RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Carroll County >> Concord >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Concord (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Concord. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Concord is located in Carroll County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Carroll County: Benton, Decatur, Gibson, Henderson, Henry, Madison & Weakley.

Below are the counties that are near Concord. For each of these counties, we show a sample of those communities that are closest to Concord:

  • Carroll County     (The home county of Concord)
    • The following are listed by their distance from Concord, with the one closest to Concord listed first.
    • Clarksburg
      (4 miles [6.4 km] to the south)
      • Note: The GPS coordinates that we are using for Clarksburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clarksburg
      • Clarksburg is located in Carroll County
      • Population from the 2020 Census: 376 people
    • Buena Vista
      (5 miles [8 km] to the northeast)
    • Huntingdon
      (6 miles [9.7 km] to the northwest)
    • Bruceton
      (9 miles [14.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Bruceton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bruceton
      • Bruceton is located in Carroll County
      • Population from the 2020 Census: 1,391 people
      • Jump to TripAdvisor's Tourism page for Bruceton <2>
    • Hollow Rock
      (9 miles [14.5 km] to the northeast)
    • McLemoresville
      (12 miles [19.3 km] to the west)
    • Hico
      (13 miles [20.9 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Hico. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Hico
      • Hico is located in Carroll County
      • Google driving directions:
      • From your current location to Hico
      • From Concord to Hico
    • Wingo
      (14 miles [22.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Wingo. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Wingo
      • Wingo is located in Carroll County
      • Google driving directions:
      • From your current location to Wingo
      • From Concord to Wingo
    • Cedar Grove
      (14 miles [22.5 km] to the southwest)
    • Trezevant
      (15 miles [24.1 km] to the west)
    • Whitthorne
      (15 miles [24.1 km] to the west)
    • McKenzie
      (16 miles [25.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for McKenzie have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McKenzie
      • McKenzie is located in Carroll County
      • Population from the 2020 Census: 5,303 people
      • Jump to TripAdvisor's Tourism page for McKenzie <2>
    • Atwood
      (17 miles [27.4 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Atwood. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Atwood
      • Atwood is located in Carroll County
      • Population from the 2020 Census: 915 people
      • Google driving directions:
      • From your current location to Atwood
      • From Concord to Atwood
  • Benton County
    • The following are listed by their distance from Concord, with the one closest to Concord listed first.
    • Crossroads
      (13 miles [20.9 km] to the northeast)
      • Note: The GPS coordinates that we are using for Crossroads have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Crossroads
      • Crossroads is located in Benton County
      • Estimated population in 2014: 1,728 people
    • Sandy Point
      (13 miles [20.9 km] to the northeast)
    • Chaseville
      (14 miles [22.5 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Chaseville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Chaseville
      • Chaseville is located in Benton County
      • Google driving directions:
      • From your current location to Chaseville
      • From Concord to Chaseville
    • Camden
      (17 miles [27.4 km] to the northeast)
    • Coxburg
      (18 miles [29 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Coxburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Coxburg
      • Coxburg is located in Benton County
      • Google driving directions:
      • From your current location to Coxburg
      • From Concord to Coxburg
    • Wildlife Cove Village
      (18 miles [29 km] to the east)
      • Note: The GPS coordinates that we are using for Wildlife Cove Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wildlife Cove Village
      • Wildlife Cove Village is located in Benton County
    • Brevards Ferry
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Brevards Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Brevards Ferry
      • Brevards Ferry is located in Benton County
      • Estimated population in 2014: 40,982 people
    • Big Sandy
      (26 miles [41.8 km] to the northeast)
    • Faxon
      (30 miles [48.3 km] to the northeast)
  • Chester County
  • Decatur County
    • The following are listed by their distance from Concord, with the one closest to Concord listed first.
    • Sulphur Springs ‑ Historic
      (18 miles [29 km] to the southeast)
    • Sugar Tree
      (19 miles [30.6 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Sugar Tree. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Sugar Tree
      • Sugar Tree is located in Decatur County
      • Google driving directions:
      • From your current location to Sugar Tree
      • From Concord to Sugar Tree
    • Jeannette
      (19 miles [30.6 km] to the southeast)
    • Oakview ‑ Historic
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Oakview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oakview
      • Oakview is located in Decatur County
    • Parsons
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Parsons have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Parsons
      • Parsons is located in Decatur County
      • Population from the 2020 Census: 2,272 people
      • Jump to TripAdvisor's Tourism page for Parsons <2>
    • Decaturville
      (27 miles [43.5 km] to the southeast)
    • Scotts Hill
      (29 miles [46.7 km] to the south)
    • Mount Lebanon
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Mount Lebanon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Lebanon
      • Mount Lebanon is located in Decatur County
      • Estimated population in 2014: 29,387 people
  • Gibson County
    • The following are listed by their distance from Concord, with the one closest to Concord listed first.
    • Ledbetter
      (20 miles [32.2 km] to the west)
      • Note: The GPS coordinates that we are using for Ledbetter have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ledbetter
      • Ledbetter is located in Gibson County
      • Estimated population in 2014: 29,427 people
    • Graball
      (21 miles [33.8 km] to the west)
      • Note: The GPS coordinates that we are using for Graball have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Graball
      • Graball is located in Gibson County
      • Population from the 2010 Census: 236 people
    • Milan
      (21 miles [33.8 km] to the west)
    • Whitway
      (21 miles [33.8 km] to the west)
    • Sitka
      (22 miles [35.4 km] to the west)
    • Goat City
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Goat City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Goat City
      • Goat City is located in Gibson County
    • Union Central
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Union Central have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Union Central
      • Union Central is located in Gibson County
      • Estimated population in 2014: 3,574 people
    • Medina
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Medina have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Medina
      • Medina is located in Gibson County
      • Population from the 2020 Census: 4,379 people
      • Jump to TripAdvisor's Tourism page for Medina <2>
    • Bradford
      (26 miles [41.8 km] to the west)
    • Concord
      (26 miles [41.8 km] to the west)
    • Gibson
      (27 miles [43.5 km] to the west)
    • Four Points
      (30 miles [48.3 km] to the northwest)
    • Humboldt
      (30 miles [48.3 km] to the west)
      • Note: The GPS coordinates that we are using for Humboldt have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Humboldt
      • Humboldt is located in Gibson County
      • Population from the 2020 Census: 8,126 people
      • Jump to TripAdvisor's Tourism page for Humboldt <2>
  • Henderson County
    • The following are listed by their distance from Concord, with the one closest to Concord listed first.
    • Farmville ‑ Historic
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Farmville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Farmville
      • Farmville is located in Henderson County
    • Parkers Crossroads
      (9 miles [14.5 km] to the south)
    • Union Cross
      (12 miles [19.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Union Cross have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Union Cross
      • Union Cross is located in Henderson County
      • Estimated population in 2014: 10,666 people
    • Poplar Springs
      (13 miles [20.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Poplar Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Poplar Springs
      • Poplar Springs is located in Henderson County
    • McHaney ‑ Historic
      (14 miles [22.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for McHaney have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McHaney
      • McHaney is located in Henderson County
    • Atkins ‑ Historic
      (15 miles [24.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Atkins have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Atkins
      • Atkins is located in Henderson County
      • Estimated population in 2014: 13,664 people
    • Lexington
      (19 miles [30.6 km] to the south)
    • Chesterfield
      (20 miles [32.2 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Chesterfield. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Chesterfield
      • Chesterfield is located in Henderson County
      • Population from the 2010 Census: 469 people
      • Google driving directions:
      • From your current location to Chesterfield
      • From Concord to Chesterfield
    • Darden
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Darden have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Darden
      • Darden is located in Henderson County
      • Population from the 2010 Census: 399 people
    • White Fern
      (23 miles [37 km] to the southwest)
    • Huron
      (25 miles [40.2 km] to the south)
    • Middle Fork
      (27 miles [43.5 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Middle Fork. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Middle Fork
      • Middle Fork is located in Henderson County
      • Google driving directions:
      • From your current location to Middle Fork
      • From Concord to Middle Fork
    • Reagan
      (28 miles [45.1 km] to the south)
  • Henry County
    • The following are listed by their distance from Concord, with the one closest to Concord listed first.
    • Haglerville ‑ Historic
      (16 miles [25.7 km] to the north)
      • Note: The GPS coordinates that we are using for Haglerville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Haglerville
      • Haglerville is located in Henry County
    • Henry
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for Henry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Henry
      • Henry is located in Henry County
      • Population from the 2020 Census: 446 people
      • Jump to TripAdvisor's Tourism page for Henry <2>
    • Spring Creek
      (20 miles [32.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Spring Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spring Creek
      • Spring Creek is located in Henry County
      • Estimated population in 2014: 2,009 people
    • Manleyville
      (23 miles [37 km] to the northeast)
    • Oakland
      (25 miles [40.2 km] to the north)
    • Paris
      (25 miles [40.2 km] to the north)
    • Springville
      (25 miles [40.2 km] to the northeast)
    • India
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for India have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for India
      • India is located in Henry County
    • New Boston
      (28 miles [45.1 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for New Boston. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for New Boston
      • New Boston is located in Henry County
      • Google driving directions:
      • From your current location to New Boston
      • From Concord to New Boston
    • Whitlock
      (30 miles [48.3 km] to the north)
  • Humphreys County
    • The following are listed by their distance from Concord, with the one closest to Concord listed first.
    • Hustburg
      (22 miles [35.4 km] to the east)
    • New Johnsonville
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for New Johnsonville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Johnsonville
      • New Johnsonville is located in Humphreys County
      • Population from the 2020 Census: 1,871 people
      • Jump to TripAdvisor's Tourism page for New Johnsonville <2>
    • Plant
      (26 miles [41.8 km] to the east)
    • Bakerville
      (27 miles [43.5 km] to the east)
  • Madison County
    • The following are listed by their distance from Concord, with the one closest to Concord listed first.
    • Spring Creek
      (20 miles [32.2 km] to the southwest)
    • Claybrook
      (21 miles [33.8 km] to the southwest)
    • Oakfield
      (28 miles [45.1 km] to the southwest)
    • Three Way
      (29 miles [46.7 km] to the west)
    • Lawrence
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lawrence have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lawrence
      • Lawrence is located in Madison County
      • Estimated population in 2014: 10,498 people
  • Perry County
    • Mousetail ‑ Historic
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Mousetail have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mousetail
      • Mousetail is located in Perry County
  • Weakley County
    • The following are listed by their distance from Concord, with the one closest to Concord listed first.
    • Pillowville
      (22 miles [35.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Pillowville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pillowville
      • Pillowville is located in Weakley County
      • Estimated population in 2014: 1,625 people
    • Tumbling
      (23 miles [37 km] to the northwest)
    • Gleason
      (24 miles [38.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Gleason have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gleason
      • Gleason is located in Weakley County
      • Population from the 2020 Census: 1,369 people
      • Jump to TripAdvisor's Tourism page for Gleason <2>
    • Ore Springs
      (27 miles [43.5 km] to the northwest)
    • Greenfield
      (28 miles [45.1 km] to the northwest)
    • Dresden
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Dresden have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dresden
      • Dresden is located in Weakley County
      • Population from the 2020 Census: 2,907 people
      • Jump to TripAdvisor's Tourism page for Dresden <2>

For an expanded list of the communities that are closest to Concord, see our County-by-County Page for Concord.

Cemeteries Near Concord ...

Below are cemeteries that are in the vicinity of Concord.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Concord covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Concord, with the one closest to Concord listed first.

  • Bar Springs Cemetery
    (Less than 2 miles to the southeast)
    • Jump to our Gazetteer entry for the Bar Springs Cemetery
    • Note: The GPS coordinates that we are using for the Bar Springs Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Smith Cemetery
    (2 miles [3.2 km] to the south)
    • Jump to our Gazetteer entry for the Smith Cemetery
    • Note: The GPS coordinates that we are using for the Smith Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jamison Cemetery
    (2 miles [3.2 km] to the southeast)
    • Jump to our Gazetteer entry for the Jamison Cemetery
    • Note: The GPS coordinates that we are using for the Jamison Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Davis Chapel Cemetery
    (2 miles [3.2 km] to the west)
    • Jump to our Gazetteer entry for the Davis Chapel Cemetery
    • Note: The GPS coordinates that we are using for the Davis Chapel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Sellers Cemetery
    (3 miles [4.8 km] to the southwest)
    • Jump to our Gazetteer entry for the Sellers Cemetery
    • Note: The GPS coordinates that we are using for the Sellers Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Blair Cemetery
    (3 miles [4.8 km] to the south)
    • Jump to our Gazetteer entry for the Blair Cemetery
    • Note: The GPS coordinates that we are using for the Blair Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Tucker Cemetery
    (3 miles [4.8 km] to the southeast)
    • Jump to our Gazetteer entry for the Tucker Cemetery
    • Note: The GPS coordinates that we are using for the Tucker Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Eubank Cemetery
    (3 miles [4.8 km] to the east)
    • Jump to our Gazetteer entry for the Eubank Cemetery
    • Note: The GPS coordinates that we are using for the Eubank Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Cawthon Cemetery
    (3 miles [4.8 km] to the north)
    • Jump to our Gazetteer entry for the Cawthon Cemetery
    • Note: The GPS coordinates that we are using for the Cawthon Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Palmer Shelter Cemetery
    (3 miles [4.8 km] to the west)
    • Jump to our Gazetteer entry for the Palmer Shelter Cemetery
    • Note: The GPS coordinates that we are using for the Palmer Shelter Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Enochs Cemetery
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for the Enochs Cemetery
    • Note: The GPS coordinates that we are using for the Enochs Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Taylor Cemetery
    (4 miles [6.4 km] to the east)
    • Jump to our Gazetteer entry for the Taylor Cemetery
    • Note: The GPS coordinates that we are using for the Taylor Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (749 more) ...

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

While we didn't find Concord in the Atlas, the following 1895 communities would have been found near the current location of Concord.

These communities are listed based on their distance from Concord, with the one closest to Concord listed first.

  • Clarksburg
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Clarksburg have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clarksburg
    • Clarksburg is located in Carroll County
    • Population from the 2020 Census: 376 people
  • Buena Vista
    (5 miles [8 km] to the northeast)
  • Dollar
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Dollar have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dollar
    • Dollar is located in Carroll County
  • Huntingdon
    (6 miles [9.7 km] to the northwest)
  • Leach
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Leach have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leach
    • Leach is located in Carroll County
  • Maple Creek ‑ Historic
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Maple Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maple Creek
    • Maple Creek is located in Carroll County
  • Rosser
    (7 miles [11.3 km] to the north)
    • Note: The GPS coordinates that we are using for Rosser have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rosser
    • Rosser is located in Carroll County
  • Farmville ‑ Historic
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Farmville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Farmville
    • Farmville is located in Henderson County
  • Hollow Rock
    (9 miles [14.5 km] to the northeast)
  • Spain ‑ Historic
    (11 miles [17.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Spain have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spain
    • Spain is located in Henderson County
  • Morgan ‑ Historic
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Morgan have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Morgan
    • Morgan is located in Henderson County
  • Holladay
    (12 miles [19.3 km] to the east)
    • Note: The GPS coordinates that we are using for Holladay have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Holladay
    • Holladay is located in Benton County
    • Jump to TripAdvisor's Tourism page for Holladay <2>
  • Continue List   (13 more) ...
    • Lipe
      (12 miles [19.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Lipe have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lipe
      • Lipe is located in Benton County
    • Carnsville ‑ Historic
      (12 miles [19.3 km] to the north)
      • Note: The GPS coordinates that we are using for Carnsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Carnsville
      • Carnsville is located in Carroll County
    • McLemoresville
      (12 miles [19.3 km] to the west)

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Concord. See our List of 1890's Communities around Concord.

Newspapers Published in Concord ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 44 newspapers that have been published in the area around Concord.

Although we're unaware of any newspapers that were published in the immediate area of Concord, there are papers which were published within 21 miles [33.8 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Concord.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Concord:

Unfortunately, we don't know of a website for Concord. If you can help, please contact us through our Feedback Page.

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Concord, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Concord) to Point B.Our distance measurements begin at a specific point in Concord. The point we use is located at these GPS coordinates - Latitude: 35.9290, Longitude: -88.3660    









 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025