TripAdvisor Links
Introduction ...
When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
While we are unaware of a TripAdvisor Tourism page that is specific to Milltown, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Milltown - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 26 communities listed:
- Alexandria
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Alexandria have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alexandria
- Alexandria is located in Hanson County
- Population from the 2020 Census: 650 people
- Jump to TripAdvisor's Tourism page for Alexandria <3>
- Armour
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Armour have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Armour
- Armour is located in Douglas County
- Population from the 2020 Census: 666 people
- Jump to TripAdvisor's Tourism page for Armour <3>
- Bridgewater
(17 miles [27.4 km] to the northeast)
- Canistota
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Canistota have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Canistota
- Canistota is located in McCook County
- Population from the 2020 Census: 620 people
- Jump to TripAdvisor's Tourism page for Canistota <3>
- Corsica
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Corsica have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Corsica
- Corsica is located in Douglas County
- Population from the 2020 Census: 569 people
- Jump to TripAdvisor's Tourism page for Corsica <3>
- Delmont
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Delmont have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Delmont
- Delmont is located in Douglas County
- Population from the 2020 Census: 215 people
- Jump to TripAdvisor's Tourism page for Delmont <3>
- Dimock
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Dimock have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dimock
- Dimock is located in Hutchinson County
- Population from the 2020 Census: 171 people
- Jump to TripAdvisor's Tourism page for Dimock <3>
- Emery
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Emery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Emery
- Emery is located in Hanson County
- Population from the 2020 Census: 454 people
- Jump to TripAdvisor's Tourism page for Emery <3>
- Ethan
(12 miles [19.3 km] to the northwest)
- Freeman
(19 miles [30.6 km] to the east)
- Fulton
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Fulton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fulton
- Fulton is located in Hanson County
- Population from the 2020 Census: 96 people
- Jump to TripAdvisor's Tourism page for Fulton <3>
- Kaylor
(16 miles [25.7 km] to the south)
- Lesterville
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Lesterville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lesterville
- Lesterville is located in Yankton County
- Population from the 2020 Census: 130 people
- Jump to TripAdvisor's Tourism page for Lesterville <3>
- Loomis
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Loomis have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loomis
- Loomis is located in Davison County
- Jump to TripAdvisor's Tourism page for Loomis <3>
- Marion
(27 miles [43.5 km] to the east)
- Menno
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Menno have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Menno
- Menno is located in Hutchinson County
- Population from the 2020 Census: 615 people
- Jump to TripAdvisor's Tourism page for Menno <3>
- Mitchell
(22 miles [35.4 km] to the northwest)
- Monroe
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monroe
- Monroe is located in Turner County
- Population from the 2020 Census: 156 people
- Jump to TripAdvisor's Tourism page for Monroe <3>
- Mount Vernon
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Mount Vernon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Vernon
- Mount Vernon is located in Davison County
- Population from the 2020 Census: 438 people
- Jump to TripAdvisor's Tourism page for Mount Vernon <3>
- Olivet
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Olivet have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Olivet
- Olivet is located in Hutchinson County
- Population from the 2020 Census: 70 people
- Jump to TripAdvisor's Tourism page for Olivet <3>
- Parkston
(9 miles [14.5 km] to the west)
- Salem
(29 miles [46.7 km] to the northeast)
- Scotland
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Scotland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scotland
- Scotland is located in Bon Homme County
- Population from the 2020 Census: 792 people
- Jump to TripAdvisor's Tourism page for Scotland <3>
- Spencer
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Spencer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spencer
- Spencer is located in McCook County
- Population from the 2020 Census: 145 people
- Jump to TripAdvisor's Tourism page for Spencer <3>
- Tripp
(15 miles [24.1 km] to the southwest)
- Tyndall
(29 miles [46.7 km] to the south)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Milltown. If you can help, please contact us through our Feedback Page.
The official website for State of South Dakota: sd.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Milltown) to Point B.Our distance measurements begin at a specific point in Milltown. The point we use is located at these GPS coordinates - Latitude: 43.4237, Longitude: -97.8014 |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |