RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Ashland County >> McKay >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Ohio

The Commemorative Quarter for Ohio





TripAdvisor Links

Introduction ...

When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

While we are unaware of a TripAdvisor Tourism page that is specific to McKay, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to McKay - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 61 communities listed:

  • Apple Creek
    (21 miles [33.8 km] to the east)
    • Note: The GPS coordinates that we are using for Apple Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Apple Creek
    • Apple Creek is located in Wayne County
    • Population from the 2020 Census: 1,185 people
    • Jump to TripAdvisor's Tourism page for Apple Creek <3>
  • Ashland
    (11 miles [17.7 km] to the north)
  • Bellville
    (15 miles [24.1 km] to the southwest)
    • Jump to our Gazetteer entry for Bellville
    • Bellville is located in Richland County
    • Population from the 2020 Census: 1,935 people
    • Bellville has also been known as:
    • McClures Settlement
    • McClure
    • Jump to TripAdvisor's Tourism page for Bellville <3>
  • Berlin
    (25 miles [40.2 km] to the east)
  • Big Prairie
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Big Prairie have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Big Prairie
    • Big Prairie is located in Holmes County
    • Jump to TripAdvisor's Tourism page for Big Prairie <3>
  • Bladensburg
    (29 miles [46.7 km] to the south)
  • Burbank
    (23 miles [37 km] to the northeast)
    • Note: The GPS coordinates that we are using for Burbank have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Burbank
    • Burbank is located in Wayne County
    • Population from the 2020 Census: 199 people
    • Jump to TripAdvisor's Tourism page for Burbank <3>
  • Butler
    (12 miles [19.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Butler have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Butler
    • Butler is located in Richland County
    • Population from the 2020 Census: 897 people
    • Jump to TripAdvisor's Tourism page for Butler <3>
  • Charm
    (27 miles [43.5 km] to the southeast)
  • Chesterville
    (27 miles [43.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Chesterville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chesterville
    • Chesterville is located in Morrow County
    • Population from the 2020 Census: 234 people
    • Jump to TripAdvisor's Tourism page for Chesterville <3>
  • Chippewa Lake
    (30 miles [48.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Chippewa Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chippewa Lake
    • Chippewa Lake is located in Medina County
    • Population from the 2020 Census: 749 people
    • Former name for Chippewa Lake:
    • Chippewa-on-the-Lake
    • Jump to TripAdvisor's Tourism page for Chippewa Lake <3>
  • Crestline
    (26 miles [41.8 km] to the west)
  • Creston
    (25 miles [40.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Creston have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Creston
    • Creston is located in Wayne County
    • Population from the 2020 Census: 2,184 people
    • Jump to TripAdvisor's Tourism page for Creston <3>
  • Dalton
    (29 miles [46.7 km] to the east)
    • Note: The GPS coordinates that we are using for Dalton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dalton
    • Dalton is located in Wayne County
    • Population from the 2020 Census: 1,891 people
    • Jump to TripAdvisor's Tourism page for Dalton <3>
  • Danville
    (17 miles [27.4 km] to the south)
  • Fredericksburg
    (19 miles [30.6 km] to the east)
    • Note: The GPS coordinates that we are using for Fredericksburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fredericksburg
    • Fredericksburg is located in Wayne County
    • Population from the 2020 Census: 414 people
    • Jump to TripAdvisor's Tourism page for Fredericksburg <3>
  • Fredericktown
    (22 miles [35.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Fredericktown have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fredericktown
    • Fredericktown is located in Knox County
    • Population from the 2020 Census: 2,526 people
    • Jump to TripAdvisor's Tourism page for Fredericktown <3>
  • Galion
    (28 miles [45.1 km] to the west)
  • Gambier
    (24 miles [38.6 km] to the south)
    • Note: The GPS coordinates that we are using for Gambier have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gambier
    • Gambier is located in Knox County
    • Population from the 2020 Census: 2,502 people
    • Jump to TripAdvisor's Tourism page for Gambier <3>
  • Glenmont
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Glenmont have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Glenmont
    • Glenmont is located in Holmes County
    • Population from the 2020 Census: 298 people
    • Jump to TripAdvisor's Tourism page for Glenmont <3>
  • Greenwich
    (26 miles [41.8 km] to the northwest)
  • Holmesville
    (17 miles [27.4 km] to the east)
  • Howard
    (21 miles [33.8 km] to the south)
    • Note: The GPS coordinates that we are using for Howard have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Howard
    • Howard is located in Knox County
    • Jump to TripAdvisor's Tourism page for Howard <3>
  • Jeromesville
    (7 miles [11.3 km] to the north)
  • Kidron
    (26 miles [41.8 km] to the east)
    • Note: The GPS coordinates that we are using for Kidron have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kidron
    • Kidron is located in Wayne County
    • Jump to TripAdvisor's Tourism page for Kidron <3>
  • Killbuck
    (19 miles [30.6 km] to the southeast)
    • Note: The GPS coordinates that we are using for Killbuck have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Killbuck
    • Killbuck is located in Holmes County
    • Population from the 2020 Census: 921 people
    • Jump to TripAdvisor's Tourism page for Killbuck <3>
  • Lakeville
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Lakeville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lakeville
    • Lakeville is located in Holmes County
    • Jump to TripAdvisor's Tourism page for Lakeville <3>
  • Lexington
    (17 miles [27.4 km] to the west)
    • Note: The GPS coordinates that we are using for Lexington have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lexington
    • Lexington is located in Richland County
    • Population from the 2020 Census: 4,695 people
    • Jump to TripAdvisor's Tourism page for Lexington <3>
  • Lodi
    (25 miles [40.2 km] to the northeast)
    • Jump to our Gazetteer entry for Lodi
    • Lodi is located in Medina County
    • Population from the 2020 Census: 2,913 people
    • Jump to TripAdvisor's Tourism page for Lodi <3>
  • Loudonville
    (4 miles [6.4 km] to the south)
  • Lucas
    (9 miles [14.5 km] to the west)
  • Mansfield
    (14 miles [22.5 km] to the west)
  • Marshallville
    (29 miles [46.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Marshallville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Marshallville
    • Marshallville is located in Wayne County
    • Population from the 2020 Census: 779 people
    • Jump to TripAdvisor's Tourism page for Marshallville <3>
  • Martinsburg
    (30 miles [48.3 km] to the south)
    • Note: The GPS coordinates that we are using for Martinsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Martinsburg
    • Martinsburg is located in Knox County
    • Population from the 2020 Census: 232 people
    • Jump to TripAdvisor's Tourism page for Martinsburg <3>
  • Millersburg
    (20 miles [32.2 km] to the southeast)
  • Mount Eaton
    (28 miles [45.1 km] to the east)
    • Note: The GPS coordinates that we are using for Mount Eaton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Eaton
    • Mount Eaton is located in Wayne County
    • Population from the 2020 Census: 234 people
    • Jump to TripAdvisor's Tourism page for Mount Eaton <3>
  • Mount Hope
    (24 miles [38.6 km] to the east)
  • Mount Vernon
    (25 miles [40.2 km] to the southwest)
  • New Bedford
    (30 miles [48.3 km] to the southeast)
  • New London
    (27 miles [43.5 km] to the north)
    • Note: The GPS coordinates that we are using for New London have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New London
    • New London is located in Huron County
    • Population from the 2020 Census: 2,345 people
    • Jump to TripAdvisor's Tourism page for New London <3>
  • Nova
    (22 miles [35.4 km] to the north)
  • Ontario
    (19 miles [30.6 km] to the west)
    • Note: The GPS coordinates that we are using for Ontario have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ontario
    • Ontario is located in Richland County
    • Population from the 2020 Census: 6,102 people
    • Jump to TripAdvisor's Tourism page for Ontario <3>
  • Orrville
    (26 miles [41.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Orrville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Orrville
    • Orrville is located in Wayne County
    • Population from the 2020 Census: 8,433 people
    • Jump to TripAdvisor's Tourism page for Orrville <3>
  • Perrysville
    (4 miles [6.4 km] to the southwest)
  • Rittman
    (30 miles [48.3 km] to the northeast)
  • Savannah
    (19 miles [30.6 km] to the north)
    • Note: The GPS coordinates that we are using for Savannah have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Savannah
    • Savannah is located in Ashland County
    • Population from the 2020 Census: 416 people
    • Jump to TripAdvisor's Tourism page for Savannah <3>
  • Seville
    (28 miles [45.1 km] to the northeast)
  • Shelby
    (24 miles [38.6 km] to the northwest)
    • Note: The GPS coordinates that we are using for Shelby have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shelby
    • Shelby is located in Richland County
    • Population from the 2020 Census: 9,066 people
    • Jump to TripAdvisor's Tourism page for Shelby <3>
  • Shiloh
    (26 miles [41.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Shiloh have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shiloh
    • Shiloh is located in Richland County
    • Population from the 2020 Census: 617 people
    • Jump to TripAdvisor's Tourism page for Shiloh <3>
  • Shreve
    (11 miles [17.7 km] to the east)
    • Note: The GPS coordinates that we are using for Shreve have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shreve
    • Shreve is located in Wayne County
    • Population from the 2020 Census: 1,526 people
    • Jump to TripAdvisor's Tourism page for Shreve <3>
  • Smithville
    (22 miles [35.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Smithville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Smithville
    • Smithville is located in Wayne County
    • Population from the 2020 Census: 1,261 people
    • Jump to TripAdvisor's Tourism page for Smithville <3>
  • Spencer
    (27 miles [43.5 km] to the north)
  • Sterling
    (27 miles [43.5 km] to the northeast)
  • Sullivan
    (22 miles [35.4 km] to the north)
    • Note: The GPS coordinates that we are using for Sullivan have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sullivan
    • Sullivan is located in Ashland County
    • Jump to TripAdvisor's Tourism page for Sullivan <3>
  • Tiro
    (30 miles [48.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Tiro have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tiro
    • Tiro is located in Crawford County
    • Population from the 2020 Census: 262 people
    • Jump to TripAdvisor's Tourism page for Tiro <3>
  • Walhonding
    (24 miles [38.6 km] to the south)
  • Walnut Creek
    (29 miles [46.7 km] to the east)
    • Note: The GPS coordinates that we are using for Walnut Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Walnut Creek
    • Walnut Creek is located in Holmes County
    • Jump to TripAdvisor's Tourism page for Walnut Creek <3>
  • Warsaw
    (28 miles [45.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Warsaw have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Warsaw
    • Warsaw is located in Coshocton County
    • Population from the 2020 Census: 690 people
    • Jump to TripAdvisor's Tourism page for Warsaw <3>
  • West Salem
    (19 miles [30.6 km] to the north)
  • Winesburg
    (29 miles [46.7 km] to the east)
    • Note: The GPS coordinates that we are using for Winesburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Winesburg
    • Winesburg is located in Holmes County
    • Jump to TripAdvisor's Tourism page for Winesburg <3>
  • Wooster
    (17 miles [27.4 km] to the northeast)

Unfortunately, we don't know of an official website for McKay. If you can help, please contact us through our Feedback Page.

The official website for Ashland County: www.ashlandcounty.org/

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- McKay) to Point B.Our distance measurements begin at a specific point in McKay. The point we use is located at these GPS coordinates - Latitude: 40.7059, Longitude: -82.2429       In this case, the coordinates for McKay have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024