RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of South Dakota >> Hutchinson County >> Milltown >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
South Dakota

The Commemorative Quarter for South Dakota





Nearest Communities to Milltown,
Listed County-By-County

The purpose of this page is to identify those communities that are closest to Milltown, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Milltown:

We have great-grandparents who lived in a small community in the northeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.

Keep in mind that when we give a distance, it's a 'straight-line' distance starting from Milltown.<1>

If you're researching your genealogy, we hope that the following information helps.

Milltown is located in Hutchinson County.

The following 8 counties adjoin and form the boundaries of Hutchinson County: Bon Homme, Charles Mix, Davison, Douglas, Hanson, McCook, Turner & Yankton.

Our Gazetteer shows that there are 54 communities within 40 miles [64.4 km]<1> of Milltown. Of these communities, 41 are located in counties other than Hutchinson County.

We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.

After starting with the home county for Milltown (which is Hutchinson County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Milltown

For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.

  • Hutchinson County   (where Milltown resides)
    • County Seat for Hutchinson:   Olivet
    • Genealogy Websites   ...
    • Nearest Communities to Milltown   ...
      • These communities are listed by their distance from Milltown.
      • New Elm Springs Colony
        (4 miles [6.4 km] to the north)
        • Note: The GPS coordinates that we are using for New Elm Springs Colony have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for New Elm Springs Colony
        • New Elm Springs Colony is located in Hutchinson County
        • Estimated population in 2014: 600 people
      • Tschetter Colony
        (6 miles [9.7 km] to the southeast)
        • Note: The GPS coordinates that we are using for Tschetter Colony have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Tschetter Colony
        • Tschetter Colony is located in Hutchinson County
        • Estimated population in 2014: 80 people
      • Clayton
        (7 miles [11.3 km] to the east)
        • Note: The GPS coordinates that we are using for Clayton have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Clayton
        • Clayton is located in Hutchinson County
      • Parkston
        (9 miles [14.5 km] to the west)
      • Wolf Creek
        (10 miles [16.1 km] to the southeast)
        • Note: The GPS coordinates that we are using for Wolf Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Wolf Creek
        • Wolf Creek is located in Hutchinson County
        • Estimated population in 2014: 195 people
      • Dimock
        (10 miles [16.1 km] to the west)
        • Note: The GPS coordinates that we are using for Dimock have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Dimock
        • Dimock is located in Hutchinson County
        • Population from the 2020 Census: 171 people
        • Jump to TripAdvisor's Tourism page for Dimock <4>
      • Beardsley
        (12 miles [19.3 km] to the southwest)
        • Note: The GPS coordinates that we are using for Beardsley have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Beardsley
        • Beardsley is located in Hutchinson County
      • Olivet
        (14 miles [22.5 km] to the southeast)
        • Note: The GPS coordinates that we are using for Olivet have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Olivet
        • Olivet is located in Hutchinson County
        • Population from the 2020 Census: 70 people
        • Jump to TripAdvisor's Tourism page for Olivet <4>
      • Tripp
        (15 miles [24.1 km] to the southwest)
        • Jump to our Gazetteer entry for Tripp
        • Tripp is located in Hutchinson County
        • Population from the 2020 Census: 614 people
        • Jump to TripAdvisor's Tourism page for Tripp <4>
      • Kaylor
        (16 miles [25.7 km] to the south)
      • Menno
        (17 miles [27.4 km] to the southeast)
        • Note: The GPS coordinates that we are using for Menno have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Menno
        • Menno is located in Hutchinson County
        • Population from the 2020 Census: 615 people
        • Jump to TripAdvisor's Tourism page for Menno <4>
      • Maxwell Colony
        (18 miles [29 km] to the southeast)
        • Note: The GPS coordinates that we are using for Maxwell Colony have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Maxwell Colony
        • Maxwell Colony is located in Hutchinson County
      • Freeman
        (19 miles [30.6 km] to the east)
  • Bon Homme County
  • Davison County
    • County Website:   www.davisoncounty.org/
    • County Seat for Davison:   Mitchell
    • Genealogy Websites   ...
    • Nearest Communities to Milltown   ...
      • These communities are listed by their distance from Milltown.
      • Ethan
        (12 miles [19.3 km] to the northwest)
      • Mitchell
        (22 miles [35.4 km] to the northwest)
      • Metzgerville
        (24 miles [38.6 km] to the west)
        • Note: The GPS coordinates that we are using for Metzgerville have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Metzgerville
        • Metzgerville is located in Davison County
      • River Bluff Addition
        (25 miles [40.2 km] to the northwest)
        • Note: The GPS coordinates that we are using for River Bluff Addition have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for River Bluff Addition
        • River Bluff Addition is located in Davison County
        • Estimated population in 2014: 13 people
      • Betts
        (26 miles [41.8 km] to the northwest)
        • Note: The GPS coordinates that we are using for Betts have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Betts
        • Betts is located in Davison County
      • Loomis
        (29 miles [46.7 km] to the northwest)
        • Note: The GPS coordinates that we are using for Loomis have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Loomis
        • Loomis is located in Davison County
        • Jump to TripAdvisor's Tourism page for Loomis <4>
      • Mount Vernon
        (30 miles [48.3 km] to the northwest)
        • Note: The GPS coordinates that we are using for Mount Vernon have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Mount Vernon
        • Mount Vernon is located in Davison County
        • Population from the 2020 Census: 438 people
        • Jump to TripAdvisor's Tourism page for Mount Vernon <4>
  • Douglas County
    • County Seat for Douglas:   Armour
    • Genealogy Websites   ...
    • Nearest Communities to Milltown   ...
      • These communities are listed by their distance from Milltown.
      • Hillside
        (20 miles [32.2 km] to the west)
        • Note: The GPS coordinates that we are using for Hillside have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Hillside
        • Hillside is located in Douglas County
        • Estimated population in 2014: 31 people
      • Delmont
        (21 miles [33.8 km] to the southwest)
        • Note: The GPS coordinates that we are using for Delmont have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Delmont
        • Delmont is located in Douglas County
        • Population from the 2020 Census: 215 people
        • Jump to TripAdvisor's Tourism page for Delmont <4>
      • Greenwood Colony
        (22 miles [35.4 km] to the southwest)
        • Note: The GPS coordinates that we are using for Greenwood Colony have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Greenwood Colony
        • Greenwood Colony is located in Douglas County
      • Douglas City ‑ Historic
        (25 miles [40.2 km] to the west)
        • Note: The GPS coordinates that we are using for Douglas City have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Douglas City
        • Douglas City is located in Douglas County
      • Armour
        (28 miles [45.1 km] to the west)
        • Note: The GPS coordinates that we are using for Armour have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Armour
        • Armour is located in Douglas County
        • Population from the 2020 Census: 666 people
        • Jump to TripAdvisor's Tourism page for Armour <4>
      • Grandview ‑ Historic
        (28 miles [45.1 km] to the west)
        • Note: The GPS coordinates that we are using for Grandview have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Grandview
        • Grandview is located in Douglas County
      • Corsica
        (30 miles [48.3 km] to the west)
        • Note: The GPS coordinates that we are using for Corsica have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Corsica
        • Corsica is located in Douglas County
        • Population from the 2020 Census: 569 people
        • Jump to TripAdvisor's Tourism page for Corsica <4>
  • Hanson County
    • County Seat for Hanson:   Alexandria
    • Genealogy Websites   ...
    • Nearest Communities to Milltown   ...
      • These communities are listed by their distance from Milltown.
      • Maywood ‑ Historic
        (9 miles [14.5 km] to the northwest)
        • Note: The GPS coordinates that we are using for Maywood have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Maywood
        • Maywood is located in Hanson County
      • Rockport Colony
        (11 miles [17.7 km] to the north)
        • Note: The GPS coordinates that we are using for Rockport Colony have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Rockport Colony
        • Rockport Colony is located in Hanson County
        • Estimated population in 2014: 32 people
      • Alexandria
        (15 miles [24.1 km] to the north)
        • Note: The GPS coordinates that we are using for Alexandria have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Alexandria
        • Alexandria is located in Hanson County
        • Population from the 2020 Census: 650 people
        • Jump to TripAdvisor's Tourism page for Alexandria <4>
      • Emery
        (15 miles [24.1 km] to the northeast)
        • Note: The GPS coordinates that we are using for Emery have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Emery
        • Emery is located in Hanson County
        • Population from the 2020 Census: 454 people
        • Jump to TripAdvisor's Tourism page for Emery <4>
      • Farmer
        (21 miles [33.8 km] to the north)
        • Jump to our Gazetteer entry for Farmer
        • Farmer is located in Hanson County
        • Population from the 2020 Census: 11 people
      • Fulton
        (21 miles [33.8 km] to the north)
        • Note: The GPS coordinates that we are using for Fulton have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Fulton
        • Fulton is located in Hanson County
        • Population from the 2020 Census: 96 people
        • Jump to TripAdvisor's Tourism page for Fulton <4>
      • Riverside
        (21 miles [33.8 km] to the north)
        • Note: The GPS coordinates that we are using for Riverside have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Riverside
