Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Oakwood (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Oakwood. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Oakwood is located in Rutherford County.
To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Rutherford County: Bedford, Cannon, Coffee, Davidson, Marshall, Williamson & Wilson.
Below are the counties that are near Oakwood. For each of these counties, we show a sample of those communities that are closest to Oakwood:
- Rutherford County (The home county of Oakwood)
- The following are listed by their distance from Oakwood, with the one closest to Oakwood listed first.
- Rucker
(Less than 2 miles to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Rucker. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Rucker
- Rucker is located in Rutherford County
- Burns Place
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for Burns Place
- Burns Place is located in Rutherford County
- Dillton
(5 miles [8 km] to the northeast)
- Jump to our Gazetteer entry for Dillton
- Dillton is located in Rutherford County
- Plainview
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Rutherford County
- Murfreesboro
(6 miles [9.7 km] to the north)
- Midland
(7 miles [11.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Midland. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Midland
- Midland is located in Rutherford County
- Concord
(8 miles [12.9 km] to the west)
- Fairfield Estates
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Fairfield Estates have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfield Estates
- Fairfield Estates is located in Rutherford County
- Population from the 2010 Census: 131 people
- Snell ‑ Historic
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Snell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Snell
- Snell is located in Rutherford County
- Estimated population in 2014: 1,361 people
- Compton
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Compton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Compton
- Compton is located in Rutherford County
- Kittrell
(10 miles [16.1 km] to the northeast)
- Jump to our Gazetteer entry for Kittrell
- Kittrell is located in Rutherford County
- Colonial Village
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Colonial Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colonial Village
- Colonial Village is located in Rutherford County
- Bedford County
- The following are listed by their distance from Oakwood, with the one closest to Oakwood listed first.
- Vannatta
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vannatta
- Vannatta is located in Bedford County
- Estimated population in 2014: 398 people
- Longview
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Longview
- Longview is located in Bedford County
- Bell Buckle
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Buckle
- Bell Buckle is located in Bedford County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Bell Buckle <3>
- Unionville
(14 miles [22.5 km] to the southwest)
- Wartrace
(16 miles [25.7 km] to the south)
- Anchor Mill ‑ Historic
(16 miles [25.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Anchor Mill. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Anchor Mill
- Anchor Mill is located in Bedford County
- Shelbyville
(18 miles [29 km] to the south)
- Haley
(19 miles [30.6 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Haley. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Haley
- Haley is located in Bedford County
- Cortner
(21 miles [33.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Cortner. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Cortner
- Cortner is located in Bedford County
- Normandy
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Normandy
- Normandy is located in Bedford County
- Population from the 2020 Census: 140 people
- Jump to TripAdvisor's Tourism page for Normandy <3>
- Cascade Hollow
(23 miles [37 km] to the south)
- Jump to our Gazetteer entry for Cascade Hollow
- Cascade Hollow is located in Bedford County
- Palmetto
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Palmetto have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Palmetto
- Palmetto is located in Bedford County
- Estimated population in 2014: 661 people
- Cannon County
- The following are listed by their distance from Oakwood, with the one closest to Oakwood listed first.
- Bradyville
(13 miles [20.9 km] to the east)
- Jump to our Gazetteer entry for Bradyville
- Bradyville is located in Cannon County
- Burt
(15 miles [24.1 km] to the east)
- Jump to our Gazetteer entry for Burt
- Burt is located in Cannon County
- Burgen
(16 miles [25.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Burgen. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Burgen
- Burgen is located in Cannon County
- Hollow Springs
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Hollow Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hollow Springs
- Hollow Springs is located in Cannon County
- Estimated population in 2014: 706 people
- Woodbury
(19 miles [30.6 km] to the east)
- Auburntown
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Auburntown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Auburntown
- Auburntown is located in Cannon County
- Population from the 2020 Census: 266 people
- Manus Town ‑ Historic
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Manus Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manus Town
- Manus Town is located in Cannon County
- Bluewing
(23 miles [37 km] to the east)
- Jump to our Gazetteer entry for Bluewing
- Bluewing is located in Cannon County
- Thomas Town ‑ Historic
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Thomas Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thomas Town
- Thomas Town is located in Cannon County
- Woods
(26 miles [41.8 km] to the east)
- Jump to our Gazetteer entry for Woods
- Woods is located in Cannon County
- Gassaway
(26 miles [41.8 km] to the northeast)
- Jump to our Gazetteer entry for Gassaway
- Gassaway is located in Cannon County
- Coffee County
- The following are listed by their distance from Oakwood, with the one closest to Oakwood listed first.
- Gossburg
(12 miles [19.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Gossburg. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Gossburg
- Gossburg is located in Coffee County
- Beechgrove
(13 miles [20.9 km] to the southeast)
- Busy Corner
(21 miles [33.8 km] to the southeast)
- Jump to our Gazetteer entry for Busy Corner
- Busy Corner is located in Coffee County
- Naola ‑ Historic
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Naola have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Naola
- Naola is located in Coffee County
- Teal ‑ Historic
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Teal have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Teal
- Teal is located in Coffee County
- New Union
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for New Union have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Union
- New Union is located in Coffee County
- Population from the 2010 Census: 1,431 people
- Forest Mill
(26 miles [41.8 km] to the southeast)
- Jump to our Gazetteer entry for Forest Mill
- Forest Mill is located in Coffee County
- Manchester
(26 miles [41.8 km] to the southeast)
- Homaway Village
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Homaway Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Homaway Village
- Homaway Village is located in Coffee County
- Royal Oaks
(27 miles [43.5 km] to the southeast)
- Jump to our Gazetteer entry for Royal Oaks
- Royal Oaks is located in Coffee County
- Belmont
(28 miles [45.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Belmont. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Belmont
- Belmont is located in Coffee County
- Tullahoma
(29 miles [46.7 km] to the south)
- Davidson County
- The following are listed by their distance from Oakwood, with the one closest to Oakwood listed first.
- Rural Hill
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Rural Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rural Hill
- Rural Hill is located in Davidson County
- Population from the 2010 Census: 2,007 people
- Wrencoe
(24 miles [38.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Wrencoe. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Wrencoe
- Wrencoe is located in Davidson County
- Priest Lake Park
(25 miles [40.2 km] to the northwest)
- Jump to our Gazetteer entry for Priest Lake Park
- Priest Lake Park is located in Davidson County
- Nashboro Village
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Nashboro Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nashboro Village
- Nashboro Village is located in Davidson County
- Whispering Hills
(27 miles [43.5 km] to the northwest)
- Jump to our Gazetteer entry for Whispering Hills
- Whispering Hills is located in Davidson County
- Paragon Mills
(28 miles [45.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Paragon Mills. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Paragon Mills
- Paragon Mills is located in Davidson County
- Dog Town ‑ Historic
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Dog Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dog Town
- Dog Town is located in Davidson County
- Oak Hill
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Hill
- Oak Hill is located in Davidson County
- Population from the 2020 Census: 4,432 people
- DeKalb County
- The following are listed by their distance from Oakwood, with the one closest to Oakwood listed first.
- Liberty
(29 miles [46.7 km] to the northeast)
- Jump to our Gazetteer entry for Liberty
- Liberty is located in DeKalb County
- Population from the 2020 Census: 330 people
- Alexandria
(30 miles [48.3 km] to the northeast)
- Youngblood ‑ Historic
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Youngblood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Youngblood
- Youngblood is located in DeKalb County
- Marshall County
- The following are listed by their distance from Oakwood, with the one closest to Oakwood listed first.
- Holts Corner
(16 miles [25.7 km] to the west)
- Jump to our Gazetteer entry for Holts Corner
- Holts Corner is located in Marshall County
- Chapel Hill
(18 miles [29 km] to the southwest)
- Caney Spring
(22 miles [35.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Caney Spring. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Caney Spring
- Caney Spring is located in Marshall County
- Verona
(25 miles [40.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Verona. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Verona
- Verona is located in Marshall County
- Oak Hill
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Hill
- Oak Hill is located in Marshall County
- Belfast
(28 miles [45.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Belfast. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Belfast
- Belfast is located in Marshall County
- Berlin
(28 miles [45.1 km] to the southwest)
- Jump to our Gazetteer entry for Berlin
- Berlin is located in Marshall County
- Orrs
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Orrs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orrs
- Orrs is located in Marshall County
- Estimated population in 2014: 123 people
- South Berlin
(29 miles [46.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for South Berlin. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for South Berlin
- South Berlin is located in Marshall County
- Lewisburg
(30 miles [48.3 km] to the southwest)
- Maury County
- The following are listed by their distance from Oakwood, with the one closest to Oakwood listed first.
- Leftwich
(28 miles [45.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Leftwich. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Leftwich
- Leftwich is located in Maury County
- New Town
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Town
- New Town is located in Maury County
- Moore County
- Countyline
(30 miles [48.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Countyline. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Countyline
- Countyline is located in Moore County
- Warren County
- The following are listed by their distance from Oakwood, with the one closest to Oakwood listed first.
- Trousdale
(26 miles [41.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Trousdale. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Trousdale
- Trousdale is located in Warren County
- Centertown
(27 miles [43.5 km] to the east)
- Jump to our Gazetteer entry for Centertown
- Centertown is located in Warren County
- Population from the 2020 Census: 256 people
- Morrison
(29 miles [46.7 km] to the east)
- Daylight
(30 miles [48.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Daylight. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Daylight
- Daylight is located in Warren County
- Williamson County
- The following are listed by their distance from Oakwood, with the one closest to Oakwood listed first.
- College Grove
(15 miles [24.1 km] to the west)
- Arrington
(18 miles [29 km] to the northwest)
- Nolensville
(19 miles [30.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Nolensville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Nolensville
- Nolensville is located in Williamson County
- Population from the 2020 Census: 11,145 people
- Jump to TripAdvisor's Tourism page for Nolensville <3>
- Peytonsville
(21 miles [33.8 km] to the west)
- Jump to our Gazetteer entry for Peytonsville
- Peytonsville is located in Williamson County
- Clovercroft
(23 miles [37 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Clovercroft. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Clovercroft
- Clovercroft is located in Williamson County
- Duplex
(24 miles [38.6 km] to the west)
- Jump to our Gazetteer entry for Duplex
- Duplex is located in Williamson County
- Harpeth
(24 miles [38.6 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Harpeth. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Harpeth
- Harpeth is located in Williamson County
- Brentwood
(26 miles [41.8 km] to the northwest)
- McEwen ‑ Historic
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for McEwen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McEwen
- McEwen is located in Williamson County
- Estimated population in 2014: 1,699 people
- Parry
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Parry have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parry
- Parry is located in Williamson County
- Estimated population in 2014: 262 people
- Franklin
(28 miles [45.1 km] to the northwest)
- Spring Hill
(28 miles [45.1 km] to the west)
- Wilson County
- The following are listed by their distance from Oakwood, with the one closest to Oakwood listed first.
- Cainsville
(17 miles [27.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Cainsville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Cainsville
- Cainsville is located in Wilson County
- Statesville
(23 miles [37 km] to the northeast)
- Jump to our Gazetteer entry for Statesville
- Statesville is located in Wilson County
- Gladeville
(24 miles [38.6 km] to the north)
- Doaks Crossroads
(25 miles [40.2 km] to the north)
- Jump to our Gazetteer entry for Doaks Crossroads
- Doaks Crossroads is located in Wilson County
- Doaks Crossroads has also been known as:
- Doaks
- Rural Hill
(25 miles [40.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Rural Hill. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Rural Hill
- Rural Hill is located in Wilson County
- Cottage Home
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Cottage Home have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cottage Home
- Cottage Home is located in Wilson County
- Estimated population in 2014: 88 people
- Round Top
(26 miles [41.8 km] to the northeast)
- Jump to our Gazetteer entry for Round Top
- Round Top is located in Wilson County
- Belinda City
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Belinda City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belinda City
- Belinda City is located in Wilson County
- Greenwood
(28 miles [45.1 km] to the north)
- Jump to our Gazetteer entry for Greenwood
- Greenwood is located in Wilson County
- Watertown
(28 miles [45.1 km] to the northeast)
- Leeville
(29 miles [46.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Leeville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Leeville
- Leeville is located in Wilson County
- Lynn Christie
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Lynn Christie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynn Christie
- Lynn Christie is located in Wilson County
- Estimated population in 2011: 6,411 people
For an expanded list of the communities that are closest to Oakwood, see our County-by-County Page for Oakwood.
Cemeteries Near Oakwood ...
Below are cemeteries that are in the vicinity of Oakwood.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Oakwood covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Oakwood, with the one closest to Oakwood listed first.
- Webb Cemetery
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for the Webb Cemetery
- Note: The GPS coordinates that we are using for the Webb Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Fletcher Cemetery
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for the Fletcher Cemetery
- Note: The GPS coordinates that we are using for the Fletcher Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Butler Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Butler Cemetery
- Note: The GPS coordinates that we are using for the Butler Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Webb Cemetery
(Less than 2 miles to the northwest)
- Jump to our Gazetteer entry for the Webb Cemetery
- Note: The GPS coordinates that we are using for the Webb Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Lovorn Cemetery
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for the Lovorn Cemetery
- Note: The GPS coordinates that we are using for the Lovorn Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Baskin Cemetery
(Less than 2 miles to the north)
- Harrison Cemetery
(2 miles [3.2 km] to the west)
- Jump to our Gazetteer entry for the Harrison Cemetery
- Note: The GPS coordinates that we are using for the Harrison Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Daniel Cemetery
(2 miles [3.2 km] to the south)
- Jump to our Gazetteer entry for the Daniel Cemetery
- Note: The GPS coordinates that we are using for the Daniel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Odell Cemetery
(2 miles [3.2 km] to the south)
- Jump to our Gazetteer entry for the Odell Cemetery
- Note: The GPS coordinates that we are using for the Odell Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jordan Cemetery
(2 miles [3.2 km] to the north)
- Jump to our Gazetteer entry for the Jordan Cemetery
- Note: The GPS coordinates that we are using for the Jordan Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Christiana Cemetery
(2 miles [3.2 km] to the south)
- Jump to our Gazetteer entry for the Christiana Cemetery
- Note: The GPS coordinates that we are using for the Christiana Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Alexander Cemetery
(2 miles [3.2 km] to the east)
- Jump to our Gazetteer entry for the Alexander Cemetery
- Note: The GPS coordinates that we are using for the Alexander Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Continue List (1668 more) ...
- Hallyburton Cemetery
(2 miles [3.2 km] to the northeast)
- Jump to our Gazetteer entry for the Hallyburton Cemetery
- Note: The GPS coordinates that we are using for the Hallyburton Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Liddon Cemetery
(2 miles [3.2 km] to the north)
- Jump to our Gazetteer entry for the Liddon Cemetery
- Note: The GPS coordinates that we are using for the Liddon Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Miller Cemetery
(2 miles [3.2 km] to the north)
- Jump to our Gazetteer entry for the Miller Cemetery
- Note: The GPS coordinates that we are using for the Miller Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
While we didn't find Oakwood in the Atlas, the following 1895 communities would have been found near the current location of Oakwood.
These communities are listed based on their distance from Oakwood, with the one closest to Oakwood listed first.
- Rucker
(Less than 2 miles to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Rucker. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Rucker
- Rucker is located in Rutherford County
- Crescent
(2 miles [3.2 km] to the west)
- Note: The GPS coordinates that we are using for Crescent have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crescent
- Crescent is located in Rutherford County
- Dillton
(5 miles [8 km] to the northeast)
- Jump to our Gazetteer entry for Dillton
- Dillton is located in Rutherford County
- Overall
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Overall have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Overall
- Overall is located in Rutherford County
- Link
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Link have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Link
- Link is located in Rutherford County
- Murfreesboro
(6 miles [9.7 km] to the north)
- Rockvale
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Rockvale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockvale
- Rockvale is located in Rutherford County
- Jump to TripAdvisor's Tourism page for Rockvale <3>
- Versailles
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Versailles have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Versailles
- Versailles is located in Rutherford County
- Midland
(7 miles [11.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Midland. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Midland
- Midland is located in Rutherford County
- Fosterville
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Fosterville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fosterville
- Fosterville is located in Rutherford County
- Floraton
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Floraton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Floraton
- Floraton is located in Rutherford County
- Snell ‑ Historic
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Snell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Snell
- Snell is located in Rutherford County
- Estimated population in 2014: 1,361 people
- Continue List (17 more) ...
- Longview
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Longview
- Longview is located in Bedford County
- Vannatta
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vannatta
- Vannatta is located in Bedford County
- Estimated population in 2014: 398 people
- Donnell Chapel
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Donnell Chapel have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Donnell Chapel
- Donnell Chapel is located in Rutherford County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Oakwood. See our List of 1890's Communities around Oakwood.
Newspapers Published in Oakwood ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 36 newspapers that have been published in the area around Oakwood.
Although we're unaware of any newspapers that were published in the immediate area of Oakwood, there are papers which were published within 6 miles [9.7 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Oakwood.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Oakwood:
- Websites specific to Tennessee
- Pages specific to Rutherford County
- Genealogy information for nearby counties
- Bedford County
- Cannon County
- Coffee County
- Davidson County
- DeKalb County
- Marshall County
- Maury County
- Moore County
- Warren County
- Williamson County
- Wilson County
- Cemetery Information and Directories for Tennessee
Off-the-Road Links ...
Unfortunately, we don't know of a website for Oakwood. If you can help, please contact us through our Feedback Page.
The official website for Rutherford County: www.rutherfordcounty.org/
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Oakwood, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Oakwood) to Point B.Our distance measurements begin at a specific point in Oakwood. The point we use is located at these GPS coordinates - Latitude: 35.7606, Longitude: -86.4069 In this case, the coordinates for Oakwood have been provided by the Geographic Names Information System (GNIS). |