RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Marshall County >> Holtland >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Holtland (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Holtland. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Holtland is located in Marshall County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Marshall County: Bedford, Giles, Lincoln, Maury, Rutherford & Williamson.

Below are the counties that are near Holtland. For each of these counties, we show a sample of those communities that are closest to Holtland:

  • Marshall County     (The home county of Holtland)
    • The following are listed by their distance from Holtland, with the one closest to Holtland listed first.
    • Holts Corner
      (Less than 2 miles to the northeast)
      • Jump to our Gazetteer entry for Holts Corner
      • Holts Corner is located in Marshall County
    • Chapel Hill
      (4 miles [6.4 km] to the south)
      • Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chapel Hill
      • Chapel Hill is located in Marshall County
      • Population from the 2020 Census: 1,571 people
      • Jump to TripAdvisor's Tourism page for Chapel Hill <2>
    • Caney Spring
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Caney Spring have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Caney Spring
      • Caney Spring is located in Marshall County
    • Verona
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Verona have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Verona
      • Verona is located in Marshall County
    • Berlin
      (13 miles [20.9 km] to the southwest)
      • Jump to our Gazetteer entry for Berlin
      • Berlin is located in Marshall County
    • Oak Hill
      (16 miles [25.7 km] to the south)
      • Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Hill
      • Oak Hill is located in Marshall County
    • Lewisburg
      (17 miles [27.4 km] to the south)
    • Orrs
      (18 miles [29 km] to the south)
      • Note: The GPS coordinates that we are using for Orrs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Orrs
      • Orrs is located in Marshall County
      • Estimated population in 2014: 123 people
    • Cochran
      (19 miles [30.6 km] to the south)
      • Note: The GPS coordinates that we are using for Cochran have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cochran
      • Cochran is located in Marshall County
    • Globe
      (20 miles [32.2 km] to the southwest)
      • Jump to our Gazetteer entry for Globe
      • Globe is located in Marshall County
    • New Town
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Town
      • New Town is located in Marshall County
    • Talley
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Talley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Talley
      • Talley is located in Marshall County
  • Bedford County
    • The following are listed by their distance from Holtland, with the one closest to Holtland listed first.
    • Unionville
      (7 miles [11.3 km] to the southeast)
    • Longview
      (9 miles [14.5 km] to the east)
      • Jump to our Gazetteer entry for Longview
      • Longview is located in Bedford County
    • Palmetto
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for Palmetto have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Palmetto
      • Palmetto is located in Bedford County
      • Estimated population in 2014: 661 people
    • Anchor Mill ‑ Historic
      (13 miles [20.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Anchor Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Anchor Mill
      • Anchor Mill is located in Bedford County
    • Vannatta
      (13 miles [20.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vannatta
      • Vannatta is located in Bedford County
      • Estimated population in 2014: 398 people
    • Whitaker
      (17 miles [27.4 km] to the south)
      • Jump to our Gazetteer entry for Whitaker
      • Whitaker is located in Bedford County
    • Shelbyville
      (19 miles [30.6 km] to the southeast)
    • Bell Buckle
      (20 miles [32.2 km] to the east)
      • Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bell Buckle
      • Bell Buckle is located in Bedford County
      • Population from the 2020 Census: 537 people
      • Jump to TripAdvisor's Tourism page for Bell Buckle <2>
    • Wartrace
      (23 miles [37 km] to the southeast)
    • Haley
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Haley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Haley
      • Haley is located in Bedford County
    • Cortner
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cortner have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cortner
      • Cortner is located in Bedford County
    • Normandy
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Normandy
      • Normandy is located in Bedford County
      • Population from the 2020 Census: 140 people
      • Jump to TripAdvisor's Tourism page for Normandy <2>
  • Cannon County
    • Bradyville
      (29 miles [46.7 km] to the east)
      • Jump to our Gazetteer entry for Bradyville
      • Bradyville is located in Cannon County