        • Riverside is located in Hanson County
      • Plano
        (27 miles [43.5 km] to the north)
        • Note: The GPS coordinates that we are using for Plano have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Plano
        • Plano is located in Hanson County
        • Estimated population in 2014: 104 people
      • Farwell
        (29 miles [46.7 km] to the north)
        • Note: The GPS coordinates that we are using for Farwell have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Farwell
        • Farwell is located in Hanson County
      • Epiphany
        (30 miles [48.3 km] to the north)
        • Note: The GPS coordinates that we are using for Epiphany have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Epiphany
        • Epiphany is located in Hanson County
        • Estimated population in 2014: 103 people
  • McCook County
    • County Seat for McCook:   Salem
    • Genealogy Websites   ...
    • Nearest Communities to Milltown   ...
      • These communities are listed by their distance from Milltown.
      • Bridgewater
        (17 miles [27.4 km] to the northeast)
      • Stanley Corner
        (22 miles [35.4 km] to the east)
        • Note: The GPS coordinates that we are using for Stanley Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Stanley Corner
        • Stanley Corner is located in McCook County
      • Spencer
        (23 miles [37 km] to the northeast)
        • Note: The GPS coordinates that we are using for Spencer have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Spencer
        • Spencer is located in McCook County
        • Population from the 2020 Census: 145 people
        • Jump to TripAdvisor's Tourism page for Spencer <4>
      • Salem
        (26 miles [41.8 km] to the northeast)
        • Note: The GPS coordinates that we are using for Salem came from an uncertain source and they still need to be verified:<5>
        • Jump to our Gazetteer entry for Salem
        • Salem is located in McCook County
      • Canistota
        (28 miles [45.1 km] to the northeast)
        • Note: The GPS coordinates that we are using for Canistota have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Canistota
        • Canistota is located in McCook County
        • Population from the 2020 Census: 620 people
        • Jump to TripAdvisor's Tourism page for Canistota <4>
      • Salem
        (29 miles [46.7 km] to the northeast)
  • Turner County
    • County Seat for Turner:   Parker
    • Genealogy Websites   ...
    • Nearest Communities to Milltown   ...
      • These communities are listed by their distance from Milltown.
      • Dolton
        (21 miles [33.8 km] to the east)
        • Note: The GPS coordinates that we are using for Dolton have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Dolton
        • Dolton is located in Turner County
        • Population from the 2020 Census: 39 people
      • Marion
        (27 miles [43.5 km] to the east)
      • Monroe
        (29 miles [46.7 km] to the east)
        • Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Monroe
        • Monroe is located in Turner County
        • Population from the 2020 Census: 156 people
        • Jump to TripAdvisor's Tourism page for Monroe <4>
      • Pearsons Corner
        (29 miles [46.7 km] to the southeast)
        • Note: The GPS coordinates that we are using for Pearsons Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Pearsons Corner
        • Pearsons Corner is located in Turner County
      • Turkey Ridge
        (29 miles [46.7 km] to the southeast)
        • Note: The GPS coordinates that we are using for Turkey Ridge have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Turkey Ridge
        • Turkey Ridge is located in Turner County
      • Spring Valley
        (30 miles [48.3 km] to the southeast)
        • Note: The GPS coordinates that we are using for Spring Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Spring Valley
        • Spring Valley is located in Turner County
  • Yankton County
    • County Website:   www.co.yankton.sd.us/
    • County Seat for Yankton:   Yankton
    • Genealogy Websites   ...
    • Nearest Communities to Milltown   ...
      • These communities are listed by their distance from Milltown.
      • Jamesville
        (27 miles [43.5 km] to the southeast)
        • Note: The GPS coordinates that we are using for Jamesville have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Jamesville
        • Jamesville is located in Yankton County
        • Estimated population in 2014: 232 people
      • Lesterville
        (28 miles [45.1 km] to the south)
        • Note: The GPS coordinates that we are using for Lesterville have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lesterville
        • Lesterville is located in Yankton County
        • Population from the 2020 Census: 130 people
        • Jump to TripAdvisor's Tourism page for Lesterville <4>
      • Midway
        (28 miles [45.1 km] to the southeast)
        • Jump to our Gazetteer entry for Midway
        • Midway is located in Yankton County

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Milltown) to Point B.Our distance measurements begin at a specific point in Milltown. The point we use is located at these GPS coordinates - Latitude: 43.4237, Longitude: -97.8014    
<2>Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.

We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.

Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<5>If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024