Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Statesville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Statesville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Statesville is located in Wilson County.
To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Wilson County: Cannon, Davidson, DeKalb, Rutherford, Smith, Sumner & Trousdale.
Below are the counties that are near Statesville. For each of these counties, we show a sample of those communities that are closest to Statesville:
- Wilson County (The home county of Statesville)
- The following are listed by their distance from Statesville, with the one closest to Statesville listed first.
- Round Top
(4 miles [6.4 km] to the east)
- Cottage Home
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Cottage Home have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cottage Home
- Cottage Home is located in Wilson County
- Estimated population in 2014: 88 people
- Watertown
(5 miles [8 km] to the north)
- Cainsville
(7 miles [11.3 km] to the west)
- Commerce
(8 miles [12.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Commerce. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Commerce
- Commerce is located in Wilson County
- Google driving directions:
- From your current location to Commerce
- From Statesville to Commerce
- Doaks Crossroads
(9 miles [14.5 km] to the northwest)
- Linwood
(10 miles [16.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Linwood. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Linwood
- Linwood is located in Wilson County
- Google driving directions:
- From your current location to Linwood
- From Statesville to Linwood
- Saulsbury
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Saulsbury have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saulsbury
- Saulsbury is located in Wilson County
- Estimated population in 2014: 96 people
- Greenwood
(10 miles [16.1 km] to the northwest)
- Lebanon
(16 miles [25.7 km] to the northwest)
- Gladeville
(17 miles [27.4 km] to the west)
- Centerville
(19 miles [30.6 km] to the north)
- Cannon County
- The following are listed by their distance from Statesville, with the one closest to Statesville listed first.
- Auburntown
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Auburntown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Auburntown
- Auburntown is located in Cannon County
- Population from the 2020 Census: 266 people
- Gassaway
(9 miles [14.5 km] to the southeast)
- Woodbury
(13 miles [20.9 km] to the south)
- Woods
(15 miles [24.1 km] to the southeast)
- Thomas Town ‑ Historic
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Thomas Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thomas Town
- Thomas Town is located in Cannon County
- Burt
(17 miles [27.4 km] to the south)
- Manus Town ‑ Historic
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Manus Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manus Town
- Manus Town is located in Cannon County
- Bluewing
(17 miles [27.4 km] to the southeast)
- Bradyville
(19 miles [30.6 km] to the south)
- Burgen
(20 miles [32.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Burgen. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Burgen
- Burgen is located in Cannon County
- Google driving directions:
- From your current location to Burgen
- From Statesville to Burgen
- Hollow Springs
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Hollow Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hollow Springs
- Hollow Springs is located in Cannon County
- Estimated population in 2014: 706 people
- Coffee County
- The following are listed by their distance from Statesville, with the one closest to Statesville listed first.
- Gossburg
(25 miles [40.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Gossburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Gossburg
- Gossburg is located in Coffee County
- Google driving directions:
- From your current location to Gossburg
- From Statesville to Gossburg
- Naola ‑ Historic
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Naola have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Naola
- Naola is located in Coffee County
- Beechgrove
(27 miles [43.5 km] to the south)
- Davidson County
- The following are listed by their distance from Statesville, with the one closest to Statesville listed first.
- Priest Lake Park
(27 miles [43.5 km] to the west)
- Rural Hill
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Rural Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rural Hill
- Rural Hill is located in Davidson County
- Population from the 2010 Census: 2,007 people
- Nashboro Village
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Nashboro Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nashboro Village
- Nashboro Village is located in Davidson County
- Hermitage
(30 miles [48.3 km] to the northwest)
- DeKalb County
- The following are listed by their distance from Statesville, with the one closest to Statesville listed first.
- Alexandria
(6 miles [9.7 km] to the northeast)
- Liberty
(8 miles [12.9 km] to the east)
- Dowelltown
(10 miles [16.1 km] to the east)
- Youngblood ‑ Historic
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Youngblood have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Youngblood
- Youngblood is located in DeKalb County
- Temperance Hall
(13 miles [20.9 km] to the east)
- Smithville
(17 miles [27.4 km] to the east)
- Philippi
(19 miles [30.6 km] to the east)
- Bear Branch ‑ Historic
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Bear Branch have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bear Branch
- Bear Branch is located in DeKalb County
- Young Bend
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Young Bend have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Young Bend
- Young Bend is located in DeKalb County
- Estimated population in 2014: 279 people
- Johnsons Chapel
(25 miles [40.2 km] to the east)
- Jackson County
- Nameless
(28 miles [45.1 km] to the northeast)
- Macon County
- Green Grove
(30 miles [48.3 km] to the north)
- Putnam County
- The following are listed by their distance from Statesville, with the one closest to Statesville listed first.
- Pekin ‑ Historic
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Pekin have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pekin
- Pekin is located in Putnam County
- Estimated population in 2014: 2,114 people
- Boma
(25 miles [40.2 km] to the east)
- Lafayette
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Lafayette have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lafayette
- Lafayette is located in Putnam County
- Estimated population in 2014: 4,962 people
- Burton
(26 miles [41.8 km] to the east)
- Baxter
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for Baxter have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Baxter
- Baxter is located in Putnam County
- Population from the 2020 Census: 1,543 people
- Jump to TripAdvisor's Tourism page for Baxter <2>
- Boiling Springs
(29 miles [46.7 km] to the east)
- Ditty
(30 miles [48.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Ditty. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ditty
- Ditty is located in Putnam County
- Google driving directions:
- From your current location to Ditty
- From Statesville to Ditty
- Rutherford County
- The following are listed by their distance from Statesville, with the one closest to Statesville listed first.
- Milton
(6 miles [9.7 km] to the southwest)
- Readyville
(13 miles [20.9 km] to the south)
- Compton
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Compton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Compton
- Compton is located in Rutherford County
- Google driving directions:
- From your current location to Compton
- From Statesville to Compton
- Walter Hill Estates
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Walter Hill Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walter Hill Estates
- Walter Hill Estates is located in Rutherford County
- Population from the 2010 Census: 401 people
- Walterhill
(14 miles [22.5 km] to the west)
- Fairfield Estates
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Fairfield Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfield Estates
- Fairfield Estates is located in Rutherford County
- Population from the 2010 Census: 131 people
- Kittrell
(15 miles [24.1 km] to the southwest)
- Jamestown
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Jamestown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jamestown
- Jamestown is located in Rutherford County
- Estimated population in 2014: 1,940 people
- Dillton
(18 miles [29 km] to the southwest)
- Murfreesboro
(19 miles [30.6 km] to the southwest)
- Colonial Village
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Colonial Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colonial Village
- Colonial Village is located in Rutherford County
- Murphree
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Murphree have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Murphree
- Murphree is located in Rutherford County
- Estimated population in 2014: 120,954 people
- Smith County
- The following are listed by their distance from Statesville, with the one closest to Statesville listed first.
- Shaver Town
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Shaver Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shaver Town
- Shaver Town is located in Smith County
- Hickman
(13 miles [20.9 km] to the northeast)
- Gordonsville
(15 miles [24.1 km] to the northeast)
- Bluff Creek
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Bluff Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bluff Creek
- Bluff Creek is located in Smith County
- Estimated population in 2014: 1,734 people
- Rock City
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Rock City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock City
- Rock City is located in Smith County
- South Carthage
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for South Carthage have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Carthage
- South Carthage is located in Smith County
- Population from the 2020 Census: 1,406 people
- Carthage
(19 miles [30.6 km] to the northeast)
- Chestnut Mound
(20 miles [32.2 km] to the northeast)
- Monoville
(21 miles [33.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Monoville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Monoville
- Monoville is located in Smith County
- Google driving directions:
- From your current location to Monoville
- From Statesville to Monoville
- Dixon Springs
(23 miles [37 km] to the north)
- Defeated
(24 miles [38.6 km] to the northeast)
- Pleasant Shade
(26 miles [41.8 km] to the north)
- Sumner County
- The following are listed by their distance from Statesville, with the one closest to Statesville listed first.
- Castalian Springs
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Castalian Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Castalian Springs
- Castalian Springs is located in Sumner County
- Population from the 2010 Census: 556 people
- Jump to TripAdvisor's Tourism page for Castalian Springs <2>
- Chipman
(30 miles [48.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Chipman. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Chipman
- Chipman is located in Sumner County
- Google driving directions:
- From your current location to Chipman
- From Statesville to Chipman
- Trousdale
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Trousdale have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trousdale
- Trousdale is located in Sumner County
- Trousdale County
- The following are listed by their distance from Statesville, with the one closest to Statesville listed first.
- Johntown
(24 miles [38.6 km] to the north)
- Hartsville
(25 miles [40.2 km] to the north)
- Warren County
- The following are listed by their distance from Statesville, with the one closest to Statesville listed first.
- Lucky
(21 miles [33.8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Lucky. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lucky
- Lucky is located in Warren County
- Google driving directions:
- From your current location to Lucky
- From Statesville to Lucky
- Centertown
(23 miles [37 km] to the southeast)
- Daylight
(23 miles [37 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Daylight. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Daylight
- Daylight is located in Warren County
- Google driving directions:
- From your current location to Daylight
- From Statesville to Daylight
- Dibrell
(23 miles [37 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Dibrell. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Dibrell
- Dibrell is located in Warren County
- Google driving directions:
- From your current location to Dibrell
- From Statesville to Dibrell
- Gath
(24 miles [38.6 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Gath. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Gath
- Gath is located in Warren County
- Google driving directions:
- From your current location to Gath
- From Statesville to Gath
- Trousdale
(26 miles [41.8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Trousdale. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Trousdale
- Trousdale is located in Warren County
- Google driving directions:
- From your current location to Trousdale
- From Statesville to Trousdale
- Horseshoe Falls ‑ Historic
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Horseshoe Falls have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Horseshoe Falls
- Horseshoe Falls is located in Warren County
- Morrison
(30 miles [48.3 km] to the south)
- Fall City
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Fall City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fall City
- Fall City is located in Warren County
- McMinnville
(30 miles [48.3 km] to the southeast)
- White County
- The following are listed by their distance from Statesville, with the one closest to Statesville listed first.
- Peeled Chestnut
(26 miles [41.8 km] to the east)
- Drop ‑ Historic
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Drop have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Drop
- Drop is located in White County
- Fanchers Mills
(28 miles [45.1 km] to the east)
- Pollard ‑ Historic
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Pollard have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pollard
- Pollard is located in White County
- Williamson County
- Nolensville
(30 miles [48.3 km] to the west)
For an expanded list of the communities that are closest to Statesville, see our County-by-County Page for Statesville.
Cemeteries Near Statesville ...
Below are cemeteries that are in the vicinity of Statesville.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Statesville covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Statesville, with the one closest to Statesville listed first.
- Jennings Cemetery
(Less than 2 miles to the west)
- Old Campground Cemetery
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for the Old Campground Cemetery
- Note: The GPS coordinates that we are using for the Old Campground Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Griffin Cemetery
(3 miles [4.8 km] to the northwest)
- Jump to our Gazetteer entry for the Griffin Cemetery
- Note: The GPS coordinates that we are using for the Griffin Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Kennedy Cemetery
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for the Kennedy Cemetery
- Note: The GPS coordinates that we are using for the Kennedy Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Talley Cemetery
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for the Talley Cemetery
- Note: The GPS coordinates that we are using for the Talley Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Grandstaff Cemetery
(4 miles [6.4 km] to the north)
- Greenvale Cemetery
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for the Greenvale Cemetery
- Note: The GPS coordinates that we are using for the Greenvale Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Waters Cemetery
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for the Waters Cemetery
- Note: The GPS coordinates that we are using for the Waters Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jones Cemetery
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for the Jones Cemetery
- Note: The GPS coordinates that we are using for the Jones Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Simpson Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the Simpson Cemetery
- Note: The GPS coordinates that we are using for the Simpson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Patterson Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the Patterson Cemetery
- Note: The GPS coordinates that we are using for the Patterson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Donnell Cemetery
(5 miles [8 km] to the south)
- Jump to our Gazetteer entry for the Donnell Cemetery
- Note: The GPS coordinates that we are using for the Donnell Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Continue List (1065 more) ...
- Hatley Cemetery
(5 miles [8 km] to the southeast)
- Jump to our Gazetteer entry for the Hatley Cemetery
- Note: The GPS coordinates that we are using for the Hatley Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Fite Cemetery
(5 miles [8 km] to the southeast)
- Jump to our Gazetteer entry for the Fite Cemetery
- Note: The GPS coordinates that we are using for the Fite Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Anderson Cemetery
(5 miles [8 km] to the east)
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
The Rand McNally Atlas shows that Statesville had a population of 77 people in 1895 with a post office and no railroad service.
These communities are listed based on their distance from Statesville, with the one closest to Statesville listed first.
- Greenvale
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Greenvale have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenvale
- Greenvale is located in Wilson County
- Round Top
(4 miles [6.4 km] to the east)
- Cherry Valley
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Cherry Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cherry Valley
- Cherry Valley is located in Wilson County
- Cottage Home
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Cottage Home have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cottage Home
- Cottage Home is located in Wilson County
- Estimated population in 2014: 88 people
- Watertown
(5 miles [8 km] to the north)
- Milton
(6 miles [9.7 km] to the southwest)
- Alexandria
(6 miles [9.7 km] to the northeast)
- Cainsville
(7 miles [11.3 km] to the west)
- Haleville ‑ Historic
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Haleville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haleville
- Haleville is located in DeKalb County
- Liberty
(8 miles [12.9 km] to the east)
- Brush Creek
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Brush Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brush Creek
- Brush Creek is located in Smith County
- Commerce
(8 miles [12.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Commerce. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Commerce
- Commerce is located in Wilson County
- Google driving directions:
- From your current location to Commerce
- From Statesville to Commerce
- Continue List (18 more) ...
- Porterfield
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Porterfield have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Porterfield
- Porterfield is located in Cannon County
- Gassaway
(9 miles [14.5 km] to the southeast)
- Shop Springs
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Shop Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shop Springs
- Shop Springs is located in Wilson County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Statesville. See our List of 1890's Communities around Statesville.
Newspapers Published in Statesville ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 45 newspapers that have been published in the area around Statesville.
Although we're unaware of any newspapers that were published in the immediate area of Statesville, there are papers which were published within 17 miles [27.4 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Statesville.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Statesville:
- Websites specific to Tennessee
- Pages specific to Wilson County
- Genealogy information for nearby counties
- Cannon County
- Coffee County
- Davidson County
- DeKalb County
- Jackson County
- Macon County
- Putnam County
- Rutherford County
- Smith County
- Sumner County
- Trousdale County
- Warren County
- White County
- Williamson County
- Cemetery Information and Directories for Tennessee
Off-the-Road Links ...
Unfortunately, we don't know of a website for Statesville. If you can help, please contact us through our Feedback Page.
The official website for Wilson County: www.wilsoncountytn.com/
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Statesville, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Statesville) to Point B.Our distance measurements begin at a specific point in Statesville. The point we use is located at these GPS coordinates - Latitude: 36.0188, Longitude: -86.1235 |