Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Hillwood Acres (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Hillwood Acres. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Hillwood Acres is located in Williamson County.
To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Williamson County: Cheatham, Davidson, Dickson, Hickman, Marshall, Maury & Rutherford.
Below are the counties that are near Hillwood Acres. For each of these counties, we show a sample of those communities that are closest to Hillwood Acres:
- Williamson County (The home county of Hillwood Acres)
- The following are listed by their distance from Hillwood Acres, with the one closest to Hillwood Acres listed first.
- Arrington
(Less than 2 miles to the east)
- Clovercroft
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Clovercroft. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Clovercroft
- Clovercroft is located in Williamson County
- Peytonsville
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for Peytonsville
- Peytonsville is located in Williamson County
- Nolensville
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Nolensville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Nolensville
- Nolensville is located in Williamson County
- Population from the 2020 Census: 11,145 people
- Jump to TripAdvisor's Tourism page for Nolensville <1>
- College Grove
(6 miles [9.7 km] to the southeast)
- Brentwood
(8 miles [12.9 km] to the north)
- Franklin
(8 miles [12.9 km] to the northwest)
- McEwen ‑ Historic
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for McEwen have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McEwen
- McEwen is located in Williamson County
- Estimated population in 2014: 1,699 people
- Harpeth
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Harpeth. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Harpeth
- Harpeth is located in Williamson County
- Parry
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Parry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parry
- Parry is located in Williamson County
- Estimated population in 2014: 262 people
- Lynnwood Downs
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Lynnwood Downs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynnwood Downs
- Lynnwood Downs is located in Williamson County
- Estimated population in 2014: 282 people
- Duplex
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Duplex
- Duplex is located in Williamson County
- Berrys Chapel Heights
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Berrys Chapel Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Berrys Chapel Heights
- Berrys Chapel Heights is located in Williamson County
- Estimated population in 2014: 551 people
- Bedford County
- The following are listed by their distance from Hillwood Acres, with the one closest to Hillwood Acres listed first.
- Unionville
(18 miles [29 km] to the southeast)
- Longview
(19 miles [30.6 km] to the southeast)
- Jump to our Gazetteer entry for Longview
- Longview is located in Bedford County
- Vannatta
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vannatta
- Vannatta is located in Bedford County
- Estimated population in 2014: 398 people
- Anchor Mill ‑ Historic
(25 miles [40.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Anchor Mill. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Anchor Mill
- Anchor Mill is located in Bedford County
- Palmetto
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Palmetto have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Palmetto
- Palmetto is located in Bedford County
- Estimated population in 2014: 661 people
- Bell Buckle
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Buckle
- Bell Buckle is located in Bedford County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Bell Buckle <1>
- Whitaker
(29 miles [46.7 km] to the south)
- Jump to our Gazetteer entry for Whitaker
- Whitaker is located in Bedford County
- Shelbyville
(30 miles [48.3 km] to the southeast)
- Cheatham County
- The following are listed by their distance from Hillwood Acres, with the one closest to Hillwood Acres listed first.
- Pegram
(24 miles [38.6 km] to the northwest)
- Jump to our Gazetteer entry for Pegram
- Pegram is located in Cheatham County
- Population from the 2020 Census: 2,056 people
- Kingston Springs
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Kingston Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingston Springs
- Kingston Springs is located in Cheatham County
- Population from the 2020 Census: 2,714 people
- Jump to TripAdvisor's Tourism page for Kingston Springs <1>
- Doziers ‑ Historic
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Doziers have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Doziers
- Doziers is located in Cheatham County
- Estimated population in 2014: 543 people
- Bell Town
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Bell Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Town
- Bell Town is located in Cheatham County
- Marrowbone
(29 miles [46.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Marrowbone. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Marrowbone
- Marrowbone is located in Cheatham County
- Lillamay
(30 miles [48.3 km] to the northwest)
- Jump to our Gazetteer entry for Lillamay
- Lillamay is located in Cheatham County
- Davidson County
- The following are listed by their distance from Hillwood Acres, with the one closest to Hillwood Acres listed first.
- Wrencoe
(9 miles [14.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Wrencoe. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Wrencoe
- Wrencoe is located in Davidson County
- Whispering Hills
(13 miles [20.9 km] to the north)
- Jump to our Gazetteer entry for Whispering Hills
- Whispering Hills is located in Davidson County
- Oak Hill
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Hill
- Oak Hill is located in Davidson County
- Population from the 2020 Census: 4,432 people
- Paragon Mills
(14 miles [22.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Paragon Mills. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Paragon Mills
- Paragon Mills is located in Davidson County
- Rural Hill
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Rural Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rural Hill
- Rural Hill is located in Davidson County
- Population from the 2010 Census: 2,007 people
- Forest Hills
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Forest Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forest Hills
- Forest Hills is located in Davidson County
- Population from the 2020 Census: 4,721 people
- Green Hills
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Green Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Green Hills
- Green Hills is located in Davidson County
- Population from the 2010 Census: 6,618 people
- Nashboro Village
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Nashboro Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nashboro Village
- Nashboro Village is located in Davidson County
- Priest Lake Park
(16 miles [25.7 km] to the north)
- Jump to our Gazetteer entry for Priest Lake Park
- Priest Lake Park is located in Davidson County
- Berry Hill
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Berry Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Berry Hill
- Berry Hill is located in Davidson County
- Population from the 2020 Census: 492 people
- Dog Town ‑ Historic
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Dog Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dog Town
- Dog Town is located in Davidson County
- Belle Meade
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Belle Meade have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belle Meade
- Belle Meade is located in Davidson County
- Population from the 2020 Census: 2,788 people
- Bellevue
(18 miles [29 km] to the northwest)
- Dickson County
- The following are listed by their distance from Hillwood Acres, with the one closest to Hillwood Acres listed first.
- White Bluff
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for White Bluff have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Bluff
- White Bluff is located in Dickson County
- Population from the 2020 Census: 3,689 people
- Jump to TripAdvisor's Tourism page for White Bluff <1>
- Spencers Mill
(29 miles [46.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Spencers Mill. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Spencers Mill
- Spencers Mill is located in Dickson County
- Hickman County
- Primm Springs
(29 miles [46.7 km] to the west)
- Jump to our Gazetteer entry for Primm Springs
- Primm Springs is located in Hickman County
- Marshall County
- The following are listed by their distance from Hillwood Acres, with the one closest to Hillwood Acres listed first.
- Holts Corner
(12 miles [19.3 km] to the south)
- Jump to our Gazetteer entry for Holts Corner
- Holts Corner is located in Marshall County
- Chapel Hill
(17 miles [27.4 km] to the south)
- Caney Spring
(18 miles [29 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Caney Spring. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Caney Spring
- Caney Spring is located in Marshall County
- Verona
(23 miles [37 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Verona. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Verona
- Verona is located in Marshall County
- Berlin
(24 miles [38.6 km] to the south)
- Jump to our Gazetteer entry for Berlin
- Berlin is located in Marshall County
- South Berlin
(26 miles [41.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for South Berlin. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for South Berlin
- South Berlin is located in Marshall County
- Oak Hill
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Hill
- Oak Hill is located in Marshall County
- Lewisburg
(29 miles [46.7 km] to the south)
- Maury County
- The following are listed by their distance from Hillwood Acres, with the one closest to Hillwood Acres listed first.
- New Town
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Town
- New Town is located in Maury County
- Jameson
(17 miles [27.4 km] to the southwest)
- Jump to our Gazetteer entry for Jameson
- Jameson is located in Maury County
- Carters Creek
(18 miles [29 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Carters Creek. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Carters Creek
- Carters Creek is located in Maury County
- Theta
(18 miles [29 km] to the west)
- Jump to our Gazetteer entry for Theta
- Theta is located in Maury County
- New Hope
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for New Hope have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Hope
- New Hope is located in Maury County
- Estimated population in 2014: 1,070 people
- Leftwich
(22 miles [35.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Leftwich. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Leftwich
- Leftwich is located in Maury County
- Mowd ‑ Historic
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Mowd have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mowd
- Mowd is located in Maury County
- Columbia
(24 miles [38.6 km] to the southwest)
- Philadelphia
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Philadelphia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Philadelphia
- Philadelphia is located in Maury County
- Estimated population in 2014: 683 people
- Santa Fe
(24 miles [38.6 km] to the southwest)
- Fly
(24 miles [38.6 km] to the west)
- Jump to our Gazetteer entry for Fly
- Fly is located in Maury County
- Hill Town
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Hill Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hill Town
- Hill Town is located in Maury County
- New Flys Village
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for New Flys Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Flys Village
- New Flys Village is located in Maury County
- Rutherford County
- The following are listed by their distance from Hillwood Acres, with the one closest to Hillwood Acres listed first.
- Patterson
(7 miles [11.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Patterson. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Patterson
- Patterson is located in Rutherford County
- Allisona
(8 miles [12.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Allisona. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Allisona
- Allisona is located in Rutherford County
- Snell ‑ Historic
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Snell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Snell
- Snell is located in Rutherford County
- Estimated population in 2014: 1,361 people
- Eagleville
(10 miles [16.1 km] to the southeast)
- Jefferson Pike
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Jefferson Pike have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jefferson Pike
- Jefferson Pike is located in Rutherford County
- Estimated population in 2014: 8,370 people
- La Vergne
(13 miles [20.9 km] to the northeast)
- Smyrna
(13 miles [20.9 km] to the northeast)
- Concord
(13 miles [20.9 km] to the southeast)
- Morrow
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Morrow have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morrow
- Morrow is located in Rutherford County
- Estimated population in 2014: 29,304 people
- Colonial Village
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Colonial Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colonial Village
- Colonial Village is located in Rutherford County
- Jamestown
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Jamestown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jamestown
- Jamestown is located in Rutherford County
- Estimated population in 2014: 1,940 people
- Murfreesboro
(18 miles [29 km] to the east)
- Murphree
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Murphree have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Murphree
- Murphree is located in Rutherford County
- Estimated population in 2014: 120,954 people
- Sumner County
- The following are listed by their distance from Hillwood Acres, with the one closest to Hillwood Acres listed first.
- Driftwood Park
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Driftwood Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Driftwood Park
- Driftwood Park is located in Sumner County
- Estimated population in 2014: 2,908 people
- Hendersonville
(30 miles [48.3 km] to the north)
- Wilson County
- The following are listed by their distance from Hillwood Acres, with the one closest to Hillwood Acres listed first.
- Rural Hill
(19 miles [30.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Rural Hill. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Rural Hill
- Rural Hill is located in Wilson County
- Gladeville
(23 miles [37 km] to the northeast)
- Lynn Christie
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Lynn Christie have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynn Christie
- Lynn Christie is located in Wilson County
- Estimated population in 2011: 6,411 people
- Belinda City
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Belinda City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belinda City
- Belinda City is located in Wilson County
- Mount Juliet
(25 miles [40.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Mount Juliet. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Mount Juliet
- Mount Juliet is located in Wilson County
- Population from the 2020 Census: 38,526 people
- Jump to TripAdvisor's Tourism page for Mount Juliet <1>
- Cainsville
(27 miles [43.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Cainsville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Cainsville
- Cainsville is located in Wilson County
- Beckwith
(27 miles [43.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Beckwith. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Beckwith
- Beckwith is located in Wilson County
- Leeville
(27 miles [43.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Leeville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Leeville
- Leeville is located in Wilson County
For an expanded list of the communities that are closest to Hillwood Acres, see our County-by-County Page for Hillwood Acres.
Cemeteries Near Hillwood Acres ...
Below are cemeteries that are in the vicinity of Hillwood Acres.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Hillwood Acres covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Hillwood Acres, with the one closest to Hillwood Acres listed first.
- Childress Cemetery
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for the Childress Cemetery
- Note: The GPS coordinates that we are using for the Childress Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Hunter Cemetery
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for the Hunter Cemetery
- Note: The GPS coordinates that we are using for the Hunter Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Street Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Street Cemetery
- Note: The GPS coordinates that we are using for the Street Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Tulloss Cemetery
(Less than 2 miles to the northwest)
- Jump to our Gazetteer entry for the Tulloss Cemetery
- Note: The GPS coordinates that we are using for the Tulloss Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Rivers Cemetery
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for the Rivers Cemetery
- Note: The GPS coordinates that we are using for the Rivers Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Ladd Cemetery
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for the Ladd Cemetery
- Note: The GPS coordinates that we are using for the Ladd Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Beal Cemetery
(2 miles [3.2 km] to the southwest)
- Jump to our Gazetteer entry for the Beal Cemetery
- Note: The GPS coordinates that we are using for the Beal Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Ladd Cemetery
(2 miles [3.2 km] to the west)
- Jump to our Gazetteer entry for the Ladd Cemetery
- Note: The GPS coordinates that we are using for the Ladd Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Gosey Cemetery
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for the Gosey Cemetery
- Note: The GPS coordinates that we are using for the Gosey Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Johnson Cemetery
(3 miles [4.8 km] to the southwest)
- Jump to our Gazetteer entry for the Johnson Cemetery
- Note: The GPS coordinates that we are using for the Johnson Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Gentry Cemetery
(3 miles [4.8 km] to the southwest)
- Jump to our Gazetteer entry for the Gentry Cemetery
- Note: The GPS coordinates that we are using for the Gentry Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Crafton Cemetery
(3 miles [4.8 km] to the southwest)
- Jump to our Gazetteer entry for the Crafton Cemetery
- Note: The GPS coordinates that we are using for the Crafton Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Continue List (1680 more) ...
- Andrews Cemetery
(3 miles [4.8 km] to the southwest)
- Jump to our Gazetteer entry for the Andrews Cemetery
- Note: The GPS coordinates that we are using for the Andrews Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Meek Cemetery
(3 miles [4.8 km] to the southwest)
- Jump to our Gazetteer entry for the Meek Cemetery
- Note: The GPS coordinates that we are using for the Meek Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Triune Cemetery
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for the Triune Cemetery
- Note: The GPS coordinates that we are using for the Triune Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>
While we didn't find Hillwood Acres in the Atlas, the following 1895 communities would have been found near the current location of Hillwood Acres.
These communities are listed based on their distance from Hillwood Acres, with the one closest to Hillwood Acres listed first.
- Arrington
(Less than 2 miles to the east)
- Peytonsville
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for Peytonsville
- Peytonsville is located in Williamson County
- Arno
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Arno have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arno
- Arno is located in Williamson County
- Triune
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Triune have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Triune
- Triune is located in Williamson County
- Clovercroft
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Clovercroft. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Clovercroft
- Clovercroft is located in Williamson County
- College Grove
(6 miles [9.7 km] to the southeast)
- Nolensville
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Nolensville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Nolensville
- Nolensville is located in Williamson County
- Population from the 2020 Census: 11,145 people
- Jump to TripAdvisor's Tourism page for Nolensville <1>
- Carpenters ‑ Historic
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Carpenters have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carpenters
- Carpenters is located in Williamson County
- Patterson
(7 miles [11.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Patterson. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Patterson
- Patterson is located in Rutherford County
- Harpeth
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Harpeth. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Harpeth
- Harpeth is located in Williamson County
- Bethesda
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Bethesda have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethesda
- Bethesda is located in Williamson County
- Allisona
(8 miles [12.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Allisona. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Allisona
- Allisona is located in Rutherford County
- Continue List (13 more) ...
- Brentwood
(8 miles [12.9 km] to the north)
- Almaville
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Almaville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Almaville
- Almaville is located in Rutherford County
- Rocky Fork
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Rocky Fork have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rocky Fork
- Rocky Fork is located in Rutherford County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Hillwood Acres. See our List of 1890's Communities around Hillwood Acres.
Newspapers Published in Hillwood Acres ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 33 newspapers that have been published in the area around Hillwood Acres.
Although we're unaware of any newspapers that were published in the immediate area of Hillwood Acres, there are papers which were published within 8 miles [12.9 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Hillwood Acres.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Hillwood Acres:
- Websites specific to Tennessee
- Pages specific to Williamson County
- Genealogy information for nearby counties
- Bedford County
- Cheatham County
- Davidson County
- Dickson County
- Hickman County
- Marshall County
- Maury County
- Rutherford County
- Sumner County
- Wilson County
- Cemetery Information and Directories for Tennessee
Off-the-Road Links ...
Unfortunately, we don't know of a website for Hillwood Acres. If you can help, please contact us through our Feedback Page.
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Hillwood Acres, please let us know so that we can improve our accuracy. |
<5> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Hillwood Acres) to Point B.Our distance measurements begin at a specific point in Hillwood Acres. The point we use is located at these GPS coordinates - Latitude: 35.8737, Longitude: -86.7264 In this case, the coordinates for Hillwood Acres have been provided by the Geographic Names Information System (GNIS). |