Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Mill Hall had a population of 505 people in 1895 with a post office and railroad service. In 2020, Mill Hall had a population of 1,586 people.
The following communities are listed based on their distance from Mill Hall, with the one closest to Mill Hall listed first.
- Cedar Springs
(Less than 2 miles to the south)- Note: The GPS coordinates that we are using for Cedar Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Springs
- Cedar Springs is located in Clinton County
- Flemington
(Less than 2 miles to the northeast)- Note: The GPS coordinates that we are using for Flemington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flemington
- Flemington is located in Clinton County
- Population from the 2020 Census: 1,312 people
- Salona
(2 miles [3.2 km] to the southeast)- Jump to our Gazetteer entry for Salona
- Salona is located in Clinton County
- Lock Haven
(2 miles [3.2 km] to the northeast)- Jump to our Gazetteer entry for Lock Haven
- Lock Haven is located in Clinton County
- Population from the 2020 Census: 8,694 people
- Jump to TripAdvisor's Tourism page for Lock Haven <3>
- Parvin
(3 miles [4.8 km] to the southwest) - Mackeyville
(3 miles [4.8 km] to the south)- Note: The GPS coordinates that we are using for Mackeyville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mackeyville
- Mackeyville is located in Clinton County
- Rote
(3 miles [4.8 km] to the southeast) - Castanea
(3 miles [4.8 km] to the northeast)- Jump to our Gazetteer entry for Castanea
- Castanea is located in Clinton County
- Jump to TripAdvisor's Tourism page for Castanea <3>
- Farrandsville
(4 miles [6.4 km] to the north)- Note: The GPS coordinates that we are using for Farrandsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Farrandsville
- Farrandsville is located in Clinton County
- Beech Creek
(4 miles [6.4 km] to the northwest)- Note: The GPS coordinates that we are using for Beech Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beech Creek
- Beech Creek is located in Clinton County
- Population from the 2020 Census: 685 people
- Jump to TripAdvisor's Tourism page for Beech Creek <3>
- Queens Run
(5 miles [8 km] to the north)- Note: The GPS coordinates that we are using for Queens Run have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Queens Run
- Queens Run is located in Clinton County
- Blanchard
(6 miles [9.7 km] to the southwest) - Eagleville
(6 miles [9.7 km] to the southwest)- Note: The GPS coordinates that we are using for Eagleville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eagleville
- Eagleville is located in Centre County
- Abdera
(6 miles [9.7 km] to the southwest)- Jump to our Gazetteer entry for Abdera
- Abdera is located in Clinton County
- Lamar
(6 miles [9.7 km] to the south)- Jump to our Gazetteer entry for Lamar
- Lamar is located in Clinton County
- Jump to TripAdvisor's Tourism page for Lamar <3>
- Clintondale
(6 miles [9.7 km] to the south)- Note: The GPS coordinates that we are using for Clintondale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clintondale
- Clintondale is located in Clinton County
- McElhattan
(7 miles [11.3 km] to the northeast)- Jump to our Gazetteer entry for McElhattan
- McElhattan is located in Clinton County
- Jump to TripAdvisor's Tourism page for McElhattan <3>
- Chatham Run
(7 miles [11.3 km] to the northeast)- Note: The GPS coordinates that we are using for Chatham Run have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chatham Run
- Chatham Run is located in Clinton County
- Nittany
(8 miles [12.9 km] to the southwest) - Tylersville
(8 miles [12.9 km] to the southeast)- Jump to our Gazetteer entry for Tylersville
- Tylersville is located in Clinton County
- Logan Mills
(8 miles [12.9 km] to the southeast)- Note: The GPS coordinates that we are using for Logan Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Logan Mills
- Logan Mills is located in Clinton County
- Woolrich
(8 miles [12.9 km] to the northeast) - Greenburr
(9 miles [14.5 km] to the southeast)- Jump to our Gazetteer entry for Greenburr
- Greenburr is located in Clinton County
- Booneville
(9 miles [14.5 km] to the southeast)- Note: The GPS coordinates that we are using for Booneville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Booneville
- Booneville is located in Clinton County
- Ferney
(9 miles [14.5 km] to the northwest)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Mill Hall. If you can help, please contact us through our Feedback Page.
The official website for Clinton County: www.clintoncountypa.com/
The official website for State of Pennsylvania: https://www.pa.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Mill Hall, please let us know so that we can improve our accuracy. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |