Nearest Communities to Daniel,
Listed County-By-County
The purpose of this page is to identify those communities that are closest to Daniel, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Daniel:
We have great-grandparents who lived in a small community in the northwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.
When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.
Keep in mind that when we give a distance, it's a 'straight-line' distance from Daniel.<1>
If you're researching your genealogy, we hope that the following information helps.
Daniel is located in Smith County.
The following 7 counties adjoin and form the boundaries of Smith County: Covington, Jasper, Jones, Newton, Rankin, Scott & Simpson.
Our Gazetteer shows that there are 293 communities within 40 miles [64.4 km]<1> of Daniel. Of these communities, 259 are located in counties other than Smith County.
We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.
After starting with the home county for Daniel (which is Smith County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Daniel
For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.
- Smith County (where Daniel resides)
- County Seat for Smith: Raleigh
- Genealogy Websites ...
- Nearest Communities to Daniel ...
- These communities are listed by their distance from Daniel.
- Gunn
(3 miles [4.8 km] to the south)
- Note: The GPS coordinates that we are using for Gunn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gunn
- Gunn is located in Smith County
- Polkville
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Polkville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Polkville
- Polkville is located in Smith County
- Population from the 2020 Census: 819 people
- White Oak
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for White Oak have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Oak
- White Oak is located in Smith County
- Heater
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Heater have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Heater
- Heater is located in Smith County
- Trenton
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Trenton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trenton
- Trenton is located in Smith County
- Lingle
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Lingle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lingle
- Lingle is located in Smith County
- Traxler
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Traxler have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Traxler
- Traxler is located in Smith County
- Burns
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Burns have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burns
- Burns is located in Smith County
- Lemon
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Lemon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lemon
- Lemon is located in Smith County
- Lorena
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Lorena have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lorena
- Lorena is located in Smith County
- Shongelo
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Shongelo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shongelo
- Shongelo is located in Smith County
- Wicker
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Wicker have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wicker
- Wicker is located in Smith County
- Continue List (22 more) ...
- Raleigh
(13 miles [20.9 km] to the southeast)
- Klein
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Klein have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Klein
- Klein is located in Smith County
- Sand Point
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Sand Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sand Point
- Sand Point is located in Smith County
- Cohay
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Cohay have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cohay
- Cohay is located in Smith County
- Union
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Union have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union
- Union is located in Smith County
- Shady Grove
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Shady Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shady Grove
- Shady Grove is located in Smith County
- Bezer
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Bezer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bezer
- Bezer is located in Smith County
- Pineville
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Pineville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pineville
- Pineville is located in Smith County
- Center Ridge
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Center Ridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Center Ridge
- Center Ridge is located in Smith County
- Mount Pleasant
(19 miles [30.6 km] to the east)
- Note: The GPS coordinates that we are using for Mount Pleasant have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Pleasant
- Mount Pleasant is located in Smith County
- Milton
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Milton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milton
- Milton is located in Smith County
- Mize
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Mize have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mize
- Mize is located in Smith County
- Population from the 2020 Census: 323 people
- Jump to TripAdvisor's Tourism page for Mize <4>
- Sylvarena
(21 miles [33.8 km] to the east)
- Jump to our Gazetteer entry for Sylvarena
- Sylvarena is located in Smith County
- Population from the 2020 Census: 106 people
- Mineral Springs
(21 miles [33.8 km] to the southeast)
- Jump to our Gazetteer entry for Mineral Springs
- Mineral Springs is located in Smith County
- Clear Springs
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Clear Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clear Springs
- Clear Springs is located in Smith County
- Zion Hill
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Zion Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zion Hill
- Zion Hill is located in Smith County
- New Haven
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for New Haven have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Haven
- New Haven is located in Smith County
- Wisner
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Wisner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wisner
- Wisner is located in Smith County
- Bunker Hill
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Bunker Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bunker Hill
- Bunker Hill is located in Smith County
- Taylorsville
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Taylorsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taylorsville
- Taylorsville is located in Smith County
- Population from the 2020 Census: 1,241 people
- Jump to TripAdvisor's Tourism page for Taylorsville <4>
- Gambrell
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Gambrell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gambrell
- Gambrell is located in Smith County
- Simpson
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Simpson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Simpson
- Simpson is located in Smith County
- Copiah County
- County Seat for Copiah: Hazlehurst
- Genealogy Websites ...
- Nearest Communities to Daniel ...
- Old Georgetown ‑ Historic
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Old Georgetown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Georgetown
- Old Georgetown is located in Copiah County
- Covington County
- County Seat for Covington: Collins
- Genealogy Websites ...
- Nearest Communities to Daniel ...
- These communities are listed by their distance from Daniel.
- McNair
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for McNair have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McNair
- McNair is located in Covington County
- Mount Olive
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Mount Olive have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Olive
- Mount Olive is located in Covington County
- Population from the 2020 Census: 896 people
- Smith
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Smith have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smith
- Smith is located in Covington County
- Gilmore
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Gilmore have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gilmore
- Gilmore is located in Covington County
- Arbo
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Arbo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arbo
- Arbo is located in Covington County
- Blakley Creek
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Blakley Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blakley Creek
- Blakley Creek is located in Covington County
- Cooley Springs
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Cooley Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cooley Springs
- Cooley Springs is located in Covington County
- Mount Pleasant
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Mount Pleasant have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Pleasant
- Mount Pleasant is located in Covington County
- Rock Hill
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Rock Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock Hill
- Rock Hill is located in Covington County
- Union
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Union have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union
- Union is located in Covington County
- Hinds County
- County Website: www.co.hinds.ms.us/
- County Seat for Hinds: Jackson
- Genealogy Websites ...
- Nearest Communities to Daniel ...
- These communities are listed by their distance from Daniel.
- Wards Ferry
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Wards Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wards Ferry
- Wards Ferry is located in Hinds County
- Cooks Ferry
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Cooks Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cooks Ferry
- Cooks Ferry is located in Hinds County
- East Manor Estates
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for East Manor Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Manor Estates
- East Manor Estates is located in Hinds County
- Eastover
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Eastover have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eastover
- Eastover is located in Hinds County
- North Town Plaza
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for North Town Plaza have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Town Plaza
- North Town Plaza is located in Hinds County
- Rolling Meadows
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Rolling Meadows have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rolling Meadows
- Rolling Meadows is located in Hinds County
- Sherwood Forest
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Sherwood Forest have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sherwood Forest
- Sherwood Forest is located in Hinds County
- Whites Ferry
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Whites Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whites Ferry
- Whites Ferry is located in Hinds County
- Highland Meadows
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Highland Meadows have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Highland Meadows
- Highland Meadows is located in Hinds County
- Jackson
(29 miles [46.7 km] to the northwest)
- Northpointe
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Northpointe have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Northpointe
- Northpointe is located in Hinds County
- Dimes Ferry
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Dimes Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dimes Ferry
- Dimes Ferry is located in Hinds County
- Continue List (10 more) ...
- Elton
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Elton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elton
- Elton is located in Hinds County
- Nogan
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Nogan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nogan
- Nogan is located in Hinds County
- Woodland Hills
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Woodland Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodland Hills
- Woodland Hills is located in Hinds County
- Choctaw Village
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Choctaw Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Choctaw Village
- Choctaw Village is located in Hinds County
- Dears Ferry
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Dears Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dears Ferry
- Dears Ferry is located in Hinds County
- Elton Place
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Elton Place have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elton Place
- Elton Place is located in Hinds County
- Fortners Ferry
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Fortners Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fortners Ferry
- Fortners Ferry is located in Hinds County
- Leavell Woods
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Leavell Woods have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leavell Woods
- Leavell Woods is located in Hinds County
- Southwood Estates
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Southwood Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Southwood Estates
- Southwood Estates is located in Hinds County
- Warren Place
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Warren Place have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Warren Place
- Warren Place is located in Hinds County
- Jasper County
- County Seat for Jasper: Bay Springs
- Genealogy Websites ...
- Nearest Communities to Daniel ...
- These communities are listed by their distance from Daniel.
- Hamlet ‑ Historic
(26 miles [41.8 km] to the east)
- Jump to our Gazetteer entry for Hamlet
- Hamlet is located in Jasper County
- Stevens ‑ Historic
(26 miles [41.8 km] to the east)
- Jump to our Gazetteer entry for Stevens
- Stevens is located in Jasper County
- Success ‑ Historic
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Success have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Success
- Success is located in Jasper County
- Bay Springs
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Bay Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bay Springs
- Bay Springs is located in Jasper County
- Population from the 2020 Census: 1,650 people
- Jump to TripAdvisor's Tourism page for Bay Springs <4>
- Burns ‑ Historic
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Burns have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burns
- Burns is located in Jasper County
- Louin
(27 miles [43.5 km] to the east)
- Jump to our Gazetteer entry for Louin
- Louin is located in Jasper County
- Population from the 2020 Census: 262 people
- Etchehoma ‑ Historic
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Etchehoma have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Etchehoma
- Etchehoma is located in Jasper County
- Montrose
(28 miles [45.1 km] to the east)
- Jump to our Gazetteer entry for Montrose
- Montrose is located in Jasper County
- Population from the 2020 Census: 137 people
- Jefferson Davis County
- County Seat for Jefferson Davis: Prentiss
- Genealogy Websites ...
- Nearest Communities to Daniel ...
- These communities are listed by their distance from Daniel.
- Gwinville
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Gwinville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gwinville
- Gwinville is located in Jefferson Davis County
- Clem
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Clem have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clem
- Clem is located in Jefferson Davis County
- Madison County
- County Website: www.madison-co.com/
- County Seat for Madison: Canton
- Genealogy Websites ...
- Nearest Communities to Daniel ...
- These communities are listed by their distance from Daniel.
- Collins Ferry
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Collins Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Collins Ferry
- Collins Ferry is located in Madison County
- Grants Ferry
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Grants Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grants Ferry
- Grants Ferry is located in Madison County
- The Breakers
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for The Breakers have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for The Breakers
- The Breakers is located in Madison County
- Cockrells Ferry
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Cockrells Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cockrells Ferry
- Cockrells Ferry is located in Madison County
- Country Club Woods
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Country Club Woods have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Country Club Woods
- Country Club Woods is located in Madison County
- Gateway North
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Gateway North have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gateway North
- Gateway North is located in Madison County
- Johnson Ferry
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Johnson Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Johnson Ferry
- Johnson Ferry is located in Madison County
- Meeks Ferry
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Meeks Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meeks Ferry
- Meeks Ferry is located in Madison County
- Roses Bluff
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Roses Bluff have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roses Bluff
- Roses Bluff is located in Madison County
- Tavern Hill
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Tavern Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tavern Hill
- Tavern Hill is located in Madison County
- Tidewater
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Tidewater have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tidewater
- Tidewater is located in Madison County
- Treasure Cove
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Treasure Cove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Treasure Cove
- Treasure Cove is located in Madison County
- Continue List (7 more) ...
- Village Glen
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Village Glen have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Village Glen
- Village Glen is located in Madison County
- Village Square
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Village Square have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Village Square
- Village Square is located in Madison County
- Moores Ferry
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Moores Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moores Ferry
- Moores Ferry is located in Madison County
- Greenbrook
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Greenbrook have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenbrook
- Greenbrook is located in Madison County
- Sandalwood
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Sandalwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sandalwood
- Sandalwood is located in Madison County
- Squirrel Hill
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Squirrel Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Squirrel Hill
- Squirrel Hill is located in Madison County
- Twin Harbor
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Twin Harbor have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Twin Harbor
- Twin Harbor is located in Madison County
- Newton County
- County Seat for Newton: Decatur
- Genealogy Websites ...
- Nearest Communities to Daniel ...
- These communities are listed by their distance from Daniel.
- Bartlett
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Bartlett have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bartlett
- Bartlett is located in Newton County
- Tanglewood
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Tanglewood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tanglewood
- Tanglewood is located in Newton County
- Roberts
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Roberts have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roberts
- Roberts is located in Newton County
- Six Towns ‑ Historic
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Six Towns have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Six Towns
- Six Towns is located in Newton County
- Patrons Union ‑ Historic
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Patrons Union have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patrons Union
- Patrons Union is located in Newton County
- Hazel
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Hazel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hazel
- Hazel is located in Newton County
- Rankin County
- Given the large number of communities that are located in Rankin County, we have limited the list to those within 26 miles [41.8 km]<1> of Daniel (about 100 communities).
- County Website: www.rankincounty.org/
- County Seat for Rankin: Brandon
- Genealogy Websites ...
- Nearest Communities to Daniel ...
- These communities are listed by their distance from Daniel.
- Mayton
(2 miles [3.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Mayton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mayton
- Mayton is located in Rankin County
- Rufus
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Rufus have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rufus
- Rufus is located in Rankin County
- Puckett
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Puckett have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Puckett
- Puckett is located in Rankin County
- Population from the 2020 Census: 346 people
- Galilee
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Galilee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Galilee
- Galilee is located in Rankin County
- Johns
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Johns have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Johns
- Johns is located in Rankin County
- Lynwood ‑ Historic
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Lynwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynwood
- Lynwood is located in Rankin County
- Joe ‑ Historic
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Joe have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Joe
- Joe is located in Rankin County
- Bafrick ‑ Historic
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Bafrick have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bafrick
- Bafrick is located in Rankin County
- Cross Roads
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Cross Roads have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cross Roads
- Cross Roads is located in Rankin County
- Burnham ‑ Historic
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Burnham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burnham
- Burnham is located in Rankin County
- Moseley ‑ Historic
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Moseley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moseley
- Moseley is located in Rankin County
- Shiloh ‑ Historic
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Shiloh have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shiloh
- Shiloh is located in Rankin County
- Continue List (107 more) ...
- Cato
(9 miles [14.5 km] to the west)
- Jump to our Gazetteer entry for Cato
- Cato is located in Rankin County
- Fink Bine ‑ Historic
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Fink Bine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fink Bine
- Fink Bine is located in Rankin County
- Dobson ‑ Historic
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Dobson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dobson
- Dobson is located in Rankin County
- Rock Hill
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Rock Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock Hill
- Rock Hill is located in Rankin County
- Pelahatchie
(13 miles [20.9 km] to the north)
- Milro ‑ Historic
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Milro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milro
- Milro is located in Rankin County
- Shady Dell ‑ Historic
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Shady Dell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shady Dell
- Shady Dell is located in Rankin County
- Gulde
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Gulde have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gulde
- Gulde is located in Rankin County
- Rankin
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Rankin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rankin
- Rankin is located in Rankin County
- Sherwood Forest
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Sherwood Forest have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sherwood Forest
- Sherwood Forest is located in Rankin County
- Belpine
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Belpine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belpine
- Belpine is located in Rankin County
- George ‑ Historic
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for George have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for George
- George is located in Rankin County
- Piney Woods
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Piney Woods have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Piney Woods
- Piney Woods is located in Rankin County
- Comeby ‑ Historic
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Comeby have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Comeby
- Comeby is located in Rankin County
- Pat
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Pat have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pat
- Pat is located in Rankin County
- Thomasville
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Thomasville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thomasville
- Thomasville is located in Rankin County
- Easthaven
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Easthaven have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Easthaven
- Easthaven is located in Rankin County
- Abernathy ‑ Historic
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Abernathy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Abernathy
- Abernathy is located in Rankin County
- Brandon
(19 miles [30.6 km] to the northwest)
- Value
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Value have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Value
- Value is located in Rankin County
- Star
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Star have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Star
- Star is located in Rankin County
- Hunters Woods
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Hunters Woods have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hunters Woods
- Hunters Woods is located in Rankin County
- Dane ‑ Historic
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Dane have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dane
- Dane is located in Rankin County
- Leesburg
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Leesburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leesburg
- Leesburg is located in Rankin County
- Crossgates
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Crossgates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crossgates
- Crossgates is located in Rankin County
- Greenfield
(21 miles [33.8 km] to the northwest)
- Jump to our Gazetteer entry for Greenfield
- Greenfield is located in Rankin County
- Grove Park
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Grove Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grove Park
- Grove Park is located in Rankin County
- Langford
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Langford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Langford
- Langford is located in Rankin County
- Terrapin Hill
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Terrapin Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Terrapin Hill
- Terrapin Hill is located in Rankin County
- Linden ‑ Historic
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Linden have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Linden
- Linden is located in Rankin County
- Monterey
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Monterey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monterey
- Monterey is located in Rankin County
- Whitfield
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Whitfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitfield
- Whitfield is located in Rankin County
- Bilbros Corner
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Bilbros Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bilbros Corner
- Bilbros Corner is located in Rankin County
- West Leesburg
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for West Leesburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Leesburg
- West Leesburg is located in Rankin County
- Castlewoods
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Castlewoods have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Castlewoods
- Castlewoods is located in Rankin County
- The Commons
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for The Commons have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for The Commons
- The Commons is located in Rankin County
- Anse
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Anse have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anse
- Anse is located in Rankin County
- Country Place
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Country Place have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Country Place
- Country Place is located in Rankin County
- Creekwood Place
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Creekwood Place have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Creekwood Place
- Creekwood Place is located in Rankin County
- Mill Creek Corners
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Mill Creek Corners have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mill Creek Corners
- Mill Creek Corners is located in Rankin County
- Mill Creek Place
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Mill Creek Place have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mill Creek Place
- Mill Creek Place is located in Rankin County
- Mill Creek
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Mill Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mill Creek
- Mill Creek is located in Rankin County
- Millrun
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Millrun have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millrun
- Millrun is located in Rankin County
- Paradise Point
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Paradise Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Paradise Point
- Paradise Point is located in Rankin County
- Pelahatchie Woods
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Pelahatchie Woods have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pelahatchie Woods
- Pelahatchie Woods is located in Rankin County
- Summerwood
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Summerwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Summerwood
- Summerwood is located in Rankin County
- Sunrise Point
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Sunrise Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sunrise Point
- Sunrise Point is located in Rankin County
- Waterwood
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Waterwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waterwood
- Waterwood is located in Rankin County
- Florence
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Florence
- Florence is located in Rankin County
- Population from the 2020 Census: 4,531 people
- Jump to TripAdvisor's Tourism page for Florence <4>
- Arrowhead Point
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Arrowhead Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arrowhead Point
- Arrowhead Point is located in Rankin County
- Audubon Point
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Audubon Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Audubon Point
- Audubon Point is located in Rankin County
- Belaire
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Belaire have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belaire
- Belaire is located in Rankin County
- Bellegrove
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Bellegrove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bellegrove
- Bellegrove is located in Rankin County
- Bridlewood
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Bridlewood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bridlewood
- Bridlewood is located in Rankin County
- Dogwood Place
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Dogwood Place have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dogwood Place
- Dogwood Place is located in Rankin County
- Fannin
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Fannin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fannin
- Fannin is located in Rankin County
- Forest Point
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Forest Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forest Point
- Forest Point is located in Rankin County
- Northwoods
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Northwoods have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Northwoods
- Northwoods is located in Rankin County
- Pearl
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Pearl have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pearl
- Pearl is located in Rankin County
- Population from the 2020 Census: 26,560 people
- Jump to TripAdvisor's Tourism page for Pearl <4>
- Skyway Hills
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Skyway Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Skyway Hills
- Skyway Hills is located in Rankin County
- Turtle Creek
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Turtle Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turtle Creek
- Turtle Creek is located in Rankin County
- Howell ‑ Historic
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Howell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howell
- Howell is located in Rankin County
- King
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for King have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for King
- King is located in Rankin County
- Mountain Creek ‑ Historic
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Mountain Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mountain Creek
- Mountain Creek is located in Rankin County
- Pearson
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Pearson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pearson
- Pearson is located in Rankin County
- Pisgah
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Pisgah have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pisgah
- Pisgah is located in Rankin County
- Ashland Estates
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Ashland Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ashland Estates
- Ashland Estates is located in Rankin County
- Flowood
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Flowood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flowood
- Flowood is located in Rankin County
- Population from the 2020 Census: 9,556 people
- Jump to TripAdvisor's Tourism page for Flowood <4>
- Harbourview
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Harbourview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harbourview
- Harbourview is located in Rankin County
- Hickory Glen
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Hickory Glen have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hickory Glen
- Hickory Glen is located in Rankin County
- Kings Heights
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Kings Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kings Heights
- Kings Heights is located in Rankin County
- Lakeshore
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Lakeshore have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakeshore
- Lakeshore is located in Rankin County
- Luckney
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Luckney have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Luckney
- Luckney is located in Rankin County
- McLaurin Heights
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for McLaurin Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McLaurin Heights
- McLaurin Heights is located in Rankin County
- New Fannin
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for New Fannin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Fannin
- New Fannin is located in Rankin County
- Patton Place
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Patton Place have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patton Place
- Patton Place is located in Rankin County
- Timber Lakes
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Timber Lakes have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Timber Lakes
- Timber Lakes is located in Rankin County
- Woodlake
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Woodlake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodlake
- Woodlake is located in Rankin County
- Cunningham Heights
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Cunningham Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cunningham Heights
- Cunningham Heights is located in Rankin County
- Grandview Heights
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Grandview Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grandview Heights
- Grandview Heights is located in Rankin County
- Pine Park
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Pine Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Park
- Pine Park is located in Rankin County
- Plainview
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Rankin County
- Randall Place
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Randall Place have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Randall Place
- Randall Place is located in Rankin County
- Richland Estates
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Richland Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Richland Estates
- Richland Estates is located in Rankin County
- Eureka
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Eureka have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eureka
- Eureka is located in Rankin County
- Sand Hill
(26 miles [41.8 km] to the north)
- Jump to our Gazetteer entry for Sand Hill
- Sand Hill is located in Rankin County
- Barnes Prairie
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Barnes Prairie have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnes Prairie
- Barnes Prairie is located in Rankin County
- Bates Park
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Bates Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bates Park
- Bates Park is located in Rankin County
- Goshen Springs
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Goshen Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goshen Springs
- Goshen Springs is located in Rankin County
- Wells
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Wells have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wells
- Wells is located in Rankin County
- Cedar Point
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Cedar Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Point
- Cedar Point is located in Rankin County
- Cleary Heights
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Cleary Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cleary Heights
- Cleary Heights is located in Rankin County
- Cleary
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Cleary have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cleary
- Cleary is located in Rankin County
- Lakeland
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Lakeland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakeland
- Lakeland is located in Rankin County
- Melvin Heights
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Melvin Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Melvin Heights
- Melvin Heights is located in Rankin County
- Plain
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Plain have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plain
- Plain is located in Rankin County
- Richland
(26 miles [41.8 km] to the west)
- Scott County
- County Seat for Scott: Forest
- Genealogy Websites ...
- Nearest Communities to Daniel ...
- These communities are listed by their distance from Daniel.
- Cooperville
(7 miles [11.3 km] to the north)
- Jump to our Gazetteer entry for Cooperville
- Cooperville is located in Scott County
- Kracker Station
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Kracker Station have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kracker Station
- Kracker Station is located in Scott County
- Independence
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Independence have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Independence
- Independence is located in Scott County
- Stage
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Stage have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stage
- Stage is located in Scott County
- Pulaski
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Pulaski have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pulaski
- Pulaski is located in Scott County
- Clarkburg
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Clarkburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarkburg
- Clarkburg is located in Scott County
- Hunter Town
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Hunter Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hunter Town
- Hunter Town is located in Scott County
- Frogtown
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Frogtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Frogtown
- Frogtown is located in Scott County
- Homewood
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Homewood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Homewood
- Homewood is located in Scott County
- Morton
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Morton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morton
- Morton is located in Scott County
- Population from the 2020 Census: 3,522 people
- Jump to TripAdvisor's Tourism page for Morton <4>
- Kalem
(17 miles [27.4 km] to the northeast)
- Jump to our Gazetteer entry for Kalem
- Kalem is located in Scott County
- Raworth
(18 miles [29 km] to the northeast)
- Jump to our Gazetteer entry for Raworth
- Raworth is located in Scott County
- Continue List (28 more) ...
- Otho
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Otho have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Otho
- Otho is located in Scott County
- Branch
(20 miles [32.2 km] to the north)
- Jump to our Gazetteer entry for Branch
- Branch is located in Scott County
- Norris
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Norris have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Norris
- Norris is located in Scott County
- Forest
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Forest have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forest
- Forest is located in Scott County
- Population from the 2020 Census: 5,483 people
- Jump to TripAdvisor's Tourism page for Forest <4>
- Sun
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Sun have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sun
- Sun is located in Scott County
- Fikestown
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Fikestown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fikestown
- Fikestown is located in Scott County
- Forkville
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Forkville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forkville
- Forkville is located in Scott County
- Ball Hill
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Ball Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ball Hill
- Ball Hill is located in Scott County
- Buckleytown
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Buckleytown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckleytown
- Buckleytown is located in Scott County
- Beach
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Beach have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beach
- Beach is located in Scott County
- Clifton
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Clifton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clifton
- Clifton is located in Scott County
- Donohoe
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Donohoe have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Donohoe
- Donohoe is located in Scott County
- Hillsboro
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Hillsboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillsboro
- Hillsboro is located in Scott County
- Singleton Settlement
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Singleton Settlement have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Singleton Settlement
- Singleton Settlement is located in Scott County
- Dennis Settlement
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Dennis Settlement have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dennis Settlement
- Dennis Settlement is located in Scott County
- East Hillsboro
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for East Hillsboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Hillsboro
- East Hillsboro is located in Scott County
- Little Italy
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Little Italy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Italy
- Little Italy is located in Scott County
- Muskegon
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Muskegon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Muskegon
- Muskegon is located in Scott County
- Usrytown
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Usrytown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Usrytown
- Usrytown is located in Scott County
- Lillian
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Lillian have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lillian
- Lillian is located in Scott County
- Gum Spring
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Gum Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gum Spring
- Gum Spring is located in Scott County
- Lake
(27 miles [43.5 km] to the northeast)
- Harperville
(28 miles [45.1 km] to the northeast)
- Jump to our Gazetteer entry for Harperville
- Harperville is located in Scott County
- Wolf
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Wolf have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wolf
- Wolf is located in Scott County
- Contrell
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Contrell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Contrell
- Contrell is located in Scott County
- Ludlow
(30 miles [48.3 km] to the north)
- Jump to our Gazetteer entry for Ludlow
- Ludlow is located in Scott County
- Midway
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Midway have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midway
- Midway is located in Scott County
- Steele
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Steele have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Steele
- Steele is located in Scott County
- Simpson County
- County Seat for Simpson: Mendenhall
- Genealogy Websites ...
- Nearest Communities to Daniel ...
- These communities are listed by their distance from Daniel.
- Upton
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Upton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Upton
- Upton is located in Simpson County
- Everett
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Everett have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Everett
- Everett is located in Simpson County
- Martinville
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Martinville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Martinville
- Martinville is located in Simpson County
- Fayettehill
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Fayettehill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fayettehill
- Fayettehill is located in Simpson County
- Zion Hill
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Zion Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zion Hill
- Zion Hill is located in Simpson County
- D'Lo
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for D'Lo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for D'Lo
- D'Lo is located in Simpson County
- Population from the 2020 Census: 442 people
- Mendenhall
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Mendenhall have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mendenhall
- Mendenhall is located in Simpson County
- Population from the 2020 Census: 2,393 people
- Jump to TripAdvisor's Tourism page for Mendenhall <4>
- Weathersby
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Weathersby have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Weathersby
- Weathersby is located in Simpson County
- Gum Springs
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Gum Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gum Springs
- Gum Springs is located in Simpson County
- Maddox
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Maddox have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maddox
- Maddox is located in Simpson County
- Sanatorium
(16 miles [25.7 km] to the south)
- Jump to our Gazetteer entry for Sanatorium
- Sanatorium is located in Simpson County
- Braxton
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Braxton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Braxton
- Braxton is located in Simpson County
- Population from the 2020 Census: 179 people
- Continue List (20 more) ...
- Pine Lake
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Pine Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Lake
- Pine Lake is located in Simpson County
- Magee
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Magee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Magee
- Magee is located in Simpson County
- Population from the 2020 Census: 4,094 people
- Jump to TripAdvisor's Tourism page for Magee <4>
- Merit
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Merit have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Merit
- Merit is located in Simpson County
- Cyclone
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Cyclone have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cyclone
- Cyclone is located in Simpson County
- Coats
(19 miles [30.6 km] to the south)
- Jump to our Gazetteer entry for Coats
- Coats is located in Simpson County
- Touchstone
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Touchstone have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Touchstone
- Touchstone is located in Simpson County
- Rexford
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Rexford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rexford
- Rexford is located in Simpson County
- Merry Hell
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Merry Hell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Merry Hell
- Merry Hell is located in Simpson County
- Pinola
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Pinola have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinola
- Pinola is located in Simpson County
- Westville
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Westville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westville
- Westville is located in Simpson County
- Gama
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Gama have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gama
- Gama is located in Simpson County
- Saratoga
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Saratoga have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saratoga
- Saratoga is located in Simpson County
- Harrisville
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Harrisville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harrisville
- Harrisville is located in Simpson County
- Boggan
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Boggan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boggan
- Boggan is located in Simpson County
- Jaynesville
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Jaynesville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jaynesville
- Jaynesville is located in Simpson County
- Bush
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Bush have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bush
- Bush is located in Simpson County
- Shivers
(27 miles [43.5 km] to the southwest)
- Jump to our Gazetteer entry for Shivers
- Shivers is located in Simpson County
- Union
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Union have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union
- Union is located in Simpson County
- Pearl
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Pearl have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pearl
- Pearl is located in Simpson County
- Bridgeport
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Bridgeport have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bridgeport
- Bridgeport is located in Simpson County
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Daniel) to Point B.Our distance measurements begin at a specific point in Daniel. The point we use is located at these GPS coordinates - Latitude: 32.1285, Longitude: -89.7209 |
<2> | Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.
We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.
Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |