Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Ramsey (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Ramsey. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Ramsey is located in Lycoming County.
To see how the shape of Pennsylvania's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Lycoming County: Bradford, Clinton, Columbia, Montour, Northumberland, Potter, Sullivan, Tioga & Union.
Below are the counties that are near Ramsey. For each of these counties, we show a sample of those communities that are closest to Ramsey:
- Lycoming County (The home county of Ramsey)
- The following are listed by their distance from Ramsey, with the one closest to Ramsey listed first.
- English Mills
(4 miles [6.4 km] to the north)
- Salladasburg
(5 miles [8 km] to the east)
- Jersey Mills
(6 miles [9.7 km] to the northwest)
- Hughesville
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Hughesville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hughesville
- Hughesville is located in Lycoming County
- Population from the 2020 Census: 2,024 people
- Jump to TripAdvisor's Tourism page for Hughesville <2>
- Carsontown
(8 miles [12.9 km] to the north)
- Brookside
(8 miles [12.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Brookside. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Brookside
- Brookside is located in Lycoming County
- Google driving directions:
- From your current location to Brookside
- From Ramsey to Brookside
- Jersey Shore
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Jersey Shore have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jersey Shore
- Jersey Shore is located in Lycoming County
- Population from the 2020 Census: 4,132 people
- Jump to TripAdvisor's Tourism page for Jersey Shore <2>
- Antes Fort
(8 miles [12.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Antes Fort. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Antes Fort
- Antes Fort is located in Lycoming County
- Google driving directions:
- From your current location to Antes Fort
- From Ramsey to Antes Fort
- Montgomery
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Montgomery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montgomery
- Montgomery is located in Lycoming County
- Population from the 2020 Census: 1,502 people
- Jump to TripAdvisor's Tourism page for Montgomery <2>
- Linden
(10 miles [16.1 km] to the east)
- White Pine
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for White Pine. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for White Pine
- White Pine is located in Lycoming County
- Google driving directions:
- From your current location to White Pine
- From Ramsey to White Pine
- Picture Rocks
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Picture Rocks have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Picture Rocks
- Picture Rocks is located in Lycoming County
- Population from the 2020 Census: 643 people
- Collomsville
(13 miles [20.9 km] to the southeast)
- Centre County
- The following are listed by their distance from Ramsey, with the one closest to Ramsey listed first.
- Blanchard
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Blanchard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blanchard
- Blanchard is located in Centre County
- Livonia
(21 miles [33.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Livonia. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Livonia
- Livonia is located in Centre County
- Google driving directions:
- From your current location to Livonia
- From Ramsey to Livonia
- Monument
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Monument have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monument
- Monument is located in Centre County
- Rebersburg
(24 miles [38.6 km] to the south)
- Romola
(24 miles [38.6 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Romola. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Romola
- Romola is located in Centre County
- Google driving directions:
- From your current location to Romola
- From Ramsey to Romola
- Howard
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Howard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howard
- Howard is located in Centre County
- Population from the 2020 Census: 728 people
- Jump to TripAdvisor's Tourism page for Howard <2>
- Jacksonville
(25 miles [40.2 km] to the southwest)
- Fiedler
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Fiedler have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fiedler
- Fiedler is located in Centre County
- Madisonburg
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Madisonburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Madisonburg
- Madisonburg is located in Centre County
- Woodward
(26 miles [41.8 km] to the south)
- Aaronsburg
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Aaronsburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Aaronsburg
- Aaronsburg is located in Centre County
- Jump to TripAdvisor's Tourism page for Aaronsburg <2>
- Millheim
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Millheim have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millheim
- Millheim is located in Centre County
- Population from the 2020 Census: 876 people
- Jump to TripAdvisor's Tourism page for Millheim <2>
- Coburn
(29 miles [46.7 km] to the south)
- Clinton County
- The following are listed by their distance from Ramsey, with the one closest to Ramsey listed first.
- Avis
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Avis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Avis
- Avis is located in Clinton County
- Population from the 2020 Census: 1,476 people
- Jump to TripAdvisor's Tourism page for Avis <2>
- McElhattan
(8 miles [12.9 km] to the south)
- Youngdale
(9 miles [14.5 km] to the south)
- Swissdale
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Swissdale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Swissdale
- Swissdale is located in Clinton County
- Dunnstown
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Dunnstown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunnstown
- Dunnstown is located in Clinton County
- Rauchtown
(12 miles [19.3 km] to the southeast)
- Castanea
(12 miles [19.3 km] to the southwest)
- Farrandsville
(12 miles [19.3 km] to the southwest)
- Lock Haven
(12 miles [19.3 km] to the southwest)
- Flemington
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Flemington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flemington
- Flemington is located in Clinton County
- Population from the 2020 Census: 1,312 people
- Mill Hall
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Mill Hall have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mill Hall
- Mill Hall is located in Clinton County
- Population from the 2020 Census: 1,586 people
- Jump to TripAdvisor's Tourism page for Mill Hall <2>
- Rote
(15 miles [24.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Rote. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Rote
- Rote is located in Clinton County
- Google driving directions:
- From your current location to Rote
- From Ramsey to Rote
- Salona
(15 miles [24.1 km] to the southwest)
- Northumberland County
- The following are listed by their distance from Ramsey, with the one closest to Ramsey listed first.
- Dewart
(26 miles [41.8 km] to the southeast)
- Watsontown
(27 miles [43.5 km] to the southeast)
- McEwensville
(30 miles [48.3 km] to the southeast)
- Tioga County
- The following are listed by their distance from Ramsey, with the one closest to Ramsey listed first.
- Blackwell
(18 miles [29 km] to the north)
- Hoytville
(20 miles [32.2 km] to the north)
- Hartsfield
(21 miles [33.8 km] to the north)
- Morris
(21 miles [33.8 km] to the north)
- Pine
(22 miles [35.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Pine. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Pine
- Pine is located in Tioga County
- Google driving directions:
- From your current location to Pine
- From Ramsey to Pine
- Liberty
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liberty
- Liberty is located in Tioga County
- Population from the 2020 Census: 230 people
- Antrim
(24 miles [38.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Antrim. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Antrim
- Antrim is located in Tioga County
- Google driving directions:
- From your current location to Antrim
- From Ramsey to Antrim
- Sebring
(24 miles [38.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Sebring. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sebring
- Sebring is located in Tioga County
- Google driving directions:
- From your current location to Sebring
- From Ramsey to Sebring
- Landrus
(25 miles [40.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Landrus. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Landrus
- Landrus is located in Tioga County
- Google driving directions:
- From your current location to Landrus
- From Ramsey to Landrus
- East Point
(25 miles [40.2 km] to the northeast)
- Brownlee
(26 miles [41.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Brownlee. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Brownlee
- Brownlee is located in Tioga County
- Google driving directions:
- From your current location to Brownlee
- From Ramsey to Brownlee
- Balsam
(28 miles [45.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Balsam. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Balsam
- Balsam is located in Tioga County
- Google driving directions:
- From your current location to Balsam
- From Ramsey to Balsam
- Ogdensburg
(29 miles [46.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Ogdensburg. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ogdensburg
- Ogdensburg is located in Tioga County
- Google driving directions:
- From your current location to Ogdensburg
- From Ramsey to Ogdensburg
- Union County
- The following are listed by their distance from Ramsey, with the one closest to Ramsey listed first.
- Alvira ‑ Historic
(21 miles [33.8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Alvira. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Alvira
- Alvira is located in Union County
- Former name for Alvira:
- Wisetown
- Google driving directions:
- From your current location to Alvira
- From Ramsey to Alvira
- Allenwood
(25 miles [40.2 km] to the southeast)
- Red Bank
(26 miles [41.8 km] to the southeast)
- Hartleton
(27 miles [43.5 km] to the south)
- Laurelton
(28 miles [45.1 km] to the south)
- Glen Iron
(29 miles [46.7 km] to the south)
- Millmont
(29 miles [46.7 km] to the south)
- Mifflinburg
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Mifflinburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mifflinburg
- Mifflinburg is located in Union County
- Population from the 2020 Census: 3,445 people
- Jump to TripAdvisor's Tourism page for Mifflinburg <2>
- New Columbia
(29 miles [46.7 km] to the southeast)
- West Milton
(29 miles [46.7 km] to the southeast)
- Cherry Run
(30 miles [48.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Cherry Run. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Cherry Run
- Cherry Run is located in Union County
- Google driving directions:
- From your current location to Cherry Run
- From Ramsey to Cherry Run
For an expanded list of the communities that are closest to Ramsey, see our County-by-County Page for Ramsey.
Cemeteries Near Ramsey ...
Below are cemeteries that are in the vicinity of Ramsey.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Ramsey covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Ramsey, with the one closest to Ramsey listed first.
- Bellevue Cemetery
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for the Bellevue Cemetery
- Note: The GPS coordinates that we are using for the Bellevue Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jersey Shore Cemetery
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for the Jersey Shore Cemetery
- Note: The GPS coordinates that we are using for the Jersey Shore Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Pine Creek Cemetery
(7 miles [11.3 km] to the southeast)
- Ft. Antes Cemetery
(7 miles [11.3 km] to the southeast)
- Jump to our Gazetteer entry for the Ft. Antes Cemetery
- Note: The GPS coordinates that we are using for the Ft. Antes Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Carsontown Cemetery
(7 miles [11.3 km] to the north)
- Jump to our Gazetteer entry for the Carsontown Cemetery
- Note: The GPS coordinates that we are using for the Carsontown Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Rest Haven Memorial Park
(8 miles [12.9 km] to the south)
- Jump to our Gazetteer entry for the Rest Haven Memorial Park
- Note: The GPS coordinates that we are using for the Rest Haven Memorial Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Anthony Cemetery
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for the Anthony Cemetery
- Note: The GPS coordinates that we are using for the Anthony Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Bluestone Cemetery
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for the Bluestone Cemetery
- Note: The GPS coordinates that we are using for the Bluestone Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Dunnstown UMC Cemetery
(10 miles [16.1 km] to the southwest)
- Summit Cemetery
(10 miles [16.1 km] to the northeast)
- Limestone Cemetery
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for the Limestone Cemetery
- Note: The GPS coordinates that we are using for the Limestone Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Okome Cemetery
(11 miles [17.7 km] to the northwest)
- Jump to our Gazetteer entry for the Okome Cemetery
- Note: The GPS coordinates that we are using for the Okome Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Continue List (87 more) ...
- Persun Cemetery
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for the Persun Cemetery
- Note: The GPS coordinates that we are using for the Persun Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Dowling Hill Cemetery
(11 miles [17.7 km] to the north)
- Jump to our Gazetteer entry for the Dowling Hill Cemetery
- Note: The GPS coordinates that we are using for the Dowling Hill Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Beth Yehuda Cemetery
(12 miles [19.3 km] to the southwest)
- Jump to our Gazetteer entry for the Beth Yehuda Cemetery
- Note: The GPS coordinates that we are using for the Beth Yehuda Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>
The Rand McNally Atlas shows that in 1895, Ramsey had railroad service and no post office.
These communities are listed based on their distance from Ramsey, with the one closest to Ramsey listed first.
- Tombs Run
(2 miles [3.2 km] to the south)
- Note: The GPS coordinates that we are using for Tombs Run have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tombs Run
- Tombs Run is located in Lycoming County
- Waterville
(2 miles [3.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Waterville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waterville
- Waterville is located in Lycoming County
- Jump to TripAdvisor's Tourism page for Waterville <2>
- English Mills
(4 miles [6.4 km] to the north)
- Salladasburg
(5 miles [8 km] to the east)
- Woolrich
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Woolrich have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woolrich
- Woolrich is located in Clinton County
- Jersey Mills
(6 miles [9.7 km] to the northwest)
- Larrys Creek
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Larrys Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Larrys Creek
- Larrys Creek is located in Lycoming County
- Hughesville
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Hughesville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hughesville
- Hughesville is located in Lycoming County
- Population from the 2020 Census: 2,024 people
- Jump to TripAdvisor's Tourism page for Hughesville <2>
- Chatham Run
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Chatham Run have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chatham Run
- Chatham Run is located in Clinton County
- McElhattan
(8 miles [12.9 km] to the south)
- Antes Fort
(8 miles [12.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Antes Fort. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Antes Fort
- Antes Fort is located in Lycoming County
- Google driving directions:
- From your current location to Antes Fort
- From Ramsey to Antes Fort
- Jersey Shore
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Jersey Shore have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jersey Shore
- Jersey Shore is located in Lycoming County
- Population from the 2020 Census: 4,132 people
- Jump to TripAdvisor's Tourism page for Jersey Shore <2>
- Continue List (20 more) ...
- Brookside
(8 miles [12.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Brookside. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Brookside
- Brookside is located in Lycoming County
- Google driving directions:
- From your current location to Brookside
- From Ramsey to Brookside
- Haneyville
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Haneyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haneyville
- Haneyville is located in Clinton County
- Nippono Park ‑ Historic
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Nippono Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nippono Park
- Nippono Park is located in Lycoming County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Ramsey. See our List of 1890's Communities around Ramsey.
Newspapers Published in Ramsey ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 60 newspapers that have been published in the area around Ramsey.
Although we're unaware of any newspapers that were published in the immediate area of Ramsey, there are papers which were published within 21 miles [33.8 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Ramsey.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Ramsey:
- Websites specific to Pennsylvania
- Pages specific to Lycoming County
- Genealogy information for nearby counties
- Centre County
- Clinton County
- Northumberland County
- Tioga County
- Union County
- Cemetery Information and Directories for Pennsylvania
Off-the-Road Links ...
Unfortunately, we don't know of a website for Ramsey. If you can help, please contact us through our Feedback Page.
The official website for Lycoming County: www.lyco.org/
The official website for Commonwealth of Pennsylvania: https://www.pa.gov/
Footnotes ...
<1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Ramsey) to Point B.Our distance measurements begin at a specific point in Ramsey. The point we use is located at these GPS coordinates - Latitude: 41.2846, Longitude: -77.3246 In this case, the coordinates for Ramsey have been provided by the Geographic Names Information System (GNIS). |
<5> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<6> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Ramsey, please let us know so that we can improve our accuracy. |