RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> Commonwealth of Pennsylvania >> Armstrong County >> Furnace Run >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Pennsylvania

The Commemorative Quarter for Pennsylvania





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Furnace Run (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Furnace Run. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Furnace Run is located in Armstrong County.

To see how the shape of Pennsylvania's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Armstrong County: Allegheny, Butler, Clarion, Indiana, Jefferson & Westmoreland.

Below are the counties that are near Furnace Run. For each of these counties, we show a sample of those communities that are closest to Furnace Run:

  • Armstrong County     (The home county of Furnace Run)
    • The following are listed by their distance from Furnace Run, with the one closest to Furnace Run listed first.
    • Walkchalk
      (Less than 2 miles to the southwest)
      • Jump to our Gazetteer entry for Walkchalk
      • Walkchalk is located in Armstrong County
    • Gosford
      (2 miles [3.2 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Gosford. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Gosford
      • Gosford is located in Armstrong County
    • West Hills
      (2 miles [3.2 km] to the south)
      • Note: The GPS coordinates that we are using for West Hills have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Hills
      • West Hills is located in Armstrong County
    • West Kittanning
      (2 miles [3.2 km] to the south)
      • Note: The GPS coordinates that we are using for West Kittanning have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Kittanning
      • West Kittanning is located in Armstrong County
      • Population from the 2020 Census: 1,078 people
    • Kittanning
      (2 miles [3.2 km] to the southeast)
    • Wick City
      (2 miles [3.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Wick City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wick City
      • Wick City is located in Armstrong County
    • Cowansville
      (3 miles [4.8 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Cowansville. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Cowansville
      • Cowansville is located in Armstrong County
      • Jump to TripAdvisor's Tourism page for Cowansville <3>
    • Applewold
      (3 miles [4.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Applewold have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Applewold
      • Applewold is located in Armstrong County
      • Population from the 2020 Census: 284 people
    • Manorville
      (4 miles [6.4 km] to the south)
      • Jump to our Gazetteer entry for Manorville
      • Manorville is located in Armstrong County
      • Population from the 2020 Census: 383 people
    • Laird Crossing
      (4 miles [6.4 km] to the west)
      • Jump to our Gazetteer entry for Laird Crossing
      • Laird Crossing is located in Armstrong County
    • Worthington
      (4 miles [6.4 km] to the west)
    • Dog Town
      (5 miles [8 km] to the south)
      • Note: The GPS coordinates that we are using for Dog Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dog Town
      • Dog Town is located in Armstrong County
    • Ford City
      (5 miles [8 km] to the south)
      • Note: The GPS coordinates that we are using for Ford City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ford City
      • Ford City is located in Armstrong County
      • Population from the 2020 Census: 2,735 people
      • Jump to TripAdvisor's Tourism page for Ford City <3>
  • Allegheny County
    • The following are listed by their distance from Furnace Run, with the one closest to Furnace Run listed first.
    • Sligo
      (16 miles [25.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Sligo have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sligo
      • Sligo is located in Allegheny County
    • Karns
      (17 miles [27.4 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Karns. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Karns
      • Karns is located in Allegheny County
    • Natrona
      (18 miles [29 km] to the southwest)
      • Jump to our Gazetteer entry for Natrona
      • Natrona is located in Allegheny County
    • Brackenridge
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Brackenridge have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Brackenridge
      • Brackenridge is located in Allegheny County
      • Population from the 2020 Census: 3,113 people
      • Jump to TripAdvisor's Tourism page for Brackenridge <3>
    • Culmerville
      (20 miles [32.2 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Culmerville. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Culmerville
      • Culmerville is located in Allegheny County
    • Tarentum
      (20 miles [32.2 km] to the southwest)
    • Curtisville
      (21 miles [33.8 km] to the southwest)
      • Jump to our Gazetteer entry for Curtisville
      • Curtisville is located in Allegheny County
    • Russellton
      (22 miles [35.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Russellton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Russellton
      • Russellton is located in Allegheny County
      • Jump to TripAdvisor's Tourism page for Russellton <3>
    • Rural Ridge
      (23 miles [37 km] to the southwest)
    • Harwick
      (24 miles [38.6 km] to the southwest)
      • Jump to our Gazetteer entry for Harwick
      • Harwick is located in Allegheny County
    • Springdale
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Springdale have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Springdale
      • Springdale is located in Allegheny County
      • Population from the 2020 Census: 3,265 people
      • Jump to TripAdvisor's Tourism page for Springdale <3>
    • Cheswick
      (25 miles [40.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Cheswick have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cheswick
      • Cheswick is located in Allegheny County
      • Population from the 2020 Census: 1,662 people
      • Jump to TripAdvisor's Tourism page for Cheswick <3>
    • Indianola
      (25 miles [40.2 km] to the southwest)
  • Butler County
    • The following are listed by their distance from Furnace Run, with the one closest to Furnace Run listed first.
    • Fenelton
      (9 miles [14.5 km] to the west)
    • Dennys Mills
      (10 miles [16.1 km] to the southwest)
      • Jump to our Gazetteer entry for Dennys Mills
      • Dennys Mills is located in Butler County
    • Leasureville
      (10 miles [16.1 km] to the southwest)
      • Jump to our Gazetteer entry for Leasureville
      • Leasureville is located in Butler County
    • Kepples Corners
      (11 miles [17.7 km] to the northwest)
      • Jump to our Gazetteer entry for Kepples Corners
      • Kepples Corners is located in Butler County
    • Chicora
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Chicora have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chicora
      • Chicora is located in Butler County
      • Population from the 2020 Census: 956 people
      • Jump to TripAdvisor's Tourism page for Chicora <3>
    • Millerstown
      (12 miles [19.3 km] to the northwest)
      • Jump to our Gazetteer entry for Millerstown
      • Millerstown is located in Butler County
    • Saint Joe
      (12 miles [19.3 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Saint Joe. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Saint Joe
      • Saint Joe is located in Butler County
    • Karns City
      (13 miles [20.9 km] to the northwest)
    • Monroe
      (13 miles [20.9 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Monroe. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Monroe
      • Monroe is located in Butler County
    • Great Belt
      (13 miles [20.9 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Great Belt. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Great Belt
      • Great Belt is located in Butler County
    • North Oakland
      (13 miles [20.9 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for North Oakland. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for North Oakland
      • North Oakland is located in Butler County
    • Petrolia
      (14 miles [22.5 km] to the northwest)
      • Jump to our Gazetteer entry for Petrolia
      • Petrolia is located in Butler County
      • Population from the 2020 Census: 197 people
    • Herman
      (14 miles [22.5 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Herman. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Herman
      • Herman is located in Butler County
      • Jump to TripAdvisor's Tourism page for Herman <3>
  • Clarion County
    • The following are listed by their distance from Furnace Run, with the one closest to Furnace Run listed first.
    • Phillipston
      (8 miles [12.9 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Phillipston. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Phillipston
      • Phillipston is located in Clarion County
    • East Brady
      (9 miles [14.5 km] to the north)
      • Note: The GPS coordinates that we are using for East Brady have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Brady
      • East Brady is located in Clarion County
      • Population from the 2020 Census: 904 people
      • Jump to TripAdvisor's Tourism page for East Brady <3>
    • Catfish
      (10 miles [16.1 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Catfish. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Catfish
      • Catfish is located in Clarion County
    • Lawsonham
      (10 miles [16.1 km] to the north)
      • Jump to our Gazetteer entry for Lawsonham
      • Lawsonham is located in Clarion County
    • Bela
      (13 miles [20.9 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Bela. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Bela
      • Bela is located in Clarion County
    • Rimersburg
      (13 miles [20.9 km] to the north)
      • Note: The GPS coordinates that we are using for Rimersburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rimersburg
      • Rimersburg is located in Clarion County
      • Population from the 2020 Census: 878 people
      • Jump to TripAdvisor's Tourism page for Rimersburg <3>
    • Leatherwood
      (14 miles [22.5 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Leatherwood. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Leatherwood
      • Leatherwood is located in Clarion County
    • Toby
      (15 miles [24.1 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Toby. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Toby
      • Toby is located in Clarion County
    • New Bethlehem
      (15 miles [24.1 km] to the northeast)
    • Fairmont City
      (16 miles [25.7 km] to the northeast)
    • Piolett
      (16 miles [25.7 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Piolett. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Piolett
      • Piolett is located in Clarion County
    • Curllsville
      (17 miles [27.4 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Curllsville. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Curllsville
      • Curllsville is located in Clarion County
    • Sligo
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Sligo have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sligo
      • Sligo is located in Clarion County
      • Population from the 2020 Census: 663 people
      • Jump to TripAdvisor's Tourism page for Sligo <3>
  • Indiana County
    • The following are listed by their distance from Furnace Run, with the one closest to Furnace Run listed first.
    • Beyer
      (18 miles [29 km] to the east)
      • Jump to our Gazetteer entry for Beyer
      • Beyer is located in Indiana County
    • Shelocta
      (18 miles [29 km] to the southeast)
    • Smicksburg
      (19 miles [30.6 km] to the east)
      • Note: The GPS coordinates that we are using for Smicksburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Smicksburg
      • Smicksburg is located in Indiana County
      • Population from the 2020 Census: 42 people
      • Jump to TripAdvisor's Tourism page for Smicksburg <3>
    • Willet
      (19 miles [30.6 km] to the southeast)
      • Jump to our Gazetteer entry for Willet
      • Willet is located in Indiana County
    • Plumville
      (20 miles [32.2 km] to the east)
      • Note: The GPS coordinates that we are using for Plumville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Plumville
      • Plumville is located in Indiana County
      • Population from the 2020 Census: 286 people
    • Parkwood
      (20 miles [32.2 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Parkwood. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Parkwood
      • Parkwood is located in Indiana County
    • West Lebanon
      (20 miles [32.2 km] to the southeast)
      • Jump to our Gazetteer entry for West Lebanon
      • West Lebanon is located in Indiana County
    • Davis
      (21 miles [33.8 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Davis. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Davis
      • Davis is located in Indiana County
    • Creekside
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Creekside have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Creekside
      • Creekside is located in Indiana County
      • Population from the 2020 Census: 288 people
    • Chambersville
      (22 miles [35.4 km] to the southeast)
      • Jump to our Gazetteer entry for Chambersville
      • Chambersville is located in Indiana County
    • Saltsburg
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Saltsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saltsburg
      • Saltsburg is located in Indiana County
      • Population from the 2020 Census: 800 people
      • Jump to TripAdvisor's Tourism page for Saltsburg <3>
    • Ambrose
      (23 miles [37 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Ambrose. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Ambrose
      • Ambrose is located in Indiana County
    • Clarksburg
      (23 miles [37 km] to the south)
  • Jefferson County
    • The following are listed by their distance from Furnace Run, with the one closest to Furnace Run listed first.
    • Langville
      (23 miles [37 km] to the northeast)
      • Jump to our Gazetteer entry for Langville
      • Langville is located in Jefferson County
    • Pansy
      (24 miles [38.6 km] to the northeast)
      • Jump to our Gazetteer entry for Pansy
      • Pansy is located in Jefferson County
    • Timblin
      (24 miles [38.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Timblin have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Timblin
      • Timblin is located in Jefferson County
      • Population from the 2020 Census: 145 people
    • Worthville
      (24 miles [38.6 km] to the northeast)
      • Jump to our Gazetteer entry for Worthville
      • Worthville is located in Jefferson County
      • Population from the 2020 Census: 65 people
    • Ohl
      (25 miles [40.2 km] to the northeast)
      • Jump to our Gazetteer entry for Ohl
      • Ohl is located in Jefferson County
    • Summerville
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Summerville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Summerville
      • Summerville is located in Jefferson County
      • Population from the 2020 Census: 501 people
    • Coolspring
      (27 miles [43.5 km] to the northeast)
    • Oliveburg
      (28 miles [45.1 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Oliveburg. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Oliveburg
