|
Nearest Communities to Zipperlandville,
Listed County-By-County
The purpose of this page is to identify those communities that are closest to Zipperlandville, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Zipperlandville:
We have great-grandparents who lived in a small community in the northeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.
When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.
Please note that when we give a distance, it's a 'straight-line' distance from Zipperlandville.<1>
If you're researching your genealogy, we hope that the following information helps.
Although our information shows that the community of Zipperlandville<2> is historic,<3> it would have been located within present day Falls County.
The following 5 counties adjoin and form the boundaries of Falls County: Bell, Limestone, McLennan, Milam & Robertson.
Our Gazetteer shows that there are 176 communities within 40 miles [64.4 km]<1> of Zipperlandville. Of these communities, 137 are located in counties other than Falls County.
We usually exclude communities where we still need to verify their location,<4> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.
After starting with the home county for Zipperlandville (which is Falls County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Zipperlandville
For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.
- Falls County (where Zipperlandville resides)
- County Website: https://www.co.falls.tx.us/
- County Seat for Falls: Marlin
- Genealogy Websites ...
- Nearest Communities to Zipperlandville ...
- These communities are listed by their distance from Zipperlandville.
- Terry Chapel
(2 miles [3.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Terry Chapel have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Terry Chapel
- Terry Chapel is located in Falls County
- Wilson
(3 miles [4.8 km] to the south)
- Note: The GPS coordinates that we are using for Wilson have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilson
- Wilson is located in Falls County
- Barclay
(3 miles [4.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Barclay. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Barclay
- Barclay is located in Falls County
- Rosebud
(4 miles [6.4 km] to the east)
- Westphalia
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Westphalia. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Westphalia
- Westphalia is located in Falls County
- Travis
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Travis have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Travis
- Travis is located in Falls County
- Lott
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Lott have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lott
- Lott is located in Falls County
- Population from the 2020 Census: 744 people
- Jump to TripAdvisor's Tourism page for Lott <7>
- Pleasant Grove
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Pleasant Grove have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Grove
- Pleasant Grove is located in Falls County
- Wilderville
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Wilderville. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Wilderville
- Wilderville is located in Falls County
- Durango
(10 miles [16.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Durango. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Durango
- Durango is located in Falls County
- Cedar Springs
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Cedar Springs have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Springs
- Cedar Springs is located in Falls County
- Dott
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Dott have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dott
- Dott is located in Falls County
- Continue List (27 more) ...
- Blevins
(13 miles [20.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Blevins. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Blevins
- Blevins is located in Falls County
- Cego
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Cego have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cego
- Cego is located in Falls County
- Chilton
(14 miles [22.5 km] to the north)
- Tomlinson Hill
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Tomlinson Hill have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tomlinson Hill
- Tomlinson Hill is located in Falls County
- Coymack
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Coymack have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coymack
- Coymack is located in Falls County
- Highbank
(14 miles [22.5 km] to the northeast)
- Jump to our Gazetteer entry for Highbank
- Highbank is located in Falls County
- Eloise
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Eloise have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eloise
- Eloise is located in Falls County
- Triangle
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Triangle have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Triangle
- Triangle is located in Falls County
- Mooreville
(16 miles [25.7 km] to the north)
- Jump to our Gazetteer entry for Mooreville
- Mooreville is located in Falls County
- Beacon
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Beacon have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beacon
- Beacon is located in Falls County
- Sunrise
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Sunrise have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sunrise
- Sunrise is located in Falls County
- North Prairie
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for North Prairie have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Prairie
- North Prairie is located in Falls County
- Marlin
(18 miles [29 km] to the northeast)
- Satin
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Satin have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Satin
- Satin is located in Falls County
- Jump to TripAdvisor's Tourism page for Satin <7>
- Reagan
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Reagan have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reagan
- Reagan is located in Falls County
- Jump to TripAdvisor's Tourism page for Reagan <7>
- Golinda
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Golinda have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Golinda
- Golinda is located in Falls County
- Population from the 2020 Census: 610 people
- Guda
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Guda have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Guda
- Guda is located in Falls County
- Rocky Hill
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Rocky Hill have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rocky Hill
- Rocky Hill is located in Falls County
- Bruceville - Eddy
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Bruceville - Eddy have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bruceville - Eddy
- Bruceville - Eddy is located in Falls County
- Population from the 2020 Census: 1,704 people
- Blue Ridge
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Blue Ridge have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blue Ridge
- Blue Ridge is located in Falls County
- McClanahan
(23 miles [37 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for McClanahan. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for McClanahan
- McClanahan is located in Falls County
- Perry
(25 miles [40.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Perry. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Perry
- Perry is located in Falls County
- Jump to TripAdvisor's Tourism page for Perry <7>
- Long Branch
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Long Branch have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Long Branch
- Long Branch is located in Falls County
- Stranger
(26 miles [41.8 km] to the northeast)
- Jump to our Gazetteer entry for Stranger
- Stranger is located in Falls County
- Alto Springs
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Alto Springs have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alto Springs
- Alto Springs is located in Falls County
- Mustang
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Mustang have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mustang
- Mustang is located in Falls County
- Otto
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Otto have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Otto
- Otto is located in Falls County
- Jump to TripAdvisor's Tourism page for Otto <7>
- Bell County
- County Website: https://www.bellcountytx.com/
- County Seat for Bell: Belton
- Genealogy Websites ...
- Nearest Communities to Zipperlandville ...
- These communities are listed by their distance from Zipperlandville.
- Ocker
(5 miles [8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Ocker. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Ocker
- Ocker is located in Bell County
- Cyclone
(6 miles [9.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Cyclone. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Cyclone
- Cyclone is located in Bell County
- Meeks
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Meeks have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meeks
- Meeks is located in Bell County
- Airville
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Airville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Airville
- Airville is located in Bell County
- Zabcikville
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Zabcikville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zabcikville
- Zabcikville is located in Bell County
- Red Ranger
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Red Ranger have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Ranger
- Red Ranger is located in Bell County
- Edgeworth
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Edgeworth. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Edgeworth
- Edgeworth is located in Bell County
- New Colony
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for New Colony have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Colony
- New Colony is located in Bell County
- Ratibor
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Ratibor have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ratibor
- Ratibor is located in Bell County
- Seaton
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Seaton have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seaton
- Seaton is located in Bell County
- Leedale
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Leedale have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leedale
- Leedale is located in Bell County
- Belfalls
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Belfalls have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belfalls
- Belfalls is located in Bell County
- Continue List (39 more) ...
- Oenaville
(11 miles [17.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Oenaville. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Oenaville
- Oenaville is located in Bell County
- Stringtown
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Stringtown have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stringtown
- Stringtown is located in Bell County
- Oscar
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Oscar have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oscar
- Oscar is located in Bell County
- Rogers
(13 miles [20.9 km] to the southwest)
- Heidenheimer
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Heidenheimer have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Heidenheimer
- Heidenheimer is located in Bell County
- Jump to TripAdvisor's Tourism page for Heidenheimer <7>
- Berger
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Berger have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Berger
- Berger is located in Bell County
- Troy
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Troy have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Troy
- Troy is located in Bell County
- Population from the 2020 Census: 2,191 people
- Jump to TripAdvisor's Tourism page for Troy <7>
- Joe Lee
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Joe Lee have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Joe Lee
- Joe Lee is located in Bell County
- Belco
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Belco have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belco
- Belco is located in Bell County
- Smith
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Smith have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smith
- Smith is located in Bell County
- Temple
(17 miles [27.4 km] to the west)
- Academy
(18 miles [29 km] to the west)
- Jump to our Gazetteer entry for Academy
- Academy is located in Bell County
- Gober
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Gober have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gober
- Gober is located in Bell County
- Little River-Academy
(18 miles [29 km] to the west)
- Jump to our Gazetteer entry for Little River-Academy
- Little River-Academy is located in Bell County
- Population from the 2020 Census: 2,048 people
- Pendleton
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Pendleton have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pendleton
- Pendleton is located in Bell County
- Jump to TripAdvisor's Tourism page for Pendleton <7>
- Little River
(19 miles [30.6 km] to the west)
- Sparks
(20 miles [32.2 km] to the southwest)
- Jump to our Gazetteer entry for Sparks
- Sparks is located in Bell County
- Vilas
(21 miles [33.8 km] to the southwest)
- Jump to our Gazetteer entry for Vilas
- Vilas is located in Bell County
- Midway
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Midway have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midway
- Midway is located in Bell County
- Hobbs
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Hobbs have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hobbs
- Hobbs is located in Bell County
- Donahoe
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Donahoe have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Donahoe
- Donahoe is located in Bell County
- Childers Mill ‑ Historic
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Childers Mill have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Childers Mill
- Childers Mill is located in Bell County
- Sommers Mill
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Sommers Mill have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sommers Mill
- Sommers Mill is located in Bell County
- White Hall
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for White Hall have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Hall
- White Hall is located in Bell County
- Holland
(24 miles [38.6 km] to the southwest)
- Belton
(24 miles [38.6 km] to the west)
- Morgan's Point Resort
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Morgan's Point Resort have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morgan's Point Resort
- Morgan's Point Resort is located in Bell County
- Population from the 2020 Census: 4,785 people
- Jump to TripAdvisor's Tourism page for Morgan's Point Resort <7>
- Stampede
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Stampede have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stampede
- Stampede is located in Bell County
- Dog Ridge ‑ Historic
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Dog Ridge have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dog Ridge
- Dog Ridge is located in Bell County
- Moffat
(26 miles [41.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Moffat. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Moffat
- Moffat is located in Bell County
- Woodland
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Woodland have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodland
- Woodland is located in Bell County
- Jubilee Springs
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Jubilee Springs have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jubilee Springs
- Jubilee Springs is located in Bell County
- Westcliff
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Westcliff have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westcliff
- Westcliff is located in Bell County
- Meador Grove
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Meador Grove have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meador Grove
- Meador Grove is located in Bell County
- Bland
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Bland have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bland
- Bland is located in Bell County
- Bartlett
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Bartlett have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bartlett
- Bartlett is located in Bell County
- Population from the 2020 Census: 1,766 people
- Jump to TripAdvisor's Tourism page for Bartlett <7>
- Owl Creek
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Owl Creek have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Owl Creek
- Owl Creek is located in Bell County
- Salado
(29 miles [46.7 km] to the west)
- Union Hill
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Union Hill have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union Hill
- Union Hill is located in Bell County
- Coryell County
- County Website: https://www.coryellcounty.org/
- County Seat for Coryell: Gatesville
- Genealogy Websites ...
- Nearest Communities to Zipperlandville ...
- Whitson
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Whitson have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitson
- Whitson is located in Coryell County
- Dickens County
- County Website: https://www.co.dickens.tx.us/
- County Seat for Dickens: Dickens
- Genealogy Websites ...
- Nearest Communities to Zipperlandville ...
- Wilson
(3 miles [4.8 km] to the south)
- Note: The GPS coordinates that we are using for Wilson have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilson
- Wilson is located in Dickens County
- Limestone County
- County Website: https://www.co.limestone.tx.us/
- County Seat for Limestone: Groesbeck
- Genealogy Websites ...
- Nearest Communities to Zipperlandville ...
- These communities are listed by their distance from Zipperlandville.
- Kosse
(29 miles [46.7 km] to the northeast)
- Odds ‑ Historic
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Odds have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Odds
- Odds is located in Limestone County
- McLennan County
- County Website: https://www.mclennan.gov/
- County Seat for McLennan: Waco
- Genealogy Websites ...
- Nearest Communities to Zipperlandville ...
- These communities are listed by their distance from Zipperlandville.
- Eddy
(19 miles [30.6 km] to the northwest)
- Bruceville
(20 miles [32.2 km] to the northwest)
- Levi
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Levi have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Levi
- Levi is located in McLennan County
- Asa
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Asa have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Asa
- Asa is located in McLennan County
- Lorena
(23 miles [37 km] to the northwest)
- Jump to our Gazetteer entry for Lorena
- Lorena is located in McLennan County
- Rosenthal
(24 miles [38.6 km] to the north)
- Jump to our Gazetteer entry for Rosenthal
- Rosenthal is located in McLennan County
- Moody
(24 miles [38.6 km] to the northwest)
- Downs
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Downs have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Downs
- Downs is located in McLennan County
- Downsville
(26 miles [41.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Downsville. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Downsville
- Downsville is located in McLennan County
- Spring Valley
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Spring Valley have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Valley
- Spring Valley is located in McLennan County
- Robinson
(27 miles [43.5 km] to the north)
- Hewitt
(28 miles [45.1 km] to the north)
- Continue List (4 more) ...
- Riesel
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Riesel have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riesel
- Riesel is located in McLennan County
- Population from the 2020 Census: 1,049 people
- Jump to TripAdvisor's Tourism page for Riesel <7>
- Atco
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Atco have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atco
- Atco is located in McLennan County
- Blackland
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Blackland have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blackland
- Blackland is located in McLennan County
- Ritchie
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Ritchie have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ritchie
- Ritchie is located in McLennan County
- Milam County
- County Website: https://www.milamcounty.net/
- County Seat for Milam: Cameron
- Genealogy Websites ...
- Nearest Communities to Zipperlandville ...
- These communities are listed by their distance from Zipperlandville.
- Burlington
(5 miles [8 km] to the southeast)
- Yarrelton
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Yarrelton have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yarrelton
- Yarrelton is located in Milam County
- Ben Arnold
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Ben Arnold have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ben Arnold
- Ben Arnold is located in Milam County
- Briary
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Briary have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Briary
- Briary is located in Milam County
- North Elm
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for North Elm have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Elm
- North Elm is located in Milam County
- Clarkson
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Clarkson have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarkson
- Clarkson is located in Milam County
- New Clarkson
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for New Clarkson have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Clarkson
- New Clarkson is located in Milam County
- South Elm
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for South Elm have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Elm
- South Elm is located in Milam County
- Marak
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Marak have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marak
- Marak is located in Milam County
- Splawn
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Splawn have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Splawn
- Splawn is located in Milam County
- Silver City
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Silver City have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silver City
- Silver City is located in Milam County
- Baileyville
(13 miles [20.9 km] to the east)
- Jump to our Gazetteer entry for Baileyville
- Baileyville is located in Milam County
- Continue List (34 more) ...
- Buckholts
(13 miles [20.9 km] to the south)
- Bowers
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Bowers have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bowers
- Bowers is located in Milam County
- Quinif
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Quinif have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Quinif
- Quinif is located in Milam County
- Belmena
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Belmena have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belmena
- Belmena is located in Milam County
- Jones Prairie
(14 miles [22.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Jones Prairie. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Jones Prairie
- Jones Prairie is located in Milam County
- Cameron
(15 miles [24.1 km] to the south)
- Elm Ridge
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Elm Ridge have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elm Ridge
- Elm Ridge is located in Milam County
- Pettibone
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Pettibone have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pettibone
- Pettibone is located in Milam County
- Maysfield
(16 miles [25.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Maysfield. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Maysfield
- Maysfield is located in Milam County
- Jump to TripAdvisor's Tourism page for Maysfield <7>
- Salem
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salem
- Salem is located in Milam County
- Crossroads
(17 miles [27.4 km] to the southeast)
- Jump to our Gazetteer entry for Crossroads
- Crossroads is located in Milam County
- Marlow
(17 miles [27.4 km] to the southeast)
- Jump to our Gazetteer entry for Marlow
- Marlow is located in Milam County
- Cummins Crossing
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Cummins Crossing have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cummins Crossing
- Cummins Crossing is located in Milam County
- Val Verde
(19 miles [30.6 km] to the southwest)
- Jump to our Gazetteer entry for Val Verde
- Val Verde is located in Milam County
- Minerva
(21 miles [33.8 km] to the south)
- Jump to our Gazetteer entry for Minerva
- Minerva is located in Milam County
- Branchville
(21 miles [33.8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Branchville. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Branchville
- Branchville is located in Milam County
- Hoyte
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Hoyte have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hoyte
- Hoyte is located in Milam County
- The Crossroads
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for The Crossroads have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for The Crossroads
- The Crossroads is located in Milam County
- Sharp
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Sharp have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sharp
- Sharp is located in Milam County
- Tracy
(22 miles [35.4 km] to the south)
- Jump to our Gazetteer entry for Tracy
- Tracy is located in Milam County
- Hanover
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Hanover have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hanover
- Hanover is located in Milam County
- Liberty
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liberty
- Liberty is located in Milam County
- Davilla
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Davilla have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Davilla
- Davilla is located in Milam County
- Jump to TripAdvisor's Tourism page for Davilla <7>
- Port Sullivan ‑ Historic
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Port Sullivan have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Port Sullivan
- Port Sullivan is located in Milam County
- Liberty Hill
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Liberty Hill have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liberty Hill
- Liberty Hill is located in Milam County
- San Gabriel
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for San Gabriel have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for San Gabriel
- San Gabriel is located in Milam County
- Gause
(27 miles [43.5 km] to the southeast)
- Milano
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Milano have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milano
- Milano is located in Milam County
- Population from the 2020 Census: 420 people
- Jump to TripAdvisor's Tourism page for Milano <7>
- Rockdale
(28 miles [45.1 km] to the south)
- Nashville ‑ Historic
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Nashville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nashville
- Nashville is located in Milam County
- Detmold
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Detmold have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Detmold
- Detmold is located in Milam County
- Handy
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Handy have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Handy
- Handy is located in Milam County
- Marjorie
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Marjorie have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marjorie
- Marjorie is located in Milam County
- Praesel
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Praesel have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Praesel
- Praesel is located in Milam County
- Robertson County
- County Website: https://www.co.robertson.tx.us/
- County Seat for Robertson: Franklin
- Genealogy Websites ...
- Nearest Communities to Zipperlandville ...
- These communities are listed by their distance from Zipperlandville.
- Salter
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Salter have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salter
- Salter is located in Robertson County
- Hammond
(20 miles [32.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Hammond. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Hammond
- Hammond is located in Robertson County
- Calvert Junction
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Calvert Junction have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calvert Junction
- Calvert Junction is located in Robertson County
- Hogg
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Hogg have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hogg
- Hogg is located in Robertson County
- Barton
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Barton have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barton
- Barton is located in Robertson County
- Bremond
(23 miles [37 km] to the east)
- Calvert
(23 miles [37 km] to the east)
- Tidwell Prairie
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Tidwell Prairie have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tidwell Prairie
- Tidwell Prairie is located in Robertson County
- Marvin
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Marvin have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marvin
- Marvin is located in Robertson County
- Port Sullivan
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Port Sullivan have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Port Sullivan
- Port Sullivan is located in Robertson County
- Goodland
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Goodland have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goodland
- Goodland is located in Robertson County
- Nesbitt
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Nesbitt have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nesbitt
- Nesbitt is located in Robertson County
- Continue List (4 more) ...
- Seger
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Seger have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seger
- Seger is located in Robertson County
- Elliot
(29 miles [46.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Elliot. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Elliot
- Elliot is located in Robertson County
- Valley Junction
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Valley Junction have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Valley Junction
- Valley Junction is located in Robertson County
- Hearne
(30 miles [48.3 km] to the southeast)
- Williamson County
- County Website: https://www.wilcotx.gov/
- County Seat for Williamson: Georgetown
- Genealogy Websites ...
- Nearest Communities to Zipperlandville ...
- These communities are listed by their distance from Zipperlandville.
- Friendship ‑ Historic
(29 miles [46.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Friendship. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Friendship
- Friendship is located in Williamson County
- Laneport
(29 miles [46.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Laneport. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Laneport
- Laneport is located in Williamson County
- Elm Grove
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Elm Grove have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elm Grove
- Elm Grove is located in Williamson County
- Hare
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Hare have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hare
- Hare is located in Williamson County
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Zipperlandville) to Point B.Our distance measurements begin at a specific point in Zipperlandville. The point we use is located at these GPS coordinates - Latitude: 31.0688, Longitude: -97.0553 In this case, the coordinates for Zipperlandville have been provided by the Geographic Names Information System (GNIS). |
| <2> | Zipperlandville is also known as Zipperlen or Zipperlenville. For more information, please visit our Genealogy Helper Page for Zipperlandville. |
| <3> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Zipperlandville, please let us know so that we can improve our accuracy. |
| <4> | Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.
We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.
Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know. |
| <5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <6> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <7> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|