Our Genealogy Helper
Introduction ...
So far, we found very little information about Marchbanks. The little that we've found leads us believe that the community is historic.<1>
We've added Marchbanks to our Gazetteer with the hope that we can develop more information. If you can help us with Marchbanks, please Contact Us.
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Marchbanks (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Marchbanks. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Although our information shows that the community of Marchbanks is historic, it would have been located within present day Putnam County.
To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Putnam County: Cumberland, DeKalb, Fentress, Jackson, Overton, Smith & White.
Below are the counties that are near Marchbanks. For each of these counties, we show a sample of those communities that are closest to Marchbanks:
- Putnam County (The home county of Marchbanks)
- The following are listed by their distance from Marchbanks, with the one closest to Marchbanks listed first.
- Jeremiah
(Less than 2 miles to the northeast)
- Jump to our Gazetteer entry for Jeremiah
- Jeremiah is located in Putnam County
- Algood
(Less than 2 miles to the southwest)
- Note: The GPS coordinates that we are using for Algood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Algood
- Algood is located in Putnam County
- Population from the 2020 Census: 4,547 people
- Jump to TripAdvisor's Tourism page for Algood <3>
- Shennon Village
(2 miles [3.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Shennon Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shennon Village
- Shennon Village is located in Putnam County
- Bangham Village
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Bangham Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bangham Village
- Bangham Village is located in Putnam County
- Estimated population in 2014: 504 people
- White Plains
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for White Plains have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Plains
- White Plains is located in Putnam County
- Estimated population in 2014: 2,231 people
- Park Village
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Park Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Park Village
- Park Village is located in Putnam County
- Avoton ‑ Historic
(6 miles [9.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Avoton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Avoton
- Avoton is located in Putnam County
- Cookeville
(6 miles [9.7 km] to the southwest)
- Southtown Village
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Southtown Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Southtown Village
- Southtown Village is located in Putnam County
- Burnett
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Burnett have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burnett
- Burnett is located in Putnam County
- Estimated population in 2014: 418 people
- Monterey
(9 miles [14.5 km] to the southeast)
- Burgess
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Burgess
- Burgess is located in Putnam County
- Clay County
- The following are listed by their distance from Marchbanks, with the one closest to Marchbanks listed first.
- Butlers Landing ‑ Historic
(20 miles [32.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Butlers Landing. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Butlers Landing
- Butlers Landing is located in Clay County
- Cave Springs
(23 miles [37 km] to the north)
- Jump to our Gazetteer entry for Cave Springs
- Cave Springs is located in Clay County
- Celina
(23 miles [37 km] to the north)
- Free Hill
(24 miles [38.6 km] to the north)
- Jump to our Gazetteer entry for Free Hill
- Free Hill is located in Clay County
- Thompsons Store
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Thompsons Store have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thompsons Store
- Thompsons Store is located in Clay County
- Estimated population in 2014: 3,180 people
- Moss
(28 miles [45.1 km] to the northwest)
- Jump to our Gazetteer entry for Moss
- Moss is located in Clay County
- Jenkins Village
(30 miles [48.3 km] to the northwest)
- Jump to our Gazetteer entry for Jenkins Village
- Jenkins Village is located in Clay County
- Cumberland County
- The following are listed by their distance from Marchbanks, with the one closest to Marchbanks listed first.
- Pleasant Hill
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Pleasant Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Hill
- Pleasant Hill is located in Cumberland County
- Population from the 2020 Census: 558 people
- Woody
(22 miles [35.4 km] to the southeast)
- Jump to our Gazetteer entry for Woody
- Woody is located in Cumberland County
- Creston
(23 miles [37 km] to the southeast)
- Jump to our Gazetteer entry for Creston
- Creston is located in Cumberland County
- Dykes Crossroads
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Dykes Crossroads have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dykes Crossroads
- Dykes Crossroads is located in Cumberland County
- Estimated population in 2014: 2,281 people
- Todd Town
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Todd Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Todd Town
- Todd Town is located in Cumberland County
- Erasmus
(25 miles [40.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Erasmus. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Erasmus
- Erasmus is located in Cumberland County
- Howard Springs
(25 miles [40.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Howard Springs. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Howard Springs
- Howard Springs is located in Cumberland County
- Crossville
(28 miles [45.1 km] to the southeast)
- Mount Gilead ‑ Historic
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Mount Gilead have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Gilead
- Mount Gilead is located in Cumberland County
- Greenbriar Village
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Greenbriar Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenbriar Village
- Greenbriar Village is located in Cumberland County
- Estimated population in 2014: 1,103 people
- Lantana
(29 miles [46.7 km] to the southeast)
- Jump to our Gazetteer entry for Lantana
- Lantana is located in Cumberland County
- Lake Tansi Village
(30 miles [48.3 km] to the southeast)
- Jump to our Gazetteer entry for Lake Tansi Village
- Lake Tansi Village is located in Cumberland County
- Population from the 2010 Census: 3,803 people
- DeKalb County
- The following are listed by their distance from Marchbanks, with the one closest to Marchbanks listed first.
- Johnsons Chapel
(20 miles [32.2 km] to the southwest)
- Jump to our Gazetteer entry for Johnsons Chapel
- Johnsons Chapel is located in DeKalb County
- Philippi
(25 miles [40.2 km] to the southwest)
- Jump to our Gazetteer entry for Philippi
- Philippi is located in DeKalb County
- Young Bend
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Young Bend have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Young Bend
- Young Bend is located in DeKalb County
- Estimated population in 2014: 279 people
- Smithville
(28 miles [45.1 km] to the southwest)
- Temperance Hall
(28 miles [45.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Temperance Hall. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Temperance Hall
- Temperance Hall is located in DeKalb County
- Population from the 2010 Census: 5,791 people
- Fentress County
- The following are listed by their distance from Marchbanks, with the one closest to Marchbanks listed first.
- Wilder
(18 miles [29 km] to the east)
- Jump to our Gazetteer entry for Wilder
- Wilder is located in Fentress County
- Clarkrange
(22 miles [35.4 km] to the east)
- Cooper
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Cooper have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cooper
- Cooper is located in Fentress County
- Estimated population in 2014: 4,385 people
- Grimsley
(24 miles [38.6 km] to the east)
- Little Crab
(26 miles [41.8 km] to the northeast)
- Jump to our Gazetteer entry for Little Crab
- Little Crab is located in Fentress County
- Cumberland Grove
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Cumberland Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cumberland Grove
- Cumberland Grove is located in Fentress County
- Estimated population in 2014: 489 people
- Jamestown
(30 miles [48.3 km] to the northeast)
- Jackson County
- The following are listed by their distance from Marchbanks, with the one closest to Marchbanks listed first.
- Dodson Branch
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Dodson Branch have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dodson Branch
- Dodson Branch is located in Jackson County
- Population from the 2010 Census: 1,074 people
- Mayfield ‑ Historic
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Mayfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mayfield
- Mayfield is located in Jackson County
- Burristown
(13 miles [20.9 km] to the northwest)
- Jump to our Gazetteer entry for Burristown
- Burristown is located in Jackson County
- Columbus Hill
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Columbus Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Columbus Hill
- Columbus Hill is located in Jackson County
- Estimated population in 2014: 36,071 people
- Gainesboro
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Gainesboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gainesboro
- Gainesboro is located in Jackson County
- Population from the 2020 Census: 951 people
- Jump to TripAdvisor's Tourism page for Gainesboro <3>
- Nameless
(16 miles [25.7 km] to the west)
- Jump to our Gazetteer entry for Nameless
- Nameless is located in Jackson County
- Rough Point
(20 miles [32.2 km] to the northwest)
- Jump to our Gazetteer entry for Rough Point
- Rough Point is located in Jackson County
- Whitleyville
(21 miles [33.8 km] to the northwest)
- Jump to our Gazetteer entry for Whitleyville
- Whitleyville is located in Jackson County
- Haydenburg
(23 miles [37 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Haydenburg. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Haydenburg
- Haydenburg is located in Jackson County
- North Springs
(25 miles [40.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for North Springs. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for North Springs
- North Springs is located in Jackson County
- Macon County
- Gibbs Crossroads
(30 miles [48.3 km] to the northwest)
- Jump to our Gazetteer entry for Gibbs Crossroads
- Gibbs Crossroads is located in Macon County
- Overton County
- The following are listed by their distance from Marchbanks, with the one closest to Marchbanks listed first.
- Duncan's Chapel ‑ Historic
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Duncan's Chapel. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Duncan's Chapel
- Duncan's Chapel is located in Overton County
- Beaver Hill
(7 miles [11.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Beaver Hill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Beaver Hill
- Beaver Hill is located in Overton County
- Bushing ‑ Historic
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Bushing have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bushing
- Bushing is located in Overton County
- Lovejoy
(13 miles [20.9 km] to the east)
- Jump to our Gazetteer entry for Lovejoy
- Lovejoy is located in Overton County
- Livingston
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Livingston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Livingston
- Livingston is located in Overton County
- Population from the 2020 Census: 4,129 people
- Jump to TripAdvisor's Tourism page for Livingston <3>
- Qualls ‑ Historic
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Qualls have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Qualls
- Qualls is located in Overton County
- Hanging Limb
(14 miles [22.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Hanging Limb. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hanging Limb
- Hanging Limb is located in Overton County
- Obey City
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Obey City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Obey City
- Obey City is located in Overton County
- Garretts Mill
(16 miles [25.7 km] to the northeast)
- Jump to our Gazetteer entry for Garretts Mill
- Garretts Mill is located in Overton County
- Grey ‑ Historic
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Grey have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grey
- Grey is located in Overton County
- Poteet ‑ Historic
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Poteet have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Poteet
- Poteet is located in Overton County
- Oak Dale
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Oak Dale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Dale
- Oak Dale is located in Overton County
- Estimated population in 2014: 222 people
- Pickett County
- Byrdstown
(29 miles [46.7 km] to the northeast)
- Smith County
- The following are listed by their distance from Marchbanks, with the one closest to Marchbanks listed first.
- Chestnut Mound
(22 miles [35.4 km] to the west)
- Jump to our Gazetteer entry for Chestnut Mound
- Chestnut Mound is located in Smith County
- Defeated
(28 miles [45.1 km] to the west)
- Jump to our Gazetteer entry for Defeated
- Defeated is located in Smith County
- Difficult
(28 miles [45.1 km] to the west)
- Jump to our Gazetteer entry for Difficult
- Difficult is located in Smith County
- Estimated population in 2014: 14,993 people
- Gordonsville
(28 miles [45.1 km] to the west)
- Carthage
(29 miles [46.7 km] to the west)
- Hickman
(29 miles [46.7 km] to the west)
- Jump to our Gazetteer entry for Hickman
- Hickman is located in Smith County
- Bluff Creek
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Bluff Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bluff Creek
- Bluff Creek is located in Smith County
- Estimated population in 2014: 1,734 people
- South Carthage
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for South Carthage have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Carthage
- South Carthage is located in Smith County
- Population from the 2020 Census: 1,406 people
- Van Buren County
- The following are listed by their distance from Marchbanks, with the one closest to Marchbanks listed first.
- Cummingsville
(27 miles [43.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Cummingsville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Cummingsville
- Cummingsville is located in Van Buren County
- Meade ‑ Historic
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Meade have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meade
- Meade is located in Van Buren County
- Sweetgum
(28 miles [45.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Sweetgum. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Sweetgum
- Sweetgum is located in Van Buren County
- Warren County
- Fall City
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Fall City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fall City
- Fall City is located in Warren County
- White County
- The following are listed by their distance from Marchbanks, with the one closest to Marchbanks listed first.
- Cherry Creek
(13 miles [20.9 km] to the south)
- Jump to our Gazetteer entry for Cherry Creek
- Cherry Creek is located in White County
- Macedonia
(13 miles [20.9 km] to the southwest)
- Jump to our Gazetteer entry for Macedonia
- Macedonia is located in White County
- Ravenscroft
(17 miles [27.4 km] to the southeast)
- Jump to our Gazetteer entry for Ravenscroft
- Ravenscroft is located in White County
- Fanchers Mills
(18 miles [29 km] to the southwest)
- Jump to our Gazetteer entry for Fanchers Mills
- Fanchers Mills is located in White County
- Sparta
(19 miles [30.6 km] to the south)
- Clarktown
(20 miles [32.2 km] to the south)
- Jump to our Gazetteer entry for Clarktown
- Clarktown is located in White County
- Estimated population in 2014: 146,806 people
- Methodist ‑ Historic
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Methodist have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Methodist
- Methodist is located in White County
- Peeled Chestnut
(21 miles [33.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Peeled Chestnut. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Peeled Chestnut
- Peeled Chestnut is located in White County
- Darkey Springs
(23 miles [37 km] to the southwest)
- Jump to our Gazetteer entry for Darkey Springs
- Darkey Springs is located in White County
- Drop ‑ Historic
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Drop have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Drop
- Drop is located in White County
- Doyle
(25 miles [40.2 km] to the south)
- Jump to our Gazetteer entry for Doyle
- Doyle is located in White County
- Population from the 2020 Census: 587 people
- Pollard ‑ Historic
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Pollard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pollard
- Pollard is located in White County
- Monroe County (KY)
- Martinsburg
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Martinsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Martinsburg
- Martinsburg is located in Monroe County (KY)
For an expanded list of the communities that are closest to Marchbanks, see our County-by-County Page for Marchbanks.
Cemeteries Near Marchbanks ...
Below are cemeteries that are in the vicinity of Marchbanks.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Marchbanks covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Marchbanks, with the one closest to Marchbanks listed first.
- Lyles Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Lyles Cemetery
- Note: The GPS coordinates that we are using for the Lyles Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Robinson Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Robinson Cemetery
- Note: The GPS coordinates that we are using for the Robinson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Burton Cemetery
(2 miles [3.2 km] to the southwest)
- Jump to our Gazetteer entry for the Burton Cemetery
- Note: The GPS coordinates that we are using for the Burton Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Quarles Cemetery
(2 miles [3.2 km] to the southwest)
- Jump to our Gazetteer entry for the Quarles Cemetery
- Note: The GPS coordinates that we are using for the Quarles Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Gullet Cemetery
(2 miles [3.2 km] to the southeast)
- Jump to our Gazetteer entry for the Gullet Cemetery
- Note: The GPS coordinates that we are using for the Gullet Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Brotherton Cemetery
(2 miles [3.2 km] to the southeast)
- Jump to our Gazetteer entry for the Brotherton Cemetery
- Note: The GPS coordinates that we are using for the Brotherton Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Paran Cemetery
(2 miles [3.2 km] to the north)
- Jump to our Gazetteer entry for the Paran Cemetery
- Note: The GPS coordinates that we are using for the Paran Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Phillips Cemetery
(2 miles [3.2 km] to the west)
- Jump to our Gazetteer entry for the Phillips Cemetery
- Note: The GPS coordinates that we are using for the Phillips Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Buck Cemetery
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for the Buck Cemetery
- Note: The GPS coordinates that we are using for the Buck Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Rockwell Cemetery
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for the Rockwell Cemetery
- Note: The GPS coordinates that we are using for the Rockwell Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Wiser Cemetery
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for the Wiser Cemetery
- Note: The GPS coordinates that we are using for the Wiser Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Wiser Cemetery
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for the Wiser Cemetery
- Note: The GPS coordinates that we are using for the Wiser Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Continue List (646 more) ...
- Netherland Cemetery
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for the Netherland Cemetery
- Note: The GPS coordinates that we are using for the Netherland Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Norris Cemetery
(3 miles [4.8 km] to the northwest)
- Jump to our Gazetteer entry for the Norris Cemetery
- Note: The GPS coordinates that we are using for the Norris Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Phy Cemetery
(3 miles [4.8 km] to the west)
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.
While we didn't find Marchbanks in the Atlas, the following 1895 communities would have been found near the current location of Marchbanks.
These communities are listed based on their distance from Marchbanks, with the one closest to Marchbanks listed first.
- Jeremiah
(Less than 2 miles to the northeast)
- Jump to our Gazetteer entry for Jeremiah
- Jeremiah is located in Putnam County
- Selby ‑ Historic
(3 miles [4.8 km] to the west)
- Note: The GPS coordinates that we are using for Selby have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Selby
- Selby is located in Putnam County
- Miranda ‑ Historic
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Miranda have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Miranda
- Miranda is located in Overton County
- Oak Hill
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Hill
- Oak Hill is located in Overton County
- Cookeville
(6 miles [9.7 km] to the southwest)
- Waterloo
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Waterloo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waterloo
- Waterloo is located in Overton County
- Dry Valley
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Dry Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dry Valley
- Dry Valley is located in Putnam County
- Goffton
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Goffton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goffton
- Goffton is located in Putnam County
- Beaver Hill
(7 miles [11.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Beaver Hill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Beaver Hill
- Beaver Hill is located in Overton County
- Standingstone
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Standingstone have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Standingstone
- Standingstone is located in Putnam County
- Windle
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Windle have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Windle
- Windle is located in Overton County
- Bushing ‑ Historic
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Bushing have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bushing
- Bushing is located in Overton County
- Continue List (14 more) ...
- Crawford ‑ Historic
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Crawford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crawford
- Crawford is located in Overton County
- Double Springs
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Double Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Double Springs
- Double Springs is located in Putnam County
- Henard ‑ Historic
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Henard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Henard
- Henard is located in Overton County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Marchbanks. See our List of 1890's Communities around Marchbanks.
Newspapers Published in Marchbanks ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 22 newspapers that have been published in the area around Marchbanks.
Although we're unaware of any newspapers that were published in the immediate area of Marchbanks, there are papers which were published within 9 miles [14.5 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Marchbanks.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Marchbanks:
- Websites specific to Tennessee
- Pages specific to Putnam County
- Genealogy information for nearby counties
- Clay County
- Cumberland County
- DeKalb County
- Fentress County
- Jackson County
- Macon County
- Overton County
- Pickett County
- Smith County
- Van Buren County
- Warren County
- White County
- Monroe County
- Cemetery Information and Directories for Tennessee
Off-the-Road Links ...
The official website for Putnam County: www.putnamcountytn.gov/
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Marchbanks, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Marchbanks) to Point B.Our distance measurements begin at a specific point in Marchbanks. The point we use is located at these GPS coordinates - Latitude: 36.2117, Longitude: -85.4166 In this case, the coordinates for Marchbanks have been provided by the Geographic Names Information System (GNIS). |