Census Data for Hillview

As far as we can tell, Hillview has not been included in past Census counts, so there is no population information for this community.

While we don't have census information for Hillview, you might be interested in some nearby communities where we do:

• Menahga
  (8 miles [12.9 km] to the northeast)
  • Menahga is located in Wadena County
  • Jump to our Gazetteer entry for Menahga
  • Jump to TripAdvisor's Tourism page for Menahga <1>
• Sebeka
  (8 miles [12.9 km] to the southeast)
  • Sebeka is located in Wadena County
  • Jump to our Gazetteer entry for Sebeka
  • Jump to TripAdvisor's Tourism page for Sebeka <1>
• Wolf Lake
  (9 miles [14.5 km] to the northwest)
  • Wolf Lake is located in Becker County
  • Jump to our Gazetteer entry for Wolf Lake
• New York Mills
  (12 miles [19.3 km] to the southwest)
  • New York Mills is located in Otter Tail County
  • Jump to our Gazetteer entry for New York Mills
  • Jump to TripAdvisor's Tourism page for New York Mills <1>
• Bluffton
  (14 miles [22.5 km] to the south)
  • Bluffton is located in Otter Tail County
  • Jump to our Gazetteer entry for Bluffton
• Perham
  (15 miles [24.1 km] to the west)
  • Perham is located in Otter Tail County
  • Jump to our Gazetteer entry for Perham
  • Jump to TripAdvisor's Tourism page for Perham <1>
• Wadena
  (17 miles [27.4 km] to the south)
  • Wadena is located in Otter Tail County
  • Jump to our Gazetteer entry for Wadena
  • Jump to TripAdvisor's Tourism page for Wadena <1>
• Nimrod
  (18 miles [29 km] to the east)
  • Nimrod is located in Wadena County
  • Jump to our Gazetteer entry for Nimrod
  • Jump to TripAdvisor's Tourism page for Nimrod <1>
• Park Rapids
  (19 miles [30.6 km] to the northeast)
  • Park Rapids is located in Hubbard County
  • Jump to our Gazetteer entry for Park Rapids
  • Jump to TripAdvisor's Tourism page for Park Rapids <1>
• Deer Creek
  (20 miles [32.2 km] to the south)
  • Deer Creek is located in Otter Tail County
  • Jump to our Gazetteer entry for Deer Creek
• Frazee
  (21 miles [33.8 km] to the west)
  • Frazee is located in Becker County
  • Jump to our Gazetteer entry for Frazee
  • Jump to TripAdvisor's Tourism page for Frazee <1>
• Richville
  (21 miles [33.8 km] to the southwest)
  • Richville is located in Otter Tail County
  • Jump to our Gazetteer entry for Richville
  • Jump to TripAdvisor's Tourism page for Richville <1>
• Continue List   (55 more) ...
  • Ottertail
    (22 miles [35.4 km] to the southwest)
    • Ottertail is located in Otter Tail County
    • Jump to our Gazetteer entry for Ottertail
    • Jump to TripAdvisor's Tourism page for Ottertail <1>
  • Verndale
    (22 miles [35.4 km] to the southeast)
    • Verndale is located in Wadena County
    • Jump to our Gazetteer entry for Verndale
    • Jump to TripAdvisor's Tourism page for Verndale <1>
  • Dent
    (23 miles [37 km] to the west)
    • Dent is located in Otter Tail County
    • Jump to our Gazetteer entry for Dent
    • Jump to TripAdvisor's Tourism page for Dent <1>

Otter Tail County ...

Hillview is located in Otter Tail County<2>.

For more information, please visit our Census Page for Otter Tail County.

Miscellaneous Information for Hillview ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Otter Tail County or the community of Hillview:

• The GNIS Codes ...
  • The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Hillview:
  • GNIS ID for Hillview: 645026
  • GNIS ID for Otter Tail County: 659501
  • GNIS ID for State of Minnesota: 662849

• The FIPS Codes ...
  • An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
  • State Code: 27 (Minnesota)
  • County Code: 111 (Otter Tail County)
  • Place Code: 29276 (Hillview)
  • State & County Code: 27/111 (Minnesota / Otter Tail County)
  • State & Place Code: 27/29276 (Minnesota / Hillview)

• Misc. Census Codes ...
  • Hillview is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).

For more information about the various Federal identification codes, please visit our Misc Page for Hillview.