RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Georgia >> Murray County >> Hasslers Mill >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Georgia

The Commemorative Quarter for Georgia





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Hasslers Mill (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Hasslers Mill. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Name Variations for Hasslers Mill ...

When searching records, keep in mind that names and their spelling can change over time. Our sources include documents like maps, railroad schedules, Travel, Express and Shipping Guides. Many of these documents date from the 1800's and it's common to find spelling differences.

Although we can't give a definitive list, hopefully the following will give you a feel for the variations that might have occurred.

  • A typical abbreviation for Hasslers Mill: Hasslers Ml. (or less commonly used: Hasslers Mll.)
  • While the name of this community is Hasslers Mill, be aware that it's the common practice of mapmakers to remove the apostrophe from possessive names<1>. So Hasslers Mill may originally have been Hassler's Mill.

    Sometimes the trailing 's' might be dropped altogether, in which case Hasslers Mill might be written as Hassler Mill.

If you have information about these names (such as the reason for the change, date of change, the origin of the name), please Contact Us.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Hasslers Mill is located in Murray County.

To see how the shape of Georgia's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Murray County: Fannin, Gilmer, Gordon, Whitfield, Bradley (TN) & Polk (TN).

Below are the counties that are near Hasslers Mill. For each of these counties, we show a sample of those communities that are closest to Hasslers Mill:

  • Murray County     (The home county of Hasslers Mill)
    • The following are listed by their distance from Hasslers Mill, with the one closest to Hasslers Mill listed first.
    • Eton
      (3 miles [4.8 km] to the west)
    • Crandall
      (4 miles [6.4 km] to the northwest)
    • Chatsworth
      (5 miles [8 km] to the southwest)
    • Sumac
      (7 miles [11.3 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Sumac. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Sumac
      • Sumac is located in Murray County
    • Cisco
      (9 miles [14.5 km] to the north)
    • Temple Grove
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Temple Grove have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Temple Grove
      • Temple Grove is located in Murray County
      • Estimated population in 2019: 4,795 people
    • Gregory
      (10 miles [16.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Gregory have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gregory
      • Gregory is located in Murray County
      • Population from the 2010 Census: 7,432 people
    • Ball Ground
      (11 miles [17.7 km] to the south)
      • Jump to our Gazetteer entry for Ball Ground
      • Ball Ground is located in Murray County
    • Wells ‑ Historic
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Wells have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wells
      • Wells is located in Murray County
    • Tennga
      (12 miles [19.3 km] to the north)
    • Carters
      (14 miles [22.5 km] to the south)
      • Jump to our Gazetteer entry for Carters
      • Carters is located in Murray County
  • Bartow County
    • The following are listed by their distance from Hasslers Mill, with the one closest to Hasslers Mill listed first.
    • Bolivar
      (29 miles [46.7 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Bolivar. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Bolivar
      • Bolivar is located in Bartow County
    • Funkhouser
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Funkhouser have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Funkhouser
      • Funkhouser is located in Bartow County
      • Estimated population in 2019: 450 people
  • Catoosa County
    • The following are listed by their distance from Hasslers Mill, with the one closest to Hasslers Mill listed first.
    • Mount Vernon
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Mount Vernon have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Vernon
      • Mount Vernon is located in Catoosa County
      • Estimated population in 2019: 2,371 people
    • Catoosa Springs
      (21 miles [33.8 km] to the west)
      • Jump to our Gazetteer entry for Catoosa Springs
      • Catoosa Springs is located in Catoosa County
    • Ringgold
      (24 miles [38.6 km] to the west)
    • Poplar Springs
      (25 miles [40.2 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Poplar Springs. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Poplar Springs
      • Poplar Springs is located in Catoosa County
    • Graysville
      (27 miles [43.5 km] to the northwest)
    • Ellie Spring
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Ellie Spring have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ellie Spring
      • Ellie Spring is located in Catoosa County
      • Estimated population in 2019: 1,714 people
    • Indian Springs
      (28 miles [45.1 km] to the west)
      • Note: The GPS coordinates that we are using for Indian Springs have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Indian Springs
      • Indian Springs is located in Catoosa County
    • Boynton
      (29 miles [46.7 km] to the west)
      • Jump to our Gazetteer entry for Boynton
      • Boynton is located in Catoosa County
    • Blue Spring
      (30 miles [48.3 km] to the west)
      • Jump to our Gazetteer entry for Blue Spring
      • Blue Spring is located in Catoosa County
    • Dafron
      (30 miles [48.3 km] to the west)
      • Note: The GPS coordinates that we are using for Dafron have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dafron
      • Dafron is located in Catoosa County
      • Estimated population in 2019: 7,294 people
  • Cherokee County
    • Salacoa
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Salacoa have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Salacoa
      • Salacoa is located in Cherokee County
      • Estimated population in 2019: 344 people
  • Fannin County
    • The following are listed by their distance from Hasslers Mill, with the one closest to Hasslers Mill listed first.
    • Chestnut Gap
      (16 miles [25.7 km] to the east)
      • Jump to our Gazetteer entry for Chestnut Gap
      • Chestnut Gap is located in Fannin County
    • Epworth
      (19 miles [30.6 km] to the northeast)
    • Pierceville
      (19 miles [30.6 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Pierceville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Pierceville
      • Pierceville is located in Fannin County
    • Fry
      (20 miles [32.2 km] to the northeast)
      • Jump to our Gazetteer entry for Fry
      • Fry is located in Fannin County
    • Blue Ridge
      (21 miles [33.8 km] to the east)
    • McCaysville
      (21 miles [33.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for McCaysville have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McCaysville
      • McCaysville is located in Fannin County
      • Population from the 2020 Census: 1,217 people
      • Jump to TripAdvisor's Tourism page for McCaysville <2>
    • Greens Mill
      (22 miles [35.4 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Greens Mill. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Greens Mill
      • Greens Mill is located in Fannin County
    • Pantertown
      (23 miles [37 km] to the northeast)
      • Jump to our Gazetteer entry for Pantertown
      • Pantertown is located in Fannin County
      • Population from the 2010 Census: 9,749 people
    • Mineral Bluff
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Mineral Bluff have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mineral Bluff
      • Mineral Bluff is located in Fannin County
      • Jump to TripAdvisor's Tourism page for Mineral Bluff <2>
    • Morganton
      (25 miles [40.2 km] to the east)
    • Newport
      (26 miles [41.8 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Newport. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Newport
      • Newport is located in Fannin County
    • Cutcane
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Cutcane have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cutcane
      • Cutcane is located in Fannin County
      • Estimated population in 2019: 3,417 people
    • Craytonia
      (30 miles [48.3 km] to the east)
      • Jump to our Gazetteer entry for Craytonia
      • Craytonia is located in Fannin County
  • Gilmer County
    • The following are listed by their distance from Hasslers Mill, with the one closest to Hasslers Mill listed first.
    • Tails Creek
      (9 miles [14.5 km] to the southeast)
      • Jump to our Gazetteer entry for Tails Creek
      • Tails Creek is located in Gilmer County
      • Population from the 2010 Census: 1,248 people
    • Santaluca
      (14 miles [22.5 km] to the east)
      • Note: The GPS coordinates that we are using for Santaluca have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Santaluca
      • Santaluca is located in Gilmer County
    • Ellijay
      (14 miles [22.5 km] to the southeast)
    • East Ellijay
      (15 miles [24.1 km] to the southeast)
    • Northcutt
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Northcutt have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Northcutt
      • Northcutt is located in Gilmer County
      • Population from the 2010 Census: 16,698 people
    • White Path
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for White Path have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for White Path
      • White Path is located in Gilmer County
      • Estimated population in 2019: 342 people
    • Cherry Log
      (17 miles [27.4 km] to the east)
    • Yukon
      (18 miles [29 km] to the southeast)
      • Jump to our Gazetteer entry for Yukon
      • Yukon is located in Gilmer County
    • Whitestone
      (20 miles [32.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Whitestone have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Whitestone
      • Whitestone is located in Gilmer County
    • Rolston
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Rolston have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rolston
      • Rolston is located in Gilmer County
      • Estimated population in 2019: 36,716 people
    • Tickanetley
      (25 miles [40.2 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Tickanetley. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Tickanetley
      • Tickanetley is located in Gilmer County
  • Gordon County
    • The following are listed by their distance from Hasslers Mill, with the one closest to Hasslers Mill listed first.
    • Buff ‑ Historic
      (16 miles [25.7 km] to the south)
      • Note: The GPS coordinates that we are using for Buff have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Buff
      • Buff is located in Gordon County
      • Estimated population in 2019: 15,522 people
    • Oakman
      (16 miles [25.7 km] to the south)
      • Note: The GPS coordinates that we are using for Oakman have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oakman
      • Oakman is located in Gordon County
      • Jump to TripAdvisor's Tourism page for Oakman <2>
    • Soapstick
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Soapstick have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Soapstick
      • Soapstick is located in Gordon County
      • Estimated population in 2019: 4,544 people
    • Ranger
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Ranger have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ranger
      • Ranger is located in Gordon County
      • Population from the 2020 Census: 137 people
      • Jump to TripAdvisor's Tourism page for Ranger <2>
    • Resaca Ferry
      (21 miles [33.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Resaca Ferry have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Resaca Ferry
      • Resaca Ferry is located in Gordon County
      • Estimated population in 2019: 803 people
    • Resaca
      (21 miles [33.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Resaca have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Resaca
      • Resaca is located in Gordon County
      • Population from the 2020 Census: 1,089 people
      • Jump to TripAdvisor's Tourism page for Resaca <2>
    • Igo ‑ Historic
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Igo have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Igo
      • Igo is located in Gordon County
      • Estimated population in 2019: 359 people
    • Damascus
      (22 miles [35.4 km] to the southwest)
      • Jump to our Gazetteer entry for Damascus
      • Damascus is located in Gordon County
    • Hill City
      (22 miles [35.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Hill City have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hill City
      • Hill City is located in Gordon County
    • New Town
      (22 miles [35.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Town
      • New Town is located in Gordon County
    • Fairmount
      (25 miles [40.2 km] to the south)
    • Calhoun Ferry
      (25 miles [40.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Calhoun Ferry have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Calhoun Ferry
      • Calhoun Ferry is located in Gordon County
      • Estimated population in 2019: 17,271 people
    • Calhoun
      (25 miles [40.2 km] to the southwest)
  • Pickens County
    • The following are listed by their distance from Hasslers Mill, with the one closest to Hasslers Mill listed first.
    • Hinton
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Hinton have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hinton
      • Hinton is located in Pickens County
      • Estimated population in 2019: 4,223 people
    • Talking Rock
      (23 miles [37 km] to the southeast)
    • Jerusalem
      (26 miles [41.8 km] to the south)
      • Jump to our Gazetteer entry for Jerusalem
      • Jerusalem is located in Pickens County
    • Talmadge
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Talmadge have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Talmadge
      • Talmadge is located in Pickens County
      • Estimated population in 2019: 257 people
    • Jasper
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Jasper have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jasper
      • Jasper is located in Pickens County
      • Population from the 2020 Census: 4,037 people
      • Jump to TripAdvisor's Tourism page for Jasper <2>
  • Walker County
    • The following are listed by their distance from Hasslers Mill, with the one closest to Hasslers Mill listed first.
    • Furnace ‑ Historic
      (25 miles [40.2 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Furnace. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Furnace
      • Furnace is located in Walker County
    • Villanow
      (25 miles [40.2 km] to the west)
      • Jump to our Gazetteer entry for Villanow
      • Villanow is located in Walker County
      • Estimated population in 2019: 16,058 people
    • Rock Spring
      (30 miles [48.3 km] to the west)
  • Whitfield County
    • The following are listed by their distance from Hasslers Mill, with the one closest to Hasslers Mill listed first.
    • Ruralvale
      (10 miles [16.1 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Ruralvale. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Ruralvale
      • Ruralvale is located in Whitfield County
    • Union Point
      (13 miles [20.9 km] to the west)
      • Jump to our Gazetteer entry for Union Point
      • Union Point is located in Whitfield County
      • Population from the 2010 Census: 1,845 people
    • Plainview
      (14 miles [22.5 km] to the west)
      • Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Plainview
      • Plainview is located in Whitfield County
      • Estimated population in 2019: 318 people
    • Dalton
      (15 miles [24.1 km] to the west)
      • Jump to our Gazetteer entry for Dalton
      • Dalton is located in Whitfield County
      • Population from the 2020 Census: 33,368 people
      • Jump to TripAdvisor's Tourism page for Dalton <2>
    • Waring
      (15 miles [24.1 km] to the west)
      • Jump to our Gazetteer entry for Waring
      • Waring is located in Whitfield County
    • Crown Mill Village
      (16 miles [25.7 km] to the west)
      • Note: The GPS coordinates that we are using for Crown Mill Village have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Crown Mill Village
      • Crown Mill Village is located in Whitfield County
    • Varnell
      (16 miles [25.7 km] to the west)
    • Cohutta
      (17 miles [27.4 km] to the northwest)
    • Parrett Crossing
      (18 miles [29 km] to the northwest)
      • Note: The GPS coordinates that we are using for Parrett Crossing have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Parrett Crossing
      • Parrett Crossing is located in Whitfield County
      • Estimated population in 2019: 136 people
    • Red Clay
      (18 miles [29 km] to the northwest)
      • Jump to our Gazetteer entry for Red Clay
      • Red Clay is located in Whitfield County
    • Rocky Face
      (18 miles [29 km] to the west)
    • Crow ‑ Historic
      (20 miles [32.2 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Crow. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Crow
      • Crow is located in Whitfield County
    • Tunnel Hill
      (20 miles [32.2 km] to the west)
  • Cherokee County (NC)
    • The following are listed by their distance from Hasslers Mill, with the one closest to Hasslers Mill listed first.
    • Burger Town
      (27 miles [43.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Burger Town have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Burger Town
      • Burger Town is located in Cherokee County (NC)
    • Hothouse
      (29 miles [46.7 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Hothouse. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Hothouse
      • Hothouse is located in Cherokee County (NC)
  • Bradley County (TN)
    • The following are listed by their distance from Hasslers Mill, with the one closest to Hasslers Mill listed first.
    • Wildwood Lake
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Wildwood Lake have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wildwood Lake
      • Wildwood Lake is located in Bradley County (TN)
      • Population from the 2010 Census: 3,124 people
    • South Cleveland
      (24 miles [38.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for South Cleveland have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for South Cleveland
      • South Cleveland is located in Bradley County (TN)
      • Population from the 2010 Census: 6,912 people
    • East Cleveland
      (25 miles [40.2 km] to the north)
      • Note: The GPS coordinates that we are using for East Cleveland have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Cleveland
      • East Cleveland is located in Bradley County (TN)
      • Population from the 2010 Census: 1,608 people
    • Cleveland
      (26 miles [41.8 km] to the northwest)
    • McDonald
      (26 miles [41.8 km] to the northwest)
    • Mineral Park
      (26 miles [41.8 km] to the northwest)
      • Jump to our Gazetteer entry for Mineral Park
      • Mineral Park is located in Bradley County (TN)
    • Bellefounte
      (30 miles [48.3 km] to the north)
      • Jump to our Gazetteer entry for Bellefounte
      • Bellefounte is located in Bradley County (TN)
    • Countryside Village
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Countryside Village have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Countryside Village
      • Countryside Village is located in Bradley County (TN)
    • Bent Tree Acres
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Bent Tree Acres have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bent Tree Acres
      • Bent Tree Acres is located in Bradley County (TN)
      • Estimated population in 2014: 1,309 people
  • Hamilton County (TN)
    • The following are listed by their distance from Hasslers Mill, with the one closest to Hasslers Mill listed first.
    • Howardville
      (21 miles [33.8 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Howardville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Howardville
      • Howardville is located in Hamilton County (TN)
    • Apison
      (23 miles [37 km] to the northwest)
      • Jump to our Gazetteer entry for Apison
      • Apison is located in Hamilton County (TN)
      • Population from the 2010 Census: 2,469 people
    • Collegedale
      (25 miles [40.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Collegedale have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Collegedale
      • Collegedale is located in Hamilton County (TN)
      • Population from the 2020 Census: 11,400 people
      • Jump to TripAdvisor's Tourism page for Collegedale <2>
    • Auburn Hills
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Auburn Hills have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Auburn Hills
      • Auburn Hills is located in Hamilton County (TN)
      • Estimated population in 2014: 929 people
    • Ooltewah
      (27 miles [43.5 km] to the northwest)
    • Ryall Springs
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Ryall Springs have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ryall Springs
      • Ryall Springs is located in Hamilton County (TN)
      • Estimated population in 2014: 1,166 people
    • East Brainerd
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for East Brainerd have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Brainerd
      • East Brainerd is located in Hamilton County (TN)
  • Polk County (TN)
    • The following are listed by their distance from Hasslers Mill, with the one closest to Hasslers Mill listed first.
    • Ball Play
      (15 miles [24.1 km] to the north)
      • Jump to our Gazetteer entry for Ball Play
      • Ball Play is located in Polk County (TN)
    • Oldfort
      (17 miles [27.4 km] to the north)
      • Jump to our Gazetteer entry for Oldfort
      • Oldfort is located in Polk County (TN)
    • Ocoee
      (21 miles [33.8 km] to the north)
    • Copperhill
      (21 miles [33.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Copperhill have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Copperhill
      • Copperhill is located in Polk County (TN)
      • Population from the 2020 Census: 316 people
      • Jump to TripAdvisor's Tourism page for Copperhill <2>
    • Ducktown
      (23 miles [37 km] to the northeast)
    • Archville
      (24 miles [38.6 km] to the northeast)
      • Jump to our Gazetteer entry for Archville
      • Archville is located in Polk County (TN)
    • Chanceytown
      (24 miles [38.6 km] to the northeast)
      • Jump to our Gazetteer entry for Chanceytown
      • Chanceytown is located in Polk County (TN)
    • Benton
      (25 miles [40.2 km] to the north)
      • Jump to our Gazetteer entry for Benton
      • Benton is located in Polk County (TN)
      • Population from the 2020 Census: 1,247 people
      • Jump to TripAdvisor's Tourism page for Benton <2>
    • Belltown Hill
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Belltown Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belltown Hill
      • Belltown Hill is located in Polk County (TN)
      • Estimated population in 2014: 2,457 people
    • Chestuee
      (30 miles [48.3 km] to the north)
      • Jump to our Gazetteer entry for Chestuee
      • Chestuee is located in Polk County (TN)

For an expanded list of the communities that are closest to Hasslers Mill, see our County-by-County Page for Hasslers Mill.

Cemeteries Near Hasslers Mill ...

Below are cemeteries that are in the vicinity of Hasslers Mill.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Hasslers Mill covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Hasslers Mill, with the one closest to Hasslers Mill listed first.

  • Ernest Cemetery
    (Less than 2 miles to the north)
    • Jump to our Gazetteer entry for the Ernest Cemetery
    • Note: The GPS coordinates that we are using for the Ernest Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
  • Chatsworth Heights Cemetery
    (4 miles [6.4 km] to the west)
    • Jump to our Gazetteer entry for the Chatsworth Heights Cemetery
    • Note: The GPS coordinates that we are using for the Chatsworth Heights Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
  • Harrison Chapel Cemetery
    (4 miles [6.4 km] to the southwest)
    • Jump to our Gazetteer entry for the Harrison Chapel Cemetery
    • Note: The GPS coordinates that we are using for the Harrison Chapel Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
  • Murray Memorial Gardens Cemetery
    (5 miles [8 km] to the west)
    • Jump to our Gazetteer entry for the Murray Memorial Gardens Cemetery
    • Note: The GPS coordinates that we are using for the Murray Memorial Gardens Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
  • Amazing Grace Baptist Church Cemetery
    (5 miles [8 km] to the northwest)
  • Williams Cemetery
    (6 miles [9.7 km] to the west)
    • Jump to our Gazetteer entry for the Williams Cemetery
    • Note: The GPS coordinates that we are using for the Williams Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
  • Mt. Zion Cemetery
    (6 miles [9.7 km] to the southwest)
    • Jump to our Gazetteer entry for the Mt. Zion Cemetery
    • Note: The GPS coordinates that we are using for the Mt. Zion Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
  • Pleasant Hill Baptist Church Cemetery
    (6 miles [9.7 km] to the southeast)
    • Jump to our Gazetteer entry for the Pleasant Hill Baptist Church Cemetery
    • Note: The GPS coordinates that we are using for the Pleasant Hill Baptist Church Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
  • Harris Cemetery
    (6 miles [9.7 km] to the northwest)
    • Jump to our Gazetteer entry for the Harris Cemetery
    • Note: The GPS coordinates that we are using for the Harris Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
  • Nine Mile UMC Cemetery
    (7 miles [11.3 km] to the southeast)
    • Jump to our Gazetteer entry for the Nine Mile UMC Cemetery
    • Note: The GPS coordinates that we are using for the Nine Mile UMC Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
  • Gates Chapel UMC Cemetery
    (7 miles [11.3 km] to the east)
    • Jump to our Gazetteer entry for the Gates Chapel UMC Cemetery
    • Note: The GPS coordinates that we are using for the Gates Chapel UMC Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
  • Sumach Cumberland Presbyterian Church Cemetery
    (7 miles [11.3 km] to the northwest)
    • Jump to our Gazetteer entry for the Sumach Cumberland Presbyterian Church Cemetery
    • To give a relative sense of its location, the Sumach Cumberland Presbyterian Church Cemetery is a large cemetery that is located 4 miles [6.4 km]<6> to the southeast of Eton.
    • The Sumach Cumberland Presbyterian Church Cemetery has also been known as:
    • Sumach Cumberland Presbyterian Cemetery
    • Jump to Find-A-Grave: FG ID #1252577 <5>
  • Continue List   (402 more) ...
    • Ramsey Cemetery
      (8 miles [12.9 km] to the south)
      • Jump to our Gazetteer entry for the Ramsey Cemetery
      • Note: The GPS coordinates that we are using for the Ramsey Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Tails Creek Baptist Church Cemetery
      (8 miles [12.9 km] to the southeast)
      • Jump to our Gazetteer entry for the Tails Creek Baptist Church Cemetery
      • Note: The GPS coordinates that we are using for the Tails Creek Baptist Church Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Mountaintown Baptist Church Cemetery
      (8 miles [12.9 km] to the southeast)
      • Jump to our Gazetteer entry for the Mountaintown Baptist Church Cemetery
      • Note: The GPS coordinates that we are using for the Mountaintown Baptist Church Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<7>

The Rand McNally Atlas shows that in 1895, Hasslers Mill had a post office and no railroad service.

These communities are listed based on their distance from Hasslers Mill, with the one closest to Hasslers Mill listed first.

  • Fort Mountain ‑ Historic
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Fort Mountain have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fort Mountain
    • Fort Mountain is located in Murray County
  • Dennis
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Dennis have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dennis
    • Dennis is located in Murray County
  • Sumac
    (7 miles [11.3 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Sumac. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Sumac
    • Sumac is located in Murray County
  • Spring Place
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Spring Place have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spring Place
    • Spring Place is located in Murray County
  • Mountaintown
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Mountaintown have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mountaintown
    • Mountaintown is located in Gilmer County
  • Cisco
    (9 miles [14.5 km] to the north)
  • Tails Creek
    (9 miles [14.5 km] to the southeast)
    • Jump to our Gazetteer entry for Tails Creek
    • Tails Creek is located in Gilmer County
    • Population from the 2010 Census: 1,248 people
  • Norton
    (9 miles [14.5 km] to the west)
    • Note: The GPS coordinates that we are using for Norton have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Norton
    • Norton is located in Whitfield County
  • Doogan
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for Doogan have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Doogan
    • Doogan is located in Murray County
  • Ruralvale
    (10 miles [16.1 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Ruralvale. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Ruralvale
    • Ruralvale is located in Whitfield County
  • Dawnville
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Dawnville have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dawnville
    • Dawnville is located in Whitfield County
  • Cedar Ridge
    (11 miles [17.7 km] to the west)
    • Note: The GPS coordinates that we are using for Cedar Ridge have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cedar Ridge
    • Cedar Ridge is located in Whitfield County
  • Continue List   (16 more) ...
    • Wells ‑ Historic
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Wells have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wells
      • Wells is located in Murray County
    • Beaverdale
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Beaverdale have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beaverdale
      • Beaverdale is located in Whitfield County
    • Flat Branch
      (12 miles [19.3 km] to the east)
      • Note: The GPS coordinates that we are using for Flat Branch have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Flat Branch
      • Flat Branch is located in Gilmer County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Hasslers Mill. See our List of 1890's Communities around Hasslers Mill.

Newspapers Published in Hasslers Mill ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 12 newspapers that have been published in the area around Hasslers Mill.

Although we're unaware of any newspapers that were published in the immediate area of Hasslers Mill, there are papers which were published within 14 miles [22.5 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Hasslers Mill.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Hasslers Mill:

Unfortunately, we don't know of a website for Hasslers Mill. If you can help, please contact us through our Feedback Page.

The official website for State of Georgia: https://georgia.gov/

Footnotes ...

<1>It's generally believed that possessive apostrophes are removed to prevent confusion on maps where the apostrophe may be confused with a cartographic symbol. While this is generally true, it's not uncommon to find possessive apostrophes in administrative names (such as towns or counties).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<5>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<6>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Hasslers Mill) to Point B.Our distance measurements begin at a specific point in Hasslers Mill. The point we use is located at these GPS coordinates - Latitude: 34.8123, Longitude: -84.6952       In this case, the coordinates for Hasslers Mill have been provided by the Geographic Names Information System (GNIS).
<7>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Hasslers Mill, please let us know so that we can improve our accuracy.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025