TripAdvisor Links
Introduction ...
When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
While we are unaware of a TripAdvisor Tourism page that is specific to Juniper Park Resort, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Juniper Park Resort - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 17 communities listed:
- Alton
(20 miles [32.2 km] to the southeast)
- Jump to our Gazetteer entry for Alton
- Alton is located in Kane County
- Population from the 2020 Census: 119 people
- Former names for Alton:
- Graham
- Roundy's Station
- Jump to TripAdvisor's Tourism page for Alton <2>
- Brian Head
(12 miles [19.3 km] to the west)
- Bryce Canyon City
(25 miles [40.2 km] to the east)
- Bryce Canyon
(25 miles [40.2 km] to the east)
- Cedar City
(24 miles [38.6 km] to the west)
- Jump to our Gazetteer entry for Cedar City
- Cedar City is located in Iron County
- Population from the 2020 Census: 36,090 people
- Former names for Cedar City:
- Coal Creek
- Little Muddy
- Jump to TripAdvisor's Tourism page for Cedar City <2>
- Duck Creek Village
(13 miles [20.9 km] to the south)
- Enoch
(22 miles [35.4 km] to the west)
- Glendale
(27 miles [43.5 km] to the south)
- Hatch
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Hatch have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hatch
- Hatch is located in Garfield County
- Population from the 2020 Census: 141 people
- Jump to TripAdvisor's Tourism page for Hatch <2>
- Long Valley Junction
(16 miles [25.7 km] to the south)
- Orderville
(30 miles [48.3 km] to the south)
- Panguitch Lake Resort
(Less than 2 miles to the west)
- Panguitch
(12 miles [19.3 km] to the northeast)
- Paragonah
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Paragonah
- Paragonah is located in Iron County
- Population from the 2020 Census: 556 people
- Former names for Paragonah:
- Paragoonah
- Red Creek
- Jump to TripAdvisor's Tourism page for Paragonah <2>
- Parowan
(14 miles [22.5 km] to the northwest)
- Summit
(18 miles [29 km] to the west)
- Tropic
(29 miles [46.7 km] to the east)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Juniper Park Resort. If you can help, please contact us through our Feedback Page.
The official website for State of Utah: https://www.utah.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Juniper Park Resort) to Point B.Our distance measurements begin at a specific point in Juniper Park Resort. The point we use is located at these GPS coordinates - Latitude: 37.7133, Longitude: -112.6224 In this case, the coordinates for Juniper Park Resort have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |