Crab Orchard <2>
    • Rogers
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Rogers have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rogers
      • Rogers is located in Cumberland County
      • Estimated population in 2014: 4,406 people
    • Center Ford
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Center Ford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Center Ford
      • Center Ford is located in Cumberland County
      • Estimated population in 2014: 1,485 people
    • Hebbertsburg
      (19 miles [30.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Hebbertsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hebbertsburg
      • Hebbertsburg is located in Cumberland County
    • Lake Pomeroy
      (20 miles [32.2 km] to the northwest)
      • Jump to our Gazetteer entry for Lake Pomeroy
      • Lake Pomeroy is located in Cumberland County
    • Burke
      (20 miles [32.2 km] to the west)
      • Jump to our Gazetteer entry for Burke
      • Burke is located in Cumberland County
    • Fairfield Glade
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Fairfield Glade have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairfield Glade
      • Fairfield Glade is located in Cumberland County
      • Population from the 2010 Census: 6,989 people
      • Jump to TripAdvisor's Tourism page for Fairfield Glade <2>
    • Woodlands
      (22 miles [35.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Woodlands have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodlands
      • Woodlands is located in Cumberland County
      • Estimated population in 2014: 369 people
    • Greenbriar Village
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Greenbriar Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Greenbriar Village
      • Greenbriar Village is located in Cumberland County
      • Estimated population in 2014: 1,103 people
    • Lake Tansi Village
      (23 miles [37 km] to the west)
      • Jump to our Gazetteer entry for Lake Tansi Village
      • Lake Tansi Village is located in Cumberland County
      • Population from the 2010 Census: 3,803 people
    • Crossville
      (24 miles [38.6 km] to the northwest)
    • Lantana
      (26 miles [41.8 km] to the west)
      • Jump to our Gazetteer entry for Lantana
      • Lantana is located in Cumberland County
  • Knox County
    • The following are listed by their distance from Bayside, with the one closest to Bayside listed first.
    • Belle Aire
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Belle Aire have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belle Aire
      • Belle Aire is located in Knox County
      • Estimated population in 2014: 512 people
    • Farragut
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Farragut have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Farragut
      • Farragut is located in Knox County
      • Population from the 2020 Census: 24,045 people
      • Jump to TripAdvisor's Tourism page for Farragut <2>
    • Virtue
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Virtue have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Virtue
      • Virtue is located in Knox County
      • Estimated population in 2014: 131 people
    • Concord
      (30 miles [48.3 km] to the east)
      • Jump to our Gazetteer entry for Concord
      • Concord is located in Knox County
  • Loudon County
    • The following are listed by their distance from Bayside, with the one closest to Bayside listed first.
    • Luttrell
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Luttrell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Luttrell
      • Luttrell is located in Loudon County
      • Jump to TripAdvisor's Tourism page for Luttrell <2>
    • Loudon City Park
      (15 miles [24.1 km] to the east)
      • Note: The GPS coordinates that we are using for Loudon City Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Loudon City Park
      • Loudon City Park is located in Loudon County
    • Philadelphia
      (15 miles [24.1 km] to the east)
      • Note: The GPS coordinates that we are using for Philadelphia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Philadelphia
      • Philadelphia is located in Loudon County
      • Population from the 2020 Census: 740 people
      • Jump to TripAdvisor's Tourism page for Philadelphia <2>
    • Loudon
      (17 miles [27.4 km] to the east)
    • Eaton Crossroads
      (21 miles [33.8 km] to the east)
      • Jump to our Gazetteer entry for Eaton Crossroads
      • Eaton Crossroads is located in Loudon County
    • White Wing Ferry
      (21 miles [33.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for White Wing Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for White Wing Ferry
      • White Wing Ferry is located in Loudon County
      • Estimated population in 2014: 4,550 people
    • Lenoir City
      (22 miles [35.4 km] to the east)
    • Sharp Estates
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for Sharp Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sharp Estates
      • Sharp Estates is located in Loudon County
      • Estimated population in 2014: 919 people
    • Centersville
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Centersville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Centersville
      • Centersville is located in Loudon County
    • Alleghany ‑ Historic
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Alleghany have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alleghany
      • Alleghany is located in Loudon County
      • Estimated population in 2014: 630 people
    • Morganton
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Morganton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morganton
      • Morganton is located in Loudon County
    • Greenback
      (28 miles [45.1 km] to the east)
    • Trigonia
      (28 miles [45.1 km] to the east)
      • Jump to our Gazetteer entry for Trigonia
      • Trigonia is located in Loudon County
  • McMinn County
    • The following are listed by their distance from Bayside, with the one closest to Bayside listed first.
    • Prigmore
      (10 miles [16.1 km] to the southeast)
      • Jump to our Gazetteer entry for Prigmore
      • Prigmore is located in McMinn County
    • Bell Spring
      (16 miles [25.7 km] to the southeast)
      • Jump to our Gazetteer entry for Bell Spring
      • Bell Spring is located in McMinn County
    • Niota
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Niota have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Niota
      • Niota is located in McMinn County
      • Population from the 2020 Census: 738 people
      • Jump to TripAdvisor's Tourism page for Niota <2>
    • Athens
      (20 miles [32.2 km] to the south)
      • Note: The GPS coordinates that we are using for Athens have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Athens
      • Athens is located in McMinn County
      • Population from the 2020 Census: 14,120 people
      • Jump to TripAdvisor's Tourism page for Athens <2>
    • Manila
      (22 miles [35.4 km] to the southeast)
      • Jump to our Gazetteer entry for Manila
      • Manila is located in McMinn County
    • Englewood
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Englewood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Englewood
      • Englewood is located in McMinn County
      • Population from the 2020 Census: 1,538 people
      • Jump to TripAdvisor's Tourism page for Englewood <2>
    • Riceville
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Riceville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Riceville
      • Riceville is located in McMinn County
      • Population from the 2010 Census: 670 people
      • Jump to TripAdvisor's Tourism page for Riceville <2>
    • Lamontville
      (28 miles [45.1 km] to the south)
      • Jump to our Gazetteer entry for Lamontville
      • Lamontville is located in McMinn County
    • Etowah
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Etowah have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Etowah
      • Etowah is located in McMinn County
      • Population from the 2020 Census: 3,527 people
      • Jump to TripAdvisor's Tourism page for Etowah <2>
    • Goodsprings
      (29 miles [46.7 km] to the south)
      • Jump to our Gazetteer entry for Goodsprings
      • Goodsprings is located in McMinn County
    • Claxton
      (30 miles [48.3 km] to the south)
      • Jump to our Gazetteer entry for Claxton
      • Claxton is located in McMinn County
    • Mecca
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Mecca have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mecca
      • Mecca is located in McMinn County
  • Meigs County
    • The following are listed by their distance from Bayside, with the one closest to Bayside listed first.
    • Surprise
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for Surprise have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Surprise
      • Surprise is located in Meigs County
      • Estimated population in 2014: 1,799 people
    • Sewee
      (10 miles [16.1 km] to the south)
      • Note: The GPS coordinates that we are using for Sewee have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sewee
      • Sewee is located in Meigs County
    • Decatur
      (17 miles [27.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Decatur have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Decatur
      • Decatur is located in Meigs County
      • Population from the 2020 Census: 1,663 people
      • Jump to TripAdvisor's Tourism page for Decatur <2>
    • Calico
      (18 miles [29 km] to the southwest)
      • Note: The GPS coordinates that we are using for Calico have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Calico
      • Calico is located in Meigs County
      • Estimated population in 2014: 495 people
    • Goodfield
      (21 miles [33.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Goodfield have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Goodfield
      • Goodfield is located in Meigs County
    • Beta
      (25 miles [40.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Beta have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beta
      • Beta is located in Meigs County
    • Cayuga Town ‑ Historic
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Cayuga Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cayuga Town
      • Cayuga Town is located in Meigs County
  • Monroe County
    • The following are listed by their distance from Bayside, with the one closest to Bayside listed first.
    • Sweetwater
      (14 miles [22.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Sweetwater have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sweetwater
      • Sweetwater is located in Monroe County
      • Population from the 2020 Census: 5,956 people
      • Jump to TripAdvisor's Tourism page for Sweetwater <2>
    • Madisonville
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Madisonville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Madisonville
      • Madisonville is located in Monroe County
      • Population from the 2020 Census: 5,024 people
      • Jump to TripAdvisor's Tourism page for Madisonville <2>
    • Vonore
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Vonore have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vonore
      • Vonore is located in Monroe County
      • Population from the 2020 Census: 1,580 people
      • Jump to TripAdvisor's Tourism page for Vonore <2>
    • Tuskeegee ‑ Historic
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Tuskeegee have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tuskeegee
      • Tuskeegee is located in Monroe County
      • Estimated population in 2014: 2,663 people
  • Morgan County
    • The following are listed by their distance from Bayside, with the one closest to Bayside listed first.
    • Harriman
      (13 miles [20.9 km] to the northeast)
      • Note: The GPS coordinates that we are using for Harriman have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harriman
      • Harriman is located in Morgan County
      • Population from the 2020 Census: 6,182 people
      • Jump to TripAdvisor's Tourism page for Harriman <2>
    • Oakdale
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Oakdale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oakdale
      • Oakdale is located in Morgan County
      • Population from the 2020 Census: 207 people
    • Deermont
      (19 miles [30.6 km] to the north)
      • Note: The GPS coordinates that we are using for Deermont have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Deermont
      • Deermont is located in Morgan County
    • Blue Gem ‑ Historic
      (20 miles [32.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Blue Gem have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blue Gem
      • Blue Gem is located in Morgan County
    • Coal Hill
      (20 miles [32.2 km] to the northeast)
      • Jump to our Gazetteer entry for Coal Hill
      • Coal Hill is located in Morgan County
    • Catoosa ‑ Historic
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for Catoosa have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Catoosa
      • Catoosa is located in Morgan County
    • Wartburg
      (24 miles [38.6 km] to the north)
    • Coalfield
      (24 miles [38.6 km] to the northeast)
      • Jump to our Gazetteer entry for Coalfield
      • Coalfield is located in Morgan County
      • Population from the 2010 Census: 2,463 people
    • Petros
      (26 miles [41.8 km] to the northeast)
      • Jump to our Gazetteer entry for Petros
      • Petros is located in Morgan County
      • Population from the 2010 Census: 583 people
    • Tupper Town
      (27 miles [43.5 km] to the northeast)
      • Jump to our Gazetteer entry for Tupper Town
      • Tupper Town is located in Morgan County
    • Annadel
      (29 miles [46.7 km] to the north)
      • Jump to our Gazetteer entry for Annadel
      • Annadel is located in Morgan County
    • Bucklick
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Bucklick have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bucklick
      • Bucklick is located in Morgan County
    • Lavender
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Lavender have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lavender
      • Lavender is located in Morgan County
  • Rhea County
    • The following are listed by their distance from Bayside, with the one closest to Bayside listed first.
    • Roddy
      (6 miles [9.7 km] to the west)
      • Note: The GPS coordinates that we are using for Roddy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Roddy
      • Roddy is located in Rhea County
    • Lakewood Village
      (9 miles [14.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lakewood Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lakewood Village
      • Lakewood Village is located in Rhea County
      • Population from the 2010 Census: 990 people
    • Spring City
      (11 miles [17.7 km] to the west)
    • Cumberland Spring
      (26 miles [41.8 km] to the southwest)
      • Jump to our Gazetteer entry for Cumberland Spring
      • Cumberland Spring is located in Rhea County
    • Dayton
      (26 miles [41.8 km] to the southwest)

For an expanded list of the communities that are closest to Bayside, see our County-by-County Page for Bayside.

Newspapers Published in Bayside ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 33 newspapers that have been published in the area around Bayside.

Although we're unaware of any newspapers that were published in the immediate area of Bayside, there are papers which were published within 12 miles [19.3 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Bayside.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Bayside:

Cemeteries Near Bayside ...

Below are cemeteries that are in the vicinity of Bayside.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Bayside covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Bayside, with the one closest to Bayside listed first.

  • Johnson Cemetery
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for the Johnson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Johnson Cemetery
  • Luminary Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the Luminary Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Luminary Cemetery
  • Hornsby Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Hornsby Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hornsby Cemetery
  • Cooley Cemetery
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Cooley Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Cooley Cemetery
  • Ray Cemetery
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Ray Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Ray Cemetery
  • Williams Cemetery
    (2 miles [3.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Williams Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Williams Cemetery
  • Deatherage Cemetery
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for the Deatherage Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Deatherage Cemetery
  • Jackson Cemetery
    (2 miles [3.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Jackson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Jackson Cemetery
  • Brown Cemetery
    (2 miles [3.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Brown Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Brown Cemetery
  • Ellis Cemetery
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for the Ellis Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Ellis Cemetery
  • Union Star Cemetery
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for the Union Star Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Union Star Cemetery
  • Perry Cemetery
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for the Perry Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Perry Cemetery
  • Continue List   (914 more) ...
    • McCaleb Cemetery
      (3 miles [4.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for the McCaleb Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the McCaleb Cemetery
    • Cross Key Cemetery
      (3 miles [4.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Cross Key Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Cross Key Cemetery
    • Reed Cemetery
      (3 miles [4.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Reed Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Reed Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

While we didn't find Bayside in the Atlas, the following 1895 communities would have been found near the current location of Bayside.

These communities are listed based on their distance from Bayside, with the one closest to Bayside listed first.

  • Barnardsville
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for Barnardsville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Barnardsville
    • Barnardsville is located in Roane County
  • Euchee
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Euchee have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Euchee
    • Euchee is located in Meigs County
  • Morrisgap ‑ Historic
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Morrisgap have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Morrisgap
    • Morrisgap is located in Roane County
  • Glen Alice
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Glen Alice have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Glen Alice
    • Glen Alice is located in Roane County
  • Roddy
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Roddy have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Roddy
    • Roddy is located in Rhea County
  • Surprise
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Surprise have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Surprise
    • Surprise is located in Meigs County
    • Estimated population in 2014: 1,799 people
  • Pattie Gap ‑ Historic
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Pattie Gap have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pattie Gap
    • Pattie Gap is located in Roane County
  • Regret ‑ Historic
    (8 miles [12.9 km] to the south)
    • Note: The GPS coordinates that we are using for Regret have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Regret
    • Regret is located in McMinn County
  • Erie
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Erie have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Erie
    • Erie is located in Loudon County
  • Webster
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Webster have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Webster
    • Webster is located in Roane County
  • Rockwood
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Rockwood have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rockwood
    • Rockwood is located in Roane County
    • Population from the 2020 Census: 5,459 people
    • Jump to TripAdvisor's Tourism page for Rockwood <2>
  • Lorraine
    (9 miles [14.5 km] to the west)
    • Note: The GPS coordinates that we are using for Lorraine have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lorraine
    • Lorraine is located in Rhea County
  • Continue List   (13 more) ...
    • Cardiff
      (9 miles [14.5 km] to the north)
      • Jump to our Gazetteer entry for Cardiff
      • Cardiff is located in Roane County
    • Rhea Springs ‑ Historic
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Rhea Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rhea Springs
      • Rhea Springs is located in Rhea County
    • Sewee
      (10 miles [16.1 km] to the south)
      • Note: The GPS coordinates that we are using for Sewee have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sewee
      • Sewee is located in Meigs County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Bayside. See our List of 1890's Communities around Bayside.

Unfortunately, we don't know of a website for Bayside. If you can help, please contact us through our Feedback Page.

The official website for Roane County: www.roanealliance.org/

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Bayside) to Point B.Our distance measurements begin at a specific point in Bayside. The point we use is located at these GPS coordinates - Latitude: 35.7487, Longitude: -84.6610       In this case, the coordinates for Bayside have been provided by the Geographic Names Information System (GNIS).
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Bayside, please let us know so that we can improve our accuracy.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024