Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Elrod Mill (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Elrod Mill. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Name Variations for Elrod Mill ...
When searching records, keep in mind that names and their spelling can change over time. Our sources include documents like maps, railroad schedules, Travel, Express and Shipping Guides. Many of these documents date from the 1800's and it's common to find spelling differences.
Although we can't give a definitive list, hopefully the following will give you a feel for the variations that might have occurred.
For example, a typical abbreviation for Elrod Mill: Elrod Ml. (or less commonly used: Elrod Mll.)
If you have information about these names (such as the reason for the change, date of change, the origin of the name), please Contact Us.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Elrod Mill is located in Fannin County.
To see how the shape of Georgia's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Fannin County: Dawson, Gilmer, Lumpkin, Murray, Union, Cherokee (NC) & Polk (TN).
Below are the counties that are near Elrod Mill. For each of these counties, we show a sample of those communities that are closest to Elrod Mill:
- Fannin County (The home county of Elrod Mill)
- The following are listed by their distance from Elrod Mill, with the one closest to Elrod Mill listed first.
- Greens Mill
(Less than 2 miles to the south)
- Note: We haven't been able to verify our GPS coordinates for Greens Mill. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Greens Mill
- Greens Mill is located in Fannin County
- Blue Ridge
(Less than 2 miles to the west)
- Morganton
(3 miles [4.8 km] to the east)
- Mineral Bluff
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Mineral Bluff have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mineral Bluff
- Mineral Bluff is located in Fannin County
- Jump to TripAdvisor's Tourism page for Mineral Bluff <2>
- Cutcane
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Cutcane have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cutcane
- Cutcane is located in Fannin County
- Estimated population in 2019: 3,417 people
- Chestnut Gap
(6 miles [9.7 km] to the west)
- Jump to our Gazetteer entry for Chestnut Gap
- Chestnut Gap is located in Fannin County
- Hemp
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Hemp have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hemp
- Hemp is located in Fannin County
- Population from the 2010 Census: 1,647 people
- Epworth
(7 miles [11.3 km] to the northwest)
- Craytonia
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for Craytonia
- Craytonia is located in Fannin County
- Pantertown
(8 miles [12.9 km] to the north)
- Jump to our Gazetteer entry for Pantertown
- Pantertown is located in Fannin County
- Population from the 2010 Census: 9,749 people
- McCaysville
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for McCaysville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McCaysville
- McCaysville is located in Fannin County
- Population from the 2020 Census: 1,217 people
- Jump to TripAdvisor's Tourism page for McCaysville <2>
- Pierceville
(8 miles [12.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Pierceville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Pierceville
- Pierceville is located in Fannin County
- Fry
(9 miles [14.5 km] to the northwest)
- Jump to our Gazetteer entry for Fry
- Fry is located in Fannin County
- Gilmer County
- The following are listed by their distance from Elrod Mill, with the one closest to Elrod Mill listed first.
- Cherry Log
(7 miles [11.3 km] to the southwest)
- Santaluca
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Santaluca have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Santaluca
- Santaluca is located in Gilmer County
- White Path
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for White Path have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Path
- White Path is located in Gilmer County
- Estimated population in 2019: 342 people
- Northcutt
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Northcutt have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Northcutt
- Northcutt is located in Gilmer County
- Population from the 2010 Census: 16,698 people
- Rolston
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Rolston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rolston
- Rolston is located in Gilmer County
- Estimated population in 2019: 36,716 people
- Tickanetley
(14 miles [22.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Tickanetley. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Tickanetley
- Tickanetley is located in Gilmer County
- Ellijay
(15 miles [24.1 km] to the southwest)
- East Ellijay
(16 miles [25.7 km] to the southwest)
- Yukon
(19 miles [30.6 km] to the southwest)
- Jump to our Gazetteer entry for Yukon
- Yukon is located in Gilmer County
- Tails Creek
(21 miles [33.8 km] to the southwest)
- Jump to our Gazetteer entry for Tails Creek
- Tails Creek is located in Gilmer County
- Population from the 2010 Census: 1,248 people
- Whitestone
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Whitestone have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitestone
- Whitestone is located in Gilmer County
- Lumpkin County
- The following are listed by their distance from Elrod Mill, with the one closest to Elrod Mill listed first.
- Willow ‑ Historic
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Willow have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willow
- Willow is located in Lumpkin County
- Population from the 2010 Census: 15,138 people
- Dahlonega
(29 miles [46.7 km] to the southeast)
- Murray County
- The following are listed by their distance from Elrod Mill, with the one closest to Elrod Mill listed first.
- Cisco
(25 miles [40.2 km] to the west)
- Crandall
(25 miles [40.2 km] to the west)
- Eton
(26 miles [41.8 km] to the west)
- Tennga
(26 miles [41.8 km] to the west)
- Temple Grove
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Temple Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Temple Grove
- Temple Grove is located in Murray County
- Estimated population in 2019: 4,795 people
- Carters
(28 miles [45.1 km] to the southwest)
- Jump to our Gazetteer entry for Carters
- Carters is located in Murray County
- Chatsworth
(28 miles [45.1 km] to the west)
- Gregory
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Gregory have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gregory
- Gregory is located in Murray County
- Population from the 2010 Census: 7,432 people
- Sumac
(28 miles [45.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Sumac. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sumac
- Sumac is located in Murray County
- Ball Ground
(30 miles [48.3 km] to the southwest)
- Jump to our Gazetteer entry for Ball Ground
- Ball Ground is located in Murray County
- Wells ‑ Historic
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Wells have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wells
- Wells is located in Murray County
- Pickens County
- The following are listed by their distance from Elrod Mill, with the one closest to Elrod Mill listed first.
- Talking Rock
(27 miles [43.5 km] to the southwest)
- Big Canoe
(28 miles [45.1 km] to the south)
- Jasper
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Jasper have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jasper
- Jasper is located in Pickens County
- Population from the 2020 Census: 4,037 people
- Jump to TripAdvisor's Tourism page for Jasper <2>
- Marble Hill
(30 miles [48.3 km] to the south)
- Towns County
- The following are listed by their distance from Elrod Mill, with the one closest to Elrod Mill listed first.
- Jacksonville
(25 miles [40.2 km] to the east)
- Jump to our Gazetteer entry for Jacksonville
- Jacksonville is located in Towns County
- Estimated population in 2019: 5,239 people
- Young Harris
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Young Harris have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Young Harris
- Young Harris is located in Towns County
- Population from the 2020 Census: 1,668 people
- Jump to TripAdvisor's Tourism page for Young Harris <2>
- Union County
- The following are listed by their distance from Elrod Mill, with the one closest to Elrod Mill listed first.
- Bethlehem
(12 miles [19.3 km] to the east)
- Jump to our Gazetteer entry for Bethlehem
- Bethlehem is located in Union County
- Youngcane ‑ Historic
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Youngcane have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Youngcane
- Youngcane is located in Union County
- Estimated population in 2019: 1,661 people
- Canal Lake
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Canal Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Canal Lake
- Canal Lake is located in Union County
- Population from the 2010 Census: 23,025 people
- Blairsville
(19 miles [30.6 km] to the east)
- Suches
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Suches have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Suches
- Suches is located in Union County
- Jump to TripAdvisor's Tourism page for Suches <2>
- Owltown
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Owltown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Owltown
- Owltown is located in Union County
- Estimated population in 2019: 2,346 people
- Hood ‑ Historic
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Hood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hood
- Hood is located in Union County
- Choestoe
(24 miles [38.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Choestoe. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Choestoe
- Choestoe is located in Union County
- Cherokee County (NC)
- The following are listed by their distance from Elrod Mill, with the one closest to Elrod Mill listed first.
- Hothouse
(11 miles [17.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Hothouse. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hothouse
- Hothouse is located in Cherokee County (NC)
- Culberson
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for Culberson
- Culberson is located in Cherokee County (NC)
- Burger Town
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Burger Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burger Town
- Burger Town is located in Cherokee County (NC)
- Postell
(15 miles [24.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Postell. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Postell
- Postell is located in Cherokee County (NC)
- Liberty
(17 miles [27.4 km] to the north)
- Jump to our Gazetteer entry for Liberty
- Liberty is located in Cherokee County (NC)
- Vests
(18 miles [29 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Vests. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Vests
- Vests is located in Cherokee County (NC)
- Hiwassee Village
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Hiwassee Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hiwassee Village
- Hiwassee Village is located in Cherokee County (NC)
- Pleasant Hill
(20 miles [32.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Pleasant Hill. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Pleasant Hill
- Pleasant Hill is located in Cherokee County (NC)
- Grape Creek
(21 miles [33.8 km] to the northeast)
- Jump to our Gazetteer entry for Grape Creek
- Grape Creek is located in Cherokee County (NC)
- Murphy
(21 miles [33.8 km] to the northeast)
- Ogreeta
(21 miles [33.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Ogreeta. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ogreeta
- Ogreeta is located in Cherokee County (NC)
- Unaka
(24 miles [38.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Unaka. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Unaka
- Unaka is located in Cherokee County (NC)
- Boiling Springs
(28 miles [45.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Boiling Springs. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Boiling Springs
- Boiling Springs is located in Cherokee County (NC)
- Clay County (NC)
- The following are listed by their distance from Elrod Mill, with the one closest to Elrod Mill listed first.
- Pine Log Village
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Pine Log Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Log Village
- Pine Log Village is located in Clay County (NC)
- Brasstown
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Brasstown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brasstown
- Brasstown is located in Clay County (NC)
- Jump to TripAdvisor's Tourism page for Brasstown <2>
- Warne
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Warne have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Warne
- Warne is located in Clay County (NC)
- Jump to TripAdvisor's Tourism page for Warne <2>
- Hayesville
(29 miles [46.7 km] to the northeast)
- Monroe County (TN)
- The following are listed by their distance from Elrod Mill, with the one closest to Elrod Mill listed first.
- Coker Creek
(27 miles [43.5 km] to the north)
- Jump to our Gazetteer entry for Coker Creek
- Coker Creek is located in Monroe County (TN)
- Epperson
(27 miles [43.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Epperson. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Epperson
- Epperson is located in Monroe County (TN)
- Rural Vale
(30 miles [48.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Rural Vale. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Rural Vale
- Rural Vale is located in Monroe County (TN)
- Polk County (TN)
- The following are listed by their distance from Elrod Mill, with the one closest to Elrod Mill listed first.
- Copperhill
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Copperhill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Copperhill
- Copperhill is located in Polk County (TN)
- Population from the 2020 Census: 316 people
- Jump to TripAdvisor's Tourism page for Copperhill <2>
- Belltown Hill
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Belltown Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belltown Hill
- Belltown Hill is located in Polk County (TN)
- Estimated population in 2014: 2,457 people
- Ducktown
(12 miles [19.3 km] to the northwest)
- Chanceytown
(13 miles [20.9 km] to the north)
- Jump to our Gazetteer entry for Chanceytown
- Chanceytown is located in Polk County (TN)
- Archville
(22 miles [35.4 km] to the northwest)
- Jump to our Gazetteer entry for Archville
- Archville is located in Polk County (TN)
- Ball Play
(25 miles [40.2 km] to the northwest)
- Jump to our Gazetteer entry for Ball Play
- Ball Play is located in Polk County (TN)
- Oldfort
(28 miles [45.1 km] to the northwest)
- Jump to our Gazetteer entry for Oldfort
- Oldfort is located in Polk County (TN)
- Benton
(29 miles [46.7 km] to the northwest)
- Ocoee
(29 miles [46.7 km] to the northwest)
For an expanded list of the communities that are closest to Elrod Mill, see our County-by-County Page for Elrod Mill.
Cemeteries Near Elrod Mill ...
Below are cemeteries that are in the vicinity of Elrod Mill.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Elrod Mill covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Elrod Mill, with the one closest to Elrod Mill listed first.
- Chastain Memorial Park
(Less than 2 miles to the northwest)
- Jump to our Gazetteer entry for the Chastain Memorial Park
- Note: The GPS coordinates that we are using for the Chastain Memorial Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Friendship Cemetery
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for the Friendship Cemetery
- Note: The GPS coordinates that we are using for the Friendship Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Cox Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Cox Cemetery
- Note: The GPS coordinates that we are using for the Cox Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Antioch Cemetery
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for the Antioch Cemetery
- Note: The GPS coordinates that we are using for the Antioch Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Toccoa Cemetery
(2 miles [3.2 km] to the northeast)
- Jump to our Gazetteer entry for the Toccoa Cemetery
- Note: The GPS coordinates that we are using for the Toccoa Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Pleasant Grove Baptist Church Cemetery
(2 miles [3.2 km] to the northwest)
- Curtis Cemetery
(2 miles [3.2 km] to the northwest)
- Jump to our Gazetteer entry for the Curtis Cemetery
- Note: The GPS coordinates that we are using for the Curtis Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Tarpley Cemetery
(3 miles [4.8 km] to the southeast)
- Jump to our Gazetteer entry for the Tarpley Cemetery
- Note: The GPS coordinates that we are using for the Tarpley Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Padena Cemetery
(3 miles [4.8 km] to the southeast)
- Jump to our Gazetteer entry for the Padena Cemetery
- Note: The GPS coordinates that we are using for the Padena Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Weaver Cemetery
(3 miles [4.8 km] to the northwest)
- Jump to our Gazetteer entry for the Weaver Cemetery
- Note: The GPS coordinates that we are using for the Weaver Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Antioch Cemetery
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for the Antioch Cemetery
- Note: The GPS coordinates that we are using for the Antioch Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Hamilton Family Cemetery
(3 miles [4.8 km] to the north)
- Continue List (326 more) ...
- Allen Cemetery
(3 miles [4.8 km] to the northwest)
- Jump to our Gazetteer entry for the Allen Cemetery
- Note: The GPS coordinates that we are using for the Allen Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Douthit Cemetery
(3 miles [4.8 km] to the north)
- Jump to our Gazetteer entry for the Douthit Cemetery
- Note: The GPS coordinates that we are using for the Douthit Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Wilscot Cemetery
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for the Wilscot Cemetery
- Note: The GPS coordinates that we are using for the Wilscot Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
While we didn't find Elrod Mill in the Atlas, the following 1895 communities would have been found near the current location of Elrod Mill.
These communities are listed based on their distance from Elrod Mill, with the one closest to Elrod Mill listed first.
- Blue Ridge
(Less than 2 miles to the west)
- Morganton
(3 miles [4.8 km] to the east)
- Mineral Bluff
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Mineral Bluff have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mineral Bluff
- Mineral Bluff is located in Fannin County
- Jump to TripAdvisor's Tourism page for Mineral Bluff <2>
- Curtis
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Curtis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Curtis
- Curtis is located in Fannin County
- Hothouse
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Hothouse have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hothouse
- Hothouse is located in Fannin County
- Cutcane
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Cutcane have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cutcane
- Cutcane is located in Fannin County
- Estimated population in 2019: 3,417 people
- Cherry Log
(7 miles [11.3 km] to the southwest)
- Hemp
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Hemp have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hemp
- Hemp is located in Fannin County
- Population from the 2010 Census: 1,647 people
- Kyle
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Kyle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kyle
- Kyle is located in Fannin County
- Dora ‑ Historic
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Dora have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dora
- Dora is located in Fannin County
- Craytonia
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for Craytonia
- Craytonia is located in Fannin County
- Pierceville
(8 miles [12.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Pierceville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Pierceville
- Pierceville is located in Fannin County
- Continue List (14 more) ...
- Santaluca
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Santaluca have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Santaluca
- Santaluca is located in Gilmer County
- Pisgah
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Pisgah have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pisgah
- Pisgah is located in Gilmer County
- Sweet Gum
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Sweet Gum have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sweet Gum
- Sweet Gum is located in Fannin County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Elrod Mill. See our List of 1890's Communities around Elrod Mill.
Newspapers Published in Elrod Mill ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 18 newspapers that have been published in the area around Elrod Mill.
Although we're unaware of any newspapers that were published in the immediate area of Elrod Mill, there are papers which were published within 15 miles [24.1 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Elrod Mill.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Elrod Mill:
- Websites specific to Georgia
- Pages specific to Fannin County
- Genealogy information for nearby counties
- Gilmer County
- Lumpkin County
- Murray County
- Pickens County
- Towns County
- Union County
- Cherokee County
- Clay County
- Monroe County
- Polk County
- Cemetery Information and Directories for Georgia
Off-the-Road Links ...
Unfortunately, we don't know of a website for Elrod Mill. If you can help, please contact us through our Feedback Page.
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Elrod Mill, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Elrod Mill) to Point B.Our distance measurements begin at a specific point in Elrod Mill. The point we use is located at these GPS coordinates - Latitude: 34.8670, Longitude: -84.2969 In this case, the coordinates for Elrod Mill have been provided by the Geographic Names Information System (GNIS). |