  • Coffee County
    • The following are listed by their distance from Holtland, with the one closest to Holtland listed first.
    • Beechgrove
      (25 miles [40.2 km] to the east)
    • Gossburg
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Gossburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gossburg
      • Gossburg is located in Coffee County
  • Davidson County
    • The following are listed by their distance from Holtland, with the one closest to Holtland listed first.
    • Wrencoe
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Wrencoe have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wrencoe
      • Wrencoe is located in Davidson County
    • Whispering Hills
      (25 miles [40.2 km] to the north)
      • Jump to our Gazetteer entry for Whispering Hills
      • Whispering Hills is located in Davidson County
    • Oak Hill
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Hill
      • Oak Hill is located in Davidson County
      • Population from the 2020 Census: 4,432 people
    • Rural Hill
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for Rural Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rural Hill
      • Rural Hill is located in Davidson County
      • Population from the 2010 Census: 2,007 people
    • Forest Hills
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Forest Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Forest Hills
      • Forest Hills is located in Davidson County
      • Population from the 2020 Census: 4,721 people
    • Paragon Mills
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Paragon Mills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Paragon Mills
      • Paragon Mills is located in Davidson County
    • Nashboro Village
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Nashboro Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nashboro Village
      • Nashboro Village is located in Davidson County
    • Priest Lake Park
      (28 miles [45.1 km] to the north)
      • Jump to our Gazetteer entry for Priest Lake Park
      • Priest Lake Park is located in Davidson County
    • Belle Meade
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Belle Meade have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belle Meade
      • Belle Meade is located in Davidson County
      • Population from the 2020 Census: 2,788 people
    • Berry Hill
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Berry Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Berry Hill
      • Berry Hill is located in Davidson County
      • Population from the 2020 Census: 492 people
    • Green Hills
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Green Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Green Hills
      • Green Hills is located in Davidson County
      • Population from the 2010 Census: 6,618 people
    • Linton
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Linton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Linton
      • Linton is located in Davidson County
  • Giles County
    • The following are listed by their distance from Holtland, with the one closest to Holtland listed first.
    • Trigg
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Trigg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Trigg
      • Trigg is located in Giles County
      • Estimated population in 2014: 851 people
    • Lynnville
      (27 miles [43.5 km] to the southwest)
  • Lincoln County
    • The following are listed by their distance from Holtland, with the one closest to Holtland listed first.
    • Petersburg
      (25 miles [40.2 km] to the south)
    • Belleville
      (30 miles [48.3 km] to the south)
      • Jump to our Gazetteer entry for Belleville
      • Belleville is located in Lincoln County
  • Maury County
    • The following are listed by their distance from Holtland, with the one closest to Holtland listed first.
    • New Town
      (13 miles [20.9 km] to the west)
      • Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Town
      • New Town is located in Maury County
    • Philadelphia
      (15 miles [24.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Philadelphia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Philadelphia
      • Philadelphia is located in Maury County
      • Estimated population in 2014: 683 people
    • Jameson
      (18 miles [29 km] to the west)
      • Jump to our Gazetteer entry for Jameson
      • Jameson is located in Maury County
    • Columbia
      (19 miles [30.6 km] to the west)
    • Theta
      (20 miles [32.2 km] to the west)
      • Jump to our Gazetteer entry for Theta
      • Theta is located in Maury County
    • Culleoka
      (21 miles [33.8 km] to the southwest)
    • New Hope
      (21 miles [33.8 km] to the west)
      • Note: The GPS coordinates that we are using for New Hope have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Hope
      • New Hope is located in Maury County
      • Estimated population in 2014: 1,070 people
    • Graymere Manor
      (22 miles [35.4 km] to the west)
      • Note: The GPS coordinates that we are using for Graymere Manor have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Graymere Manor
      • Graymere Manor is located in Maury County
      • Population from the 2010 Census: 1,222 people
    • Santa Fe
      (24 miles [38.6 km] to the west)
    • Hill Town
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Hill Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hill Town
      • Hill Town is located in Maury County
    • Armour Village
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Armour Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Armour Village
      • Armour Village is located in Maury County
    • Ashwood
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Ashwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ashwood
      • Ashwood is located in Maury County
  • Rutherford County
    • The following are listed by their distance from Holtland, with the one closest to Holtland listed first.
    • Eagleville
      (4 miles [6.4 km] to the northeast)
    • Concord
      (8 miles [12.9 km] to the northeast)
    • Patterson
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Patterson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Patterson
      • Patterson is located in Rutherford County
    • Midland
      (12 miles [19.3 km] to the east)
      • Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Midland
      • Midland is located in Rutherford County
    • Snell ‑ Historic
      (13 miles [20.9 km] to the northeast)
      • Note: The GPS coordinates that we are using for Snell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Snell
      • Snell is located in Rutherford County
      • Estimated population in 2014: 1,361 people
    • Rucker
      (17 miles [27.4 km] to the east)
      • Note: The GPS coordinates that we are using for Rucker have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rucker
      • Rucker is located in Rutherford County
    • Plainview
      (19 miles [30.6 km] to the east)
      • Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Plainview
      • Plainview is located in Rutherford County
    • Burns Place
      (20 miles [32.2 km] to the east)
      • Jump to our Gazetteer entry for Burns Place
      • Burns Place is located in Rutherford County
    • Murfreesboro
      (20 miles [32.2 km] to the northeast)
    • Colonial Village
      (21 miles [33.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Colonial Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Colonial Village
      • Colonial Village is located in Rutherford County
    • Smyrna
      (21 miles [33.8 km] to the northeast)
      • Jump to our Gazetteer entry for Smyrna
      • Smyrna is located in Rutherford County
      • Population from the 2020 Census: 53,185 people
      • Jump to TripAdvisor's Tourism page for Smyrna <2>
    • Dillton
      (22 miles [35.4 km] to the east)
      • Jump to our Gazetteer entry for Dillton
      • Dillton is located in Rutherford County
  • Williamson County
    • The following are listed by their distance from Holtland, with the one closest to Holtland listed first.
    • College Grove
      (6 miles [9.7 km] to the north)
    • Duplex
      (8 miles [12.9 km] to the northwest)
      • Jump to our Gazetteer entry for Duplex
      • Duplex is located in Williamson County
    • Peytonsville
      (9 miles [14.5 km] to the northwest)
      • Jump to our Gazetteer entry for Peytonsville
      • Peytonsville is located in Williamson County
    • Arrington
      (12 miles [19.3 km] to the north)
    • Thompson's Station
      (13 miles [20.9 km] to the northwest)
      • Jump to our Gazetteer entry for Thompson's Station
      • Thompson's Station is located in Williamson County
      • Population from the 2020 Census: 6,973 people
      • Former name for Thompson's Station:
      • Littlebury
      • Jump to TripAdvisor's Tourism page for Thompson's Station <2>
    • Spring Hill
      (13 miles [20.9 km] to the west)
    • Wilkes ‑ Historic
      (14 miles [22.5 km] to the northwest)
      • Jump to our Gazetteer entry for Wilkes
      • Wilkes is located in Williamson County
    • Parry
      (16 miles [25.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Parry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Parry
      • Parry is located in Williamson County
      • Estimated population in 2014: 262 people
    • Nolensville
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for Nolensville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nolensville
      • Nolensville is located in Williamson County
      • Population from the 2020 Census: 11,145 people
      • Jump to TripAdvisor's Tourism page for Nolensville <2>
    • Burwood
      (18 miles [29 km] to the northwest)
      • Jump to our Gazetteer entry for Burwood
      • Burwood is located in Williamson County
    • Franklin
      (18 miles [29 km] to the northwest)
    • Southall
      (18 miles [29 km] to the northwest)
      • Jump to our Gazetteer entry for Southall
      • Southall is located in Williamson County
  • Wilson County
    • Rural Hill
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Rural Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rural Hill
      • Rural Hill is located in Wilson County

For an expanded list of the communities that are closest to Holtland, see our County-by-County Page for Holtland.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Holtland:

Cemeteries Near Holtland ...

Below are cemeteries that are in the vicinity of Holtland.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Holtland covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Holtland, with the one closest to Holtland listed first.

  • Eady Cemetery
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for the Eady Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Eady Cemetery
  • Brittain Cemetery
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for the Brittain Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Brittain Cemetery
  • Ezell Cemetery
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for the Ezell Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Ezell Cemetery
  • Smith Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Smith Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Smith Cemetery
  • Sheffield Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the Sheffield Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Sheffield Cemetery
  • Beasley Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the Beasley Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Beasley Cemetery
  • Hughes Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Hughes Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hughes Cemetery
  • Henderson Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Henderson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Henderson Cemetery
  • Riggs Crossroads Cemetery
    (Less than 2 miles to the north)
  • Adams Cemetery
    (Less than 2 miles to the west)
  • Gentry Cemetery
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Gentry Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Gentry Cemetery
  • McCord Cemetery
    (2 miles [3.2 km] to the south)
    • Note: The GPS coordinates that we are using for the McCord Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the McCord Cemetery
  • Continue List   (1999 more) ...
    • Bigger Cemetery
      (2 miles [3.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for the Bigger Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Bigger Cemetery
    • Lee Cemetery
      (2 miles [3.2 km] to the east)
      • Note: The GPS coordinates that we are using for the Lee Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Lee Cemetery
    • McCord Cemetery
      (2 miles [3.2 km] to the east)
      • Note: The GPS coordinates that we are using for the McCord Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the McCord Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

While we didn't find Holtland in the Atlas, the following 1895 communities would have been found near the current location of Holtland.

These communities are listed based on their distance from Holtland, with the one closest to Holtland listed first.

  • Holts Corner
    (Less than 2 miles to the northeast)
    • Jump to our Gazetteer entry for Holts Corner
    • Holts Corner is located in Marshall County
  • Beasley
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for Beasley have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Beasley
    • Beasley is located in Marshall County
  • Thick
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Thick have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Thick
    • Thick is located in Marshall County
  • Chapel Hill
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chapel Hill
    • Chapel Hill is located in Marshall County
    • Population from the 2020 Census: 1,571 people
    • Jump to TripAdvisor's Tourism page for Chapel Hill <2>
  • Eagleville
    (4 miles [6.4 km] to the northeast)
  • Allisona
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Allisona have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Allisona
    • Allisona is located in Rutherford County
  • Rover
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Rover have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rover
    • Rover is located in Bedford County
  • Caney Spring
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Caney Spring have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Caney Spring
    • Caney Spring is located in Marshall County
  • College Grove
    (6 miles [9.7 km] to the north)
  • Rally Hill
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Rally Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rally Hill
    • Rally Hill is located in Maury County
  • Unionville
    (7 miles [11.3 km] to the southeast)
  • Bethesda
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Bethesda have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bethesda
    • Bethesda is located in Williamson County
  • Continue List   (17 more) ...
    • Lillard Mill
      (8 miles [12.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lillard Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lillard Mill
      • Lillard Mill is located in Marshall County
    • Rich Creek
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Rich Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rich Creek
      • Rich Creek is located in Marshall County
    • Arno
      (8 miles [12.9 km] to the north)
      • Note: The GPS coordinates that we are using for Arno have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Arno
      • Arno is located in Williamson County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Holtland. See our List of 1890's Communities around Holtland.

Unfortunately, we don't know of a website for Holtland. If you can help, please contact us through our Feedback Page.

The official website for Marshall County: www.marshallcountytn.com/

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Holtland, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024