Nearest Communities to Ramsey,
Listed County-By-County
The purpose of this page is to identify those communities that are closest to Ramsey, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Ramsey:
We have great-grandparents who lived in a small community in the northeast corner of their home county. During their lives, most hospitals and doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.
When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.
Please note that when we give a distance, it's a 'straight-line' distance.<1>
If you're researching your genealogy, we hope that the following information helps.
Ramsey is located in Lycoming County.
The following 9 counties adjoin and form the boundaries of Lycoming County: Bradford, Clinton, Columbia, Montour, Northumberland, Potter, Sullivan, Tioga & Union.
Our Gazetteer shows that there are 294 communities within 40 miles [64.4 km]<1> of Ramsey. Of these communities, 186 are located in counties other than Lycoming County.
We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.
After starting with the home county for Ramsey (which is Lycoming County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Ramsey
For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.
- Lycoming County (where Ramsey resides)
- Given the large number of communities that are located in Lycoming County, we have limited the list to those within 30 miles [48.3 km]<1> of Ramsey (about 100 communities).
- County Website: www.lyco.org/
- County Seat for Lycoming: Williamsport
- Genealogy Websites ...
- From Cyndi's List:
- Commonwealth of Pennsylvania
- Lycoming County
- From Family Search:
- Commonwealth of Pennsylvania
- Lycoming County
- From Genealogy Trails:
- Commonwealth of Pennsylvania
- Lycoming County
- Nearest Communities to Ramsey ...
- These communities are listed by their distance from Ramsey.
- Waterville
(2 miles [3.2 km] to the northwest)- Note: The GPS coordinates that we are using for Waterville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waterville
- Waterville is located in Lycoming County
- Jump to TripAdvisor's Tourism page for Waterville <4>
- Tomb
(2 miles [3.2 km] to the south) - Tombs Run
(2 miles [3.2 km] to the south) - East Hill
(4 miles [6.4 km] to the north) - English Mills
(4 miles [6.4 km] to the north)- Note: We haven't been able to verify our GPS coordinates for English Mills. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for English Mills
- English Mills is located in Lycoming County
- Google driving directions:
- From your current location to English Mills
- From Ramsey to English Mills
- Torbert
(4 miles [6.4 km] to the south) - Salladasburg
(5 miles [8 km] to the east)- Jump to our Gazetteer entry for Salladasburg
- Salladasburg is located in Lycoming County
- Population from the 2020 Census: 223 people
- Google driving directions:
- From your current location to Salladasburg
- From Ramsey to Salladasburg
- Jersey Mills
(6 miles [9.7 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Jersey Mills. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Jersey Mills
- Jersey Mills is located in Lycoming County
- Jump to TripAdvisor's Tourism page for Jersey Mills <4>
- Google driving directions:
- From your current location to Jersey Mills
- From Ramsey to Jersey Mills
- Larryville
(6 miles [9.7 km] to the southeast)- Note: The GPS coordinates that we are using for Larryville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Larryville
- Larryville is located in Lycoming County
- Hughesville
(7 miles [11.3 km] to the east)- Note: The GPS coordinates that we are using for Hughesville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hughesville
- Hughesville is located in Lycoming County
- Population from the 2020 Census: 2,024 people
- Jump to TripAdvisor's Tourism page for Hughesville <4>
- Larrys Creek
(7 miles [11.3 km] to the southeast)- Note: The GPS coordinates that we are using for Larrys Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Larrys Creek
- Larrys Creek is located in Lycoming County
- Pine Run
(8 miles [12.9 km] to the east) - Continue List (96 more) ...
- Carsontown
(8 miles [12.9 km] to the north)- Jump to our Gazetteer entry for Carsontown
- Carsontown is located in Lycoming County
- Google driving directions:
- From your current location to Carsontown
- From Ramsey to Carsontown
- Brookside
(8 miles [12.9 km] to the northeast)- Note: We haven't been able to verify our GPS coordinates for Brookside. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Brookside
- Brookside is located in Lycoming County
- Google driving directions:
- From your current location to Brookside
- From Ramsey to Brookside
- Jersey Shore
(8 miles [12.9 km] to the northeast)- Note: The GPS coordinates that we are using for Jersey Shore have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jersey Shore
- Jersey Shore is located in Lycoming County
- Population from the 2020 Census: 4,132 people
- Jump to TripAdvisor's Tourism page for Jersey Shore <4>
- Bluestone
(8 miles [12.9 km] to the northwest) - Antes Fort
(8 miles [12.9 km] to the southeast)- Note: We haven't been able to verify our GPS coordinates for Antes Fort. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Antes Fort
- Antes Fort is located in Lycoming County
- Google driving directions:
- From your current location to Antes Fort
- From Ramsey to Antes Fort
- Montgomery
(9 miles [14.5 km] to the northeast)- Note: The GPS coordinates that we are using for Montgomery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montgomery
- Montgomery is located in Lycoming County
- Population from the 2020 Census: 1,502 people
- Jump to TripAdvisor's Tourism page for Montgomery <4>
- Level Corner
(9 miles [14.5 km] to the southeast)- Note: The GPS coordinates that we are using for Level Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Level Corner
- Level Corner is located in Lycoming County
- Nippono Park ‑ Historic
(9 miles [14.5 km] to the southeast)- Note: The GPS coordinates that we are using for Nippono Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nippono Park
- Nippono Park is located in Lycoming County
- Linden
(10 miles [16.1 km] to the east)- Jump to our Gazetteer entry for Linden
- Linden is located in Lycoming County
- Jump to TripAdvisor's Tourism page for Linden <4>
- Google driving directions:
- From your current location to Linden
- From Ramsey to Linden
- English Center
(10 miles [16.1 km] to the north)- Note: The GPS coordinates that we are using for English Center have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for English Center
- English Center is located in Lycoming County
- White Pine
(10 miles [16.1 km] to the northeast)- Note: We haven't been able to verify our GPS coordinates for White Pine. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for White Pine
- White Pine is located in Lycoming County
- Google driving directions:
- From your current location to White Pine
- From Ramsey to White Pine
- Cammal
(10 miles [16.1 km] to the northwest) - Lebo Vista
(10 miles [16.1 km] to the northwest)- Note: The GPS coordinates that we are using for Lebo Vista have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lebo Vista
- Lebo Vista is located in Lycoming County
- Glosser View
(11 miles [17.7 km] to the east)- Note: The GPS coordinates that we are using for Glosser View have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glosser View
- Glosser View is located in Lycoming County
- Nisbet
(11 miles [17.7 km] to the east) - Perryville
(11 miles [17.7 km] to the east)- Note: The GPS coordinates that we are using for Perryville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Perryville
- Perryville is located in Lycoming County
- Picture Rocks
(11 miles [17.7 km] to the east)- Note: The GPS coordinates that we are using for Picture Rocks have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Picture Rocks
- Picture Rocks is located in Lycoming County
- Population from the 2020 Census: 643 people
- Quiggleville
(11 miles [17.7 km] to the east)- Note: The GPS coordinates that we are using for Quiggleville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Quiggleville
- Quiggleville is located in Lycoming County
- Steuben
(11 miles [17.7 km] to the northeast) - Okome
(11 miles [17.7 km] to the northwest) - Oriole
(11 miles [17.7 km] to the southeast) - Haleeka
(12 miles [19.3 km] to the east) - Powys
(12 miles [19.3 km] to the east) - Lucullus
(12 miles [19.3 km] to the northwest) - Bastress
(12 miles [19.3 km] to the southeast) - Oval
(12 miles [19.3 km] to the southeast) - Fairlawn
(13 miles [20.9 km] to the east)- Jump to our Gazetteer entry for Fairlawn
- Fairlawn is located in Lycoming County
- Google driving directions:
- From your current location to Fairlawn
- From Ramsey to Fairlawn
- Grimesville
(13 miles [20.9 km] to the east)- Jump to our Gazetteer entry for Grimesville
- Grimesville is located in Lycoming County
- Google driving directions:
- From your current location to Grimesville
- From Ramsey to Grimesville
- Hepburn Heights
(13 miles [20.9 km] to the east)- Note: The GPS coordinates that we are using for Hepburn Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hepburn Heights
- Hepburn Heights is located in Lycoming County
- Hepburnville
(13 miles [20.9 km] to the east)- Note: The GPS coordinates that we are using for Hepburnville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hepburnville
- Hepburnville is located in Lycoming County
- Heshbon Park
(13 miles [20.9 km] to the east)- Note: The GPS coordinates that we are using for Heshbon Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Heshbon Park
- Heshbon Park is located in Lycoming County
- Woodland Park
(13 miles [20.9 km] to the east)- Note: The GPS coordinates that we are using for Woodland Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodland Park
- Woodland Park is located in Lycoming County
- Beech Grove
(13 miles [20.9 km] to the northeast)- Note: The GPS coordinates that we are using for Beech Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beech Grove
- Beech Grove is located in Lycoming County
- Collomsville
(13 miles [20.9 km] to the southeast)- Note: We haven't been able to verify our GPS coordinates for Collomsville. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Collomsville
- Collomsville is located in Lycoming County
- Google driving directions:
- From your current location to Collomsville
- From Ramsey to Collomsville
- Garden View
(14 miles [22.5 km] to the east)- Note: The GPS coordinates that we are using for Garden View have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Garden View
- Garden View is located in Lycoming County
- Newberry
(14 miles [22.5 km] to the east)- Note: We haven't been able to verify our GPS coordinates for Newberry. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Newberry
- Newberry is located in Lycoming County
- Google driving directions:
- From your current location to Newberry
- From Ramsey to Newberry
- West Hills Estates
(14 miles [22.5 km] to the east)- Note: The GPS coordinates that we are using for West Hills Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Hills Estates
- West Hills Estates is located in Lycoming County
- Beulah Land
(14 miles [22.5 km] to the northwest)- Note: The GPS coordinates that we are using for Beulah Land have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beulah Land
- Beulah Land is located in Lycoming County
- Balls Mills
(15 miles [24.1 km] to the east)- Note: The GPS coordinates that we are using for Balls Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Balls Mills
- Balls Mills is located in Lycoming County
- Duboistown
(15 miles [24.1 km] to the east)- Note: The GPS coordinates that we are using for Duboistown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Duboistown
- Duboistown is located in Lycoming County
- Population from the 2020 Census: 1,170 people
- Vallamont Hills
(15 miles [24.1 km] to the east)- Note: The GPS coordinates that we are using for Vallamont Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vallamont Hills
- Vallamont Hills is located in Lycoming County
- Steam Valley
(15 miles [24.1 km] to the northeast)- Note: The GPS coordinates that we are using for Steam Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Steam Valley
- Steam Valley is located in Lycoming County
- Trout Run
(15 miles [24.1 km] to the northeast)- Note: The GPS coordinates that we are using for Trout Run have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trout Run
- Trout Run is located in Lycoming County
- Jump to TripAdvisor's Tourism page for Trout Run <4>
- Slate Run
(15 miles [24.1 km] to the northwest)- Note: The GPS coordinates that we are using for Slate Run have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Slate Run
- Slate Run is located in Lycoming County
- Jump to TripAdvisor's Tourism page for Slate Run <4>
- French Settlement
(16 miles [25.7 km] to the east)- Note: The GPS coordinates that we are using for French Settlement have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for French Settlement
- French Settlement is located in Lycoming County
- Grampian Hills
(16 miles [25.7 km] to the east)- Note: The GPS coordinates that we are using for Grampian Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grampian Hills
- Grampian Hills is located in Lycoming County
- Williamsport
(16 miles [25.7 km] to the east)- Jump to our Gazetteer entry for Williamsport
- Williamsport is located in Lycoming County
- Population from the 2020 Census: 28,156 people
- Jump to TripAdvisor's Tourism page for Williamsport <4>
- Google driving directions:
- From your current location to Williamsport
- From Ramsey to Williamsport
- Oregon Hill
(16 miles [25.7 km] to the north)- Jump to our Gazetteer entry for Oregon Hill
- Oregon Hill is located in Lycoming County
- Google driving directions:
- From your current location to Oregon Hill
- From Ramsey to Oregon Hill
- Caldwell
(16 miles [25.7 km] to the northeast) - Cedar Pines
(16 miles [25.7 km] to the northwest)- Note: The GPS coordinates that we are using for Cedar Pines have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Pines
- Cedar Pines is located in Lycoming County
- Hilborn
(16 miles [25.7 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Hilborn. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Hilborn
- Hilborn is located in Lycoming County
- Google driving directions:
- From your current location to Hilborn
- From Ramsey to Hilborn
- South Williamsport
(17 miles [27.4 km] to the east)- Jump to our Gazetteer entry for South Williamsport
- South Williamsport is located in Lycoming County
- Population from the 2020 Census: 6,064 people
- Jump to TripAdvisor's Tourism page for South Williamsport <4>
- Google driving directions:
- From your current location to South Williamsport
- From Ramsey to South Williamsport
- Cedar Run
(17 miles [27.4 km] to the north)- Note: The GPS coordinates that we are using for Cedar Run have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Run
- Cedar Run is located in Lycoming County
- Jump to TripAdvisor's Tourism page for Cedar Run <4>
- Texas
(17 miles [27.4 km] to the north) - Buttonwood
(17 miles [27.4 km] to the northeast)- Note: The GPS coordinates that we are using for Buttonwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buttonwood
- Buttonwood is located in Lycoming County
- Allens
(18 miles [29 km] to the east) - Faxon
(18 miles [29 km] to the east)- Jump to our Gazetteer entry for Faxon
- Faxon is located in Lycoming County
- Google driving directions:
- From your current location to Faxon
- From Ramsey to Faxon
- North Eldred
(18 miles [29 km] to the east)- Note: The GPS coordinates that we are using for North Eldred have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Eldred
- North Eldred is located in Lycoming County
- Pennvale
(18 miles [29 km] to the east) - Lorenton
(18 miles [29 km] to the north)- Jump to our Gazetteer entry for Lorenton
- Lorenton is located in Lycoming County
- Google driving directions:
- From your current location to Lorenton
- From Ramsey to Lorenton
- Gray
(18 miles [29 km] to the northeast) - Kenmar
(19 miles [30.6 km] to the east) - Lymehurst
(19 miles [30.6 km] to the east) - Warrensville
(19 miles [30.6 km] to the east)- Jump to our Gazetteer entry for Warrensville
- Warrensville is located in Lycoming County
- Google driving directions:
- From your current location to Warrensville
- From Ramsey to Warrensville
- Elimsport
(19 miles [30.6 km] to the southeast) - Maple Hill
(20 miles [32.2 km] to the east)- Note: We haven't been able to verify our GPS coordinates for Maple Hill. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Maple Hill
- Maple Hill is located in Lycoming County
- Google driving directions:
- From your current location to Maple Hill
- From Ramsey to Maple Hill
- Sylvan Dell
(20 miles [32.2 km] to the east)- Note: The GPS coordinates that we are using for Sylvan Dell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sylvan Dell
- Sylvan Dell is located in Lycoming County
- Calvert
(20 miles [32.2 km] to the northeast) - Farragut
(21 miles [33.8 km] to the east) - Loyalsockville
(21 miles [33.8 km] to the east)- Note: The GPS coordinates that we are using for Loyalsockville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loyalsockville
- Loyalsockville is located in Lycoming County
- Montoursville
(21 miles [33.8 km] to the east)- Note: The GPS coordinates that we are using for Montoursville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montoursville
- Montoursville is located in Lycoming County
- Population from the 2020 Census: 4,393 people
- Jump to TripAdvisor's Tourism page for Montoursville <4>
- Bodines
(21 miles [33.8 km] to the northeast) - Butternut Grove
(22 miles [35.4 km] to the east)- Note: The GPS coordinates that we are using for Butternut Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Butternut Grove
- Butternut Grove is located in Lycoming County
- Loyalsock ‑ Historic
(22 miles [35.4 km] to the east) - Marsh Hill
(22 miles [35.4 km] to the northeast)- Note: The GPS coordinates that we are using for Marsh Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marsh Hill
- Marsh Hill is located in Lycoming County
- Bella Vista
(23 miles [37 km] to the east)- Note: The GPS coordinates that we are using for Bella Vista have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bella Vista
- Bella Vista is located in Lycoming County
- Ralston
(24 miles [38.6 km] to the northeast)- Jump to our Gazetteer entry for Ralston
- Ralston is located in Lycoming County
- Google driving directions:
- From your current location to Ralston
- From Ramsey to Ralston
- Fritz ‑ Historic
(24 miles [38.6 km] to the southeast) - Wallis Run
(25 miles [40.2 km] to the east)- Note: We haven't been able to verify our GPS coordinates for Wallis Run. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Wallis Run
- Wallis Run is located in Lycoming County
- Google driving directions:
- From your current location to Wallis Run
- From Ramsey to Wallis Run
- Kellyburg
(25 miles [40.2 km] to the northeast) - Langdon
(25 miles [40.2 km] to the northeast) - Dewey Corner
(26 miles [41.8 km] to the east)- Note: The GPS coordinates that we are using for Dewey Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dewey Corner
- Dewey Corner is located in Lycoming County
- Saegers
(26 miles [41.8 km] to the east) - Muncy Station
(27 miles [43.5 km] to the east)- Note: The GPS coordinates that we are using for Muncy Station have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Muncy Station
- Muncy Station is located in Lycoming County
- Muncy
(27 miles [43.5 km] to the east) - Pennsdale
(27 miles [43.5 km] to the east) - Roaring Branch
(27 miles [43.5 km] to the northeast)- Note: The GPS coordinates that we are using for Roaring Branch have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roaring Branch
- Roaring Branch is located in Lycoming County
- Barbours
(28 miles [45.1 km] to the east) - Chippewa
(28 miles [45.1 km] to the east) - Muncy
(28 miles [45.1 km] to the east)- Jump to our Gazetteer entry for Muncy
- Muncy is located in Lycoming County
- Population from the 2020 Census: 2,406 people
- Jump to TripAdvisor's Tourism page for Muncy <4>
- Google driving directions:
- From your current location to Muncy
- From Ramsey to Muncy
- Proctor
(28 miles [45.1 km] to the east)- Jump to our Gazetteer entry for Proctor
- Proctor is located in Lycoming County
- Google driving directions:
- From your current location to Proctor
- From Ramsey to Proctor
- Huntersville
(29 miles [46.7 km] to the east)- Note: The GPS coordinates that we are using for Huntersville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Huntersville
- Huntersville is located in Lycoming County
- Lime Bluff
(29 miles [46.7 km] to the east)- Note: The GPS coordinates that we are using for Lime Bluff have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lime Bluff
- Lime Bluff is located in Lycoming County
- Hoppestown
(30 miles [48.3 km] to the east)- Note: The GPS coordinates that we are using for Hoppestown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hoppestown
- Hoppestown is located in Lycoming County
- Leolyn
(30 miles [48.3 km] to the northeast) - Masten
(30 miles [48.3 km] to the northeast)
- Carsontown
- Centre County
- County Seat for Centre: Bellefonte
- Genealogy Websites ...
- From Cyndi's List:
- Commonwealth of Pennsylvania
- Centre County
- From Family Search:
- Commonwealth of Pennsylvania
- Centre County
- From Genealogy Trails:
- Commonwealth of Pennsylvania
- Centre County
- Nearest Communities to Ramsey ...
- These communities are listed by their distance from Ramsey.
- Shakespeare Club
(20 miles [32.2 km] to the southeast)- Note: The GPS coordinates that we are using for Shakespeare Club have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shakespeare Club
- Shakespeare Club is located in Centre County
- Blanchard
(20 miles [32.2 km] to the southwest) - West Beech
(20 miles [32.2 km] to the southwest)- Note: The GPS coordinates that we are using for West Beech have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Beech
- West Beech is located in Centre County
- Livonia
(21 miles [33.8 km] to the south)- Note: We haven't been able to verify our GPS coordinates for Livonia. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Livonia
- Livonia is located in Centre County
- Google driving directions:
- From your current location to Livonia
- From Ramsey to Livonia
- Eagleville
(21 miles [33.8 km] to the southwest)- Note: The GPS coordinates that we are using for Eagleville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eagleville
- Eagleville is located in Centre County
- Wolfs Store
(22 miles [35.4 km] to the south)- Note: The GPS coordinates that we are using for Wolfs Store have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wolfs Store
- Wolfs Store is located in Centre County
- Big Run
(22 miles [35.4 km] to the southwest) - Monument
(23 miles [37 km] to the southwest) - Nittany
(23 miles [37 km] to the southwest) - Rebersburg
(24 miles [38.6 km] to the south)- Jump to our Gazetteer entry for Rebersburg
- Rebersburg is located in Centre County
- Jump to TripAdvisor's Tourism page for Rebersburg <4>
- Google driving directions:
- From your current location to Rebersburg
- From Ramsey to Rebersburg
- Rockville
(24 miles [38.6 km] to the south) - Smullton
(24 miles [38.6 km] to the south) - Continue List (19 more) ...
- Romola
(24 miles [38.6 km] to the southwest)- Note: We haven't been able to verify our GPS coordinates for Romola. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Romola
- Romola is located in Centre County
- Google driving directions:
- From your current location to Romola
- From Ramsey to Romola
- Snydertown
(24 miles [38.6 km] to the southwest)- Note: The GPS coordinates that we are using for Snydertown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Snydertown
- Snydertown is located in Centre County
- Howard
(25 miles [40.2 km] to the southwest)- Note: The GPS coordinates that we are using for Howard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howard
- Howard is located in Centre County
- Population from the 2020 Census: 728 people
- Jump to TripAdvisor's Tourism page for Howard <4>
- Jacksonville
(25 miles [40.2 km] to the southwest)- Jump to our Gazetteer entry for Jacksonville
- Jacksonville is located in Centre County
- Google driving directions:
- From your current location to Jacksonville
- From Ramsey to Jacksonville
- Orviston
(25 miles [40.2 km] to the southwest) - Fiedler
(26 miles [41.8 km] to the south) - Madisonburg
(26 miles [41.8 km] to the south)- Note: The GPS coordinates that we are using for Madisonburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Madisonburg
- Madisonburg is located in Centre County
- Spring Bank
(26 miles [41.8 km] to the south)- Note: The GPS coordinates that we are using for Spring Bank have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Bank
- Spring Bank is located in Centre County
- Woodward
(26 miles [41.8 km] to the south)- Jump to our Gazetteer entry for Woodward
- Woodward is located in Centre County
- Jump to TripAdvisor's Tourism page for Woodward <4>
- Google driving directions:
- From your current location to Woodward
- From Ramsey to Woodward
- Hublersburg
(26 miles [41.8 km] to the southwest)- Note: The GPS coordinates that we are using for Hublersburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hublersburg
- Hublersburg is located in Centre County
- Aaronsburg
(27 miles [43.5 km] to the south)- Note: The GPS coordinates that we are using for Aaronsburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Aaronsburg
- Aaronsburg is located in Centre County
- Jump to TripAdvisor's Tourism page for Aaronsburg <4>
- Millheim
(28 miles [45.1 km] to the south)- Note: The GPS coordinates that we are using for Millheim have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millheim
- Millheim is located in Centre County
- Population from the 2020 Census: 876 people
- Jump to TripAdvisor's Tourism page for Millheim <4>
- Mount Eagle
(28 miles [45.1 km] to the southwest)- Note: The GPS coordinates that we are using for Mount Eagle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Eagle
- Mount Eagle is located in Centre County
- Coburn
(29 miles [46.7 km] to the south)- Jump to our Gazetteer entry for Coburn
- Coburn is located in Centre County
- Jump to TripAdvisor's Tourism page for Coburn <4>
- Google driving directions:
- From your current location to Coburn
- From Ramsey to Coburn
- Mingoville
(29 miles [46.7 km] to the southwest)- Note: The GPS coordinates that we are using for Mingoville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mingoville
- Mingoville is located in Centre County
- Green Grove
(30 miles [48.3 km] to the south)- Note: The GPS coordinates that we are using for Green Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Green Grove
- Green Grove is located in Centre County
- Ingleby
(30 miles [48.3 km] to the south)- Jump to our Gazetteer entry for Ingleby
- Ingleby is located in Centre County
- Google driving directions:
- From your current location to Ingleby
- From Ramsey to Ingleby
- Penn View
(30 miles [48.3 km] to the south) - Curtin
(30 miles [48.3 km] to the southwest)- Note: We haven't been able to verify our GPS coordinates for Curtin. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Curtin
- Curtin is located in Centre County
- Google driving directions:
- From your current location to Curtin
- From Ramsey to Curtin
- Romola
- Clinton County
- County Website: www.clintoncountypa.com/
- County Seat for Clinton: Lock Haven
- Genealogy Websites ...
- From Cyndi's List:
- Commonwealth of Pennsylvania
- Clinton County
- From Family Search:
- Commonwealth of Pennsylvania
- Clinton County
- From Genealogy Trails:
- Commonwealth of Pennsylvania
- Clinton County
- Nearest Communities to Ramsey ...
- These communities are listed by their distance from Ramsey.
- Avis
(6 miles [9.7 km] to the south)- Note: The GPS coordinates that we are using for Avis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Avis
- Avis is located in Clinton County
- Population from the 2020 Census: 1,476 people
- Jump to TripAdvisor's Tourism page for Avis <4>
- Woolrich
(6 miles [9.7 km] to the southwest) - Gallagher
(6 miles [9.7 km] to the west) - Charlton
(7 miles [11.3 km] to the south) - Crestmont
(7 miles [11.3 km] to the south) - Chatham Run
(8 miles [12.9 km] to the south)- Note: The GPS coordinates that we are using for Chatham Run have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chatham Run
- Chatham Run is located in Clinton County
- McElhattan
(8 miles [12.9 km] to the south)- Jump to our Gazetteer entry for McElhattan
- McElhattan is located in Clinton County
- Jump to TripAdvisor's Tourism page for McElhattan <4>
- Google driving directions:
- From your current location to McElhattan
- From Ramsey to McElhattan
- Pine
(8 miles [12.9 km] to the south) - Haneyville
(8 miles [12.9 km] to the west)- Note: The GPS coordinates that we are using for Haneyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haneyville
- Haneyville is located in Clinton County
- Youngdale
(9 miles [14.5 km] to the south)- Jump to our Gazetteer entry for Youngdale
- Youngdale is located in Clinton County
- Google driving directions:
- From your current location to Youngdale
- From Ramsey to Youngdale
- Swissdale
(9 miles [14.5 km] to the southwest) - Dunnstown
(10 miles [16.1 km] to the southwest) - Continue List (54 more) ...
- Queens Run
(10 miles [16.1 km] to the southwest)- Note: The GPS coordinates that we are using for Queens Run have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Queens Run
- Queens Run is located in Clinton County
- Lockport
(11 miles [17.7 km] to the southwest) - Rauchtown
(12 miles [19.3 km] to the southeast)- Jump to our Gazetteer entry for Rauchtown
- Rauchtown is located in Clinton County
- Google driving directions:
- From your current location to Rauchtown
- From Ramsey to Rauchtown
- Castanea
(12 miles [19.3 km] to the southwest)- Jump to our Gazetteer entry for Castanea
- Castanea is located in Clinton County
- Jump to TripAdvisor's Tourism page for Castanea <4>
- Google driving directions:
- From your current location to Castanea
- From Ramsey to Castanea
- Farrandsville
(12 miles [19.3 km] to the southwest)- Note: We haven't been able to verify our GPS coordinates for Farrandsville. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Farrandsville
- Farrandsville is located in Clinton County
- Google driving directions:
- From your current location to Farrandsville
- From Ramsey to Farrandsville
- Lock Haven
(12 miles [19.3 km] to the southwest)- Jump to our Gazetteer entry for Lock Haven
- Lock Haven is located in Clinton County
- Population from the 2020 Census: 8,694 people
- Jump to TripAdvisor's Tourism page for Lock Haven <4>
- Google driving directions:
- From your current location to Lock Haven
- From Ramsey to Lock Haven
- Riverview
(12 miles [19.3 km] to the southwest) - Sunset Pines
(12 miles [19.3 km] to the southwest)- Note: The GPS coordinates that we are using for Sunset Pines have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sunset Pines
- Sunset Pines is located in Clinton County
- Castle Rocks
(13 miles [20.9 km] to the south)- Note: The GPS coordinates that we are using for Castle Rocks have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Castle Rocks
- Castle Rocks is located in Clinton County
- East Ferney
(13 miles [20.9 km] to the southwest)- Note: The GPS coordinates that we are using for East Ferney have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Ferney
- East Ferney is located in Clinton County
- Flemington
(13 miles [20.9 km] to the southwest)- Note: The GPS coordinates that we are using for Flemington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flemington
- Flemington is located in Clinton County
- Population from the 2020 Census: 1,312 people
- Ferney
(13 miles [20.9 km] to the west) - Whetham
(13 miles [20.9 km] to the west) - Draketown
(14 miles [22.5 km] to the southwest) - Mill Hall
(14 miles [22.5 km] to the southwest)- Note: The GPS coordinates that we are using for Mill Hall have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mill Hall
- Mill Hall is located in Clinton County
- Population from the 2020 Census: 1,586 people
- Jump to TripAdvisor's Tourism page for Mill Hall <4>
- Glen Union
(14 miles [22.5 km] to the west)- Note: The GPS coordinates that we are using for Glen Union have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glen Union
- Glen Union is located in Clinton County
- Ritchie
(14 miles [22.5 km] to the west) - Rosecrans
(15 miles [24.1 km] to the south) - Rote
(15 miles [24.1 km] to the south)- Note: We haven't been able to verify our GPS coordinates for Rote. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Rote
- Rote is located in Clinton County
- Google driving directions:
- From your current location to Rote
- From Ramsey to Rote
- Salona
(15 miles [24.1 km] to the southwest)- Jump to our Gazetteer entry for Salona
- Salona is located in Clinton County
- Google driving directions:
- From your current location to Salona
- From Ramsey to Salona
- Hyner View
(15 miles [24.1 km] to the west)- Note: The GPS coordinates that we are using for Hyner View have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hyner View
- Hyner View is located in Clinton County
- Beech Creek
(16 miles [25.7 km] to the southwest)- Note: The GPS coordinates that we are using for Beech Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beech Creek
- Beech Creek is located in Clinton County
- Population from the 2020 Census: 685 people
- Jump to TripAdvisor's Tourism page for Beech Creek <4>
- Cedar Springs
(16 miles [25.7 km] to the southwest)- Note: We haven't been able to verify our GPS coordinates for Cedar Springs. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Cedar Springs
- Cedar Springs is located in Clinton County
- Google driving directions:
- From your current location to Cedar Springs
- From Ramsey to Cedar Springs
- Hyner
(16 miles [25.7 km] to the west) - Carroll
(17 miles [27.4 km] to the south) - Eastville
(17 miles [27.4 km] to the south) - Loganton
(17 miles [27.4 km] to the south)- Note: The GPS coordinates that we are using for Loganton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loganton
- Loganton is located in Clinton County
- Population from the 2020 Census: 475 people
- Jump to TripAdvisor's Tourism page for Loganton <4>
- Schracktown
(17 miles [27.4 km] to the south)- Note: The GPS coordinates that we are using for Schracktown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Schracktown
- Schracktown is located in Clinton County
- Mackeyville
(17 miles [27.4 km] to the southwest)- Note: The GPS coordinates that we are using for Mackeyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mackeyville
- Mackeyville is located in Clinton County
- Eagleton Fields
(17 miles [27.4 km] to the west)- Note: The GPS coordinates that we are using for Eagleton Fields have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eagleton Fields
- Eagleton Fields is located in Clinton County
- Booneville
(18 miles [29 km] to the south)- Note: The GPS coordinates that we are using for Booneville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Booneville
- Booneville is located in Clinton County
- East Beech
(18 miles [29 km] to the southwest)- Note: The GPS coordinates that we are using for East Beech have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Beech
- East Beech is located in Clinton County
- Parvin
(18 miles [29 km] to the southwest) - Greenburr
(19 miles [30.6 km] to the south)- Jump to our Gazetteer entry for Greenburr
- Greenburr is located in Clinton County
- Google driving directions:
- From your current location to Greenburr
- From Ramsey to Greenburr
- Logan Mills
(19 miles [30.6 km] to the south)- Note: The GPS coordinates that we are using for Logan Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Logan Mills
- Logan Mills is located in Clinton County
- Bear Swamp
(19 miles [30.6 km] to the southwest)- Note: The GPS coordinates that we are using for Bear Swamp have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bear Swamp
- Bear Swamp is located in Clinton County
- Tylersville
(20 miles [32.2 km] to the south)- Jump to our Gazetteer entry for Tylersville
- Tylersville is located in Clinton County
- Google driving directions:
- From your current location to Tylersville
- From Ramsey to Tylersville
- Farwell
(20 miles [32.2 km] to the west)- Jump to our Gazetteer entry for Farwell
- Farwell is located in Clinton County
- Google driving directions:
- From your current location to Farwell
