Welcome to Lockport ...
Lockport is located in Clinton County<1>.
Lockport is 630 feet [192 m] above sea level.<2>.
Time Zone: Lockport lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time
Area Codes for Lockport: 570 & 272<3>
Communities Also Named Lockport ...
While we believe that this Lockport is located in Clinton County, we know of another 5 Pennsylvania communities named Lockport. Those communities are located in the following counties: Erie, Mifflin, Northampton, Westmoreland and York County.
Beyond Pennsylvania, there are 19 communities that are also named Lockport - they are located in Illinois, Indiana, Kansas (3), Kentucky, Louisiana, Manitoba, Michigan (2), New York, Ohio (2) and Tennessee.
For more information, see our Tidbits & Trivia Page for Lockport.
Websites for Lockport ...
Chamber of Commerce: www.clintoncountyinfo.com/
Although we don't have any websites that are specific to Lockport, the following might be of interest:
Communities near Lockport ...
We have created a list of 10 communities that are near Lockport.
- Hughesville
(16 miles [25.7 km] to the northeast)- Note: The GPS coordinates that we are using for Hughesville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hughesville
- Hughesville is located in Lycoming County
- Population from the 2020 Census: 2,024 people
- Jump to TripAdvisor's Tourism page for Hughesville <5>
- Mill Hall
(3 miles [4.8 km] to the southwest)- Note: The GPS coordinates that we are using for Mill Hall have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mill Hall
- Mill Hall is located in Clinton County
- Population from the 2020 Census: 1,586 people
- Jump to TripAdvisor's Tourism page for Mill Hall <5>
- Avis
(7 miles [11.3 km] to the northeast)- Note: The GPS coordinates that we are using for Avis have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Avis
- Avis is located in Clinton County
- Population from the 2020 Census: 1,476 people
- Jump to TripAdvisor's Tourism page for Avis <5>
- Millheim
(17 miles [27.4 km] to the south)- Note: The GPS coordinates that we are using for Millheim have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millheim
- Millheim is located in Centre County
- Population from the 2020 Census: 876 people
- Jump to TripAdvisor's Tourism page for Millheim <5>
- Howard
(14 miles [22.5 km] to the southwest)- Note: The GPS coordinates that we are using for Howard have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howard
- Howard is located in Centre County
- Population from the 2020 Census: 728 people
- Jump to TripAdvisor's Tourism page for Howard <5>
- Beech Creek
(6 miles [9.7 km] to the west)- Note: The GPS coordinates that we are using for Beech Creek have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beech Creek
- Beech Creek is located in Clinton County
- Population from the 2020 Census: 685 people
- Jump to TripAdvisor's Tourism page for Beech Creek <5>
- Loganton
(9 miles [14.5 km] to the southeast)- Note: The GPS coordinates that we are using for Loganton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loganton
- Loganton is located in Clinton County
- Population from the 2020 Census: 475 people
- Jump to TripAdvisor's Tourism page for Loganton <5>
- Salladasburg
(14 miles [22.5 km] to the northeast)- Jump to our Gazetteer entry for Salladasburg
- Salladasburg is located in Lycoming County
- Population from the 2020 Census: 223 people
- Cedar Springs
(4 miles [6.4 km] to the southwest)- Note: We haven't been able to verify our GPS coordinates for Cedar Springs. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Cedar Springs
- Cedar Springs is located in Clinton County
- Farrandsville
(4 miles [6.4 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Farrandsville. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Farrandsville
- Farrandsville is located in Clinton County
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Lockport. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Lockport.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Lockport. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Lockport.
We also have a detailed list of newspapers that have been published in the area around Lockport. See our Newspapers Page for Lockport.
TripAdvisor Tourism Pages for Lockport ...
Looking for more information about Lockport? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Lockport, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Lockport.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Lockport. If you can help, please contact us through our Feedback Page.
The official website for Clinton County: www.clintoncountypa.com/
The official website for Commonwealth of Pennsylvania: https://www.pa.gov/
Footnotes ...
| <1> | If you're interested in how the shape of Pennsylvania's counties, including Clinton, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <2> | The elevation is an estimate for the area around Lockport - it will be higher in some places and lower in others. |
| <3> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 570 code has been Overlayed with the 272 area code. New phone numbers in the Lockport area will be assigned with one of these codes: 570 or 272. As a result, placing a call in the Lockport area will require 10-digit dialing (where you enter both the area code and then the phone number). |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <5> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <6> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |