RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of South Dakota >> Hutchinson County >> Milltown >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
South Dakota

The Commemorative Quarter for South Dakota





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that Milltown had a population of 98 people in 1895 with a post office and no railroad service. In 2014, Milltown had a population of 115 people.

The following communities are listed based on their distance from Milltown, with the one closest to Milltown listed first.

  • Parkston
    (9 miles [14.5 km] to the west)
  • Ethan
    (12 miles [19.3 km] to the northwest)
  • Olivet
    (14 miles [22.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Olivet have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Olivet
    • Olivet is located in Hutchinson County
    • Population from the 2020 Census: 70 people
    • Jump to TripAdvisor's Tourism page for Olivet <2>
  • Tripp
    (15 miles [24.1 km] to the southwest)
  • Emery
    (15 miles [24.1 km] to the northeast)
  • Alexandria
    (15 miles [24.1 km] to the north)
    • Note: The GPS coordinates that we are using for Alexandria have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Alexandria
    • Alexandria is located in Hanson County
    • Population from the 2020 Census: 650 people
    • Jump to TripAdvisor's Tourism page for Alexandria <2>
  • Menno
    (17 miles [27.4 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Menno. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Menno
    • Menno is located in Hutchinson County
    • Population from the 2020 Census: 615 people
    • Jump to TripAdvisor's Tourism page for Menno <2>
    • Google driving directions:
    • From your current location to Menno
    • From Milltown to Menno
  • Bridgewater
    (17 miles [27.4 km] to the northeast)
  • Scotland
    (19 miles [30.6 km] to the south)
    • Note: The GPS coordinates that we are using for Scotland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Scotland
    • Scotland is located in Bon Homme County
    • Population from the 2020 Census: 792 people
    • Jump to TripAdvisor's Tourism page for Scotland <2>
  • Freeman
    (19 miles [30.6 km] to the east)
  • Delmont
    (21 miles [33.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Delmont have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Delmont
    • Delmont is located in Douglas County
    • Population from the 2020 Census: 215 people
    • Jump to TripAdvisor's Tourism page for Delmont <2>
  • Fulton
    (21 miles [33.8 km] to the north)
    • Note: The GPS coordinates that we are using for Fulton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fulton
    • Fulton is located in Hanson County
    • Population from the 2020 Census: 96 people
    • Jump to TripAdvisor's Tourism page for Fulton <2>
  • Farmer
    (21 miles [33.8 km] to the north)
  • Mitchell
    (22 miles [35.4 km] to the northwest)
  • Spencer
    (23 miles [37 km] to the northeast)
    • Note: The GPS coordinates that we are using for Spencer have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spencer
    • Spencer is located in McCook County
    • Population from the 2020 Census: 145 people
    • Jump to TripAdvisor's Tourism page for Spencer <2>
  • Jamesville
    (27 miles [43.5 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Jamesville. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Jamesville
    • Jamesville is located in Yankton County
    • Estimated population in 2014: 232 people
    • Google driving directions:
    • From your current location to Jamesville
    • From Milltown to Jamesville
  • Marion
    (27 miles [43.5 km] to the east)
  • Armour
    (28 miles [45.1 km] to the west)
    • Note: The GPS coordinates that we are using for Armour have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Armour
    • Armour is located in Douglas County
    • Population from the 2020 Census: 666 people
    • Jump to TripAdvisor's Tourism page for Armour <2>
  • Lesterville
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Lesterville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lesterville
    • Lesterville is located in Yankton County
    • Population from the 2020 Census: 130 people
    • Jump to TripAdvisor's Tourism page for Lesterville <2>
  • Canistota
    (28 miles [45.1 km] to the northeast)
  • Grandview ‑ Historic
    (28 miles [45.1 km] to the west)
    • Note: The GPS coordinates that we are using for Grandview have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grandview
    • Grandview is located in Douglas County
  • Farwell
    (29 miles [46.7 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Farwell. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Farwell
    • Farwell is located in Hanson County
    • Google driving directions:
    • From your current location to Farwell
    • From Milltown to Farwell
  • Tyndall
    (29 miles [46.7 km] to the south)
  • Monroe
    (29 miles [46.7 km] to the east)
    • Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Monroe
    • Monroe is located in Turner County
    • Population from the 2020 Census: 156 people
    • Jump to TripAdvisor's Tourism page for Monroe <2>
  • Salem
    (29 miles [46.7 km] to the northeast)

The official website for State of South Dakota: https://www.sd.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Milltown, please let us know so that we can improve our accuracy.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 25 Mar 2025