Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Robertsville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Robertsville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals and doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Robertsville is located in Anderson County.
To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Anderson County: Campbell, Knox, Loudon, Morgan, Roane, Scott & Union.
Below are the counties that are near Robertsville. For each of these counties, we show a sample of those communities that are closest to Robertsville:
- Anderson County (The home county of Robertsville)
- The following are listed by their distance from Robertsville, with the one closest to Robertsville listed first.
- Fairview ‑ Historic
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Anderson County
- Oliver Springs
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Oliver Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oliver Springs
- Oliver Springs is located in Anderson County
- Population from the 2020 Census: 3,439 people
- Jump to TripAdvisor's Tourism page for Oliver Springs <2>
- Oak Ridge
(3 miles [4.8 km] to the south)
- Note: The GPS coordinates that we are using for Oak Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Ridge
- Oak Ridge is located in Anderson County
- Population from the 2020 Census: 29,340 people
- Jump to TripAdvisor's Tourism page for Oak Ridge <2>
- Scarboro
(3 miles [4.8 km] to the southeast)
- Leinarts
(7 miles [11.3 km] to the northeast)
- Spring Hill
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Spring Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Hill
- Spring Hill is located in Anderson County
- Estimated population in 2014: 16,752 people
- Claxton
(9 miles [14.5 km] to the east)
- Clinton
(9 miles [14.5 km] to the northeast)
- Peak
(9 miles [14.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Peak. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Peak
- Peak is located in Anderson County
- Google driving directions:
- From your current location to Peak
- From Robertsville to Peak
- Fraterville
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Fraterville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fraterville
- Fraterville is located in Anderson County
- Estimated population in 2014: 70,612 people
- Bethel
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Bethel have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethel
- Bethel is located in Anderson County
- Estimated population in 2014: 719 people
- Panther ‑ Historic
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Panther have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Panther
- Panther is located in Anderson County
- Blount County
- The following are listed by their distance from Robertsville, with the one closest to Robertsville listed first.
- Louisville
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Louisville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Louisville
- Louisville is located in Blount County
- Population from the 2020 Census: 4,139 people
- Jump to TripAdvisor's Tourism page for Louisville <2>
- Kiser
(19 miles [30.6 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Kiser. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Kiser
- Kiser is located in Blount County
- Google driving directions:
- From your current location to Kiser
- From Robertsville to Kiser
- Friendsville
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Friendsville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Friendsville
- Friendsville is located in Blount County
- Population from the 2020 Census: 902 people
- Jump to TripAdvisor's Tourism page for Friendsville <2>
- McMullens
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for McMullens have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McMullens
- McMullens is located in Blount County
- Estimated population in 2014: 13,620 people
- Alcoa
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Alcoa have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alcoa
- Alcoa is located in Blount County
- Population from the 2020 Census: 10,382 people
- Jump to TripAdvisor's Tourism page for Alcoa <2>
- Big Springs
(21 miles [33.8 km] to the southeast)
- Rockford
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Rockford have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockford
- Rockford is located in Blount County
- Population from the 2020 Census: 851 people
- Cloyd Creek ‑ Historic
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Cloyd Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cloyd Creek
- Cloyd Creek is located in Blount County
- Rockgardens
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Rockgardens have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockgardens
- Rockgardens is located in Blount County
- Estimated population in 2014: 861 people
- Binfield
(24 miles [38.6 km] to the southeast)
- Eagleton Village
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Eagleton Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eagleton Village
- Eagleton Village is located in Blount County
- Population from the 2010 Census: 5,052 people
- Fairway Estates
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Fairway Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairway Estates
- Fairway Estates is located in Blount County
- Estimated population in 2014: 8,224 people
- Campbell County
- The following are listed by their distance from Robertsville, with the one closest to Robertsville listed first.
- Shea
(15 miles [24.1 km] to the north)
- Pine Crest
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Pine Crest have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Crest
- Pine Crest is located in Campbell County
- Population from the 2010 Census: 2,388 people
- Caryville
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Caryville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Caryville
- Caryville is located in Campbell County
- Population from the 2020 Census: 2,122 people
- Jump to TripAdvisor's Tourism page for Caryville <2>
- Silica
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Silica have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silica
- Silica is located in Campbell County
- Estimated population in 2014: 105 people
- Hatmaker ‑ Historic
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Hatmaker have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hatmaker
- Hatmaker is located in Campbell County
- Jacksboro
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Jacksboro have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jacksboro
- Jacksboro is located in Campbell County
- Population from the 2020 Census: 2,066 people
- Jump to TripAdvisor's Tourism page for Jacksboro <2>
- Demory
(25 miles [40.2 km] to the northeast)
- Forkvale ‑ Historic
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Forkvale have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forkvale
- Forkvale is located in Campbell County
- LaFollette
(26 miles [41.8 km] to the north)
- Boy ‑ Historic
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Boy have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boy
- Boy is located in Campbell County
- Girlton ‑ Historic
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Girlton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Girlton
- Girlton is located in Campbell County
- Fincastle
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Fincastle have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fincastle
- Fincastle is located in Campbell County
- Population from the 2010 Census: 1,618 people
- Cumberland County
- The following are listed by their distance from Robertsville, with the one closest to Robertsville listed first.
- Rogers
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Rogers have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rogers
- Rogers is located in Cumberland County
- Estimated population in 2014: 4,406 people
- Hebbertsburg
(29 miles [46.7 km] to the west)
- Knox County
- The following are listed by their distance from Robertsville, with the one closest to Robertsville listed first.
- Volunteer Village
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Volunteer Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Volunteer Village
- Volunteer Village is located in Knox County
- Karns
(9 miles [14.5 km] to the east)
- Oak Grove Heights
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Oak Grove Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Grove Heights
- Oak Grove Heights is located in Knox County
- Population from the 2010 Census: 4,425 people
- Farragut
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Farragut have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Farragut
- Farragut is located in Knox County
- Population from the 2020 Census: 24,045 people
- Jump to TripAdvisor's Tourism page for Farragut <2>
- Belle Aire
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Belle Aire have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belle Aire
- Belle Aire is located in Knox County
- Estimated population in 2014: 512 people
- Hunting Hills West
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Hunting Hills West have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hunting Hills West
- Hunting Hills West is located in Knox County
- Estimated population in 2014: 3,970 people
- Middlebrook Acres
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Middlebrook Acres have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middlebrook Acres
- Middlebrook Acres is located in Knox County
- Estimated population in 2014: 593 people
- Boyd
(12 miles [19.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Boyd. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Boyd
- Boyd is located in Knox County
- Google driving directions:
- From your current location to Boyd
- From Robertsville to Boyd
- Concord
(12 miles [19.3 km] to the southeast)
- Virtue
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Virtue have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Virtue
- Virtue is located in Knox County
- Estimated population in 2014: 131 people
- Heiskell
(13 miles [20.9 km] to the east)
- Ebenezer
(13 miles [20.9 km] to the southeast)
- Loudon County
- The following are listed by their distance from Robertsville, with the one closest to Robertsville listed first.
- Vancouver ‑ Historic
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Vancouver have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vancouver
- Vancouver is located in Loudon County
- White Wing Ferry
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for White Wing Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Wing Ferry
- White Wing Ferry is located in Loudon County
- Estimated population in 2014: 4,550 people
- Eaton Crossroads
(12 miles [19.3 km] to the south)
- Sharp Estates
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Sharp Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sharp Estates
- Sharp Estates is located in Loudon County
- Estimated population in 2014: 919 people
- Lenoir City
(14 miles [22.5 km] to the south)
- Loudon
(19 miles [30.6 km] to the south)
- Centersville
(20 miles [32.2 km] to the south)
- Loudon City Park
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Loudon City Park have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loudon City Park
- Loudon City Park is located in Loudon County
- Alleghany ‑ Historic
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Alleghany have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alleghany
- Alleghany is located in Loudon County
- Estimated population in 2014: 630 people
- Philadelphia
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Philadelphia have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Philadelphia
- Philadelphia is located in Loudon County
- Population from the 2020 Census: 740 people
- Jump to TripAdvisor's Tourism page for Philadelphia <2>
- Greenback
(25 miles [40.2 km] to the south)
- Jena
(25 miles [40.2 km] to the south)
- Monroe County
- The following are listed by their distance from Robertsville, with the one closest to Robertsville listed first.
- Vonore
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Vonore have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vonore
- Vonore is located in Monroe County
- Population from the 2020 Census: 1,580 people
- Jump to TripAdvisor's Tourism page for Vonore <2>
- Tuskeegee ‑ Historic
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Tuskeegee have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tuskeegee
- Tuskeegee is located in Monroe County
- Estimated population in 2014: 2,663 people
- Sweetwater
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Sweetwater have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sweetwater
- Sweetwater is located in Monroe County
- Population from the 2020 Census: 5,956 people
- Jump to TripAdvisor's Tourism page for Sweetwater <2>
- Morgan County
- The following are listed by their distance from Robertsville, with the one closest to Robertsville listed first.
- Tupper Town
(4 miles [6.4 km] to the northwest)
- Coalfield
(8 miles [12.9 km] to the west)
- Blue Gem ‑ Historic
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Blue Gem. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Blue Gem
- Blue Gem is located in Morgan County
- Google driving directions:
- From your current location to Blue Gem
- From Robertsville to Blue Gem
- Coal Hill
(10 miles [16.1 km] to the west)
- Petros
(11 miles [17.7 km] to the northwest)
- Oakdale
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Oakdale have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakdale
- Oakdale is located in Morgan County
- Population from the 2020 Census: 207 people
- Mahan Village
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Mahan Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mahan Village
- Mahan Village is located in Morgan County
- Deermont
(17 miles [27.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Deermont. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Deermont
- Deermont is located in Morgan County
- Google driving directions:
- From your current location to Deermont
- From Robertsville to Deermont
- Harriman
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Harriman have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harriman
- Harriman is located in Morgan County
- Population from the 2020 Census: 6,182 people
- Jump to TripAdvisor's Tourism page for Harriman <2>
- Wartburg
(19 miles [30.6 km] to the west)
- Nemo
(21 miles [33.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Nemo. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Nemo
- Nemo is located in Morgan County
- Google driving directions:
- From your current location to Nemo
- From Robertsville to Nemo
- Catoosa ‑ Historic
(22 miles [35.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Catoosa. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Catoosa
- Catoosa is located in Morgan County
- Google driving directions:
- From your current location to Catoosa
- From Robertsville to Catoosa
- Roane County
- The following are listed by their distance from Robertsville, with the one closest to Robertsville listed first.
- Ethel ‑ Historic
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Ethel have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ethel
- Ethel is located in Roane County
- Estimated population in 2014: 2,049 people
- Bear ‑ Historic
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Bear have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bear
- Bear is located in Roane County
- Kelley Town
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Kelley Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kelley Town
- Kelley Town is located in Roane County
- Wheat ‑ Historic
(7 miles [11.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Wheat. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Wheat
- Wheat is located in Roane County
- Google driving directions:
- From your current location to Wheat
- From Robertsville to Wheat
- Dyllis
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Dyllis. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Dyllis
- Dyllis is located in Roane County
- Google driving directions:
- From your current location to Dyllis
- From Robertsville to Dyllis
- Selkirk ‑ Historic
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Selkirk have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Selkirk
- Selkirk is located in Roane County
- Bradbury
(11 miles [17.7 km] to the southwest)
- Kries
(11 miles [17.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Kries. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Kries
- Kries is located in Roane County
- Google driving directions:
- From your current location to Kries
- From Robertsville to Kries
- Bazel Town
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Bazel Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bazel Town
- Bazel Town is located in Roane County
- Cave Creek
(15 miles [24.1 km] to the southwest)
- Laddie Village
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Laddie Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laddie Village
- Laddie Village is located in Roane County
- Kingston
(16 miles [25.7 km] to the southwest)
- Scott County
- The following are listed by their distance from Robertsville, with the one closest to Robertsville listed first.
- Hembree
(16 miles [25.7 km] to the northwest)
- Smoky Junction
(19 miles [30.6 km] to the north)
- Montgomery
(22 miles [35.4 km] to the north)
- Norma
(23 miles [37 km] to the north)
- Hughett
(24 miles [38.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Hughett. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hughett
- Hughett is located in Scott County
- Google driving directions:
- From your current location to Hughett
- From Robertsville to Hughett
- Straight Fork
(25 miles [40.2 km] to the north)
- Winona
(26 miles [41.8 km] to the north)
- Elgin
(28 miles [45.1 km] to the northwest)
- Glenmary
(28 miles [45.1 km] to the northwest)
- New River
(29 miles [46.7 km] to the northwest)
- Robbins
(29 miles [46.7 km] to the northwest)
- Huntsville
(30 miles [48.3 km] to the northwest)
- Sevier County
- Seymour Heights
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Seymour Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seymour Heights
- Seymour Heights is located in Sevier County
- Population from the 2010 Census: 10,919 people
- Union County
- The following are listed by their distance from Robertsville, with the one closest to Robertsville listed first.
- Gabe ‑ Historic
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Gabe have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gabe
- Gabe is located in Union County
- Loyston ‑ Historic
(24 miles [38.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Loyston. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Loyston
- Loyston is located in Union County
- Google driving directions:
- From your current location to Loyston
- From Robertsville to Loyston
- Paulette
(24 miles [38.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Paulette. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Paulette
- Paulette is located in Union County
- Google driving directions:
- From your current location to Paulette
- From Robertsville to Paulette
- Warwicktown
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Warwicktown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Warwicktown
- Warwicktown is located in Union County
- Estimated population in 2014: 658 people
- Plainview
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Union County
- Population from the 2020 Census: 2,184 people
- Lost Creek ‑ Historic
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Lost Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lost Creek
- Lost Creek is located in Union County
- Maynardville
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Maynardville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maynardville
- Maynardville is located in Union County
- Population from the 2020 Census: 2,452 people
- Jump to TripAdvisor's Tourism page for Maynardville <2>
For an expanded list of the communities that are closest to Robertsville, see our County-by-County Page for Robertsville.
Cemeteries Near Robertsville ...
Below are cemeteries that are in the vicinity of Robertsville.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Robertsville covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Robertsville, with the one closest to Robertsville listed first.
- Robertsville Cemetery
(Less than 2 miles to the west)
- Peck Cemetery
(Less than 2 miles to the east)
- Galbraith - Jett Cemetery
(Less than 2 miles to the northwest)
- Gamble Cemetery
(Less than 2 miles to the southeast)
- Batley Cemetery
(Less than 2 miles to the northwest)
- Hendricks Cemetery
(Less than 2 miles to the northeast)
- Smith Cemetery
(Less than 2 miles to the northeast)
- Jump to our Gazetteer entry for the Smith Cemetery
- Note: The GPS coordinates that we are using for the Smith Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Sweet Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Sweet Cemetery
- Note: The GPS coordinates that we are using for the Sweet Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Key Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Key Cemetery
- Note: The GPS coordinates that we are using for the Key Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Smith Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Smith Cemetery
- Note: The GPS coordinates that we are using for the Smith Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Smith Cemetery
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for the Smith Cemetery
- Note: The GPS coordinates that we are using for the Smith Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- New Hope Cemetery
(2 miles [3.2 km] to the southeast)
- Continue List (1164 more) ...
- Jackson Cemetery
(2 miles [3.2 km] to the southeast)
- Hendrix (Raby) Cemetery
(2 miles [3.2 km] to the east)
- Brummett Cemetery
(2 miles [3.2 km] to the east)
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
The Rand McNally Atlas shows that Robertsville had a population of 25 people in 1895 with a post office and no railroad service.
These communities are listed based on their distance from Robertsville, with the one closest to Robertsville listed first.
- Fairview ‑ Historic
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Anderson County
- Scarboro
(3 miles [4.8 km] to the southeast)
- Marlow
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Marlow have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marlow
- Marlow is located in Anderson County
- Oliver Springs
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Oliver Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oliver Springs
- Oliver Springs is located in Anderson County
- Population from the 2020 Census: 3,439 people
- Jump to TripAdvisor's Tourism page for Oliver Springs <2>
- Ethel ‑ Historic
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Ethel have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ethel
- Ethel is located in Roane County
- Estimated population in 2014: 2,049 people
- Leedom ‑ Historic
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Leedom have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leedom
- Leedom is located in Anderson County
- Dossett
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Dossett have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dossett
- Dossett is located in Anderson County
- Bear ‑ Historic
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Bear have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bear
- Bear is located in Roane County
- Windrock
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Windrock have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Windrock
- Windrock is located in Anderson County
- Frost
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Frost have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Frost
- Frost is located in Anderson County
- Clinch River ‑ Historic
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Clinch River have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clinch River
- Clinch River is located in Anderson County
- Scandlyn
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Scandlyn have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scandlyn
- Scandlyn is located in Roane County
- Continue List (20 more) ...
- Wheat ‑ Historic
(7 miles [11.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Wheat. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Wheat
- Wheat is located in Roane County
- Google driving directions:
- From your current location to Wheat
- From Robertsville to Wheat
- Bud ‑ Historic
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Bud have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bud
- Bud is located in Anderson County
- Laurel
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Laurel have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laurel
- Laurel is located in Anderson County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Robertsville. See our List of 1890's Communities around Robertsville.
Newspapers Published in Robertsville ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 30 newspapers that have been published in the area around Robertsville.
Although we're unaware of any newspapers that were published in the immediate area of Robertsville, there are papers which were published within 10 miles [16.1 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Robertsville.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Robertsville:
- Websites specific to Tennessee
- Pages specific to Anderson County
- Genealogy information for nearby counties
- Blount County
- Campbell County
- Cumberland County
- Knox County
- Loudon County
- Monroe County
- Morgan County
- Roane County
- Scott County
- Sevier County
- Union County
- Cemetery Information and Directories for Tennessee
Off-the-Road Links ...
Unfortunately, we don't know of a website for Robertsville. If you can help, please contact us through our Feedback Page.
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Robertsville, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Robertsville) to Point B.Our distance measurements begin at a specific point in Robertsville. The point we use is located at these GPS coordinates - Latitude: 36.0139, Longitude: -84.2730 In this case, the coordinates for Robertsville have been provided by the Geographic Names Information System (GNIS). |