RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Pennsylvania >> Blair County >> Mill Run >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Pennsylvania

The Commemorative Quarter for Pennsylvania





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Mill Run (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Mill Run. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Mill Run is located in Blair County.

To see how the shape of Pennsylvania's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Blair County: Bedford, Cambria, Centre & Huntingdon.

Below are the counties that are near Mill Run. For each of these counties, we show a sample of those communities that are closest to Mill Run:

  • Blair County     (The home county of Mill Run)
    • The following are listed by their distance from Mill Run, with the one closest to Mill Run listed first.
    • Altoona
      (2 miles [3.2 km] to the east)
    • Canan
      (3 miles [4.8 km] to the south)
      • Note: The GPS coordinates that we are using for Canan have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Canan
      • Canan is located in Blair County
    • Highland Fling
      (5 miles [8 km] to the north)
      • Jump to our Gazetteer entry for Highland Fling
      • Highland Fling is located in Blair County
    • Duncansville
      (5 miles [8 km] to the south)
      • Note: The GPS coordinates that we are using for Duncansville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Duncansville
      • Duncansville is located in Blair County
      • Population from the 2020 Census: 1,148 people
      • Jump to TripAdvisor's Tourism page for Duncansville <1>
    • Hollidaysburg
      (5 miles [8 km] to the southeast)
    • Frankstown
      (6 miles [9.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Frankstown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Frankstown
      • Frankstown is located in Blair County
    • Newry
      (7 miles [11.3 km] to the south)
    • Bellwood
      (8 miles [12.9 km] to the northeast)
      • Note: The GPS coordinates that we are using for Bellwood have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bellwood
      • Bellwood is located in Blair County
      • Population from the 2020 Census: 1,751 people
      • Jump to TripAdvisor's Tourism page for Bellwood <1>
    • Puzzletown
      (9 miles [14.5 km] to the south)
      • Jump to our Gazetteer entry for Puzzletown
      • Puzzletown is located in Blair County
    • Tipton
      (11 miles [17.7 km] to the northeast)
    • Roaring Spring
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Roaring Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Roaring Spring
      • Roaring Spring is located in Blair County
      • Population from the 2020 Census: 2,399 people
      • Jump to TripAdvisor's Tourism page for Roaring Spring <1>
    • Oreminea
      (11 miles [17.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Oreminea have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oreminea
      • Oreminea is located in Blair County
  • Bedford County
    • The following are listed by their distance from Mill Run, with the one closest to Mill Run listed first.
    • Waterside
      (22 miles [35.4 km] to the south)
      • Jump to our Gazetteer entry for Waterside
      • Waterside is located in Bedford County
    • New Enterprise
      (23 miles [37 km] to the south)
      • Jump to our Gazetteer entry for New Enterprise
      • New Enterprise is located in Bedford County
    • Osterburg
      (23 miles [37 km] to the south)
    • Salemville
      (24 miles [38.6 km] to the south)
      • Jump to our Gazetteer entry for Salemville
      • Salemville is located in Bedford County
    • Woodbury
      (24 miles [38.6 km] to the south)
      • Note: The GPS coordinates that we are using for Woodbury have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodbury
      • Woodbury is located in Bedford County
      • Population from the 2020 Census: 265 people
      • Jump to TripAdvisor's Tourism page for Woodbury <1>
    • Marble City
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Marble City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Marble City
      • Marble City is located in Bedford County
    • Riddlesburg
      (25 miles [40.2 km] to the south)
      • Jump to our Gazetteer entry for Riddlesburg
      • Riddlesburg is located in Bedford County
    • Pleasantville
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Pleasantville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pleasantville
      • Pleasantville is located in Bedford County
      • Population from the 2020 Census: 205 people
    • Yellow Creek
      (26 miles [41.8 km] to the south)
      • Jump to our Gazetteer entry for Yellow Creek
      • Yellow Creek is located in Bedford County
    • Langdondale
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Langdondale have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Langdondale
      • Langdondale is located in Bedford County
    • Saint Clairsville
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Saint Clairsville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Clairsville
      • Saint Clairsville is located in Bedford County
      • Population from the 2020 Census: 75 people
    • Saxton
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Saxton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saxton
      • Saxton is located in Bedford County
      • Population from the 2020 Census: 679 people
      • Jump to TripAdvisor's Tourism page for Saxton <1>
  • Cambria County
    • The following are listed by their distance from Mill Run, with the one closest to Mill Run listed first.
    • Buckhorn
      (3 miles [4.8 km] to the northwest)
      • Jump to our Gazetteer entry for Buckhorn
      • Buckhorn is located in Cambria County
    • Gallitzin
      (5 miles [8 km] to the west)
