RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> Commonwealth of Pennsylvania >> Clinton County >> Mill Hall >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Pennsylvania

The Commemorative Quarter for Pennsylvania





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Mill Hall (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Mill Hall. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Mill Hall is located in Clinton County.

To see how the shape of Pennsylvania's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Clinton County: Cameron, Centre, Clearfield, Lycoming, Potter & Union.

Below are the counties that are near Mill Hall. For each of these counties, we show a sample of those communities that are closest to Mill Hall:

  • Clinton County     (The home county of Mill Hall)
    • The following are listed by their distance from Mill Hall, with the one closest to Mill Hall listed first.
    • Flemington
      (Less than 2 miles to the northeast)
      • Note: The GPS coordinates that we are using for Flemington have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Flemington
      • Flemington is located in Clinton County
      • Population from the 2020 Census: 1,312 people
    • Cedar Springs
      (Less than 2 miles to the south)
      • Note: We haven't been able to verify our GPS coordinates for Cedar Springs. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Cedar Springs
      • Cedar Springs is located in Clinton County
    • Lock Haven
      (2 miles [3.2 km] to the northeast)
    • Salona
      (2 miles [3.2 km] to the southeast)
      • Jump to our Gazetteer entry for Salona
      • Salona is located in Clinton County
    • Castanea
      (3 miles [4.8 km] to the northeast)
    • Rote
      (3 miles [4.8 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Rote. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Rote
      • Rote is located in Clinton County
    • Farrandsville
      (4 miles [6.4 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Farrandsville. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Farrandsville
      • Farrandsville is located in Clinton County
    • Dunnstown
      (4 miles [6.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Dunnstown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dunnstown
      • Dunnstown is located in Clinton County
    • Beech Creek
      (4 miles [6.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Beech Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beech Creek
      • Beech Creek is located in Clinton County
      • Population from the 2020 Census: 685 people
      • Jump to TripAdvisor's Tourism page for Beech Creek <3>
    • Swissdale
      (5 miles [8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Swissdale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Swissdale
      • Swissdale is located in Clinton County
    • Lamar
      (6 miles [9.7 km] to the south)
    • Abdera
      (6 miles [9.7 km] to the southwest)
      • Jump to our Gazetteer entry for Abdera
      • Abdera is located in Clinton County
    • McElhattan
      (7 miles [11.3 km] to the northeast)
  • Centre County
    • The following are listed by their distance from Mill Hall, with the one closest to Mill Hall listed first.
    • Blanchard
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Blanchard have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blanchard
      • Blanchard is located in Centre County
    • Howard
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Howard have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Howard
      • Howard is located in Centre County
      • Population from the 2020 Census: 728 people
      • Jump to TripAdvisor's Tourism page for Howard <3>
    • Jacksonville
      (10 miles [16.1 km] to the southwest)
      • Jump to our Gazetteer entry for Jacksonville
      • Jacksonville is located in Centre County
    • Rebersburg
      (11 miles [17.7 km] to the south)
    • Monument
      (11 miles [17.7 km] to the west)
      • Note: The GPS coordinates that we are using for Monument have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Monument
      • Monument is located in Centre County
    • Romola
      (11 miles [17.7 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Romola. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Romola
      • Romola is located in Centre County
    • Madisonburg
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Madisonburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Madisonburg
      • Madisonburg is located in Centre County
    • Livonia
      (13 miles [20.9 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Livonia. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Livonia
      • Livonia is located in Centre County
    • Aaronsburg
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Aaronsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Aaronsburg
      • Aaronsburg is located in Centre County
      • Jump to TripAdvisor's Tourism page for Aaronsburg <3>
    • Fiedler
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Fiedler have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fiedler
      • Fiedler is located in Centre County
    • Millheim
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Millheim have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Millheim
      • Millheim is located in Centre County
      • Population from the 2020 Census: 876 people
      • Jump to TripAdvisor's Tourism page for Millheim <3>
    • Woodward
      (15 miles [24.1 km] to the southeast)
    • Coburn
      (16 miles [25.7 km] to the south)
  • Clearfield County
    • Pottersdale
      (30 miles [48.3 km] to the west)
      • Jump to our Gazetteer entry for Pottersdale
      • Pottersdale is located in Clearfield County
  • Lycoming County
    • The following are listed by their distance from Mill Hall, with the one closest to Mill Hall listed first.
    • Antes Fort
      (14 miles [22.5 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Antes Fort. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Antes Fort
      • Antes Fort is located in Lycoming County
    • Ramsey
      (14 miles [22.5 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Ramsey. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Ramsey
      • Ramsey is located in Lycoming County
    • English Mills
      (17 miles [27.4 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for English Mills. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for English Mills
      • English Mills is located in Lycoming County
    • Jersey Mills
      (17 miles [27.4 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Jersey Mills. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Jersey Mills
      • Jersey Mills is located in Lycoming County
      • Jump to TripAdvisor's Tourism page for Jersey Mills <3>
    • Collomsville
      (18 miles [29 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Collomsville. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Collomsville
      • Collomsville is located in Lycoming County
    • Salladasburg
      (18 miles [29 km] to the northeast)
      • Jump to our Gazetteer entry for Salladasburg
      • Salladasburg is located in Lycoming County
      • Population from the 2020 Census: 223 people
    • Hughesville
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Hughesville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hughesville
      • Hughesville is located in Lycoming County
      • Population from the 2020 Census: 2,024 people
      • Jump to TripAdvisor's Tourism page for Hughesville <3>
    • Linden
      (20 miles [32.2 km] to the northeast)
    • Carsontown
      (22 miles [35.4 km] to the north)
      • Jump to our Gazetteer entry for Carsontown
      • Carsontown is located in Lycoming County
    • Brookside
      (23 miles [37 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Brookside. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Brookside
      • Brookside is located in Lycoming County
    • Grimesville
      (23 miles [37 km] to the northeast)
      • Jump to our Gazetteer entry for Grimesville
      • Grimesville is located in Lycoming County
    • Jersey Shore
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Jersey Shore have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jersey Shore
      • Jersey Shore is located in Lycoming County
      • Population from the 2020 Census: 4,132 people
      • Jump to TripAdvisor's Tourism page for Jersey Shore <3>
    • Montgomery
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Montgomery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Montgomery
      • Montgomery is located in Lycoming County
      • Population from the 2020 Census: 1,502 people
      • Jump to TripAdvisor's Tourism page for Montgomery <3>
  • Mifflin County
    • The following are listed by their distance from Mill Hall, with the one closest to Mill Hall listed first.
    • Milroy
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Milroy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Milroy
      • Milroy is located in Mifflin County
      • Jump to TripAdvisor's Tourism page for Milroy <3>
    • Honey Creek
      (29 miles [46.7 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Honey Creek. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Honey Creek
      • Honey Creek is located in Mifflin County
    • Alfarata
      (30 miles [48.3 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Alfarata. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Alfarata
      • Alfarata is located in Mifflin County
  • Snyder County
    • The following are listed by their distance from Mill Hall, with the one closest to Mill Hall listed first.
    • Troxelville
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Troxelville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Troxelville
      • Troxelville is located in Snyder County
    • Bannerville
      (26 miles [41.8 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Bannerville. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Bannerville
      • Bannerville is located in Snyder County
    • Middle Creek
      (26 miles [41.8 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Middle Creek. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Middle Creek
      • Middle Creek is located in Snyder County
    • Benfer
      (27 miles [43.5 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Benfer. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Benfer
      • Benfer is located in Snyder County
    • Beaver Springs
      (28 miles [45.1 km] to the southeast)
      • Jump to our Gazetteer entry for Beaver Springs
      • Beaver Springs is located in Snyder County
    • Penns Creek
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Penns Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Penns Creek
      • Penns Creek is located in Snyder County
      • Jump to TripAdvisor's Tourism page for Penns Creek <3>
    • McClure
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for McClure have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McClure
      • McClure is located in Snyder County
      • Population from the 2020 Census: 919 people
      • Jump to TripAdvisor's Tourism page for McClure <3>
    • Beavertown
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Beavertown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beavertown
      • Beavertown is located in Snyder County
      • Population from the 2020 Census: 958 people
      • Jump to TripAdvisor's Tourism page for Beavertown <3>
  • Union County
    • The following are listed by their distance from Mill Hall, with the one closest to Mill Hall listed first.
    • Cherry Run
      (19 miles [30.6 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Cherry Run. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Cherry Run
      • Cherry Run is located in Union County
    • Laurelton
      (21 miles [33.8 km] to the southeast)
      • Jump to our Gazetteer entry for Laurelton
      • Laurelton is located in Union County
    • Glen Iron
      (22 miles [35.4 km] to the southeast)
      • Jump to our Gazetteer entry for Glen Iron
      • Glen Iron is located in Union County
    • Hartleton
      (22 miles [35.4 km] to the southeast)
      • Jump to our Gazetteer entry for Hartleton
      • Hartleton is located in Union County
      • Population from the 2020 Census: 275 people
    • Millmont
      (23 miles [37 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Millmont. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Millmont
      • Millmont is located in Union County
      • Jump to TripAdvisor's Tourism page for Millmont <3>
    • Red Bank
      (24 miles [38.6 km] to the southeast)
      • Jump to our Gazetteer entry for Red Bank
      • Red Bank is located in Union County
    • Mifflinburg
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Mifflinburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mifflinburg
      • Mifflinburg is located in Union County
      • Population from the 2020 Census: 3,445 people
      • Jump to TripAdvisor's Tourism page for Mifflinburg <3>
    • Alvira ‑ Historic
      (27 miles [43.5 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Alvira. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Alvira
      • Alvira is located in Union County
      • Former name for Alvira:
      • Wisetown
    • New Berlin
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for New Berlin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Berlin
      • New Berlin is located in Union County
      • Estimated population in 2015: 867 people
      • Jump to TripAdvisor's Tourism page for New Berlin <3>
    • Allenwood
      (30 miles [48.3 km] to the east)

For an expanded list of the communities that are closest to Mill Hall, see our County-by-County Page for Mill Hall.

Cemeteries Near Mill Hall ...

Below are cemeteries that are in the vicinity of Mill Hall.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Mill Hall covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Mill Hall, with the one closest to Mill Hall listed first.

  • Sunnyside Cemetery
    (Less than 2 miles to the northwest)
    • Jump to our Gazetteer entry for the Sunnyside Cemetery
    • Note: The GPS coordinates that we are using for the Sunnyside Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Brown Cemetery
    (Less than 2 miles to the west)
    • Jump to our Gazetteer entry for the Brown Cemetery
    • Note: The GPS coordinates that we are using for the Brown Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Cedar Hill Cemetery
    (2 miles [3.2 km] to the south)
    • Jump to our Gazetteer entry for the Cedar Hill Cemetery
    • Note: The GPS coordinates that we are using for the Cedar Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Disciples Cemetery
    (2 miles [3.2 km] to the southeast)
  • Fairview Cemetery
    (2 miles [3.2 km] to the northeast)
    • Jump to our Gazetteer entry for the Fairview Cemetery
    • Note: The GPS coordinates that we are using for the Fairview Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Highland Cemetery
    (2 miles [3.2 km] to the northeast)
    • Jump to our Gazetteer entry for the Highland Cemetery
    • Note: The GPS coordinates that we are using for the Highland Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • St. Marys Cemetery
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for the St. Marys Cemetery
    • Note: The GPS coordinates that we are using for the St. Marys Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Beth Yehuda Cemetery
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for the Beth Yehuda Cemetery
    • Note: The GPS coordinates that we are using for the Beth Yehuda Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • St. Agnes Cemetery
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for the St. Agnes Cemetery
    • Note: The GPS coordinates that we are using for the St. Agnes Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Hays - Fearon Cemetery
    (4 miles [6.4 km] to the southwest)
  • Dunnstown UMC Cemetery
    (4 miles [6.4 km] to the northeast)
  • Clark Cemetery
    (5 miles [8 km] to the west)
    • Jump to our Gazetteer entry for the Clark Cemetery
    • Note: The GPS coordinates that we are using for the Clark Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (94 more) ...
    • Rest Haven Memorial Park
      (7 miles [11.3 km] to the northeast)
      • Jump to our Gazetteer entry for the Rest Haven Memorial Park
      • Note: The GPS coordinates that we are using for the Rest Haven Memorial Park have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Union Cemetery
      (8 miles [12.9 km] to the south)
      • Jump to our Gazetteer entry for the Union Cemetery
      • Note: The GPS coordinates that we are using for the Union Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Old Schracktown Cemetery
      (9 miles [14.5 km] to the southeast)
      • Jump to our Gazetteer entry for the Old Schracktown Cemetery
      • Note: The GPS coordinates that we are using for the Old Schracktown Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that Mill Hall had a population of 505 people in 1895 with a post office and railroad service. In 2020, Mill Hall had a population of 1,586 people.

