RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Oregon >> Clackamas County >> Canby >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Oregon

The Commemorative Quarter for Oregon





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Canby (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Canby. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Canby is located in Clackamas County.

To see how the shape of Oregon's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Clackamas County: Hood River, Marion, Multnomah, Wasco, Washington & Yamhill.

Below are the counties that are near Canby. For each of these counties, we show a sample of those communities that are closest to Canby:

  • Clackamas County     (The home county of Canby)
  • Marion County
    • The following are listed by their distance from Canby, with the one closest to Canby listed first.
    • Aurora
      (3 miles [4.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Aurora have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Aurora
      • Aurora is located in Marion County
      • Population from the 2020 Census: 1,039 people
      • Jump to TripAdvisor's Tourism page for Aurora <3>
    • Butteville Station ‑ Historic
      (5 miles [8 km] to the west)
    • Hubbard
      (7 miles [11.3 km] to the southwest)
    • Butteville
      (7 miles [11.3 km] to the west)
    • Donald
      (7 miles [11.3 km] to the west)
      • Note: The GPS coordinates that we are using for Donald have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Donald
      • Donald is located in Marion County
      • Population from the 2020 Census: 1,064 people
      • Jump to TripAdvisor's Tourism page for Donald <3>
    • Champoeg ‑ Historic
      (10 miles [16.1 km] to the west)
    • Woodburn
      (11 miles [17.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Woodburn have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodburn
      • Woodburn is located in Marion County
      • Population from the 2020 Census: 26,175 people
      • Jump to TripAdvisor's Tourism page for Woodburn <3>
    • McKee
      (12 miles [19.3 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for McKee. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for McKee
      • McKee is located in Marion County
      • Google driving directions:
      • From your current location to McKee
      • From Canby to McKee
    • Mount Angel
      (14 miles [22.5 km] to the south)
    • Gervais
      (14 miles [22.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Gervais have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gervais
      • Gervais is located in Marion County
      • Population from the 2020 Census: 2,774 people
      • Jump to TripAdvisor's Tourism page for Gervais <3>
    • Saint Paul
      (14 miles [22.5 km] to the west)
    • Downs
      (15 miles [24.1 km] to the south)
    • Scotts Mills
      (15 miles [24.1 km] to the south)
      • Note: The GPS coordinates that we are using for Scotts Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Scotts Mills
      • Scotts Mills is located in Marion County
      • Population from the 2020 Census: 396 people
      • Jump to TripAdvisor's Tourism page for Scotts Mills <3>
  • Multnomah County
    • The following are listed by their distance from Canby, with the one closest to Canby listed first.
    • Milwaukie
      (13 miles [20.9 km] to the north)
    • Hillsdale
      (14 miles [22.5 km] to the north)
    • Woodstock
      (15 miles [24.1 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Woodstock. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Woodstock
      • Woodstock is located in Multnomah County
      • Google driving directions:
      • From your current location to Woodstock
      • From Canby to Woodstock
    • Portland
      (17 miles [27.4 km] to the north)
    • Laurelhurst
      (18 miles [29 km] to the north)
    • Montavilla
      (18 miles [29 km] to the north)
    • Russellville
      (18 miles [29 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Russellville. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Russellville
      • Russellville is located in Multnomah County
      • Google driving directions:
      • From your current location to Russellville
      • From Canby to Russellville
    • Hazelwood
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Hazelwood have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hazelwood
      • Hazelwood is located in Multnomah County
    • Gresham
      (20 miles [32.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Gresham have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gresham
      • Gresham is located in Multnomah County
      • Population from the 2020 Census: 110,031 people
      • Jump to TripAdvisor's Tourism page for Gresham <3>
    • Rockwood
      (20 miles [32.2 km] to the northeast)
    • Maywood Park
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for Maywood Park have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Maywood Park
      • Maywood Park is located in Multnomah County
      • Population from the 2020 Census: 852 people
      • Jump to TripAdvisor's Tourism page for Maywood Park <3>
    • Powell Valley
      (21 miles [33.8 km] to the northeast)
    • Fairview
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairview
      • Fairview is located in Multnomah County
      • Population from the 2020 Census: 9,450 people
      • Jump to TripAdvisor's Tourism page for Fairview <3>
  • Polk County
    • The following are listed by their distance from Canby, with the one closest to Canby listed first.
    • Lincoln
      (25 miles [40.2 km] to the southwest)
    • Salemtowne
      (26 miles [41.8 km] to the southwest)
    • Zena
      (27 miles [43.5 km] to the southwest)
    • Eola
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Eola have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Eola
      • Eola is located in Polk County
  • Washington County
    • The following are listed by their distance from Canby, with the one closest to Canby listed first.
    • Durham
      (9 miles [14.5 km] to the north)
      • Note: The GPS coordinates that we are using for Durham have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Durham
      • Durham is located in Washington County
      • Population from the 2020 Census: 1,908 people
      • Jump to TripAdvisor's Tourism page for Durham <3>
    • Sherwood
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Sherwood have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sherwood
      • Sherwood is located in Washington County
      • Population from the 2020 Census: 19,746 people
      • Jump to TripAdvisor's Tourism page for Sherwood <3>
    • Middleton
      (10 miles [16.1 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Middleton. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Middleton
      • Middleton is located in Washington County
      • Google driving directions:
      • From your current location to Middleton
      • From Canby to Middleton
    • Tigard
      (11 miles [17.7 km] to the north)
      • Note: The GPS coordinates that we are using for Tigard have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tigard
      • Tigard is located in Washington County
      • Population from the 2020 Census: 56,049 people
      • Jump to TripAdvisor's Tourism page for Tigard <3>
    • King City
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for King City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for King City
      • King City is located in Washington County
      • Population from the 2020 Census: 4,358 people
      • Jump to TripAdvisor's Tourism page for King City <3>
    • Metzger
      (13 miles [20.9 km] to the north)
      • Note: The GPS coordinates that we are using for Metzger have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Metzger
      • Metzger is located in Washington County
    • Progress
      (14 miles [22.5 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Progress. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Progress
      • Progress is located in Washington County
      • Google driving directions:
      • From your current location to Progress
      • From Canby to Progress
    • Kinton ‑ Historic
      (14 miles [22.5 km] to the northwest)
    • Raleigh Hills
      (15 miles [24.1 km] to the north)
    • Scholls
      (15 miles [24.1 km] to the northwest)
    • Beaverton
      (16 miles [25.7 km] to the north)
      • Note: The GPS coordinates that we are using for Beaverton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beaverton
      • Beaverton is located in Washington County
      • Population from the 2020 Census: 98,957 people
      • Jump to TripAdvisor's Tourism page for Beaverton <3>
    • West Slope
      (16 miles [25.7 km] to the north)
      • Note: The GPS coordinates that we are using for West Slope have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Slope
      • West Slope is located in Washington County
    • Cedar Hills
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Cedar Hills have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cedar Hills
      • Cedar Hills is located in Washington County
      • Jump to TripAdvisor's Tourism page for Cedar Hills <3>
  • Yamhill County
    • The following are listed by their distance from Canby, with the one closest to Canby listed first.
    • Newberg
      (13 miles [20.9 km] to the west)
      • Note: The GPS coordinates that we are using for Newberg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Newberg
      • Newberg is located in Yamhill County
      • Population from the 2020 Census: 23,982 people
      • Jump to TripAdvisor's Tourism page for Newberg <3>
    • Dundee
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Dundee have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dundee
      • Dundee is located in Yamhill County
      • Population from the 2020 Census: 3,320 people
      • Jump to TripAdvisor's Tourism page for Dundee <3>
    • Dayton
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Dayton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dayton
      • Dayton is located in Yamhill County
      • Population from the 2020 Census: 2,753 people
      • Jump to TripAdvisor's Tourism page for Dayton <3>
    • Lafayette
      (20 miles [32.2 km] to the west)
    • Hopewell
      (22 miles [35.4 km] to the southwest)
    • Saint Joseph
      (22 miles [35.4 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Saint Joseph. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Saint Joseph
      • Saint Joseph is located in Yamhill County
      • Google driving directions:
      • From your current location to Saint Joseph
      • From Canby to Saint Joseph
    • Carlton
      (23 miles [37 km] to the west)
    • Cove Orchard
      (23 miles [37 km] to the west)
    • Eola Village
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Eola Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Eola Village
      • Eola Village is located in Yamhill County
    • McMinnville
      (24 miles [38.6 km] to the west)
    • Yamhill
      (24 miles [38.6 km] to the west)
    • Whiteson
      (25 miles [40.2 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Whiteson. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Whiteson
      • Whiteson is located in Yamhill County
      • Google driving directions:
      • From your current location to Whiteson
      • From Canby to Whiteson
    • Amity
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Amity have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Amity
      • Amity is located in Yamhill County
      • Population from the 2020 Census: 1,722 people
      • Jump to TripAdvisor's Tourism page for Amity <3>
  • Clark County (WA)
    • The following are listed by their distance from Canby, with the one closest to Canby listed first.
    • Fisher
      (24 miles [38.6 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Fisher. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Fisher
      • Fisher is located in Clark County (WA)
      • Google driving directions:
      • From your current location to Fisher
      • From Canby to Fisher
    • Cascade Park East
      (25 miles [40.2 km] to the north)
    • Cascade Park West
      (25 miles [40.2 km] to the north)
    • Vancouver
      (26 miles [41.8 km] to the north)
    • Camas
      (26 miles [41.8 km] to the northeast)
    • Mill Plain
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Mill Plain have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mill Plain
      • Mill Plain is located in Clark County (WA)
    • Minnehaha
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Minnehaha have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Minnehaha
      • Minnehaha is located in Clark County (WA)
    • Washougal
      (27 miles [43.5 km] to the northeast)
    • Hazel Dell
      (28 miles [45.1 km] to the north)
    • Walnut Grove
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Walnut Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walnut Grove
      • Walnut Grove is located in Clark County (WA)
    • Five Corners
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Five Corners have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Five Corners
      • Five Corners is located in Clark County (WA)
    • Lake Shore
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Lake Shore have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lake Shore
      • Lake Shore is located in Clark County (WA)
    • Fern Prairie
      (29 miles [46.7 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Fern Prairie. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Fern Prairie
      • Fern Prairie is located in Clark County (WA)
      • Google driving directions:
      • From your current location to Fern Prairie
      • From Canby to Fern Prairie

For an expanded list of the communities that are closest to Canby, see our County-by-County Page for Canby.

Cemeteries Near Canby ...

Below are cemeteries that are in the vicinity of Canby.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Canby covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Canby, with the one closest to Canby listed first.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that Canby had a population of 207 people in 1895 with a post office and railroad service. In 2020, Canby had a population of 18,027 people.

These communities are listed based on their distance from Canby, with the one closest to Canby listed first.

  • Barlow
    (Less than 2 miles to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for Barlow. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Barlow
    • Barlow is located in Clackamas County
    • Population from the 2020 Census: 147 people
    • Google driving directions:
    • From your current location to Barlow
    • From Canby to Barlow
  • Aurora
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Aurora have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Aurora
    • Aurora is located in Marion County
    • Population from the 2020 Census: 1,039 people
    • Jump to TripAdvisor's Tourism page for Aurora <3>
  • Macksburg
    (3 miles [4.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Macksburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Macksburg
    • Macksburg is located in Clackamas County
  • New Era ‑ Historic
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for New Era have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Era
    • New Era is located in Clackamas County
  • Carus
    (5 miles [8 km] to the east)
  • Wilsonville
    (5 miles [8 km] to the northwest)
  • Needy ‑ Historic
    (6 miles [9.7 km] to the south)
  • Mulino
    (6 miles [9.7 km] to the southeast)
  • Oregon City
    (6 miles [9.7 km] to the northeast)
  • Canemah
    (6 miles [9.7 km] to the northeast)
  • Hubbard
    (7 miles [11.3 km] to the southwest)
  • Union Mills
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Union Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Union Mills
    • Union Mills is located in Clackamas County
  • Continue List   (19 more) ...

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Canby. See our List of 1890's Communities around Canby.

Newspapers Published in the Vicinity of Canby ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 76 newspapers that have been published in the area around Canby.

We have organized these newspapers into two lists:

  • A Local Newspaper List - focusing on the papers published in the immediate area of Canby. There are actually two parts to this list - papers printed in the immediate area of Canby and those printed in the larger area surrounding Canby.
  • An Extended Newspaper List - a longer list, sorted by paper name and containing those papers published within 13 miles [20.9 km]<6> of Canby.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Canby:

The official website for Canby: www.ci.canby.or.us/

The official website for Clackamas County: www.co.clackamas.or.us/

The official website for State of Oregon: https://www.oregon.gov/

Footnotes ...

<1>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Canby, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Canby) to Point B.Our distance measurements begin at a specific point in Canby. The point we use is located at these GPS coordinates - Latitude: 45.2623, Longitude: -122.6922    









 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025