      • Note: The GPS coordinates that we are using for Gallitzin have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gallitzin
      • Gallitzin is located in Cambria County
      • Population from the 2020 Census: 1,514 people
      • Jump to TripAdvisor's Tourism page for Gallitzin <1>
    • Amsbry
      (6 miles [9.7 km] to the west)
      • Jump to our Gazetteer entry for Amsbry
      • Amsbry is located in Cambria County
    • Tunnelhill
      (6 miles [9.7 km] to the west)
      • Note: The GPS coordinates that we are using for Tunnelhill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tunnelhill
      • Tunnelhill is located in Cambria County
      • Population from the 2020 Census: 327 people
    • Ashville
      (7 miles [11.3 km] to the northwest)
    • Dysart
      (7 miles [11.3 km] to the northwest)
      • Jump to our Gazetteer entry for Dysart
      • Dysart is located in Cambria County
    • Spindley City
      (7 miles [11.3 km] to the west)
      • Note: The GPS coordinates that we are using for Spindley City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spindley City
      • Spindley City is located in Cambria County
    • Cresson
      (8 miles [12.9 km] to the west)
    • Sankertown
      (8 miles [12.9 km] to the west)
      • Note: The GPS coordinates that we are using for Sankertown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sankertown
      • Sankertown is located in Cambria County
      • Population from the 2020 Census: 606 people
    • Chest Springs
      (10 miles [16.1 km] to the northwest)
      • Jump to our Gazetteer entry for Chest Springs
      • Chest Springs is located in Cambria County
      • Population from the 2020 Census: 138 people
    • Loretto
      (10 miles [16.1 km] to the west)
    • Munster
      (11 miles [17.7 km] to the west)
      • Jump to our Gazetteer entry for Munster
      • Munster is located in Cambria County
  • Centre County
    • The following are listed by their distance from Mill Run, with the one closest to Mill Run listed first.
    • Sandy Ridge
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Sandy Ridge have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sandy Ridge
      • Sandy Ridge is located in Centre County
    • New Town
      (25 miles [40.2 km] to the north)
      • Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Town
      • New Town is located in Centre County
    • Marengo
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Marengo have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Marengo
      • Marengo is located in Centre County
    • Glass City
      (27 miles [43.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Glass City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Glass City
      • Glass City is located in Centre County
    • South Philipsburg
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for South Philipsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for South Philipsburg
      • South Philipsburg is located in Centre County
    • Musser
      (28 miles [45.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Musser have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Musser
      • Musser is located in Centre County
    • Port Matilda
      (28 miles [45.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Port Matilda have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Port Matilda
      • Port Matilda is located in Centre County
      • Population from the 2020 Census: 582 people
      • Jump to TripAdvisor's Tourism page for Port Matilda <1>
    • Philipsburg
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Philipsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Philipsburg
      • Philipsburg is located in Centre County
      • Population from the 2020 Census: 2,678 people
      • Jump to TripAdvisor's Tourism page for Philipsburg <1>
    • Ramblewood
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Ramblewood have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ramblewood
      • Ramblewood is located in Centre County
    • Stormstown
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Stormstown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stormstown
      • Stormstown is located in Centre County
    • North Philipsburg
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for North Philipsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for North Philipsburg
      • North Philipsburg is located in Centre County
  • Clearfield County
    • The following are listed by their distance from Mill Run, with the one closest to Mill Run listed first.
    • Lyleville
      (16 miles [25.7 km] to the north)
      • Jump to our Gazetteer entry for Lyleville
      • Lyleville is located in Clearfield County
    • Utahville
      (16 miles [25.7 km] to the north)
      • Jump to our Gazetteer entry for Utahville
      • Utahville is located in Clearfield County
    • Blain City
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Blain City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blain City
      • Blain City is located in Clearfield County
    • Coalport
      (17 miles [27.4 km] to the north)
    • Rosebud
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Rosebud have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rosebud
      • Rosebud is located in Clearfield County
    • Ginter
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for Ginter have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ginter
      • Ginter is located in Clearfield County
    • Hegarty Crossroads
      (19 miles [30.6 km] to the north)
      • Note: The GPS coordinates that we are using for Hegarty Crossroads have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hegarty Crossroads
      • Hegarty Crossroads is located in Clearfield County
    • Irvona
      (19 miles [30.6 km] to the north)
    • Glen Hope
      (20 miles [32.2 km] to the north)
      • Jump to our Gazetteer entry for Glen Hope
      • Glen Hope is located in Clearfield County
      • Population from the 2020 Census: 135 people
    • Houtzdale
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Houtzdale have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Houtzdale
      • Houtzdale is located in Clearfield County
      • Population from the 2020 Census: 739 people
      • Jump to TripAdvisor's Tourism page for Houtzdale <1>
    • Ramey
      (20 miles [32.2 km] to the north)
      • Jump to our Gazetteer entry for Ramey
      • Ramey is located in Clearfield County
      • Population from the 2020 Census: 425 people
    • McPherron
      (20 miles [32.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for McPherron have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McPherron
      • McPherron is located in Clearfield County
  • Huntingdon County
    • The following are listed by their distance from Mill Run, with the one closest to Mill Run listed first.
    • Water Street
      (15 miles [24.1 km] to the east)
      • Jump to our Gazetteer entry for Water Street
      • Water Street is located in Huntingdon County
    • Birmingham
      (15 miles [24.1 km] to the northeast)
      • Jump to our Gazetteer entry for Birmingham
      • Birmingham is located in Huntingdon County
      • Population from the 2020 Census: 87 people
    • Marklesburg
      (16 miles [25.7 km] to the southeast)
      • Jump to our Gazetteer entry for Marklesburg
      • Marklesburg is located in Huntingdon County
      • Population from the 2020 Census: 194 people
    • Alexandria
      (18 miles [29 km] to the east)
    • Hesston
      (18 miles [29 km] to the east)
    • McConnellstown
      (18 miles [29 km] to the east)
      • Jump to our Gazetteer entry for McConnellstown
      • McConnellstown is located in Huntingdon County
    • Petersburg
      (20 miles [32.2 km] to the east)
      • Note: The GPS coordinates that we are using for Petersburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Petersburg
      • Petersburg is located in Huntingdon County
      • Population from the 2020 Census: 460 people
      • Jump to TripAdvisor's Tourism page for Petersburg <1>
    • Seven Stars
      (21 miles [33.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Seven Stars have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Seven Stars
      • Seven Stars is located in Huntingdon County
    • Huntingdon
      (22 miles [35.4 km] to the east)
    • Middletown
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Middletown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Middletown
      • Middletown is located in Huntingdon County
    • Dungarvin
      (23 miles [37 km] to the northeast)
      • Jump to our Gazetteer entry for Dungarvin
      • Dungarvin is located in Huntingdon County
    • Coalmont
      (23 miles [37 km] to the southeast)
      • Jump to our Gazetteer entry for Coalmont
      • Coalmont is located in Huntingdon County
      • Population from the 2020 Census: 98 people
  • Indiana County
    • The following are listed by their distance from Mill Run, with the one closest to Mill Run listed first.
    • Alverda
      (23 miles [37 km] to the west)
      • Jump to our Gazetteer entry for Alverda
      • Alverda is located in Indiana County
    • Uniontown
      (24 miles [38.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Uniontown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Uniontown
      • Uniontown is located in Indiana County
    • Rexis
      (25 miles [40.2 km] to the west)
      • Jump to our Gazetteer entry for Rexis
      • Rexis is located in Indiana County
    • Cherry Tree
      (26 miles [41.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Cherry Tree have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cherry Tree
      • Cherry Tree is located in Indiana County
      • Population from the 2020 Census: 334 people
    • Heilwood
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Heilwood have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Heilwood
      • Heilwood is located in Indiana County
    • Nolo
      (27 miles [43.5 km] to the west)
      • Jump to our Gazetteer entry for Nolo
      • Nolo is located in Indiana County
    • Pine Flats
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Pine Flats have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pine Flats
      • Pine Flats is located in Indiana County
    • Wehrum
      (27 miles [43.5 km] to the west)
      • Jump to our Gazetteer entry for Wehrum
      • Wehrum is located in Indiana County
    • Cookport
      (28 miles [45.1 km] to the northwest)
      • Jump to our Gazetteer entry for Cookport
      • Cookport is located in Indiana County
    • Hillsdale
      (28 miles [45.1 km] to the northwest)
      • Jump to our Gazetteer entry for Hillsdale
      • Hillsdale is located in Indiana County
    • Kenwood
      (28 miles [45.1 km] to the west)
      • Jump to our Gazetteer entry for Kenwood
      • Kenwood is located in Indiana County
    • Dilltown
      (29 miles [46.7 km] to the west)
  • Somerset County
    • The following are listed by their distance from Mill Run, with the one closest to Mill Run listed first.
    • Ogletown
      (25 miles [40.2 km] to the southwest)
      • Jump to our Gazetteer entry for Ogletown
      • Ogletown is located in Somerset County
    • Windber
      (27 miles [43.5 km] to the southwest)
    • Paint
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Paint have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Paint
      • Paint is located in Somerset County
      • Population from the 2020 Census: 930 people
    • Tire Hill
      (30 miles [48.3 km] to the southwest)
      • Jump to our Gazetteer entry for Tire Hill
      • Tire Hill is located in Somerset County

For an expanded list of the communities that are closest to Mill Run, see our County-by-County Page for Mill Run.

Newspapers Published in Mill Run ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 76 newspapers that have been published in the area around Mill Run.

Although we're unaware of any newspapers that were published in the immediate area of Mill Run, there are papers which were published within 14 miles [22.5 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Mill Run.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Mill Run:

Cemeteries Near Mill Run ...

Below are cemeteries that are in the vicinity of Mill Run.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Mill Run covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Mill Run, with the one closest to Mill Run listed first.

  • St.s Peter & Paul RC Cemetery
    (Less than 2 miles to the northeast)
  • St. Mary Ukrainian Catholic Cemetery
    (Less than 2 miles to the northeast)
  • St.s Peter & Paul Russian Orthodox Cemetery
    (Less than 2 miles to the northeast)
  • St.s Peter & Paul Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the St.s Peter & Paul Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St.s Peter & Paul Cemetery
  • Hutchinson Cemetery
    (Less than 2 miles to the south)
    • Note: We haven't been able to verify our GPS coordinates for the Hutchinson Cemetery. Although the coordinates have been estimated, they should be in the vicinity.<5>
    • The Hutchinson Cemetery has also been known as:
    • Guildford Cemetery
    • McGarvey Cemetery
    • Jump to our Gazetteer entry for the Hutchinson Cemetery
    • Jump to Find-A-Grave: FG ID #45167 <4>
  • Agudath Achim Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Agudath Achim Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Agudath Achim Cemetery
  • Blacks Cemetery
    (2 miles [3.2 km] to the south)
    • Note: The GPS coordinates that we are using for the Blacks Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Blacks Cemetery
  • Calvary Cemetery
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for the Calvary Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Calvary Cemetery
  • Oak Ridge Cemetery
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for the Oak Ridge Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Oak Ridge Cemetery
  • St. Johns Cemetery
    (2 miles [3.2 km] to the east)
  • St. Marys Cemetery
    (2 miles [3.2 km] to the east)
  • Fairview Cemetery
    (2 miles [3.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Fairview Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Fairview Cemetery
  • Continue List   (315 more) ...
    • Rose Hill Cemetery
      (3 miles [4.8 km] to the east)
    • Grandview Cemetery
      (3 miles [4.8 km] to the northeast)
    • Bennington Cemetery
      (4 miles [6.4 km] to the west)
      • Note: The GPS coordinates that we are using for the Bennington Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Bennington Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

While we didn't find Mill Run in the Atlas, the following 1895 communities would have been found near the current location of Mill Run.

These communities are listed based on their distance from Mill Run, with the one closest to Mill Run listed first.

  • Allegheny Furnace
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for Allegheny Furnace have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Allegheny Furnace
    • Allegheny Furnace is located in Blair County
  • Eldorado
    (2 miles [3.2 km] to the south)
    • Note: The GPS coordinates that we are using for Eldorado have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eldorado
    • Eldorado is located in Blair County
  • Altoona
    (2 miles [3.2 km] to the east)
  • Canan
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for Canan have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Canan
    • Canan is located in Blair County
  • Juniata
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Juniata have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Juniata
    • Juniata is located in Blair County
  • Wopsononock
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Wopsononock have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wopsononock
    • Wopsononock is located in Blair County
  • Duncansville
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Duncansville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Duncansville
    • Duncansville is located in Blair County
    • Population from the 2020 Census: 1,148 people
    • Jump to TripAdvisor's Tourism page for Duncansville <1>
  • Stiffler
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Stiffler have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stiffler
    • Stiffler is located in Blair County
  • Hollidaysburg
    (5 miles [8 km] to the southeast)
  • Elstie
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Elstie have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elstie
    • Elstie is located in Cambria County
  • Gallitzin
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Gallitzin have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gallitzin
    • Gallitzin is located in Cambria County
    • Population from the 2020 Census: 1,514 people
    • Jump to TripAdvisor's Tourism page for Gallitzin <1>
  • Frankstown
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Frankstown have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Frankstown
    • Frankstown is located in Blair County
  • Continue List   (14 more) ...
    • Amsbry
      (6 miles [9.7 km] to the west)
      • Jump to our Gazetteer entry for Amsbry
      • Amsbry is located in Cambria County
    • Summit
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Summit have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Summit
      • Summit is located in Cambria County
    • Newry
      (7 miles [11.3 km] to the south)

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Mill Run. See our List of 1890's Communities around Mill Run.

Unfortunately, we don't know of a website for Mill Run. If you can help, please contact us through our Feedback Page.

The official website for State of Pennsylvania: https://www.pa.gov/

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Mill Run) to Point B.Our distance measurements begin at a specific point in Mill Run. The point we use is located at these GPS coordinates - Latitude: 40.5081, Longitude: -78.4356       In this case, the coordinates for Mill Run have been provided by the Geographic Names Information System (GNIS).
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Mill Run, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024