These communities are listed based on their distance from Mill Hall, with the one closest to Mill Hall listed first.

  • Cedar Springs
    (Less than 2 miles to the south)
    • Note: We haven't been able to verify our GPS coordinates for Cedar Springs. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Cedar Springs
    • Cedar Springs is located in Clinton County
  • Flemington
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for Flemington have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Flemington
    • Flemington is located in Clinton County
    • Population from the 2020 Census: 1,312 people
  • Salona
    (2 miles [3.2 km] to the southeast)
    • Jump to our Gazetteer entry for Salona
    • Salona is located in Clinton County
  • Lock Haven
    (2 miles [3.2 km] to the northeast)
  • Parvin
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Parvin have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Parvin
    • Parvin is located in Clinton County
  • Mackeyville
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for Mackeyville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mackeyville
    • Mackeyville is located in Clinton County
  • Rote
    (3 miles [4.8 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Rote. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Rote
    • Rote is located in Clinton County
  • Castanea
    (3 miles [4.8 km] to the northeast)
  • Farrandsville
    (4 miles [6.4 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Farrandsville. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Farrandsville
    • Farrandsville is located in Clinton County
  • Beech Creek
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Beech Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Beech Creek
    • Beech Creek is located in Clinton County
    • Population from the 2020 Census: 685 people
    • Jump to TripAdvisor's Tourism page for Beech Creek <3>
  • Queens Run
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Queens Run have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Queens Run
    • Queens Run is located in Clinton County
  • Blanchard
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Blanchard have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Blanchard
    • Blanchard is located in Centre County
  • Continue List   (14 more) ...
    • Eagleville
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Eagleville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Eagleville
      • Eagleville is located in Centre County
    • Abdera
      (6 miles [9.7 km] to the southwest)
      • Jump to our Gazetteer entry for Abdera
      • Abdera is located in Clinton County
    • Lamar
      (6 miles [9.7 km] to the south)

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Mill Hall. See our List of 1890's Communities around Mill Hall.

Newspapers Published in the Vicinity of Mill Hall ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 56 newspapers that have been published in the area around Mill Hall.

We have organized these newspapers into two lists:

  • A Local Newspaper List - focusing on the papers published in the immediate area of Mill Hall. There are actually two parts to this list - papers printed in the immediate area of Mill Hall and those printed in the larger area surrounding Mill Hall.
  • An Extended Newspaper List - a longer list, sorted by paper name and containing those papers published within 20 miles [32.2 km]<6> of Mill Hall.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Mill Hall:

Unfortunately, we don't know of a website for Mill Hall. If you can help, please contact us through our Feedback Page.

The official website for Clinton County: www.clintoncountypa.com/

The official website for Commonwealth of Pennsylvania: https://www.pa.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Mill Hall, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Mill Hall) to Point B.Our distance measurements begin at a specific point in Mill Hall. The point we use is located at these GPS coordinates - Latitude: 41.1065, Longitude: -77.4878       In this case, the coordinates for Mill Hall have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025