RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Rutherford County >> Haynes >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Haynes (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Haynes. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Haynes is located in Rutherford County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Rutherford County: Bedford, Cannon, Coffee, Davidson, Marshall, Williamson & Wilson.

Below are the counties that are near Haynes. For each of these counties, we show a sample of those communities that are closest to Haynes:

  • Rutherford County     (The home county of Haynes)
    • The following are listed by their distance from Haynes, with the one closest to Haynes listed first.
    • Smyrna
      (4 miles [6.4 km] to the east)
      • Jump to our Gazetteer entry for Smyrna
      • Smyrna is located in Rutherford County
      • Population from the 2020 Census: 53,185 people
      • Jump to TripAdvisor's Tourism page for Smyrna <1>
    • La Vergne
      (4 miles [6.4 km] to the north)
    • Jefferson Pike
      (4 miles [6.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Jefferson Pike have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jefferson Pike
      • Jefferson Pike is located in Rutherford County
      • Estimated population in 2014: 8,370 people
    • Morrow
      (5 miles [8 km] to the north)
      • Note: The GPS coordinates that we are using for Morrow have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morrow
      • Morrow is located in Rutherford County
      • Estimated population in 2014: 29,304 people
    • Colonial Village
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for Colonial Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Colonial Village
      • Colonial Village is located in Rutherford County
    • Snell ‑ Historic
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Snell have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Snell
      • Snell is located in Rutherford County
      • Estimated population in 2014: 1,361 people
    • Jamestown
      (9 miles [14.5 km] to the east)
      • Note: The GPS coordinates that we are using for Jamestown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jamestown
      • Jamestown is located in Rutherford County
      • Estimated population in 2014: 1,940 people
    • Murphree
      (9 miles [14.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Murphree have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Murphree
      • Murphree is located in Rutherford County
      • Estimated population in 2014: 120,954 people
    • Patterson
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Patterson have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Patterson
      • Patterson is located in Rutherford County
    • Walter Hill Estates
      (12 miles [19.3 km] to the east)
      • Note: The GPS coordinates that we are using for Walter Hill Estates have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walter Hill Estates
      • Walter Hill Estates is located in Rutherford County
      • Population from the 2010 Census: 401 people
    • Walterhill
      (12 miles [19.3 km] to the east)
      • Note: The GPS coordinates that we are using for Walterhill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walterhill
      • Walterhill is located in Rutherford County
    • Murfreesboro
      (13 miles [20.9 km] to the southeast)
    • Fairfield Estates
      (14 miles [22.5 km] to the east)
      • Note: The GPS coordinates that we are using for Fairfield Estates have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairfield Estates
      • Fairfield Estates is located in Rutherford County
      • Population from the 2010 Census: 131 people
  • Bedford County
    • The following are listed by their distance from Haynes, with the one closest to Haynes listed first.
    • Longview
      (22 miles [35.4 km] to the south)
      • Jump to our Gazetteer entry for Longview
      • Longview is located in Bedford County
    • Unionville
      (23 miles [37 km] to the south)
    • Vannatta
      (24 miles [38.6 km] to the south)
      • Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vannatta
      • Vannatta is located in Bedford County
      • Estimated population in 2014: 398 people
    • Anchor Mill ‑ Historic
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Anchor Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Anchor Mill
      • Anchor Mill is located in Bedford County
    • Bell Buckle
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bell Buckle
      • Bell Buckle is located in Bedford County
      • Population from the 2020 Census: 537 people
      • Jump to TripAdvisor's Tourism page for Bell Buckle <1>
  • Cannon County
    • The following are listed by their distance from Haynes, with the one closest to Haynes listed first.
    • Auburntown
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Auburntown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Auburntown
      • Auburntown is located in Cannon County
      • Population from the 2020 Census: 266 people
    • Bradyville
      (28 miles [45.1 km] to the southeast)
      • Jump to our Gazetteer entry for Bradyville
      • Bradyville is located in Cannon County
    • Burt
      (29 miles [46.7 km] to the southeast)
      • Jump to our Gazetteer entry for Burt
      • Burt is located in Cannon County
    • Woodbury
      (30 miles [48.3 km] to the east)
  • Cheatham County
    • The following are listed by their distance from Haynes, with the one closest to Haynes listed first.
    • Doziers ‑ Historic
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Doziers have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Doziers
      • Doziers is located in Cheatham County
      • Estimated population in 2014: 543 people
    • Pegram
      (27 miles [43.5 km] to the west)
      • Jump to our Gazetteer entry for Pegram
      • Pegram is located in Cheatham County
      • Population from the 2020 Census: 2,056 people
    • Marrowbone
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Marrowbone have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Marrowbone
      • Marrowbone is located in Cheatham County
    • Kingston Springs
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Kingston Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kingston Springs
      • Kingston Springs is located in Cheatham County
      • Population from the 2020 Census: 2,714 people
      • Jump to TripAdvisor's Tourism page for Kingston Springs <1>
  • Coffee County
    • The following are listed by their distance from Haynes, with the one closest to Haynes listed first.
    • Gossburg
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Gossburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gossburg
      • Gossburg is located in Coffee County
    • Beechgrove
      (30 miles [48.3 km] to the southeast)
  • Davidson County
    • The following are listed by their distance from Haynes, with the one closest to Haynes listed first.
    • Wrencoe
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Wrencoe have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wrencoe
      • Wrencoe is located in Davidson County
    • Rural Hill
      (7 miles [11.3 km] to the north)
      • Note: The GPS coordinates that we are using for Rural Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rural Hill
      • Rural Hill is located in Davidson County
      • Population from the 2010 Census: 2,007 people
    • Nashboro Village
      (9 miles [14.5 km] to the north)
      • Note: The GPS coordinates that we are using for Nashboro Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nashboro Village
      • Nashboro Village is located in Davidson County
    • Priest Lake Park
      (9 miles [14.5 km] to the north)
      • Jump to our Gazetteer entry for Priest Lake Park
      • Priest Lake Park is located in Davidson County
    • Whispering Hills
      (10 miles [16.1 km] to the northwest)
      • Jump to our Gazetteer entry for Whispering Hills
      • Whispering Hills is located in Davidson County
    • Paragon Mills
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Paragon Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Paragon Mills
      • Paragon Mills is located in Davidson County
    • Oak Hill
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Hill
      • Oak Hill is located in Davidson County
      • Population from the 2020 Census: 4,432 people
    • Dog Town ‑ Historic
      (13 miles [20.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Dog Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dog Town
      • Dog Town is located in Davidson County
    • Donelson
      (14 miles [22.5 km] to the north)
      • Jump to our Gazetteer entry for Donelson
      • Donelson is located in Davidson County
    • Mudtavern
      (14 miles [22.5 km] to the north)
      • Jump to our Gazetteer entry for Mudtavern
      • Mudtavern is located in Davidson County
    • Berry Hill
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Berry Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Berry Hill
      • Berry Hill is located in Davidson County
      • Population from the 2020 Census: 492 people
    • Forest Hills
      (15 miles [24.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Forest Hills have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Forest Hills
      • Forest Hills is located in Davidson County
      • Population from the 2020 Census: 4,721 people
    • Green Hills
      (15 miles [24.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Green Hills have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Green Hills
      • Green Hills is located in Davidson County
      • Population from the 2010 Census: 6,618 people
  • Marshall County
    • The following are listed by their distance from Haynes, with the one closest to Haynes listed first.
    • Holts Corner
      (19 miles [30.6 km] to the south)
      • Jump to our Gazetteer entry for Holts Corner
      • Holts Corner is located in Marshall County
    • Chapel Hill
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chapel Hill
      • Chapel Hill is located in Marshall County
      • Population from the 2020 Census: 1,571 people
      • Jump to TripAdvisor's Tourism page for Chapel Hill <1>
    • Caney Spring
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Caney Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Caney Spring
      • Caney Spring is located in Marshall County
  • Maury County
    • The following are listed by their distance from Haynes, with the one closest to Haynes listed first.
    • New Town
      (22 miles [35.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Town
      • New Town is located in Maury County
    • Jameson
      (27 miles [43.5 km] to the southwest)
      • Jump to our Gazetteer entry for Jameson
      • Jameson is located in Maury County
    • Theta
      (27 miles [43.5 km] to the southwest)
      • Jump to our Gazetteer entry for Theta
      • Theta is located in Maury County
    • New Hope
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for New Hope have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Hope
      • New Hope is located in Maury County
      • Estimated population in 2014: 1,070 people
  • Sumner County
    • The following are listed by their distance from Haynes, with the one closest to Haynes listed first.
    • Driftwood Park
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Driftwood Park have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Driftwood Park
      • Driftwood Park is located in Sumner County
      • Estimated population in 2014: 2,908 people
    • Hendersonville
      (23 miles [37 km] to the north)
    • Goodlettsville
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for Goodlettsville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Goodlettsville
      • Goodlettsville is located in Sumner County
      • Population from the 2020 Census: 16,736 people
      • Jump to TripAdvisor's Tourism page for Goodlettsville <1>
    • Shackle Island
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Shackle Island have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shackle Island
      • Shackle Island is located in Sumner County
      • Population from the 2010 Census: 2,844 people
    • Gallatin
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Gallatin have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gallatin
      • Gallatin is located in Sumner County
      • Population from the 2020 Census: 44,335 people
      • Jump to TripAdvisor's Tourism page for Gallatin <1>
    • Ocana
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Ocana have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ocana
      • Ocana is located in Sumner County
      • Estimated population in 2014: 1,086 people
    • Millersville
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Millersville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Millersville
      • Millersville is located in Sumner County
      • Population from the 2020 Census: 6,798 people
      • Jump to TripAdvisor's Tourism page for Millersville <1>
  • Williamson County
    • The following are listed by their distance from Haynes, with the one closest to Haynes listed first.
    • Nolensville
      (3 miles [4.8 km] to the west)
      • Note: The GPS coordinates that we are using for Nolensville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nolensville
      • Nolensville is located in Williamson County
      • Population from the 2020 Census: 11,145 people
      • Jump to TripAdvisor's Tourism page for Nolensville <1>
    • Arrington
      (8 miles [12.9 km] to the southwest)
    • Brentwood
      (10 miles [16.1 km] to the west)
    • College Grove
      (12 miles [19.3 km] to the south)
    • McEwen ‑ Historic
      (13 miles [20.9 km] to the west)
      • Note: The GPS coordinates that we are using for McEwen have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McEwen
      • McEwen is located in Williamson County
      • Estimated population in 2014: 1,699 people
    • Peytonsville
      (14 miles [22.5 km] to the southwest)
      • Jump to our Gazetteer entry for Peytonsville
      • Peytonsville is located in Williamson County
    • Lynnwood Downs
      (14 miles [22.5 km] to the west)
      • Note: The GPS coordinates that we are using for Lynnwood Downs have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lynnwood Downs
      • Lynnwood Downs is located in Williamson County
      • Estimated population in 2014: 282 people
    • Franklin
      (15 miles [24.1 km] to the west)
    • Wildwood Estates
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Wildwood Estates have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wildwood Estates
      • Wildwood Estates is located in Williamson County
      • Population from the 2010 Census: 1,098 people
    • Berrys Chapel Heights
      (16 miles [25.7 km] to the west)
      • Note: The GPS coordinates that we are using for Berrys Chapel Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Berrys Chapel Heights
      • Berrys Chapel Heights is located in Williamson County
      • Estimated population in 2014: 551 people
    • Parry
      (16 miles [25.7 km] to the west)
      • Note: The GPS coordinates that we are using for Parry have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Parry
      • Parry is located in Williamson County
      • Estimated population in 2014: 262 people
    • Forest Home
      (18 miles [29 km] to the west)
      • Note: The GPS coordinates that we are using for Forest Home have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Forest Home
      • Forest Home is located in Williamson County
    • Old Town ‑ Historic
      (18 miles [29 km] to the west)
      • Note: The GPS coordinates that we are using for Old Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Old Town
      • Old Town is located in Williamson County
  • Wilson County
    • The following are listed by their distance from Haynes, with the one closest to Haynes listed first.
    • Rural Hill
      (11 miles [17.7 km] to the north)
      • Note: The GPS coordinates that we are using for Rural Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rural Hill
      • Rural Hill is located in Wilson County
    • Gladeville
      (14 miles [22.5 km] to the northeast)
    • Lynn Christie
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Lynn Christie have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lynn Christie
      • Lynn Christie is located in Wilson County
      • Estimated population in 2011: 6,411 people
    • Belinda City
      (15 miles [24.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Belinda City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belinda City
      • Belinda City is located in Wilson County
    • Mount Juliet
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Mount Juliet have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Juliet
      • Mount Juliet is located in Wilson County
      • Population from the 2020 Census: 38,526 people
      • Jump to TripAdvisor's Tourism page for Mount Juliet <1>
    • Beckwith
      (18 miles [29 km] to the northeast)
      • Note: The GPS coordinates that we are using for Beckwith have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beckwith
      • Beckwith is located in Wilson County
    • Leeville
      (18 miles [29 km] to the northeast)
      • Note: The GPS coordinates that we are using for Leeville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Leeville
      • Leeville is located in Wilson County
    • Cainsville
      (19 miles [30.6 km] to the east)
      • Note: The GPS coordinates that we are using for Cainsville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cainsville
      • Cainsville is located in Wilson County
    • Doaks Crossroads
      (22 miles [35.4 km] to the northeast)
      • Jump to our Gazetteer entry for Doaks Crossroads
      • Doaks Crossroads is located in Wilson County
      • Doaks Crossroads has also been known as:
      • Doaks
    • Laguardo
      (24 miles [38.6 km] to the north)
      • Jump to our Gazetteer entry for Laguardo
      • Laguardo is located in Wilson County
      • Estimated population in 2014: 132 people
    • Greenwood
      (24 miles [38.6 km] to the northeast)
      • Jump to our Gazetteer entry for Greenwood
      • Greenwood is located in Wilson County
    • Lebanon
      (24 miles [38.6 km] to the northeast)
    • Possum Town
      (25 miles [40.2 km] to the northeast)
      • Jump to our Gazetteer entry for Possum Town
      • Possum Town is located in Wilson County

For an expanded list of the communities that are closest to Haynes, see our County-by-County Page for Haynes.

Newspapers Published in Haynes ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 8 newspapers that have been published in the area around Haynes.

Although we're unaware of any newspapers that were published in the immediate area of Haynes, there are papers which were published within 10 miles [16.1 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Haynes.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Haynes:

Cemeteries Near Haynes ...

Below are cemeteries that are in the vicinity of Haynes.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Haynes covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Haynes, with the one closest to Haynes listed first.

  • Potts Cemetery
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for the Potts Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Potts Cemetery
  • Ray - Cooke Cemetery
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for the Ray - Cooke Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Ray - Cooke Cemetery
  • Potts Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Potts Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Potts Cemetery
  • Batey Cemetery
    (Less than 2 miles to the south)
  • Nevin Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Nevin Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Nevin Cemetery
  • Ray Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Ray Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Ray Cemetery
  • Holland Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Holland Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Holland Cemetery
  • Walpole - Garner Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the Walpole - Garner Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Walpole - Garner Cemetery
  • Mullins Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the Mullins Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mullins Cemetery
  • Williams Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Williams Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Williams Cemetery
  • Brittain Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Brittain Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Brittain Cemetery
  • Chrisman Cemetery
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for the Chrisman Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Chrisman Cemetery
  • Continue List   (1472 more) ...
    • Potts Cemetery
      (Less than 2 miles to the west)
      • Note: The GPS coordinates that we are using for the Potts Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Potts Cemetery
    • Bennett Cemetery
      (Less than 2 miles to the south)
      • Note: The GPS coordinates that we are using for the Bennett Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Bennett Cemetery
    • Naron Cemetery
      (Less than 2 miles to the south)
      • Note: The GPS coordinates that we are using for the Naron Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Naron Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

While we didn't find Haynes in the Atlas, the following 1895 communities would have been found near the current location of Haynes.

These communities are listed based on their distance from Haynes, with the one closest to Haynes listed first.

  • Rocky Fork
    (2 miles [3.2 km] to the south)
    • Note: The GPS coordinates that we are using for Rocky Fork have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rocky Fork
    • Rocky Fork is located in Rutherford County
  • Nolensville
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for Nolensville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Nolensville
    • Nolensville is located in Williamson County
    • Population from the 2020 Census: 11,145 people
    • Jump to TripAdvisor's Tourism page for Nolensville <1>
  • Smyrna
    (4 miles [6.4 km] to the east)
    • Jump to our Gazetteer entry for Smyrna
    • Smyrna is located in Rutherford County
    • Population from the 2020 Census: 53,185 people
    • Jump to TripAdvisor's Tourism page for Smyrna <1>
  • La Vergne
    (4 miles [6.4 km] to the north)
  • Kimbro
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Kimbro have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kimbro
    • Kimbro is located in Davidson County
  • Almaville
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Almaville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Almaville
    • Almaville is located in Rutherford County
  • Wrencoe
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Wrencoe have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wrencoe
    • Wrencoe is located in Davidson County
  • Brooklin
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Brooklin have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brooklin
    • Brooklin is located in Davidson County
  • Mount View
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Mount View have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount View
    • Mount View is located in Davidson County
  • Antioch
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Antioch have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Antioch
    • Antioch is located in Davidson County
    • Jump to TripAdvisor's Tourism page for Antioch <1>
  • Arrington
    (8 miles [12.9 km] to the southwest)
  • Triune
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Triune have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Triune
    • Triune is located in Williamson County
  • Continue List   (17 more) ...
    • Snell ‑ Historic
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Snell have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Snell
      • Snell is located in Rutherford County
      • Estimated population in 2014: 1,361 people
    • Clovercroft
      (9 miles [14.5 km] to the west)
      • Note: The GPS coordinates that we are using for Clovercroft have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clovercroft
      • Clovercroft is located in Williamson County
    • Patterson
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Patterson have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Patterson
      • Patterson is located in Rutherford County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Haynes. See our List of 1890's Communities around Haynes.

Unfortunately, we don't know of a website for Haynes. If you can help, please contact us through our Feedback Page.

The official website for Rutherford County: www.rutherfordcounty.org/

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Haynes) to Point B.Our distance measurements begin at a specific point in Haynes. The point we use is located at these GPS coordinates - Latitude: 35.9612, Longitude: -86.6000       In this case, the coordinates for Haynes have been provided by the Geographic Names Information System (GNIS).
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Haynes, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024