Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Juniper Acres (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Juniper Acres. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Juniper Acres is located in Rutherford County.
To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Rutherford County: Bedford, Cannon, Coffee, Davidson, Marshall, Williamson & Wilson.
Below are the counties that are near Juniper Acres. For each of these counties, we show a sample of those communities that are closest to Juniper Acres:
- Rutherford County (The home county of Juniper Acres)
- The following are listed by their distance from Juniper Acres, with the one closest to Juniper Acres listed first.
- Walter Hill Estates
(Less than 2 miles to the south)
- Note: The GPS coordinates that we are using for Walter Hill Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walter Hill Estates
- Walter Hill Estates is located in Rutherford County
- Population from the 2010 Census: 401 people
- Walterhill
(Less than 2 miles to the south)
- Note: We haven't been able to verify our GPS coordinates for Walterhill. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Walterhill
- Walterhill is located in Rutherford County
- Jamestown
(2 miles [3.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Jamestown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jamestown
- Jamestown is located in Rutherford County
- Estimated population in 2014: 1,940 people
- Fairfield Estates
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Fairfield Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfield Estates
- Fairfield Estates is located in Rutherford County
- Population from the 2010 Census: 131 people
- Compton
(4 miles [6.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Compton. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Compton
- Compton is located in Rutherford County
- Colonial Village
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Colonial Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colonial Village
- Colonial Village is located in Rutherford County
- Murphree
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Murphree have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Murphree
- Murphree is located in Rutherford County
- Estimated population in 2014: 120,954 people
- Murfreesboro
(7 miles [11.3 km] to the south)
- Smyrna
(7 miles [11.3 km] to the west)
- Jefferson Pike
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Jefferson Pike have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jefferson Pike
- Jefferson Pike is located in Rutherford County
- Estimated population in 2014: 8,370 people
- Dillton
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Dillton
- Dillton is located in Rutherford County
- La Vergne
(11 miles [17.7 km] to the west)
- Bedford County
- The following are listed by their distance from Juniper Acres, with the one closest to Juniper Acres listed first.
- Longview
(23 miles [37 km] to the south)
- Jump to our Gazetteer entry for Longview
- Longview is located in Bedford County
- Vannatta
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vannatta
- Vannatta is located in Bedford County
- Estimated population in 2014: 398 people
- Bell Buckle
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Buckle
- Bell Buckle is located in Bedford County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Bell Buckle <3>
- Unionville
(26 miles [41.8 km] to the southwest)
- Anchor Mill ‑ Historic
(30 miles [48.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Anchor Mill. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Anchor Mill
- Anchor Mill is located in Bedford County
- Wartrace
(30 miles [48.3 km] to the south)
- Cannon County
- The following are listed by their distance from Juniper Acres, with the one closest to Juniper Acres listed first.
- Auburntown
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Auburntown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Auburntown
- Auburntown is located in Cannon County
- Population from the 2020 Census: 266 people
- Bradyville
(19 miles [30.6 km] to the southeast)
- Jump to our Gazetteer entry for Bradyville
- Bradyville is located in Cannon County
- Burt
(19 miles [30.6 km] to the southeast)
- Jump to our Gazetteer entry for Burt
- Burt is located in Cannon County
- Woodbury
(19 miles [30.6 km] to the southeast)
- Gassaway
(21 miles [33.8 km] to the east)
- Jump to our Gazetteer entry for Gassaway
- Gassaway is located in Cannon County
- Burgen
(21 miles [33.8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Burgen. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Burgen
- Burgen is located in Cannon County
- Bluewing
(24 miles [38.6 km] to the southeast)
- Jump to our Gazetteer entry for Bluewing
- Bluewing is located in Cannon County
- Hollow Springs
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Hollow Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hollow Springs
- Hollow Springs is located in Cannon County
- Estimated population in 2014: 706 people
- Manus Town ‑ Historic
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Manus Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manus Town
- Manus Town is located in Cannon County
- Thomas Town ‑ Historic
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Thomas Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thomas Town
- Thomas Town is located in Cannon County
- Woods
(25 miles [40.2 km] to the east)
- Jump to our Gazetteer entry for Woods
- Woods is located in Cannon County
- Coffee County
- The following are listed by their distance from Juniper Acres, with the one closest to Juniper Acres listed first.
- Gossburg
(22 miles [35.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Gossburg. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Gossburg
- Gossburg is located in Coffee County
- Beechgrove
(24 miles [38.6 km] to the south)
- Naola ‑ Historic
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Naola have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Naola
- Naola is located in Coffee County
- Davidson County
- The following are listed by their distance from Juniper Acres, with the one closest to Juniper Acres listed first.
- Priest Lake Park
(15 miles [24.1 km] to the northwest)
- Jump to our Gazetteer entry for Priest Lake Park
- Priest Lake Park is located in Davidson County
- Rural Hill
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Rural Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rural Hill
- Rural Hill is located in Davidson County
- Population from the 2010 Census: 2,007 people
- Nashboro Village
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Nashboro Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nashboro Village
- Nashboro Village is located in Davidson County
- Wrencoe
(18 miles [29 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Wrencoe. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Wrencoe
- Wrencoe is located in Davidson County
- Whispering Hills
(20 miles [32.2 km] to the west)
- Jump to our Gazetteer entry for Whispering Hills
- Whispering Hills is located in Davidson County
- Dog Town ‑ Historic
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Dog Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dog Town
- Dog Town is located in Davidson County
- Donelson
(21 miles [33.8 km] to the northwest)
- Jump to our Gazetteer entry for Donelson
- Donelson is located in Davidson County
- Hermitage
(21 miles [33.8 km] to the northwest)
- Mudtavern
(21 miles [33.8 km] to the northwest)
- Jump to our Gazetteer entry for Mudtavern
- Mudtavern is located in Davidson County
- Paragon Mills
(21 miles [33.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Paragon Mills. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Paragon Mills
- Paragon Mills is located in Davidson County
- Oak Hill
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Hill
- Oak Hill is located in Davidson County
- Population from the 2020 Census: 4,432 people
- Berry Hill
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Berry Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Berry Hill
- Berry Hill is located in Davidson County
- Population from the 2020 Census: 492 people
- DeKalb County
- The following are listed by their distance from Juniper Acres, with the one closest to Juniper Acres listed first.
- Alexandria
(20 miles [32.2 km] to the northeast)
- Liberty
(23 miles [37 km] to the east)
- Jump to our Gazetteer entry for Liberty
- Liberty is located in DeKalb County
- Population from the 2020 Census: 330 people
- Dowelltown
(24 miles [38.6 km] to the east)
- Youngblood ‑ Historic
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Youngblood have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Youngblood
- Youngblood is located in DeKalb County
- Temperance Hall
(28 miles [45.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Temperance Hall. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Temperance Hall
- Temperance Hall is located in DeKalb County
- Population from the 2010 Census: 5,791 people
- Marshall County
- The following are listed by their distance from Juniper Acres, with the one closest to Juniper Acres listed first.
- Holts Corner
(25 miles [40.2 km] to the southwest)
- Jump to our Gazetteer entry for Holts Corner
- Holts Corner is located in Marshall County
- Chapel Hill
(29 miles [46.7 km] to the southwest)
- Smith County
- The following are listed by their distance from Juniper Acres, with the one closest to Juniper Acres listed first.
- Shaver Town
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Shaver Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shaver Town
- Shaver Town is located in Smith County
- Hickman
(27 miles [43.5 km] to the northeast)
- Jump to our Gazetteer entry for Hickman
- Hickman is located in Smith County
- Rock City
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Rock City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock City
- Rock City is located in Smith County
- Bluff Creek
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Bluff Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bluff Creek
- Bluff Creek is located in Smith County
- Estimated population in 2014: 1,734 people
- Gordonsville
(29 miles [46.7 km] to the northeast)
- South Carthage
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for South Carthage have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Carthage
- South Carthage is located in Smith County
- Population from the 2020 Census: 1,406 people
- Sumner County
- The following are listed by their distance from Juniper Acres, with the one closest to Juniper Acres listed first.
- Driftwood Park
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Driftwood Park have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Driftwood Park
- Driftwood Park is located in Sumner County
- Estimated population in 2014: 2,908 people
- Hendersonville
(27 miles [43.5 km] to the northwest)
- Gallatin
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Gallatin have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gallatin
- Gallatin is located in Sumner County
- Population from the 2020 Census: 44,335 people
- Jump to TripAdvisor's Tourism page for Gallatin <3>
- Castalian Springs
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Castalian Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Castalian Springs
- Castalian Springs is located in Sumner County
- Population from the 2010 Census: 556 people
- Jump to TripAdvisor's Tourism page for Castalian Springs <3>
- Ocana
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Ocana have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ocana
- Ocana is located in Sumner County
- Estimated population in 2014: 1,086 people
- Trousdale
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Trousdale have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trousdale
- Trousdale is located in Sumner County
- Warren County
- Centertown
(30 miles [48.3 km] to the southeast)
- Jump to our Gazetteer entry for Centertown
- Centertown is located in Warren County
- Population from the 2020 Census: 256 people
- Williamson County
- The following are listed by their distance from Juniper Acres, with the one closest to Juniper Acres listed first.
- Nolensville
(16 miles [25.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Nolensville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Nolensville
- Nolensville is located in Williamson County
- Population from the 2020 Census: 11,145 people
- Jump to TripAdvisor's Tourism page for Nolensville <3>
- Arrington
(19 miles [30.6 km] to the west)
- College Grove
(20 miles [32.2 km] to the southwest)
- Clovercroft
(21 miles [33.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Clovercroft. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Clovercroft
- Clovercroft is located in Williamson County
- Brentwood
(22 miles [35.4 km] to the west)
- Peytonsville
(24 miles [38.6 km] to the southwest)
- Jump to our Gazetteer entry for Peytonsville
- Peytonsville is located in Williamson County
- Lynnwood Downs
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Lynnwood Downs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynnwood Downs
- Lynnwood Downs is located in Williamson County
- Estimated population in 2014: 282 people
- McEwen ‑ Historic
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for McEwen have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McEwen
- McEwen is located in Williamson County
- Estimated population in 2014: 1,699 people
- Wildwood Estates
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Wildwood Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wildwood Estates
- Wildwood Estates is located in Williamson County
- Population from the 2010 Census: 1,098 people
- Franklin
(27 miles [43.5 km] to the west)
- Harpeth
(28 miles [45.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Harpeth. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Harpeth
- Harpeth is located in Williamson County
- Berrys Chapel Heights
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Berrys Chapel Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Berrys Chapel Heights
- Berrys Chapel Heights is located in Williamson County
- Estimated population in 2014: 551 people
- Wilson County
- The following are listed by their distance from Juniper Acres, with the one closest to Juniper Acres listed first.
- Cainsville
(7 miles [11.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Cainsville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Cainsville
- Cainsville is located in Wilson County
- Gladeville
(10 miles [16.1 km] to the north)
- Doaks Crossroads
(12 miles [19.3 km] to the northeast)
- Jump to our Gazetteer entry for Doaks Crossroads
- Doaks Crossroads is located in Wilson County
- Doaks Crossroads has also been known as:
- Doaks
- Rural Hill
(13 miles [20.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Rural Hill. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Rural Hill
- Rural Hill is located in Wilson County
- Statesville
(14 miles [22.5 km] to the east)
- Jump to our Gazetteer entry for Statesville
- Statesville is located in Wilson County
- Leeville
(15 miles [24.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Leeville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Leeville
- Leeville is located in Wilson County
- Greenwood
(15 miles [24.1 km] to the northeast)
- Jump to our Gazetteer entry for Greenwood
- Greenwood is located in Wilson County
- Belinda City
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Belinda City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belinda City
- Belinda City is located in Wilson County
- Watertown
(16 miles [25.7 km] to the northeast)
- Beckwith
(17 miles [27.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Beckwith. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Beckwith
- Beckwith is located in Wilson County
- Lebanon
(17 miles [27.4 km] to the north)
- Linwood
(17 miles [27.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Linwood. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Linwood
- Linwood is located in Wilson County
For an expanded list of the communities that are closest to Juniper Acres, see our County-by-County Page for Juniper Acres.
Cemeteries Near Juniper Acres ...
Below are cemeteries that are in the vicinity of Juniper Acres.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Juniper Acres covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Juniper Acres, with the one closest to Juniper Acres listed first.
- Johns Cemetery
(Less than 2 miles to the southwest)
- Jump to our Gazetteer entry for the Johns Cemetery
- Note: The GPS coordinates that we are using for the Johns Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Walterhill Cemetery
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for the Walterhill Cemetery
- Note: The GPS coordinates that we are using for the Walterhill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Robinson - McMillian Cemetery
(Less than 2 miles to the northeast)
- Jump to our Gazetteer entry for the Robinson - McMillian Cemetery
- Note: The GPS coordinates that we are using for the Robinson - McMillian Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Wrather Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Wrather Cemetery
- Note: The GPS coordinates that we are using for the Wrather Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Edwards Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Edwards Cemetery
- Note: The GPS coordinates that we are using for the Edwards Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Coleman Cemetery
(Less than 2 miles to the southwest)
- Jump to our Gazetteer entry for the Coleman Cemetery
- Note: The GPS coordinates that we are using for the Coleman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Black Cemetery
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for the Black Cemetery
- Note: The GPS coordinates that we are using for the Black Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Pierce Cemetery
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for the Pierce Cemetery
- Note: The GPS coordinates that we are using for the Pierce Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Wade Cemetery
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for the Wade Cemetery
- Note: The GPS coordinates that we are using for the Wade Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Estes Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Estes Cemetery
- Note: The GPS coordinates that we are using for the Estes Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Alford Cemetery
(Less than 2 miles to the northwest)
- Jump to our Gazetteer entry for the Alford Cemetery
- Note: The GPS coordinates that we are using for the Alford Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to Find-A-Grave: FG ID #8554 <4>
- Searcy Cemetery
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for the Searcy Cemetery
- Note: The GPS coordinates that we are using for the Searcy Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Continue List (1373 more) ...
- Parker Cemetery
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for the Parker Cemetery
- Note: The GPS coordinates that we are using for the Parker Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Burrus Cemetery
(2 miles [3.2 km] to the southwest)
- Jump to our Gazetteer entry for the Burrus Cemetery
- Note: The GPS coordinates that we are using for the Burrus Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Crawford Cemetery
(2 miles [3.2 km] to the south)
- Jump to our Gazetteer entry for the Crawford Cemetery
- Note: The GPS coordinates that we are using for the Crawford Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
While we didn't find Juniper Acres in the Atlas, the following 1895 communities would have been found near the current location of Juniper Acres.
These communities are listed based on their distance from Juniper Acres, with the one closest to Juniper Acres listed first.
- Walterhill
(Less than 2 miles to the south)
- Note: We haven't been able to verify our GPS coordinates for Walterhill. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Walterhill
- Walterhill is located in Rutherford County
- Compton
(4 miles [6.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Compton. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Compton
- Compton is located in Rutherford County
- Vesta
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Vesta have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vesta
- Vesta is located in Wilson County
- Murfreesboro
(7 miles [11.3 km] to the south)
- Cainsville
(7 miles [11.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Cainsville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Cainsville
- Cainsville is located in Wilson County
- Smyrna
(7 miles [11.3 km] to the west)
- Sharpsville
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Sharpsville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sharpsville
- Sharpsville is located in Rutherford County
- Oak Point ‑ Historic
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Oak Point have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Point
- Oak Point is located in Wilson County
- Halls Hill
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Halls Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Halls Hill
- Halls Hill is located in Rutherford County
- Greenvale
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Greenvale have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenvale
- Greenvale is located in Wilson County
- Bairds Mill
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Bairds Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bairds Mill
- Bairds Mill is located in Wilson County
- Rocky Fork
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Rocky Fork have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rocky Fork
- Rocky Fork is located in Rutherford County
- Continue List (13 more) ...
- Overall
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Overall have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Overall
- Overall is located in Rutherford County
- Dillton
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Dillton
- Dillton is located in Rutherford County
- Milton
(11 miles [17.7 km] to the east)
- Jump to our Gazetteer entry for Milton
- Milton is located in Rutherford County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Juniper Acres. See our List of 1890's Communities around Juniper Acres.
Newspapers Published in Juniper Acres ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 40 newspapers that have been published in the area around Juniper Acres.
Although we're unaware of any newspapers that were published in the immediate area of Juniper Acres, there are papers which were published within 7 miles [11.3 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Juniper Acres.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Juniper Acres:
- Websites specific to Tennessee
- Pages specific to Rutherford County
- Genealogy information for nearby counties
- Bedford County
- Cannon County
- Coffee County
- Davidson County
- DeKalb County
- Marshall County
- Smith County
- Sumner County
- Warren County
- Williamson County
- Wilson County
- Cemetery Information and Directories for Tennessee
Off-the-Road Links ...
Unfortunately, we don't know of a website for Juniper Acres. If you can help, please contact us through our Feedback Page.
The official website for Rutherford County: www.rutherfordcounty.org/
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Juniper Acres, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Juniper Acres) to Point B.Our distance measurements begin at a specific point in Juniper Acres. The point we use is located at these GPS coordinates - Latitude: 35.9615, Longitude: -86.3805 In this case, the coordinates for Juniper Acres have been provided by the Geographic Names Information System (GNIS). |