RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Blount County >> Springview >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Springview (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Springview. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most hospitals and doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Springview is located in Blount County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Blount County: Graham (NC), Swain (NC), Knox, Loudon, Monroe & Sevier.

Below are the counties that are near Springview. For each of these counties, we show a sample of those communities that are closest to Springview:

  • Blount County     (The home county of Springview)
    • The following are listed by their distance from Springview, with the one closest to Springview listed first.
    • Binfield
      (Less than 2 miles to the north)
      • Jump to our Gazetteer entry for Binfield
      • Binfield is located in Blount County
    • Brick Mill
      (2 miles [3.2 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Brick Mill. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Brick Mill
      • Brick Mill is located in Blount County
    • Walnut Hill Estates
      (3 miles [4.8 km] to the east)
      • Note: The GPS coordinates that we are using for Walnut Hill Estates have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walnut Hill Estates
      • Walnut Hill Estates is located in Blount County
      • Population from the 2010 Census: 2,394 people
    • Big Springs
      (3 miles [4.8 km] to the northwest)
      • Jump to our Gazetteer entry for Big Springs
      • Big Springs is located in Blount County
      • Big Springs has also been known as:
      • Cliff
    • Cloyd Creek ‑ Historic
      (3 miles [4.8 km] to the west)
      • Note: The GPS coordinates that we are using for Cloyd Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cloyd Creek
      • Cloyd Creek is located in Blount County
    • Fairway Estates
      (4 miles [6.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Fairway Estates have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairway Estates
      • Fairway Estates is located in Blount County
      • Estimated population in 2014: 8,224 people
    • Sixmile
      (6 miles [9.7 km] to the east)
      • Jump to our Gazetteer entry for Sixmile
      • Sixmile is located in Blount County
    • Friendsville
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Friendsville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Friendsville
      • Friendsville is located in Blount County
      • Population from the 2020 Census: 902 people
      • Jump to TripAdvisor's Tourism page for Friendsville <3>
    • Kiser
      (6 miles [9.7 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Kiser. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Kiser
      • Kiser is located in Blount County
    • McMullens
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for McMullens have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McMullens
      • McMullens is located in Blount County
      • Estimated population in 2014: 13,620 people
    • Maryville
      (7 miles [11.3 km] to the northeast)
    • Chelsey Village
      (8 miles [12.9 km] to the northeast)
      • Note: The GPS coordinates that we are using for Chelsey Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chelsey Village
      • Chelsey Village is located in Blount County
  • Anderson County
    • The following are listed by their distance from Springview, with the one closest to Springview listed first.
    • Scarboro
      (22 miles [35.4 km] to the north)
      • Jump to our Gazetteer entry for Scarboro
      • Scarboro is located in Anderson County
    • Spring Hill
      (23 miles [37 km] to the north)
      • Note: The GPS coordinates that we are using for Spring Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spring Hill
      • Spring Hill is located in Anderson County
      • Estimated population in 2014: 16,752 people
    • Oak Ridge
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Oak Ridge have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Ridge
      • Oak Ridge is located in Anderson County
      • Population from the 2020 Census: 29,340 people
      • Jump to TripAdvisor's Tourism page for Oak Ridge <3>
    • Claxton
      (25 miles [40.2 km] to the north)
      • Jump to our Gazetteer entry for Claxton
      • Claxton is located in Anderson County
    • Robertsville
      (25 miles [40.2 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Robertsville. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Robertsville
      • Robertsville is located in Anderson County
    • Peak
      (26 miles [41.8 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Peak. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Peak
      • Peak is located in Anderson County
    • Oliver Springs
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Oliver Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oliver Springs
      • Oliver Springs is located in Anderson County
      • Population from the 2020 Census: 3,439 people
      • Jump to TripAdvisor's Tourism page for Oliver Springs <3>
    • Clinton
      (29 miles [46.7 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Clinton. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Clinton
      • Clinton is located in Anderson County
      • Population from the 2020 Census: 10,119 people
      • Jump to TripAdvisor's Tourism page for Clinton <3>
    • Fairview ‑ Historic
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairview
      • Fairview is located in Anderson County
    • Leinarts
      (30 miles [48.3 km] to the north)
      • Jump to our Gazetteer entry for Leinarts
      • Leinarts is located in Anderson County
    • Panther ‑ Historic
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Panther have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Panther
      • Panther is located in Anderson County
  • Knox County
    • The following are listed by their distance from Springview, with the one closest to Springview listed first.
    • Boyd
      (12 miles [19.3 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Boyd. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Boyd
      • Boyd is located in Knox County
    • Concord
      (13 miles [20.9 km] to the north)
      • Jump to our Gazetteer entry for Concord
      • Concord is located in Knox County
    • Virtue
      (13 miles [20.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Virtue have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Virtue
      • Virtue is located in Knox County
      • Estimated population in 2014: 131 people
    • Belle Aire
      (14 miles [22.5 km] to the north)
      • Note: The GPS coordinates that we are using for Belle Aire have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belle Aire
      • Belle Aire is located in Knox County
      • Estimated population in 2014: 512 people
    • Farragut
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Farragut have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Farragut
      • Farragut is located in Knox County
      • Population from the 2020 Census: 24,045 people
      • Jump to TripAdvisor's Tourism page for Farragut <3>
    • Aldenwood Park
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Aldenwood Park have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Aldenwood Park
      • Aldenwood Park is located in Knox County
      • Estimated population in 2014: 8,753 people
    • Ebenezer
      (15 miles [24.1 km] to the north)
      • Jump to our Gazetteer entry for Ebenezer
      • Ebenezer is located in Knox County
    • Kingston Woods
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Kingston Woods have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kingston Woods
      • Kingston Woods is located in Knox County
      • Estimated population in 2014: 2,790 people
    • Topside
      (15 miles [24.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Topside have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Topside
      • Topside is located in Knox County
      • Estimated population in 2014: 346 people
    • Arrowhead
      (16 miles [25.7 km] to the northeast)
      • Jump to our Gazetteer entry for Arrowhead
      • Arrowhead is located in Knox County
    • Bonny Kate
      (17 miles [27.4 km] to the northeast)
      • Jump to our Gazetteer entry for Bonny Kate
      • Bonny Kate is located in Knox County
    • Middlebrook Acres
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for Middlebrook Acres have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Middlebrook Acres
      • Middlebrook Acres is located in Knox County
      • Estimated population in 2014: 593 people
  • Loudon County
    • The following are listed by their distance from Springview, with the one closest to Springview listed first.
    • Jena
      (4 miles [6.4 km] to the west)
      • Jump to our Gazetteer entry for Jena
      • Jena is located in Loudon County
      • Estimated population in 2014: 2,279 people
    • Greenback
      (5 miles [8 km] to the west)
    • Trigonia
      (7 miles [11.3 km] to the southwest)
      • Jump to our Gazetteer entry for Trigonia
      • Trigonia is located in Loudon County
    • Alleghany ‑ Historic
      (7 miles [11.3 km] to the west)
      • Note: The GPS coordinates that we are using for Alleghany have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alleghany
      • Alleghany is located in Loudon County
      • Estimated population in 2014: 630 people
    • Centersville
      (7 miles [11.3 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Centersville. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Centersville
      • Centersville is located in Loudon County
    • Morganton
      (8 miles [12.9 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Morganton. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Morganton
      • Morganton is located in Loudon County
    • Lenoir City
      (13 miles [20.9 km] to the northwest)
    • Sharp Estates
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Sharp Estates have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sharp Estates
      • Sharp Estates is located in Loudon County
      • Estimated population in 2014: 919 people
    • Loudon
      (15 miles [24.1 km] to the west)
    • Eaton Crossroads
      (16 miles [25.7 km] to the northwest)
      • Jump to our Gazetteer entry for Eaton Crossroads
      • Eaton Crossroads is located in Loudon County
    • Vancouver ‑ Historic
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Vancouver have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vancouver
      • Vancouver is located in Loudon County
    • Loudon City Park
      (17 miles [27.4 km] to the west)
      • Note: The GPS coordinates that we are using for Loudon City Park have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Loudon City Park
      • Loudon City Park is located in Loudon County
  • McMinn County
    • The following are listed by their distance from Springview, with the one closest to Springview listed first.
    • Bell Spring
      (24 miles [38.6 km] to the west)
      • Jump to our Gazetteer entry for Bell Spring
      • Bell Spring is located in McMinn County
    • Manila
      (27 miles [43.5 km] to the southwest)
      • Jump to our Gazetteer entry for Manila
      • Manila is located in McMinn County
    • Niota
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Niota have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Niota
      • Niota is located in McMinn County
      • Population from the 2020 Census: 738 people
      • Jump to TripAdvisor's Tourism page for Niota <3>
    • Nonaburg
      (28 miles [45.1 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Nonaburg. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Nonaburg
      • Nonaburg is located in McMinn County
    • Prigmore
      (28 miles [45.1 km] to the west)
      • Jump to our Gazetteer entry for Prigmore
      • Prigmore is located in McMinn County
    • Englewood
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Englewood have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Englewood
      • Englewood is located in McMinn County
      • Population from the 2020 Census: 1,538 people
      • Jump to TripAdvisor's Tourism page for Englewood <3>
    • Mecca
      (29 miles [46.7 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Mecca. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Mecca
      • Mecca is located in McMinn County
  • Monroe County
    • The following are listed by their distance from Springview, with the one closest to Springview listed first.
    • Halfway Town ‑ Historic
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Halfway Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Halfway Town
      • Halfway Town is located in Monroe County
    • Ipe ‑ Historic
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Ipe have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ipe
      • Ipe is located in Monroe County
    • Tuskeegee ‑ Historic
      (9 miles [14.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Tuskeegee have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tuskeegee
      • Tuskeegee is located in Monroe County
      • Estimated population in 2014: 2,663 people
    • Vonore
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Vonore have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vonore
      • Vonore is located in Monroe County
      • Population from the 2020 Census: 1,580 people
      • Jump to TripAdvisor's Tourism page for Vonore <3>
    • Acorn
      (16 miles [25.7 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Acorn. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Acorn
      • Acorn is located in Monroe County
    • Ballplay
      (16 miles [25.7 km] to the southwest)
      • Jump to our Gazetteer entry for Ballplay
      • Ballplay is located in Monroe County
    • Belltown
      (19 miles [30.6 km] to the southwest)
      • Jump to our Gazetteer entry for Belltown
      • Belltown is located in Monroe County
    • Madisonville
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Madisonville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Madisonville
      • Madisonville is located in Monroe County
      • Population from the 2020 Census: 5,024 people
      • Jump to TripAdvisor's Tourism page for Madisonville <3>
    • Sweetwater
      (22 miles [35.4 km] to the west)
      • Note: The GPS coordinates that we are using for Sweetwater have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sweetwater
      • Sweetwater is located in Monroe County
      • Population from the 2020 Census: 5,956 people
      • Jump to TripAdvisor's Tourism page for Sweetwater <3>
    • Jacktown
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Jacktown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jacktown
      • Jacktown is located in Monroe County
      • Estimated population in 2014: 67,319 people
    • Tellico Plains
      (25 miles [40.2 km] to the southwest)
    • Jalapa
      (28 miles [45.1 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Jalapa. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Jalapa
      • Jalapa is located in Monroe County
  • Morgan County
    • The following are listed by their distance from Springview, with the one closest to Springview listed first.
    • Tupper Town
      (29 miles [46.7 km] to the northwest)
      • Jump to our Gazetteer entry for Tupper Town
      • Tupper Town is located in Morgan County
    • Blue Gem ‑ Historic
      (30 miles [48.3 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Blue Gem. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Blue Gem
      • Blue Gem is located in Morgan County
    • Coal Hill
      (30 miles [48.3 km] to the northwest)
      • Jump to our Gazetteer entry for Coal Hill
      • Coal Hill is located in Morgan County
  • Roane County
    • The following are listed by their distance from Springview, with the one closest to Springview listed first.
    • Cave Creek
      (19 miles [30.6 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Cave Creek. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Cave Creek
      • Cave Creek is located in Roane County
    • Bear ‑ Historic
      (22 miles [35.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Bear have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bear
      • Bear is located in Roane County
    • Bradbury
      (22 miles [35.4 km] to the northwest)
      • Jump to our Gazetteer entry for Bradbury
      • Bradbury is located in Roane County
    • Selkirk ‑ Historic
      (22 miles [35.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Selkirk have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Selkirk
      • Selkirk is located in Roane County
    • Wheat ‑ Historic
      (24 miles [38.6 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Wheat. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Wheat
      • Wheat is located in Roane County
    • Ethel ‑ Historic
      (25 miles [40.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Ethel have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ethel
      • Ethel is located in Roane County
      • Estimated population in 2014: 2,049 people
    • Kries
      (26 miles [41.8 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Kries. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Kries
      • Kries is located in Roane County
    • Iron Divide ‑ Historic
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Iron Divide have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Iron Divide
      • Iron Divide is located in Roane County
      • Population from the 2010 Census: 328 people
    • Dyllis
      (27 miles [43.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Dyllis. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Dyllis
      • Dyllis is located in Roane County
    • Laddie Village
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Laddie Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Laddie Village
      • Laddie Village is located in Roane County
    • Morrisgap ‑ Historic
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Morrisgap have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morrisgap
      • Morrisgap is located in Roane County
    • Kingston
      (28 miles [45.1 km] to the northwest)
  • Sevier County
    • The following are listed by their distance from Springview, with the one closest to Springview listed first.
    • Seymour Heights
      (22 miles [35.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Seymour Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Seymour Heights
      • Seymour Heights is located in Sevier County
      • Population from the 2010 Census: 10,919 people
    • Wear Valley
      (23 miles [37 km] to the east)
      • Jump to our Gazetteer entry for Wear Valley
      • Wear Valley is located in Sevier County
    • Dupont
      (23 miles [37 km] to the northeast)
      • Jump to our Gazetteer entry for Dupont
      • Dupont is located in Sevier County
    • Seymour
      (24 miles [38.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Seymour have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Seymour
      • Seymour is located in Sevier County
      • Jump to TripAdvisor's Tourism page for Seymour <3>
    • Oak City
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Oak City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak City
      • Oak City is located in Sevier County
    • Waldens Creek
      (26 miles [41.8 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Waldens Creek. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Waldens Creek
      • Waldens Creek is located in Sevier County
    • Elkmont ‑ Historic
      (27 miles [43.5 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Elkmont. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Elkmont
      • Elkmont is located in Sevier County
    • Starkeytown
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Starkeytown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Starkeytown
      • Starkeytown is located in Sevier County
      • Estimated population in 2014: 431 people
    • Boyds Creek
      (28 miles [45.1 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Boyds Creek. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Boyds Creek
      • Boyds Creek is located in Sevier County
    • Chalet Village
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Chalet Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chalet Village
      • Chalet Village is located in Sevier County
    • Pigeon Forge
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Pigeon Forge have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pigeon Forge
      • Pigeon Forge is located in Sevier County
      • Population from the 2020 Census: 6,237 people
      • Jump to TripAdvisor's Tourism page for Pigeon Forge <3>
  • Graham County (NC)
    • The following are listed by their distance from Springview, with the one closest to Springview listed first.
    • Fontana Dam
      (21 miles [33.8 km] to the southeast)
      • Jump to our Gazetteer entry for Fontana Dam
      • Fontana Dam is located in Graham County (NC)
      • Population from the 2020 Census: 6 people
      • Fontana Dam has also been known as:
      • Fontana Village
      • Jump to TripAdvisor's Tourism page for Fontana Dam <3>
    • Yellow Creek
      (22 miles [35.4 km] to the southeast)
      • Jump to our Gazetteer entry for Yellow Creek
      • Yellow Creek is located in Graham County (NC)
    • Lake Santeetlah
      (24 miles [38.6 km] to the southeast)
      • Jump to our Gazetteer entry for Lake Santeetlah
      • Lake Santeetlah is located in Graham County (NC)
      • Population from the 2020 Census: 43 people
      • Lake Santeetlah has also been known as:
      • Santeetla
      • Santeetlah
      • Santultah
      • Thunderbird Mountain
      • Thunderbird
    • Robbinsville
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Robbinsville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Robbinsville
      • Robbinsville is located in Graham County (NC)
      • Population from the 2020 Census: 716 people
      • Jump to TripAdvisor's Tourism page for Robbinsville <3>
    • Cheoah
      (29 miles [46.7 km] to the southeast)
      • Jump to our Gazetteer entry for Cheoah
      • Cheoah is located in Graham County (NC)
    • Stecoah
      (30 miles [48.3 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Stecoah. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Stecoah
      • Stecoah is located in Graham County (NC)

For an expanded list of the communities that are closest to Springview, see our County-by-County Page for Springview.

Cemeteries Near Springview ...

Below are cemeteries that are in the vicinity of Springview.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Springview covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Springview, with the one closest to Springview listed first.

  • Crossroads Tabernacle Cemetery
    (2 miles [3.2 km] to the southwest)
  • Bakers Creek Cemetery
    (2 miles [3.2 km] to the southwest)
    • Jump to our Gazetteer entry for the Bakers Creek Cemetery
    • Note: The GPS coordinates that we are using for the Bakers Creek Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Centenary Cemetery
    (2 miles [3.2 km] to the south)
    • Jump to our Gazetteer entry for the Centenary Cemetery
    • Note: The GPS coordinates that we are using for the Centenary Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Oakland Cemetery
    (2 miles [3.2 km] to the northeast)
    • Jump to our Gazetteer entry for the Oakland Cemetery
    • Note: The GPS coordinates that we are using for the Oakland Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Hopewell Cemetery
    (2 miles [3.2 km] to the northeast)
  • Clover Hill Cemetery
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for the Clover Hill Cemetery
    • Note: The GPS coordinates that we are using for the Clover Hill Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Salem Cemetery
    (2 miles [3.2 km] to the northwest)
    • Jump to our Gazetteer entry for the Salem Cemetery
    • Note: The GPS coordinates that we are using for the Salem Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Lambert Cemetery
    (3 miles [4.8 km] to the south)
    • Jump to our Gazetteer entry for the Lambert Cemetery
    • Note: The GPS coordinates that we are using for the Lambert Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Big Springs Cemetery
    (3 miles [4.8 km] to the northwest)
    • Jump to our Gazetteer entry for the Big Springs Cemetery
    • Note: The GPS coordinates that we are using for the Big Springs Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Hamil Cemetery
    (3 miles [4.8 km] to the east)
    • Jump to our Gazetteer entry for the Hamil Cemetery
    • Note: The GPS coordinates that we are using for the Hamil Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Liberty Cemetery
    (4 miles [6.4 km] to the southwest)
  • Williamsons Chapel Cemetery
    (4 miles [6.4 km] to the southwest)
    • Jump to our Gazetteer entry for the Williamsons Chapel Cemetery
    • Note: The GPS coordinates that we are using for the Williamsons Chapel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Continue List   (762 more) ...
    • Nelson Chapel Cemetery
      (4 miles [6.4 km] to the south)
      • Jump to our Gazetteer entry for the Nelson Chapel Cemetery
      • Note: The GPS coordinates that we are using for the Nelson Chapel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Kagleys Chapel Cemetery
      (4 miles [6.4 km] to the southeast)
      • Jump to our Gazetteer entry for the Kagleys Chapel Cemetery
      • Note: The GPS coordinates that we are using for the Kagleys Chapel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Kagley Cemetery
      (4 miles [6.4 km] to the southeast)
      • Jump to our Gazetteer entry for the Kagley Cemetery
      • Note: The GPS coordinates that we are using for the Kagley Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

While we didn't find Springview in the Atlas, the following 1895 communities would have been found near the current location of Springview.

These communities are listed based on their distance from Springview, with the one closest to Springview listed first.

  • Brick Mill
    (2 miles [3.2 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for Brick Mill. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Brick Mill
    • Brick Mill is located in Blount County
  • Clover Hill
    (2 miles [3.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Clover Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clover Hill
    • Clover Hill is located in Blount County
  • Mint
    (3 miles [4.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Mint have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mint
    • Mint is located in Blount County
  • Cloyd Creek ‑ Historic
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for Cloyd Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cloyd Creek
    • Cloyd Creek is located in Blount County
  • Greenback
    (5 miles [8 km] to the west)
  • Montvale
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Montvale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Montvale
    • Montvale is located in Blount County
  • Meadow
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Meadow have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Meadow
    • Meadow is located in Loudon County
  • Allegheny Springs ‑ Historic
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Allegheny Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Allegheny Springs
    • Allegheny Springs is located in Blount County
  • Kiser
    (6 miles [9.7 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Kiser. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Kiser
    • Kiser is located in Blount County
  • Trigonia
    (7 miles [11.3 km] to the southwest)
    • Jump to our Gazetteer entry for Trigonia
    • Trigonia is located in Loudon County
  • Blockhouse
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Blockhouse have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Blockhouse
    • Blockhouse is located in Blount County
  • Maryville
    (7 miles [11.3 km] to the northeast)
  • Continue List   (13 more) ...
    • Unitia
      (7 miles [11.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Unitia have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Unitia
      • Unitia is located in Loudon County
    • Morganton
      (8 miles [12.9 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Morganton. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Morganton
      • Morganton is located in Loudon County
    • McGhee
      (8 miles [12.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for McGhee have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McGhee
      • McGhee is located in Monroe County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Springview. See our List of 1890's Communities around Springview.

Newspapers Published in Springview ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 35 newspapers that have been published in the area around Springview.

Although we're unaware of any newspapers that were published in the immediate area of Springview, there are papers which were published within 7 miles [11.3 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Springview.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Springview:

Unfortunately, we don't know of a website for Springview. If you can help, please contact us through our Feedback Page.

The official website for Blount County: www.korrnet.org/blountco/

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Springview, please let us know so that we can improve our accuracy.
<5>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Springview) to Point B.Our distance measurements begin at a specific point in Springview. The point we use is located at these GPS coordinates - Latitude: 35.6792, Longitude: -84.0741       In this case, the coordinates for Springview have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025