TripAdvisor Links
Introduction ...
When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
While we are unaware of a TripAdvisor Tourism page that is specific to Shoals, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Shoals - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 31 communities listed:
- Antlers
(26 miles [41.8 km] to the northwest)
- Arthur City
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Arthur City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arthur City
- Arthur City is located in Lamar County (TX)
- Jump to TripAdvisor's Tourism page for Arthur City <2>
- Bagwell
(21 miles [33.8 km] to the southeast)
- Blossom
(16 miles [25.7 km] to the south)
- Boswell
(28 miles [45.1 km] to the west)
- Brookston
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Brookston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brookston
- Brookston is located in Lamar County (TX)
- Jump to TripAdvisor's Tourism page for Brookston <2>
- Chicota
(10 miles [16.1 km] to the west)
- Clarksville
(28 miles [45.1 km] to the southeast)
- Deport
(25 miles [40.2 km] to the south)
- Detroit
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Detroit have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Detroit
- Detroit is located in Red River County (TX)
- Population from the 2020 Census: 684 people
- Jump to TripAdvisor's Tourism page for Detroit <2>
- Finley
(30 miles [48.3 km] to the north)
- Fort Towson
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Fort Towson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Towson
- Fort Towson is located in Choctaw County
- Population from the 2020 Census: 487 people
- Jump to TripAdvisor's Tourism page for Fort Towson <2>
- Garvin
(26 miles [41.8 km] to the east)
- Golden
(30 miles [48.3 km] to the east)
- Grant
(7 miles [11.3 km] to the northwest)
- Hugo
(10 miles [16.1 km] to the northwest)
- Millerton
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Millerton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millerton
- Millerton is located in McCurtain County
- Population from the 2020 Census: 313 people
- Jump to TripAdvisor's Tourism page for Millerton <2>
- Paris
(18 miles [29 km] to the southwest)
- Pattonville
(22 miles [35.4 km] to the south)
- Powderly
(9 miles [14.5 km] to the southwest)
- Rattan
(20 miles [32.2 km] to the north)
- Ringold
(26 miles [41.8 km] to the northeast)
- Roxton
(30 miles [48.3 km] to the southwest)
- Rufe
(21 miles [33.8 km] to the northeast)
- Sawyer
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Sawyer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sawyer
- Sawyer is located in Choctaw County
- Population from the 2020 Census: 327 people
- Jump to TripAdvisor's Tourism page for Sawyer <2>
- Soper
(19 miles [30.6 km] to the northwest)
- Spencerville
(17 miles [27.4 km] to the north)
- Sumner
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Sumner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sumner
- Sumner is located in Lamar County (TX)
- Jump to TripAdvisor's Tourism page for Sumner <2>
- Swink
(13 miles [20.9 km] to the northeast)
- Valliant
(18 miles [29 km] to the northeast)
- Wright City
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Wright City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wright City
- Wright City is located in McCurtain County
- Population from the 2020 Census: 730 people
- Jump to TripAdvisor's Tourism page for Wright City <2>
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Shoals. If you can help, please contact us through our Feedback Page.
The official website for State of Oklahoma: https://www.ok.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Shoals) to Point B.Our distance measurements begin at a specific point in Shoals. The point we use is located at these GPS coordinates - Latitude: 33.8979, Longitude: -95.3977 In this case, the coordinates for Shoals have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |