RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Minnesota >> Otter Tail County >> Hillview >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Minnesota

The Commemorative Quarter for Minnesota





TripAdvisor Links

Introduction ...

When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

While we are unaware of a TripAdvisor Tourism page that is specific to Hillview, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Hillview - within 30 miles [48.3 km]<1>.

Unless noted otherwise, the following communities are located in Otter Tail County.

Our list sorts the communities in alphabetical order. There are 20 communities listed:

  • Bertha
    (30 miles [48.3 km] to the south)
    • Note: The GPS coordinates that we are using for Bertha have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bertha
    • Bertha is located in Todd County
    • Population from the 2020 Census: 481 people
    • Jump to TripAdvisor's Tourism page for Bertha <3>
  • Dent
    (23 miles [37 km] to the west)
    • Note: The GPS coordinates that we are using for Dent have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dent
    • Dent is located in Otter Tail County
    • Population from the 2020 Census: 185 people
    • Jump to TripAdvisor's Tourism page for Dent <3>
  • Detroit Lakes
    (28 miles [45.1 km] to the west)
    • Note: The GPS coordinates that we are using for Detroit Lakes have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Detroit Lakes
    • Detroit Lakes is located in Becker County
    • Population from the 2020 Census: 9,255 people
    • Jump to TripAdvisor's Tourism page for Detroit Lakes <3>
  • Frazee
    (21 miles [33.8 km] to the west)
    • Note: The GPS coordinates that we are using for Frazee have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Frazee
    • Frazee is located in Becker County
    • Population from the 2020 Census: 1,381 people
    • Jump to TripAdvisor's Tourism page for Frazee <3>
  • Henning
    (26 miles [41.8 km] to the south)
    • Note: The GPS coordinates that we are using for Henning have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Henning
    • Henning is located in Otter Tail County
    • Population from the 2020 Census: 806 people
    • Jump to TripAdvisor's Tourism page for Henning <3>
  • Menahga
    (8 miles [12.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Menahga have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Menahga
    • Menahga is located in Wadena County
    • Population from the 2020 Census: 1,307 people
    • Jump to TripAdvisor's Tourism page for Menahga <3>
  • Nevis
    (27 miles [43.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Nevis have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Nevis
    • Nevis is located in Hubbard County
    • Population from the 2020 Census: 416 people
    • Jump to TripAdvisor's Tourism page for Nevis <3>
  • New York Mills
    (12 miles [19.3 km] to the southwest)
  • Nimrod
    (18 miles [29 km] to the east)
  • Osage
    (16 miles [25.7 km] to the north)
    • Note: The GPS coordinates that we are using for Osage have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Osage
    • Osage is located in Becker County
    • Jump to TripAdvisor's Tourism page for Osage <3>
  • Ottertail
    (22 miles [35.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Ottertail have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ottertail
    • Ottertail is located in Otter Tail County
    • Population from the 2020 Census: 660 people
    • Jump to TripAdvisor's Tourism page for Ottertail <3>
  • Park Rapids
    (19 miles [30.6 km] to the northeast)
  • Perham
    (15 miles [24.1 km] to the west)
    • Note: The GPS coordinates that we are using for Perham have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Perham
    • Perham is located in Otter Tail County
    • Population from the 2020 Census: 3,638 people
    • Jump to TripAdvisor's Tourism page for Perham <3>
  • Ponsford
    (20 miles [32.2 km] to the north)
    • Note: The GPS coordinates that we are using for Ponsford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ponsford
    • Ponsford is located in Becker County
    • Jump to TripAdvisor's Tourism page for Ponsford <3>
  • Richville
    (21 miles [33.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Richville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Richville
    • Richville is located in Otter Tail County
    • Population from the 2020 Census: 98 people
    • Jump to TripAdvisor's Tourism page for Richville <3>
  • Rochert
    (23 miles [37 km] to the northwest)
    • Note: The GPS coordinates that we are using for Rochert have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rochert
    • Rochert is located in Becker County
    • Jump to TripAdvisor's Tourism page for Rochert <3>
  • Sebeka
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Sebeka have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sebeka
    • Sebeka is located in Wadena County
    • Population from the 2020 Census: 668 people
    • Jump to TripAdvisor's Tourism page for Sebeka <3>
  • Vergas
    (25 miles [40.2 km] to the west)
    • Note: The GPS coordinates that we are using for Vergas have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vergas
    • Vergas is located in Otter Tail County
    • Population from the 2020 Census: 354 people
    • Jump to TripAdvisor's Tourism page for Vergas <3>
  • Verndale
    (22 miles [35.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Verndale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Verndale
    • Verndale is located in Wadena County
    • Population from the 2020 Census: 576 people
    • Jump to TripAdvisor's Tourism page for Verndale <3>
  • Wadena
    (17 miles [27.4 km] to the south)
    • Note: The GPS coordinates that we are using for Wadena have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wadena
    • Wadena is located in Otter Tail County
    • Population from the 2020 Census: 4,121 people
    • Jump to TripAdvisor's Tourism page for Wadena <3>

Unfortunately, we don't know of an official website for Hillview. If you can help, please contact us through our Feedback Page.

The official website for Otter Tail County: www.co.otter-tail.mn.us/

The official website for State of Minnesota: https://mn.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Hillview) to Point B.Our distance measurements begin at a specific point in Hillview. The point we use is located at these GPS coordinates - Latitude: 46.6802, Longitude: -95.2578       In this case, the coordinates for Hillview have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024