- From Ramsey to Farwell
- Gleasonton
(20 miles [32.2 km] to the west)- Note: The GPS coordinates that we are using for Gleasonton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gleasonton
- Gleasonton is located in Clinton County
- North Bend
(20 miles [32.2 km] to the west)- Jump to our Gazetteer entry for North Bend
- North Bend is located in Clinton County
- Jump to TripAdvisor's Tourism page for North Bend <4>
- Google driving directions:
- From your current location to North Bend
- From Ramsey to North Bend
- Abdera
(21 miles [33.8 km] to the southwest)- Jump to our Gazetteer entry for Abdera
- Abdera is located in Clinton County
- Google driving directions:
- From your current location to Abdera
- From Ramsey to Abdera
- Clintondale
(21 miles [33.8 km] to the southwest)- Note: The GPS coordinates that we are using for Clintondale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clintondale
- Clintondale is located in Clinton County
- Lamar
(21 miles [33.8 km] to the southwest)- Jump to our Gazetteer entry for Lamar
- Lamar is located in Clinton County
- Jump to TripAdvisor's Tourism page for Lamar <4>
- Google driving directions:
- From your current location to Lamar
- From Ramsey to Lamar
- South Renovo
(21 miles [33.8 km] to the west)- Note: The GPS coordinates that we are using for South Renovo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Renovo
- South Renovo is located in Clinton County
- Population from the 2020 Census: 422 people
- Renovo
(22 miles [35.4 km] to the west)- Jump to our Gazetteer entry for Renovo
- Renovo is located in Clinton County
- Population from the 2020 Census: 1,191 people
- Jump to TripAdvisor's Tourism page for Renovo <4>
- Google driving directions:
- From your current location to Renovo
- From Ramsey to Renovo
- Drury Run
(23 miles [37 km] to the west) - West Renovo
(23 miles [37 km] to the west)- Note: The GPS coordinates that we are using for West Renovo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Renovo
- West Renovo is located in Clinton County
- Shintown
(24 miles [38.6 km] to the west) - Westport
(26 miles [41.8 km] to the west)- Jump to our Gazetteer entry for Westport
- Westport is located in Clinton County
- Jump to TripAdvisor's Tourism page for Westport <4>
- Google driving directions:
- From your current location to Westport
- From Ramsey to Westport
- Bitumen
(28 miles [45.1 km] to the west)- Jump to our Gazetteer entry for Bitumen
- Bitumen is located in Clinton County
- Google driving directions:
- From your current location to Bitumen
- From Ramsey to Bitumen
- Cooks Run
(28 miles [45.1 km] to the west)- Note: We haven't been able to verify our GPS coordinates for Cooks Run. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Cooks Run
- Cooks Run is located in Clinton County
- Google driving directions:
- From your current location to Cooks Run
- From Ramsey to Cooks Run
- Tamarack
(28 miles [45.1 km] to the west) - Panther
(29 miles [46.7 km] to the southwest) - Keating
(30 miles [48.3 km] to the west)- Note: We haven't been able to verify our GPS coordinates for Keating. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Keating
- Keating is located in Clinton County
- Google driving directions:
- From your current location to Keating
- From Ramsey to Keating
- Queens Run
- Northumberland County
- County Website: www.northumberlandco.org/
- County Seat for Northumberland: Sunbury
- Genealogy Websites ...
- From Cyndi's List:
- Commonwealth of Pennsylvania
- Northumberland County
- From Family Search:
- Commonwealth of Pennsylvania
- Northumberland County
- From Genealogy Trails:
- Commonwealth of Pennsylvania
- Northumberland County
- Nearest Communities to Ramsey ...
- These communities are listed by their distance from Ramsey.
- Delaware Run
(26 miles [41.8 km] to the east)- Note: The GPS coordinates that we are using for Delaware Run have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Delaware Run
- Delaware Run is located in Northumberland County
- Dewart
(26 miles [41.8 km] to the southeast)- Jump to our Gazetteer entry for Dewart
- Dewart is located in Northumberland County
- Jump to TripAdvisor's Tourism page for Dewart <4>
- Google driving directions:
- From your current location to Dewart
- From Ramsey to Dewart
- Springtown
(27 miles [43.5 km] to the southeast)- Note: The GPS coordinates that we are using for Springtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springtown
- Springtown is located in Northumberland County
- Watsontown
(27 miles [43.5 km] to the southeast)- Jump to our Gazetteer entry for Watsontown
- Watsontown is located in Northumberland County
- Population from the 2020 Census: 2,243 people
- Jump to TripAdvisor's Tourism page for Watsontown <4>
- Google driving directions:
- From your current location to Watsontown
- From Ramsey to Watsontown
- Warrior Run
(29 miles [46.7 km] to the southeast)- Note: The GPS coordinates that we are using for Warrior Run have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Warrior Run
- Warrior Run is located in Northumberland County
- Five Points
(30 miles [48.3 km] to the east)- Note: The GPS coordinates that we are using for Five Points have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Five Points
- Five Points is located in Northumberland County
- McEwensville
(30 miles [48.3 km] to the southeast)- Jump to our Gazetteer entry for McEwensville
- McEwensville is located in Northumberland County
- Population from the 2020 Census: 273 people
- Jump to TripAdvisor's Tourism page for McEwensville <4>
- Google driving directions:
- From your current location to McEwensville
- From Ramsey to McEwensville
- North Hills
(30 miles [48.3 km] to the southeast)- Note: The GPS coordinates that we are using for North Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Hills
- North Hills is located in Northumberland County
- Potter County
- County Seat for Potter: Coudersport
- Genealogy Websites ...
- From Cyndi's List:
- Commonwealth of Pennsylvania
- Potter County
- From Family Search:
- Commonwealth of Pennsylvania
- Potter County
- From Genealogy Trails:
- Commonwealth of Pennsylvania
- Potter County
- Nearest Communities to Ramsey ...
- These communities are listed by their distance from Ramsey.
- Oleona
(27 miles [43.5 km] to the northwest) - Cross Fork
(28 miles [45.1 km] to the northwest)- Note: The GPS coordinates that we are using for Cross Fork have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cross Fork
- Cross Fork is located in Potter County
- Jump to TripAdvisor's Tourism page for Cross Fork <4>
- Gravel Lick
(29 miles [46.7 km] to the northwest)- Note: The GPS coordinates that we are using for Gravel Lick have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gravel Lick
- Gravel Lick is located in Potter County
- Germania
(30 miles [48.3 km] to the northwest)
- Tioga County
- County Seat for Tioga: Wellsboro
- Genealogy Websites ...
- From Cyndi's List:
- Commonwealth of Pennsylvania
- Tioga County
- From Family Search:
- Commonwealth of Pennsylvania
- Tioga County
- From Genealogy Trails:
- Commonwealth of Pennsylvania
- Tioga County
- Nearest Communities to Ramsey ...
- These communities are listed by their distance from Ramsey.
- Blackwell
(18 miles [29 km] to the north)- Jump to our Gazetteer entry for Blackwell
- Blackwell is located in Tioga County
- Google driving directions:
- From your current location to Blackwell
- From Ramsey to Blackwell
- Mount Pleasant
(18 miles [29 km] to the north)- Note: The GPS coordinates that we are using for Mount Pleasant have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Pleasant
- Mount Pleasant is located in Tioga County
- Doane
(19 miles [30.6 km] to the north) - Three Springs Run
(19 miles [30.6 km] to the north)- Note: The GPS coordinates that we are using for Three Springs Run have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Three Springs Run
- Three Springs Run is located in Tioga County
- Hoytville
(20 miles [32.2 km] to the north)- Jump to our Gazetteer entry for Hoytville
- Hoytville is located in Tioga County
- Google driving directions:
- From your current location to Hoytville
- From Ramsey to Hoytville
- Nauvoo
(20 miles [32.2 km] to the north) - Plank
(20 miles [32.2 km] to the north) - Hartsfield
(21 miles [33.8 km] to the north)- Jump to our Gazetteer entry for Hartsfield
- Hartsfield is located in Tioga County
- Google driving directions:
- From your current location to Hartsfield
- From Ramsey to Hartsfield
- Morris
(21 miles [33.8 km] to the north)- Jump to our Gazetteer entry for Morris
- Morris is located in Tioga County
- Jump to TripAdvisor's Tourism page for Morris <4>
- Google driving directions:
- From your current location to Morris
- From Ramsey to Morris
- Henslertown
(21 miles [33.8 km] to the northeast)- Note: The GPS coordinates that we are using for Henslertown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Henslertown
- Henslertown is located in Tioga County
- House Landing Strip
(21 miles [33.8 km] to the northeast)- Note: The GPS coordinates that we are using for House Landing Strip have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for House Landing Strip
- House Landing Strip is located in Tioga County
- Pine
(22 miles [35.4 km] to the north)- Note: We haven't been able to verify our GPS coordinates for Pine. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Pine
- Pine is located in Tioga County
- Google driving directions:
- From your current location to Pine
- From Ramsey to Pine
- Continue List (31 more) ...
- Liberty
(22 miles [35.4 km] to the northeast) - Veilstown
(22 miles [35.4 km] to the northeast) - Leetonia
(23 miles [37 km] to the northwest) - Antrim
(24 miles [38.6 km] to the north)- Note: We haven't been able to verify our GPS coordinates for Antrim. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Antrim
- Antrim is located in Tioga County
- Google driving directions:
- From your current location to Antrim
- From Ramsey to Antrim
- Sebring
(24 miles [38.6 km] to the northeast)- Note: We haven't been able to verify our GPS coordinates for Sebring. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Sebring
- Sebring is located in Tioga County
- Google driving directions:
- From your current location to Sebring
- From Ramsey to Sebring
- Draper
(25 miles [40.2 km] to the north) - Duncan
(25 miles [40.2 km] to the north) - Landrus
(25 miles [40.2 km] to the north)- Note: We haven't been able to verify our GPS coordinates for Landrus. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Landrus
- Landrus is located in Tioga County
- Google driving directions:
- From your current location to Landrus
- From Ramsey to Landrus
- Tiadaghton
(25 miles [40.2 km] to the north)- Note: The GPS coordinates that we are using for Tiadaghton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tiadaghton
- Tiadaghton is located in Tioga County
- East Point
(25 miles [40.2 km] to the northeast)- Jump to our Gazetteer entry for East Point
- East Point is located in Tioga County
- Google driving directions:
- From your current location to East Point
- From Ramsey to East Point
- South Union
(25 miles [40.2 km] to the northeast)- Note: The GPS coordinates that we are using for South Union have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Union
- South Union is located in Tioga County
- Broughton Hollow
(26 miles [41.8 km] to the north)- Note: The GPS coordinates that we are using for Broughton Hollow have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Broughton Hollow
- Broughton Hollow is located in Tioga County
- Brownlee
(26 miles [41.8 km] to the north)- Note: We haven't been able to verify our GPS coordinates for Brownlee. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Brownlee
- Brownlee is located in Tioga County
- Google driving directions:
- From your current location to Brownlee
- From Ramsey to Brownlee
- Olmsville
(26 miles [41.8 km] to the north) - Stony Fork
(26 miles [41.8 km] to the north)- Note: The GPS coordinates that we are using for Stony Fork have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stony Fork
- Stony Fork is located in Tioga County
- Kennedy
(27 miles [43.5 km] to the north) - Klondike ‑ Historic
(27 miles [43.5 km] to the north) - Arnot
(28 miles [45.1 km] to the north)- Note: The GPS coordinates that we are using for Arnot have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arnot
- Arnot is located in Tioga County
- Jump to TripAdvisor's Tourism page for Arnot <4>
- Balsam
(28 miles [45.1 km] to the north)- Note: We haven't been able to verify our GPS coordinates for Balsam. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Balsam
- Balsam is located in Tioga County
- Google driving directions:
- From your current location to Balsam
- From Ramsey to Balsam
- Coolidge Hollow
(28 miles [45.1 km] to the north)- Note: The GPS coordinates that we are using for Coolidge Hollow have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coolidge Hollow
- Coolidge Hollow is located in Tioga County
- Williard
(28 miles [45.1 km] to the north) - Maple Hill
(29 miles [46.7 km] to the north)- Note: The GPS coordinates that we are using for Maple Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maple Hill
- Maple Hill is located in Tioga County
- Roundtop
(29 miles [46.7 km] to the north) - Thumptown
(29 miles [46.7 km] to the north) - Dogtown
(29 miles [46.7 km] to the northeast) - Newelltown
(29 miles [46.7 km] to the northeast)- Note: The GPS coordinates that we are using for Newelltown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newelltown
- Newelltown is located in Tioga County
- Ogdensburg
(29 miles [46.7 km] to the northeast)- Note: We haven't been able to verify our GPS coordinates for Ogdensburg. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Ogdensburg
- Ogdensburg is located in Tioga County
- Google driving directions:
- From your current location to Ogdensburg
- From Ramsey to Ogdensburg
- Dexter
(30 miles [48.3 km] to the north) - Owassee
(30 miles [48.3 km] to the north) - Blossburg
(30 miles [48.3 km] to the northeast)- Jump to our Gazetteer entry for Blossburg
- Blossburg is located in Tioga County
- Population from the 2020 Census: 1,471 people
- Jump to TripAdvisor's Tourism page for Blossburg <4>
- Google driving directions:
- From your current location to Blossburg
- From Ramsey to Blossburg
- Union Center
(30 miles [48.3 km] to the northeast)- Note: The GPS coordinates that we are using for Union Center have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union Center
- Union Center is located in Tioga County
- Liberty
- Union County
- County Website: www.unionco.org/
- County Seat for Union: Lewisburg
- Genealogy Websites ...
- From Cyndi's List:
- Commonwealth of Pennsylvania
- Union County
- From Family Search:
- Commonwealth of Pennsylvania
- Union County
- From Genealogy Trails:
- Commonwealth of Pennsylvania
- Union County
- Nearest Communities to Ramsey ...
- These communities are listed by their distance from Ramsey.
- Alvira ‑ Historic
(21 miles [33.8 km] to the southeast)- Note: We haven't been able to verify our GPS coordinates for Alvira. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Alvira
- Alvira is located in Union County
- Former name for Alvira:
- Wisetown
- Google driving directions:
- From your current location to Alvira
- From Ramsey to Alvira
- Spring Garden
(23 miles [37 km] to the southeast)- Note: The GPS coordinates that we are using for Spring Garden have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Garden
- Spring Garden is located in Union County
- Old Furnace
(24 miles [38.6 km] to the southeast)- Note: The GPS coordinates that we are using for Old Furnace have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Furnace
- Old Furnace is located in Union County
- Allenwood
(25 miles [40.2 km] to the southeast)- Jump to our Gazetteer entry for Allenwood
- Allenwood is located in Union County
- Jump to TripAdvisor's Tourism page for Allenwood <4>
- Google driving directions:
- From your current location to Allenwood
- From Ramsey to Allenwood
- Forest Hill
(25 miles [40.2 km] to the southeast)- Note: The GPS coordinates that we are using for Forest Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forest Hill
- Forest Hill is located in Union County
- Pleasant Grove
(26 miles [41.8 km] to the southeast)- Note: The GPS coordinates that we are using for Pleasant Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Grove
- Pleasant Grove is located in Union County
- Red Bank
(26 miles [41.8 km] to the southeast)- Jump to our Gazetteer entry for Red Bank
- Red Bank is located in Union County
- Google driving directions:
- From your current location to Red Bank
- From Ramsey to Red Bank
- Tannertown
(26 miles [41.8 km] to the southeast)- Note: The GPS coordinates that we are using for Tannertown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tannertown
- Tannertown is located in Union County
- Hartleton
(27 miles [43.5 km] to the south)- Jump to our Gazetteer entry for Hartleton
- Hartleton is located in Union County
- Population from the 2020 Census: 275 people
- Google driving directions:
- From your current location to Hartleton
- From Ramsey to Hartleton
- Cowan
(27 miles [43.5 km] to the southeast) - Johnstown
(27 miles [43.5 km] to the southeast) - Kelly Crossroads
(27 miles [43.5 km] to the southeast)- Note: The GPS coordinates that we are using for Kelly Crossroads have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kelly Crossroads
- Kelly Crossroads is located in Union County
- Continue List (22 more) ...
- Mazeppa
(27 miles [43.5 km] to the southeast) - Rand
(27 miles [43.5 km] to the southeast) - White Deer
(27 miles [43.5 km] to the southeast)- Note: The GPS coordinates that we are using for White Deer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Deer
- White Deer is located in Union County
- Laurelton
(28 miles [45.1 km] to the south)- Jump to our Gazetteer entry for Laurelton
- Laurelton is located in Union County
- Google driving directions:
- From your current location to Laurelton
- From Ramsey to Laurelton
- Swengel
(28 miles [45.1 km] to the south) - Buffalo Crossroads
(28 miles [45.1 km] to the southeast)- Note: The GPS coordinates that we are using for Buffalo Crossroads have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buffalo Crossroads
- Buffalo Crossroads is located in Union County
- Cameron
(28 miles [45.1 km] to the southeast) - Kelly Point
(28 miles [45.1 km] to the southeast)- Note: The GPS coordinates that we are using for Kelly Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kelly Point
- Kelly Point is located in Union County
- Glen Iron
(29 miles [46.7 km] to the south)- Jump to our Gazetteer entry for Glen Iron
- Glen Iron is located in Union County
- Google driving directions:
- From your current location to Glen Iron
- From Ramsey to Glen Iron
- Laurel Park
(29 miles [46.7 km] to the south)- Note: The GPS coordinates that we are using for Laurel Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laurel Park
- Laurel Park is located in Union County
- Millmont
(29 miles [46.7 km] to the south)- Note: We haven't been able to verify our GPS coordinates for Millmont. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Millmont
- Millmont is located in Union County
- Jump to TripAdvisor's Tourism page for Millmont <4>
- Google driving directions:
- From your current location to Millmont
- From Ramsey to Millmont
- Pardee
(29 miles [46.7 km] to the south) - Weikert
(29 miles [46.7 km] to the south) - Mifflinburg
(29 miles [46.7 km] to the southeast)- Note: The GPS coordinates that we are using for Mifflinburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mifflinburg
- Mifflinburg is located in Union County
- Population from the 2020 Census: 3,445 people
- Jump to TripAdvisor's Tourism page for Mifflinburg <4>
- New Columbia
(29 miles [46.7 km] to the southeast)- Jump to our Gazetteer entry for New Columbia
- New Columbia is located in Union County
- Jump to TripAdvisor's Tourism page for New Columbia <4>
- Google driving directions:
- From your current location to New Columbia
- From Ramsey to New Columbia
- Vicksburg
(29 miles [46.7 km] to the southeast)- Note: The GPS coordinates that we are using for Vicksburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vicksburg
- Vicksburg is located in Union County
- Jump to TripAdvisor's Tourism page for Vicksburg <4>
- West Milton
(29 miles [46.7 km] to the southeast)- Jump to our Gazetteer entry for West Milton
- West Milton is located in Union County
- Google driving directions:
- From your current location to West Milton
- From Ramsey to West Milton
- Camp Hironimus
(30 miles [48.3 km] to the south)- Note: The GPS coordinates that we are using for Camp Hironimus have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Camp Hironimus
- Camp Hironimus is located in Union County
- Cherry Run
(30 miles [48.3 km] to the south)- Note: We haven't been able to verify our GPS coordinates for Cherry Run. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Cherry Run
- Cherry Run is located in Union County
- Google driving directions:
- From your current location to Cherry Run
- From Ramsey to Cherry Run
- Central Oak Heights
(30 miles [48.3 km] to the southeast)- Note: The GPS coordinates that we are using for Central Oak Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Central Oak Heights
- Central Oak Heights is located in Union County
- Lochiel
(30 miles [48.3 km] to the southeast) - White Springs
(30 miles [48.3 km] to the southeast)- Note: The GPS coordinates that we are using for White Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Springs
- White Springs is located in Union County
- Mazeppa
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Ramsey) to Point B.Our distance measurements begin at a specific point in Ramsey. The point we use is located at these GPS coordinates - Latitude: 41.2846, Longitude: -77.3246 In this case, the coordinates for Ramsey have been provided by the Geographic Names Information System (GNIS). |
| <2> | Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking. We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now. Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <6> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |