TripAdvisor Links
Introduction ...
When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
While we are unaware of a TripAdvisor Tourism page that is specific to Laprades Mill, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Laprades Mill - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 29 communities listed:
- Altavista
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Altavista have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Altavista
- Altavista is located in Campbell County
- Population from the 2020 Census: 3,422 people
- Jump to TripAdvisor's Tourism page for Altavista <3>
- Axton
(18 miles [29 km] to the south)
- Bassett
(22 miles [35.4 km] to the southwest)
- Bedford
(29 miles [46.7 km] to the north)
- Bent Mountain
(30 miles [48.3 km] to the northwest)
- Blairs
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Blairs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blairs
- Blairs is located in Pittsylvania County
- Jump to TripAdvisor's Tourism page for Blairs <3>
- Boones Mill
(22 miles [35.4 km] to the northwest)
- Collinsville
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Collinsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Collinsville
- Collinsville is located in Henry County
- Jump to TripAdvisor's Tourism page for Collinsville <3>
- Copper Hill
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Copper Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Copper Hill
- Copper Hill is located in Floyd County
- Jump to TripAdvisor's Tourism page for Copper Hill <3>
- Danville
(26 miles [41.8 km] to the southeast)
- Eden
(29 miles [46.7 km] to the south)
- Jump to our Gazetteer entry for Eden
- Eden is located in Rockingham County (NC)
- Population from the 2020 Census: 14,867 people
- Jump to TripAdvisor's Tourism page for Eden <3>
- Ferrum
(20 miles [32.2 km] to the west)
- Fieldale
(22 miles [35.4 km] to the southwest)
- Goodview
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Goodview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goodview
- Goodview is located in Bedford County
- Jump to TripAdvisor's Tourism page for Goodview <3>
- Gretna
(15 miles [24.1 km] to the east)
- Hardy
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Hardy have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hardy
- Hardy is located in Bedford County
- Jump to TripAdvisor's Tourism page for Hardy <3>
- Henry
(20 miles [32.2 km] to the west)
- Huddleston
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Huddleston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Huddleston
- Huddleston is located in Bedford County
- Jump to TripAdvisor's Tourism page for Huddleston <3>
- Hurt
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Hurt have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hurt
- Hurt is located in Pittsylvania County
- Population from the 2020 Census: 1,211 people
- Jump to TripAdvisor's Tourism page for Hurt <3>
- Martinsville
(20 miles [32.2 km] to the southwest)
- Moneta
(18 miles [29 km] to the north)
- Penhook
(4 miles [6.4 km] to the north)
- Ridgeway
(26 miles [41.8 km] to the southwest)
- Roanoke
(29 miles [46.7 km] to the northwest)
- Rocky Mount
(14 miles [22.5 km] to the west)
- Stanleytown
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Stanleytown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stanleytown
- Stanleytown is located in Henry County
- Jump to TripAdvisor's Tourism page for Stanleytown <3>
- Union Hall
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Union Hall have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union Hall
- Union Hall is located in Franklin County
- Jump to TripAdvisor's Tourism page for Union Hall <3>
- Vinton
(28 miles [45.1 km] to the northwest)
- Wirtz
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Wirtz have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wirtz
- Wirtz is located in Franklin County
- Jump to TripAdvisor's Tourism page for Wirtz <3>
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Laprades Mill. If you can help, please contact us through our Feedback Page.
The official website for Franklin County: www.franklincountyva.org/
The official website for State of Virginia: https://www.virginia.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Laprades Mill) to Point B.Our distance measurements begin at a specific point in Laprades Mill. The point we use is located at these GPS coordinates - Latitude: 36.9158, Longitude: -79.6401 |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |