Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Farmville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Farmville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Farmville is located in Gordon County.
To see how the shape of Georgia's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Gordon County: Bartow, Cherokee, Floyd, Gilmer, Murray, Pickens, Walker & Whitfield.
Below are the counties that are near Farmville. For each of these counties, we show a sample of those communities that are closest to Farmville:
- Gordon County (The home county of Farmville)
- The following are listed by their distance from Farmville, with the one closest to Farmville listed first.
- Sonoraville
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Sonoraville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sonoraville
- Sonoraville is located in Gordon County
- Estimated population in 2019: 3,148 people
- New Town
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Town
- New Town is located in Gordon County
- Calhoun Ferry
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Calhoun Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calhoun Ferry
- Calhoun Ferry is located in Gordon County
- Estimated population in 2019: 17,271 people
- Calhoun
(7 miles [11.3 km] to the northwest)
- Fairmount
(8 miles [12.9 km] to the east)
- Igo ‑ Historic
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Igo have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Igo
- Igo is located in Gordon County
- Estimated population in 2019: 359 people
- Ranger
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Ranger have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ranger
- Ranger is located in Gordon County
- Population from the 2020 Census: 137 people
- Jump to TripAdvisor's Tourism page for Ranger <2>
- Soapstick
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Soapstick have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Soapstick
- Soapstick is located in Gordon County
- Estimated population in 2019: 4,544 people
- Damascus
(9 miles [14.5 km] to the northwest)
- Buff ‑ Historic
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Buff have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buff
- Buff is located in Gordon County
- Estimated population in 2019: 15,522 people
- Resaca Ferry
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Resaca Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Resaca Ferry
- Resaca Ferry is located in Gordon County
- Estimated population in 2019: 803 people
- Resaca
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Resaca have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Resaca
- Resaca is located in Gordon County
- Population from the 2020 Census: 1,089 people
- Jump to TripAdvisor's Tourism page for Resaca <2>
- Bartow County
- The following are listed by their distance from Farmville, with the one closest to Farmville listed first.
- Adairsville
(7 miles [11.3 km] to the southwest)
- Bolivar
(8 miles [12.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Bolivar. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bolivar
- Bolivar is located in Bartow County
- Google driving directions:
- From your current location to Bolivar
- From Farmville to Bolivar
- Funkhouser
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Funkhouser have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Funkhouser
- Funkhouser is located in Bartow County
- Estimated population in 2019: 450 people
- Pine Log ‑ Historic
(9 miles [14.5 km] to the southeast)
- Rydal
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Rydal have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rydal
- Rydal is located in Bartow County
- Jump to TripAdvisor's Tourism page for Rydal <2>
- White
(12 miles [19.3 km] to the southeast)
- McCallie
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for McCallie have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McCallie
- McCallie is located in Bartow County
- Estimated population in 2019: 1,204 people
- Cassville
(14 miles [22.5 km] to the south)
- Country Village
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Country Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Country Village
- Country Village is located in Bartow County
- Interchange Village
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Interchange Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Interchange Village
- Interchange Village is located in Bartow County
- Kingston
(15 miles [24.1 km] to the south)
- Buena Vista
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Buena Vista have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buena Vista
- Buena Vista is located in Bartow County
- Estimated population in 2019: 2,053 people
- Chattooga County
- The following are listed by their distance from Farmville, with the one closest to Farmville listed first.
- Zula ‑ Historic
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Zula have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zula
- Zula is located in Chattooga County
- Pennville
(27 miles [43.5 km] to the west)
- Trion
(27 miles [43.5 km] to the west)
- Summerville
(28 miles [45.1 km] to the west)
- Berryton
(30 miles [48.3 km] to the west)
- Cherokee County
- The following are listed by their distance from Farmville, with the one closest to Farmville listed first.
- Salacoa
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Salacoa have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salacoa
- Salacoa is located in Cherokee County
- Estimated population in 2019: 344 people
- Waleska
(18 miles [29 km] to the southeast)
- Worley Crossroads
(22 miles [35.4 km] to the east)
- Canton
(24 miles [38.6 km] to the southeast)
- Payne
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Payne have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Payne
- Payne is located in Cherokee County
- Allatoona Pass
(26 miles [41.8 km] to the southeast)
- Ball Ground
(27 miles [43.5 km] to the east)
- Holly Springs
(27 miles [43.5 km] to the southeast)
- Buffington
(28 miles [45.1 km] to the southeast)
- Gibson Acres
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Gibson Acres have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gibson Acres
- Gibson Acres is located in Cherokee County
- Estimated population in 2019: 631 people
- Harmony
(28 miles [45.1 km] to the southeast)
- Lebanon
(28 miles [45.1 km] to the southeast)
- Cobb County
- The following are listed by their distance from Farmville, with the one closest to Farmville listed first.
- Logan Trace
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Logan Trace have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Logan Trace
- Logan Trace is located in Cobb County
- Estimated population in 2019: 12,880 people
- Acworth
(28 miles [45.1 km] to the south)
- Mitchell Hill
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Mitchell Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mitchell Hill
- Mitchell Hill is located in Cobb County
- Estimated population in 2019: 189 people
- Mars Hill
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Mars Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mars Hill
- Mars Hill is located in Cobb County
- Calumet Woods
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Calumet Woods have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calumet Woods
- Calumet Woods is located in Cobb County
- Population from the 2010 Census: 161 people
- Floyd County
- The following are listed by their distance from Farmville, with the one closest to Farmville listed first.
- Hermitage
(15 miles [24.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Hermitage. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hermitage
- Hermitage is located in Floyd County
- Google driving directions:
- From your current location to Hermitage
- From Farmville to Hermitage
- Shannon
(15 miles [24.1 km] to the southwest)
- Floyd Springs
(17 miles [27.4 km] to the west)
- Bass Ferry
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Bass Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bass Ferry
- Bass Ferry is located in Floyd County
- Armuchee
(19 miles [30.6 km] to the west)
- Dykes ‑ Historic
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Dykes have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dykes
- Dykes is located in Floyd County
- Glenwood
(20 miles [32.2 km] to the southwest)
- Mount Berry
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Mount Berry have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Berry
- Mount Berry is located in Floyd County
- Jump to TripAdvisor's Tourism page for Mount Berry <2>
- Rome
(22 miles [35.4 km] to the southwest)
- Summerville Park
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Summerville Park have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Summerville Park
- Summerville Park is located in Floyd County
- Estimated population in 2019: 4,243 people
- Central Grove ‑ Historic
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Central Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Central Grove
- Central Grove is located in Floyd County
- Estimated population in 2019: 377 people
- Chiaha ‑ Historic
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Chiaha have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chiaha
- Chiaha is located in Floyd County
- Estimated population in 2019: 3,256 people
- Gilmer County
- The following are listed by their distance from Farmville, with the one closest to Farmville listed first.
- Whitestone
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Whitestone have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitestone
- Whitestone is located in Gilmer County
- Tails Creek
(21 miles [33.8 km] to the northeast)
- Yukon
(24 miles [38.6 km] to the northeast)
- East Ellijay
(26 miles [41.8 km] to the northeast)
- Ellijay
(26 miles [41.8 km] to the northeast)
- Northcutt
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Northcutt have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Northcutt
- Northcutt is located in Gilmer County
- Population from the 2010 Census: 16,698 people
- Murray County
- The following are listed by their distance from Farmville, with the one closest to Farmville listed first.
- Carters
(13 miles [20.9 km] to the northeast)
- Ball Ground
(14 miles [22.5 km] to the north)
- Wells ‑ Historic
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Wells have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wells
- Wells is located in Murray County
- Chatsworth
(22 miles [35.4 km] to the north)
- Eton
(26 miles [41.8 km] to the north)
- Crandall
(29 miles [46.7 km] to the north)
- Sumac
(30 miles [48.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Sumac. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sumac
- Sumac is located in Murray County
- Google driving directions:
- From your current location to Sumac
- From Farmville to Sumac
- Pickens County
- The following are listed by their distance from Farmville, with the one closest to Farmville listed first.
- Jerusalem
(14 miles [22.5 km] to the east)
- Talmadge
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Talmadge have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Talmadge
- Talmadge is located in Pickens County
- Estimated population in 2019: 257 people
- Hinton
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Hinton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hinton
- Hinton is located in Pickens County
- Estimated population in 2019: 4,223 people
- Talking Rock
(19 miles [30.6 km] to the east)
- Cagle
(23 miles [37 km] to the east)
- Jasper
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Jasper have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jasper
- Jasper is located in Pickens County
- Population from the 2020 Census: 4,037 people
- Jump to TripAdvisor's Tourism page for Jasper <2>
- Tate
(26 miles [41.8 km] to the east)
- Nelson
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Nelson have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nelson
- Nelson is located in Pickens County
- Population from the 2020 Census: 1,395 people
- Jump to TripAdvisor's Tourism page for Nelson <2>
- Marble Hill
(28 miles [45.1 km] to the east)
- Polk County
- The following are listed by their distance from Farmville, with the one closest to Farmville listed first.
- Seney
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Seney have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seney
- Seney is located in Polk County
- Estimated population in 2019: 4,412 people
- Aragon
(30 miles [48.3 km] to the southwest)
- Walker County
- The following are listed by their distance from Farmville, with the one closest to Farmville listed first.
- Furnace ‑ Historic
(19 miles [30.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Furnace. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Furnace
- Furnace is located in Walker County
- Google driving directions:
- From your current location to Furnace
- From Farmville to Furnace
- Villanow
(21 miles [33.8 km] to the northwest)
- Martindale
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Martindale have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Martindale
- Martindale is located in Walker County
- Population from the 2010 Census: 35,795 people
- LaFayette
(30 miles [48.3 km] to the northwest)
- Whitfield County
- The following are listed by their distance from Farmville, with the one closest to Farmville listed first.
- Crown Mill Village
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Crown Mill Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crown Mill Village
- Crown Mill Village is located in Whitfield County
- Union Point
(22 miles [35.4 km] to the north)
- Dalton
(23 miles [37 km] to the north)
- Gordon Springs ‑ Historic
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Gordon Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gordon Springs
- Gordon Springs is located in Whitfield County
- Rocky Face
(26 miles [41.8 km] to the northwest)
- Waring
(27 miles [43.5 km] to the north)
- Crow ‑ Historic
(27 miles [43.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Crow. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Crow
- Crow is located in Whitfield County
- Google driving directions:
- From your current location to Crow
- From Farmville to Crow
- Trickum
(27 miles [43.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Trickum. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Trickum
- Trickum is located in Whitfield County
- Google driving directions:
- From your current location to Trickum
- From Farmville to Trickum
- Ruralvale
(29 miles [46.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Ruralvale. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ruralvale
- Ruralvale is located in Whitfield County
- Google driving directions:
- From your current location to Ruralvale
- From Farmville to Ruralvale
- Tunnel Hill
(29 miles [46.7 km] to the northwest)
- Plainview
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Whitfield County
- Estimated population in 2019: 318 people
For an expanded list of the communities that are closest to Farmville, see our County-by-County Page for Farmville.
Cemeteries Near Farmville ...
Below are cemeteries that are in the vicinity of Farmville.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Farmville covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Farmville, with the one closest to Farmville listed first.
- Cooper Cemetery
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for the Cooper Cemetery
- Note: The GPS coordinates that we are using for the Cooper Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Gaines Cemetery
(Less than 2 miles to the east)
- Jump to our Gazetteer entry for the Gaines Cemetery
- Note: The GPS coordinates that we are using for the Gaines Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Tate Cemetery
(2 miles [3.2 km] to the east)
- Jump to our Gazetteer entry for the Tate Cemetery
- Note: The GPS coordinates that we are using for the Tate Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Franklin Graveyard
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for the Franklin Graveyard
- Note: The GPS coordinates that we are using for the Franklin Graveyard have been provided by the GNIS.<1> The coordinates still need to be verified.
- Concord Cemetery
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for the Concord Cemetery
- Note: The GPS coordinates that we are using for the Concord Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Blackwood Cemetery
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for the Blackwood Cemetery
- Note: The GPS coordinates that we are using for the Blackwood Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Cedar Creek Baptist Church Cemetery
(4 miles [6.4 km] to the south)
- Happy Hollow Cemetery
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for the Happy Hollow Cemetery
- Note: The GPS coordinates that we are using for the Happy Hollow Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Barton Family Cemetery
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for the Barton Family Cemetery
- Note: The GPS coordinates that we are using for the Barton Family Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Glade Cemetery
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for the Glade Cemetery
- Note: The GPS coordinates that we are using for the Glade Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Curtis Cemetery
(4 miles [6.4 km] to the northwest)
- Jump to our Gazetteer entry for the Curtis Cemetery
- Note: The GPS coordinates that we are using for the Curtis Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Memorial Gardens
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for the Memorial Gardens
- Note: The GPS coordinates that we are using for the Memorial Gardens have been provided by the GNIS.<1> The coordinates still need to be verified.
- Continue List (433 more) ...
- Pickard Family Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the Pickard Family Cemetery
- Note: The GPS coordinates that we are using for the Pickard Family Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Hayes Cemetery
(5 miles [8 km] to the south)
- Jump to our Gazetteer entry for the Hayes Cemetery
- Note: The GPS coordinates that we are using for the Hayes Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Lewis - Linn Cemetery
(5 miles [8 km] to the southeast)
- Jump to our Gazetteer entry for the Lewis - Linn Cemetery
- Note: The GPS coordinates that we are using for the Lewis - Linn Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>
The Rand McNally Atlas shows that in 1895, Farmville had a post office and no railroad service.
These communities are listed based on their distance from Farmville, with the one closest to Farmville listed first.
- Sonoraville
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Sonoraville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sonoraville
- Sonoraville is located in Gordon County
- Estimated population in 2019: 3,148 people
- Cash
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Cash have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cash
- Cash is located in Gordon County
- Crane Eater
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Crane Eater have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crane Eater
- Crane Eater is located in Gordon County
- McDaniels
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for McDaniels have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McDaniels
- McDaniels is located in Gordon County
- Gum Springs
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Gum Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gum Springs
- Gum Springs is located in Bartow County
- Redbud
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Redbud have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Redbud
- Redbud is located in Gordon County
- Adairsville
(7 miles [11.3 km] to the southwest)
- Calhoun
(7 miles [11.3 km] to the northwest)
- Bolivar
(8 miles [12.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Bolivar. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bolivar
- Bolivar is located in Bartow County
- Google driving directions:
- From your current location to Bolivar
- From Farmville to Bolivar
- Fairmount
(8 miles [12.9 km] to the east)
- Igo ‑ Historic
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Igo have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Igo
- Igo is located in Gordon County
- Estimated population in 2019: 359 people
- Ranger
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Ranger have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ranger
- Ranger is located in Gordon County
- Population from the 2020 Census: 137 people
- Jump to TripAdvisor's Tourism page for Ranger <2>
- Continue List (18 more) ...
- Pine Log ‑ Historic
(9 miles [14.5 km] to the southeast)
- Bobo
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Bobo have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bobo
- Bobo is located in Gordon County
- Wheeler ‑ Historic
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Wheeler have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wheeler
- Wheeler is located in Gordon County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Farmville. See our List of 1890's Communities around Farmville.
Newspapers Published in Farmville ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 21 newspapers that have been published in the area around Farmville.
Although we're unaware of any newspapers that were published in the immediate area of Farmville, there are papers which were published within 14 miles [22.5 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Farmville.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Farmville:
- Websites specific to Georgia
- Pages specific to Gordon County
- Genealogy information for nearby counties
- Bartow County
- Chattooga County
- Cherokee County
- Cobb County
- Floyd County
- Gilmer County
- Murray County
- Pickens County
- Polk County
- Walker County
- Whitfield County
- Cemetery Information and Directories for Georgia
Off-the-Road Links ...
Unfortunately, we don't know of a website for Farmville. If you can help, please contact us through our Feedback Page.
The official website for Gordon County: www.gordoncounty.org/
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Farmville, please let us know so that we can improve our accuracy. |
<5> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Farmville) to Point B.Our distance measurements begin at a specific point in Farmville. The point we use is located at these GPS coordinates - Latitude: 34.4485, Longitude: -84.8449 In this case, the coordinates for Farmville have been provided by the Geographic Names Information System (GNIS). |