RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Milam County >> Splawn >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Texas


The Commemorative Quarter for Texas







TripAdvisor Links

Introduction ...

When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

While we are unaware of a TripAdvisor Tourism page that is specific to Splawn, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Splawn - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 33 communities listed:

  • Bartlett
    (27 miles [43.5 km] to the west)
    • Note: The GPS coordinates that we are using for Bartlett have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bartlett
    • Bartlett is located in Bell County
    • Population from the 2020 Census: 1,766 people
    • Jump to TripAdvisor's Tourism page for Bartlett <3>
  • Belton
    (29 miles [46.7 km] to the west)
  • Bremond
    (25 miles [40.2 km] to the northeast)
  • Buckholts
    (9 miles [14.5 km] to the west)
    • Note: The GPS coordinates that we are using for Buckholts have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Buckholts
    • Buckholts is located in Milam County
    • Population from the 2020 Census: 518 people
    • Jump to TripAdvisor's Tourism page for Buckholts <3>
  • Burlington
    (6 miles [9.7 km] to the north)
  • Calvert
    (18 miles [29 km] to the east)
  • Cameron
    (4 miles [6.4 km] to the south)
  • Chilton
    (25 miles [40.2 km] to the north)
  • Chriesman
    (25 miles [40.2 km] to the southeast)
  • Davilla
    (19 miles [30.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Davilla have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Davilla
    • Davilla is located in Milam County
    • Jump to TripAdvisor's Tourism page for Davilla <3>
  • Eddy
    (30 miles [48.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Eddy have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eddy
    • Eddy is located in McLennan County
    • Jump to TripAdvisor's Tourism page for Eddy <3>
  • Franklin
    (30 miles [48.3 km] to the east)
    • Note: The GPS coordinates that we are using for Franklin have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Franklin
    • Franklin is located in Robertson County
    • Population from the 2020 Census: 1,643 people
    • Jump to TripAdvisor's Tourism page for Franklin <3>
  • Gause
    (18 miles [29 km] to the southeast)
    • Note: The GPS coordinates that we are using for Gause have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gause
    • Gause is located in Milam County
    • Jump to TripAdvisor's Tourism page for Gause <3>
  • Granger
    (30 miles [48.3 km] to the southwest)
  • Hearne
    (23 miles [37 km] to the east)
    • Note: The GPS coordinates that we are using for Hearne have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hearne
    • Hearne is located in Robertson County
    • Population from the 2020 Census: 4,340 people
    • Jump to TripAdvisor's Tourism page for Hearne <3>
  • Heidenheimer
    (19 miles [30.6 km] to the west)
    • Note: The GPS coordinates that we are using for Heidenheimer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Heidenheimer
    • Heidenheimer is located in Bell County
    • Jump to TripAdvisor's Tourism page for Heidenheimer <3>
  • Holland
    (25 miles [40.2 km] to the west)
  • Little River
    (22 miles [35.4 km] to the west)
  • Lott
    (19 miles [30.6 km] to the north)
    • Note: The GPS coordinates that we are using for Lott have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lott
    • Lott is located in Falls County
    • Population from the 2020 Census: 744 people
    • Jump to TripAdvisor's Tourism page for Lott <3>
  • Marlin
    (27 miles [43.5 km] to the north)
  • Maysfield
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Maysfield have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maysfield
    • Maysfield is located in Milam County
    • Jump to TripAdvisor's Tourism page for Maysfield <3>
  • Milano
    (16 miles [25.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Milano have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Milano
    • Milano is located in Milam County
    • Population from the 2020 Census: 420 people
    • Jump to TripAdvisor's Tourism page for Milano <3>
  • Mumford
    (28 miles [45.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Mumford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mumford
    • Mumford is located in Robertson County
    • Jump to TripAdvisor's Tourism page for Mumford <3>
  • Pendleton
    (28 miles [45.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Pendleton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pendleton
    • Pendleton is located in Bell County
    • Jump to TripAdvisor's Tourism page for Pendleton <3>
  • Reagan
    (23 miles [37 km] to the northeast)
    • Note: The GPS coordinates that we are using for Reagan have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Reagan
    • Reagan is located in Falls County
    • Jump to TripAdvisor's Tourism page for Reagan <3>
  • Rockdale
    (18 miles [29 km] to the south)
  • Rogers
    (14 miles [22.5 km] to the west)
  • Rosebud
    (10 miles [16.1 km] to the north)
  • Satin
    (29 miles [46.7 km] to the north)
    • Note: The GPS coordinates that we are using for Satin have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Satin
    • Satin is located in Falls County
    • Jump to TripAdvisor's Tourism page for Satin <3>
  • Temple
    (24 miles [38.6 km] to the northwest)
  • Thorndale
    (24 miles [38.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Thorndale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Thorndale
    • Thorndale is located in Milam County
    • Population from the 2020 Census: 1,302 people
    • Jump to TripAdvisor's Tourism page for Thorndale <3>
  • Thrall
    (29 miles [46.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Thrall have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Thrall
    • Thrall is located in Williamson County
    • Population from the 2020 Census: 1,014 people
    • Jump to TripAdvisor's Tourism page for Thrall <3>
  • Troy
    (26 miles [41.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Troy have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Troy
    • Troy is located in Bell County
    • Population from the 2020 Census: 2,191 people
    • Jump to TripAdvisor's Tourism page for Troy <3>

Unfortunately, we don't know of an official website for Splawn. If you can help, please contact us through our Feedback Page.

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Splawn) to Point B.Our distance measurements begin at a specific point in Splawn. The point we use is located at these GPS coordinates - Latitude: 30.9202, Longitude: -96.9858       In this case, the coordinates for Splawn have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024