      • Oliveburg is located in Jefferson County
    • Corsica
      (28 miles [45.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Corsica have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Corsica
      • Corsica is located in Jefferson County
      • Population from the 2020 Census: 342 people
    • Punxsutawney
      (30 miles [48.3 km] to the east)
    • Green Valley
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Green Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Green Valley
      • Green Valley is located in Jefferson County
  • Venango County
    • The following are listed by their distance from Furnace Run, with the one closest to Furnace Run listed first.
    • Eakin Corner
      (26 miles [41.8 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Eakin Corner. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Eakin Corner
      • Eakin Corner is located in Venango County
    • Emlenton
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Emlenton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Emlenton
      • Emlenton is located in Venango County
      • Population from the 2020 Census: 567 people
      • Jump to TripAdvisor's Tourism page for Emlenton <3>
    • Nickleville
      (29 miles [46.7 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Nickleville. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Nickleville
      • Nickleville is located in Venango County
    • Clintonville
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Clintonville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clintonville
      • Clintonville is located in Venango County
      • Population from the 2020 Census: 462 people
      • Jump to TripAdvisor's Tourism page for Clintonville <3>
    • Nectarine
      (30 miles [48.3 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Nectarine. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Nectarine
      • Nectarine is located in Venango County
    • Saint George
      (30 miles [48.3 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Saint George. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Saint George
      • Saint George is located in Venango County
  • Westmoreland County
    • The following are listed by their distance from Furnace Run, with the one closest to Furnace Run listed first.
    • Bagdad
      (14 miles [22.5 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Bagdad. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Bagdad
      • Bagdad is located in Westmoreland County
    • Hyde Park
      (15 miles [24.1 km] to the south)
      • Note: The GPS coordinates that we are using for Hyde Park have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hyde Park
      • Hyde Park is located in Westmoreland County
      • Population from the 2020 Census: 467 people
      • Jump to TripAdvisor's Tourism page for Hyde Park <3>
    • West Leechburg
      (15 miles [24.1 km] to the south)
      • Note: The GPS coordinates that we are using for West Leechburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Leechburg
      • West Leechburg is located in Westmoreland County
      • Population from the 2020 Census: 1,211 people
    • Weinel Crossroads
      (16 miles [25.7 km] to the south)
      • Jump to our Gazetteer entry for Weinel Crossroads
      • Weinel Crossroads is located in Westmoreland County
    • East Vandergrift
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for East Vandergrift have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Vandergrift
      • East Vandergrift is located in Westmoreland County
      • Population from the 2020 Census: 631 people
    • Vandergrift
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Vandergrift have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vandergrift
      • Vandergrift is located in Westmoreland County
      • Population from the 2020 Census: 4,832 people
      • Jump to TripAdvisor's Tourism page for Vandergrift <3>
    • Oklahoma
      (18 miles [29 km] to the south)
      • Note: The GPS coordinates that we are using for Oklahoma have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oklahoma
      • Oklahoma is located in Westmoreland County
      • Population from the 2020 Census: 739 people
    • Lower Burrell
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lower Burrell have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lower Burrell
      • Lower Burrell is located in Westmoreland County
      • Population from the 2020 Census: 10,997 people
      • Jump to TripAdvisor's Tourism page for Lower Burrell <3>
    • Arnold
      (21 miles [33.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Arnold have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Arnold
      • Arnold is located in Westmoreland County
      • Population from the 2020 Census: 4,790 people
      • Jump to TripAdvisor's Tourism page for Arnold <3>
    • Avonmore
      (22 miles [35.4 km] to the south)
    • Salina
      (22 miles [35.4 km] to the south)
    • New Kensington
      (22 miles [35.4 km] to the southwest)
    • Franklin
      (27 miles [43.5 km] to the south)
      • Jump to our Gazetteer entry for Franklin
      • Franklin is located in Westmoreland County

For an expanded list of the communities that are closest to Furnace Run, see our County-by-County Page for Furnace Run.

Cemeteries Near Furnace Run ...

Below are cemeteries that are in the vicinity of Furnace Run.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Furnace Run covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Furnace Run, with the one closest to Furnace Run listed first.

  • St. Marys Cemetery
    (Less than 2 miles to the southeast)
    • Jump to our Gazetteer entry for the St. Marys Cemetery
    • Note: The GPS coordinates that we are using for the St. Marys Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Lawnhaven Cemetery
    (2 miles [3.2 km] to the southwest)
    • Jump to our Gazetteer entry for the Lawnhaven Cemetery
    • Note: The GPS coordinates that we are using for the Lawnhaven Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Kittanning Cemetery
    (2 miles [3.2 km] to the southeast)
  • St. Joseph Cemetery
    (2 miles [3.2 km] to the southeast)
  • Croyle Cemetery
    (2 miles [3.2 km] to the northeast)
    • Jump to our Gazetteer entry for the Croyle Cemetery
    • Note: The GPS coordinates that we are using for the Croyle Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Worthington Evangelical Lutheran Cemetery
    (4 miles [6.4 km] to the west)
  • Cowan Cemetery
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for the Cowan Cemetery
    • Note: The GPS coordinates that we are using for the Cowan Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Brush Valley Brethren Church Cemetery
    (4 miles [6.4 km] to the northeast)
  • Cochran Cemetery
    (5 miles [8 km] to the northeast)
    • Jump to our Gazetteer entry for the Cochran Cemetery
    • Note: The GPS coordinates that we are using for the Cochran Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Holy Trinity Cemetery
    (6 miles [9.7 km] to the south)
    • Jump to our Gazetteer entry for the Holy Trinity Cemetery
    • Note: The GPS coordinates that we are using for the Holy Trinity Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • St. Marys Cemetery
    (6 miles [9.7 km] to the south)
    • Jump to our Gazetteer entry for the St. Marys Cemetery
    • Note: The GPS coordinates that we are using for the St. Marys Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Ford City Cemetery
    (7 miles [11.3 km] to the south)
    • Jump to our Gazetteer entry for the Ford City Cemetery
    • Note: The GPS coordinates that we are using for the Ford City Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Continue List   (204 more) ...
    • Ukrainian Cemetery
      (7 miles [11.3 km] to the south)
      • Jump to our Gazetteer entry for the Ukrainian Cemetery
      • Note: The GPS coordinates that we are using for the Ukrainian Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Mateer Cemetery
      (7 miles [11.3 km] to the east)
    • St. Eusebius Cemetery
      (9 miles [14.5 km] to the north)
      • Jump to our Gazetteer entry for the St. Eusebius Cemetery
      • Note: The GPS coordinates that we are using for the St. Eusebius Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

While we didn't find Furnace Run in the Atlas, the following 1895 communities would have been found near the current location of Furnace Run.

These communities are listed based on their distance from Furnace Run, with the one closest to Furnace Run listed first.

  • Walkchalk
    (Less than 2 miles to the southwest)
    • Jump to our Gazetteer entry for Walkchalk
    • Walkchalk is located in Armstrong County
  • Ewing
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for Ewing have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ewing
    • Ewing is located in Armstrong County
  • Kittanning
    (2 miles [3.2 km] to the southeast)
  • Gosford
    (2 miles [3.2 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Gosford. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Gosford
    • Gosford is located in Armstrong County
  • Adrian
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for Adrian have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Adrian
    • Adrian is located in Armstrong County
  • Cowansville
    (3 miles [4.8 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Cowansville. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Cowansville
    • Cowansville is located in Armstrong County
    • Jump to TripAdvisor's Tourism page for Cowansville <3>
  • Worthington
    (4 miles [6.4 km] to the west)
  • McHaddon
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for McHaddon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McHaddon
    • McHaddon is located in Armstrong County
  • Manorville
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for Manorville
    • Manorville is located in Armstrong County
    • Population from the 2020 Census: 383 people
  • Mosgrove
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for Mosgrove have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mosgrove
    • Mosgrove is located in Armstrong County
  • Sherrett
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Sherrett have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sherrett
    • Sherrett is located in Armstrong County
  • Ford City
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Ford City have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ford City
    • Ford City is located in Armstrong County
    • Population from the 2020 Census: 2,735 people
    • Jump to TripAdvisor's Tourism page for Ford City <3>
  • Continue List   (15 more) ...
    • Rimer
      (5 miles [8 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Rimer. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Rimer
      • Rimer is located in Armstrong County
    • Fosters Mills
      (5 miles [8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Fosters Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fosters Mills
      • Fosters Mills is located in Armstrong County
    • Craigsville
      (5 miles [8 km] to the west)
      • Note: The GPS coordinates that we are using for Craigsville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Craigsville
      • Craigsville is located in Armstrong County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Furnace Run. See our List of 1890's Communities around Furnace Run.

Newspapers Published in Furnace Run ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 32 newspapers that have been published in the area around Furnace Run.

Although we're unaware of any newspapers that were published in the immediate area of Furnace Run, there are papers which were published within 13 miles [20.9 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Furnace Run.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Furnace Run:

Unfortunately, we don't know of a website for Furnace Run. If you can help, please contact us through our Feedback Page.

The official website for Commonwealth of Pennsylvania: https://www.pa.gov/

Footnotes ...

<1>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Furnace Run, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Furnace Run) to Point B.Our distance measurements begin at a specific point in Furnace Run. The point we use is located at these GPS coordinates - Latitude: 40.8528, Longitude: -79.5498       In this case, the coordinates for Furnace Run have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025