RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Noble County >> Steamtown >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Ohio

The Commemorative Quarter for Ohio





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Steamtown (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Steamtown. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Steamtown is located in Noble County.

To see how the shape of Ohio's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Noble County: Belmont, Guernsey, Monroe, Morgan, Muskingum & Washington.

Below are the counties that are near Steamtown. For each of these counties, we show a sample of those communities that are closest to Steamtown:

  • Noble County     (The home county of Steamtown)
    • The following are listed by their distance from Steamtown, with the one closest to Steamtown listed first.
    • Whigville
      (Less than 2 miles to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Whigville. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Whigville
      • Whigville is located in Noble County
    • Summerfield
      (Less than 2 miles to the southeast)
      • Note: The GPS coordinates that we are using for Summerfield have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Summerfield
      • Summerfield is located in Noble County
      • Population from the 2020 Census: 248 people
    • Mount Ephraim
      (3 miles [4.8 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Mount Ephraim. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Mount Ephraim
      • Mount Ephraim is located in Noble County
    • Mud Run
      (4 miles [6.4 km] to the north)
      • Jump to our Gazetteer entry for Mud Run
      • Mud Run is located in Noble County
    • Sarahsville
      (5 miles [8 km] to the west)
      • Jump to our Gazetteer entry for Sarahsville
      • Sarahsville is located in Noble County
      • Population from the 2020 Census: 171 people
    • Kennonsburg
      (6 miles [9.7 km] to the north)
      • Jump to our Gazetteer entry for Kennonsburg
      • Kennonsburg is located in Noble County
    • Batesville
      (7 miles [11.3 km] to the northeast)
      • Jump to our Gazetteer entry for Batesville
      • Batesville is located in Noble County
      • Population from the 2020 Census: 98 people
    • Fulda
      (7 miles [11.3 km] to the southwest)
      • Jump to our Gazetteer entry for Fulda
      • Fulda is located in Noble County
    • Ashton
      (8 miles [12.9 km] to the southwest)
      • Jump to our Gazetteer entry for Ashton
      • Ashton is located in Noble County
    • Mount Zion
      (9 miles [14.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Mount Zion. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Mount Zion
      • Mount Zion is located in Noble County
    • Caldwell
      (9 miles [14.5 km] to the southwest)
    • Belle Valley
      (10 miles [16.1 km] to the west)
    • Dexter City
      (12 miles [19.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Dexter City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dexter City
      • Dexter City is located in Noble County
      • Population from the 2020 Census: 124 people
  • Belmont County
    • The following are listed by their distance from Steamtown, with the one closest to Steamtown listed first.
    • Barnesville
      (15 miles [24.1 km] to the northeast)
    • Hunter
      (18 miles [29 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Hunter. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Hunter
      • Hunter is located in Belmont County
    • Hendrysburg
      (19 miles [30.6 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Hendrysburg. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Hendrysburg
      • Hendrysburg is located in Belmont County
    • Bethesda
      (20 miles [32.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Bethesda have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bethesda
      • Bethesda is located in Belmont County
      • Population from the 2020 Census: 1,198 people
      • Jump to TripAdvisor's Tourism page for Bethesda <3>
    • Belmont
      (22 miles [35.4 km] to the northeast)
    • Morristown
      (22 miles [35.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Morristown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morristown
      • Morristown is located in Belmont County
      • Population from the 2020 Census: 285 people
    • Armstrongs Mills
      (23 miles [37 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Armstrongs Mills. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Armstrongs Mills
      • Armstrongs Mills is located in Belmont County
    • Loomis
      (23 miles [37 km] to the northeast)
      • Jump to our Gazetteer entry for Loomis
      • Loomis is located in Belmont County
    • Captina
      (26 miles [41.8 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Captina. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Captina
      • Captina is located in Belmont County
    • Holloway
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Holloway have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Holloway
      • Holloway is located in Belmont County
      • Population from the 2020 Census: 311 people
    • Jacobsburg
      (26 miles [41.8 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Jacobsburg. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Jacobsburg
      • Jacobsburg is located in Belmont County
    • Rock Hill
      (26 miles [41.8 km] to the northeast)
      • Jump to our Gazetteer entry for Rock Hill
      • Rock Hill is located in Belmont County
    • Warnock
      (26 miles [41.8 km] to the northeast)
      • Jump to our Gazetteer entry for Warnock
      • Warnock is located in Belmont County
  • Guernsey County
    • The following are listed by their distance from Steamtown, with the one closest to Steamtown listed first.
    • Senecaville
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Senecaville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Senecaville
      • Senecaville is located in Guernsey County
      • Population from the 2020 Census: 447 people
      • Jump to TripAdvisor's Tourism page for Senecaville <3>
    • Salesville
      (10 miles [16.1 km] to the north)
      • Note: The GPS coordinates that we are using for Salesville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Salesville
      • Salesville is located in Guernsey County
      • Estimated population in 2016: 126 people
      • Jump to TripAdvisor's Tourism page for Salesville <3>
    • Buffalo
      (10 miles [16.1 km] to the northwest)
    • Gibson
      (11 miles [17.7 km] to the north)
      • Jump to our Gazetteer entry for Gibson
      • Gibson is located in Guernsey County
    • Quaker City
      (11 miles [17.7 km] to the north)
    • Pleasant City
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Pleasant City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pleasant City
      • Pleasant City is located in Guernsey County
      • Population from the 2020 Census: 422 people
      • Jump to TripAdvisor's Tourism page for Pleasant City <3>
    • Lore City
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Lore City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lore City
      • Lore City is located in Guernsey County
      • Population from the 2020 Census: 309 people
      • Jump to TripAdvisor's Tourism page for Lore City <3>
    • Bluebell
      (13 miles [20.9 km] to the northwest)
      • Jump to our Gazetteer entry for Bluebell
      • Bluebell is located in Guernsey County
      • Bluebell has also been known as:
      • Opperman
    • Byesville
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Byesville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Byesville
      • Byesville is located in Guernsey County
      • Population from the 2020 Census: 2,345 people
      • Jump to TripAdvisor's Tourism page for Byesville <3>
    • Easton ‑ Historic
      (15 miles [24.1 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Easton. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Easton
      • Easton is located in Guernsey County
    • Elizabethtown
      (15 miles [24.1 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Elizabethtown. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Elizabethtown
      • Elizabethtown is located in Guernsey County
    • Old Washington
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Old Washington have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Old Washington
      • Old Washington is located in Guernsey County
      • Population from the 2020 Census: 267 people
      • Jump to TripAdvisor's Tourism page for Old Washington <3>
    • Spring Valley
      (15 miles [24.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Spring Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spring Valley
      • Spring Valley is located in Guernsey County
  • Harrison County
    • Freeport
      (27 miles [43.5 km] to the north)
  • Monroe County
    • The following are listed by their distance from Steamtown, with the one closest to Steamtown listed first.
    • Lewisville
      (8 miles [12.9 km] to the southeast)
      • Jump to our Gazetteer entry for Lewisville
      • Lewisville is located in Monroe County
      • Population from the 2020 Census: 162 people
    • Stafford
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Stafford have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stafford
      • Stafford is located in Monroe County
      • Population from the 2020 Census: 74 people
    • Miltonsburg
      (10 miles [16.1 km] to the east)
      • Note: The GPS coordinates that we are using for Miltonsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Miltonsburg
      • Miltonsburg is located in Monroe County
      • Population from the 2020 Census: 41 people
    • Edwina
      (12 miles [19.3 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Edwina. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Edwina
      • Edwina is located in Monroe County
    • Woodsfield
      (13 miles [20.9 km] to the east)
    • Jerusalem
      (14 miles [22.5 km] to the east)
      • Note: The GPS coordinates that we are using for Jerusalem have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jerusalem
      • Jerusalem is located in Monroe County
      • Population from the 2020 Census: 149 people
    • Ozark
      (14 miles [22.5 km] to the east)
      • Jump to our Gazetteer entry for Ozark
      • Ozark is located in Monroe County
    • Graysville
      (14 miles [22.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Graysville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Graysville
      • Graysville is located in Monroe County
      • Population from the 2020 Census: 71 people
    • Wilson
      (15 miles [24.1 km] to the east)
      • Note: The GPS coordinates that we are using for Wilson have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wilson
      • Wilson is located in Monroe County
      • Population from the 2020 Census: 116 people
    • Coats
      (16 miles [25.7 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Coats. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Coats
      • Coats is located in Monroe County
    • Plainview
      (16 miles [25.7 km] to the southeast)
      • Jump to our Gazetteer entry for Plainview
      • Plainview is located in Monroe County
    • Beallsville
      (17 miles [27.4 km] to the east)
      • Note: The GPS coordinates that we are using for Beallsville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beallsville
      • Beallsville is located in Monroe County
      • Population from the 2020 Census: 376 people
    • Mount Carrick
      (17 miles [27.4 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Mount Carrick. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Mount Carrick
      • Mount Carrick is located in Monroe County
  • Morgan County
    • The following are listed by their distance from Steamtown, with the one closest to Steamtown listed first.
    • Reinersville
      (18 miles [29 km] to the southwest)
      • Jump to our Gazetteer entry for Reinersville
      • Reinersville is located in Morgan County
    • Hackney
      (21 miles [33.8 km] to the southwest)
      • Jump to our Gazetteer entry for Hackney
      • Hackney is located in Morgan County
    • Neelysville
      (25 miles [40.2 km] to the southwest)
      • Jump to our Gazetteer entry for Neelysville
      • Neelysville is located in Morgan County
    • McConnelsville
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for McConnelsville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McConnelsville
      • McConnelsville is located in Morgan County
      • Population from the 2020 Census: 1,720 people
      • Jump to TripAdvisor's Tourism page for McConnelsville <3>
    • Malta
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Malta have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Malta
      • Malta is located in Morgan County
      • Population from the 2020 Census: 631 people
      • Jump to TripAdvisor's Tourism page for Malta <3>
    • Stockport
      (29 miles [46.7 km] to the southwest)
    • Eagleport
      (29 miles [46.7 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Eagleport. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Eagleport
      • Eagleport is located in Morgan County
  • Muskingum County
    • The following are listed by their distance from Steamtown, with the one closest to Steamtown listed first.
    • Rix Mills
      (21 miles [33.8 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Rix Mills. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Rix Mills
      • Rix Mills is located in Muskingum County
    • New Concord
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for New Concord have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Concord
      • New Concord is located in Muskingum County
      • Population from the 2020 Census: 2,165 people
      • Jump to TripAdvisor's Tourism page for New Concord <3>
    • Museville
      (23 miles [37 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Museville. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Museville
      • Museville is located in Muskingum County
    • Norwich
      (25 miles [40.2 km] to the northwest)
    • McDonald
      (26 miles [41.8 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for McDonald. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for McDonald
      • McDonald is located in Muskingum County
    • Seawright ‑ Historic
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Seawright have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Seawright
      • Seawright is located in Muskingum County
    • Blue Rock
      (28 miles [45.1 km] to the west)
    • Philo
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Philo have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Philo
      • Philo is located in Muskingum County
      • Population from the 2020 Census: 728 people
      • Jump to TripAdvisor's Tourism page for Philo <3>
    • White Eyes Town ‑ Historic
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for White Eyes Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for White Eyes Town
      • White Eyes Town is located in Muskingum County
  • Tuscarawas County
    • The following are listed by their distance from Steamtown, with the one closest to Steamtown listed first.
    • Peoli
      (28 miles [45.1 km] to the north)
      • Jump to our Gazetteer entry for Peoli
      • Peoli is located in Tuscarawas County
    • West Chester
      (28 miles [45.1 km] to the north)
      • Jump to our Gazetteer entry for West Chester
      • West Chester is located in Tuscarawas County
    • Postboy
      (30 miles [48.3 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Postboy. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Postboy
      • Postboy is located in Tuscarawas County
  • Washington County
    • The following are listed by their distance from Steamtown, with the one closest to Steamtown listed first.
    • Macksburg
      (13 miles [20.9 km] to the south)
    • Elba
      (14 miles [22.5 km] to the south)
      • Jump to our Gazetteer entry for Elba
      • Elba is located in Washington County
    • Dalzell
      (17 miles [27.4 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Dalzell. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Dalzell
      • Dalzell is located in Washington County
    • Lower Salem
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Lower Salem have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lower Salem
      • Lower Salem is located in Washington County
      • Population from the 2020 Census: 82 people
    • Warner
      (17 miles [27.4 km] to the south)
      • Jump to our Gazetteer entry for Warner
      • Warner is located in Washington County
    • Muskingum ‑ Historic
      (19 miles [30.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Muskingum have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Muskingum
      • Muskingum is located in Washington County
    • Gasville
      (20 miles [32.2 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Gasville. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Gasville
      • Gasville is located in Washington County
    • Whipple
      (20 miles [32.2 km] to the south)
      • Jump to our Gazetteer entry for Whipple
      • Whipple is located in Washington County
    • Lowell
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Lowell have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lowell
      • Lowell is located in Washington County
      • Population from the 2020 Census: 529 people
      • Jump to TripAdvisor's Tourism page for Lowell <3>
    • Steel Run
      (22 miles [35.4 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Steel Run. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Steel Run
      • Steel Run is located in Washington County
    • Beverly
      (23 miles [37 km] to the southwest)
      • Note: The GPS coordinates that we are using for Beverly have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beverly
      • Beverly is located in Washington County
      • Population from the 2020 Census: 1,336 people
      • Jump to TripAdvisor's Tourism page for Beverly <3>
    • Alden
      (24 miles [38.6 km] to the south)
      • Jump to our Gazetteer entry for Alden
      • Alden is located in Washington County
    • Devola
      (24 miles [38.6 km] to the south)
      • Note: The GPS coordinates that we are using for Devola have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Devola
      • Devola is located in Washington County
  • Marshall County (WV)
    • Kent
      (26 miles [41.8 km] to the east)
      • Jump to our Gazetteer entry for Kent
      • Kent is located in Marshall County (WV)
  • Pleasants County (WV)
    • The following are listed by their distance from Steamtown, with the one closest to Steamtown listed first.
    • Belmont
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Belmont have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belmont
      • Belmont is located in Pleasants County (WV)
      • Population from the 2020 Census: 853 people
    • DeLong
      (30 miles [48.3 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for DeLong. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for DeLong
      • DeLong is located in Pleasants County (WV)
    • Saint Marys
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Saint Marys have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Marys
      • Saint Marys is located in Pleasants County (WV)
      • Population from the 2020 Census: 1,757 people
      • Jump to TripAdvisor's Tourism page for Saint Marys <3>
  • Tyler County (WV)
    • The following are listed by their distance from Steamtown, with the one closest to Steamtown listed first.
    • Friendly
      (26 miles [41.8 km] to the southeast)
      • Jump to our Gazetteer entry for Friendly
      • Friendly is located in Tyler County (WV)
      • Population from the 2020 Census: 120 people
    • Paden City
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Paden City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Paden City
      • Paden City is located in Tyler County (WV)
      • Population from the 2020 Census: 2,296 people
      • Jump to TripAdvisor's Tourism page for Paden City <3>
    • Sistersville
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Sistersville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sistersville
      • Sistersville is located in Tyler County (WV)
      • Population from the 2020 Census: 1,267 people
      • Jump to TripAdvisor's Tourism page for Sistersville <3>
    • Adonis
      (29 miles [46.7 km] to the southeast)
      • Jump to our Gazetteer entry for Adonis
      • Adonis is located in Tyler County (WV)
  • Wetzel County (WV)
    • The following are listed by their distance from Steamtown, with the one closest to Steamtown listed first.
    • Proctor
      (29 miles [46.7 km] to the east)
    • New Martinsville
      (29 miles [46.7 km] to the southeast)
  • Wood County (WV)
    • Williamstown
      (29 miles [46.7 km] to the south)

For an expanded list of the communities that are closest to Steamtown, see our County-by-County Page for Steamtown.

Cemeteries Near Steamtown ...

Below are cemeteries that are in the vicinity of Steamtown.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Steamtown covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Steamtown, with the one closest to Steamtown listed first.

  • Allens Chapel Cemetery
    (Less than 2 miles to the southwest)
    • Jump to our Gazetteer entry for the Allens Chapel Cemetery
    • Note: The GPS coordinates that we are using for the Allens Chapel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Whigville Cemetery
    (Less than 2 miles to the northwest)
    • Jump to our Gazetteer entry for the Whigville Cemetery
    • Note: The GPS coordinates that we are using for the Whigville Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Danford Cemetery
    (2 miles [3.2 km] to the east)
    • Jump to our Gazetteer entry for the Danford Cemetery
    • Note: The GPS coordinates that we are using for the Danford Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Watson Cemetery
    (2 miles [3.2 km] to the north)
  • East Union Cemetery
    (3 miles [4.8 km] to the southwest)
    • Jump to our Gazetteer entry for the East Union Cemetery
    • Note: The GPS coordinates that we are using for the East Union Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Aaron Cemetery
    (3 miles [4.8 km] to the northeast)
    • Jump to our Gazetteer entry for the Aaron Cemetery
    • Note: The GPS coordinates that we are using for the Aaron Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Hannash Cemetery
    (3 miles [4.8 km] to the northeast)
    • Jump to our Gazetteer entry for the Hannash Cemetery
    • Note: The GPS coordinates that we are using for the Hannash Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Bethesda Cemetery
    (3 miles [4.8 km] to the north)
    • Jump to our Gazetteer entry for the Bethesda Cemetery
    • Note: The GPS coordinates that we are using for the Bethesda Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Old Mt. Ephriam Cemetery
    (3 miles [4.8 km] to the northwest)
    • Jump to our Gazetteer entry for the Old Mt. Ephriam Cemetery
    • Note: The GPS coordinates that we are using for the Old Mt. Ephriam Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Archer Cemetery
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for the Archer Cemetery
    • Note: The GPS coordinates that we are using for the Archer Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Curtis Ridge Cemetery
    (4 miles [6.4 km] to the south)
  • Archers Ridge Cemetery
    (5 miles [8 km] to the southwest)
    • Jump to our Gazetteer entry for the Archers Ridge Cemetery
    • Note: The GPS coordinates that we are using for the Archers Ridge Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Continue List   (628 more) ...
    • Swazey Methodist Cemetery
      (5 miles [8 km] to the southeast)
      • Jump to our Gazetteer entry for the Swazey Methodist Cemetery
      • Note: The GPS coordinates that we are using for the Swazey Methodist Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Bracken Ridge Cemetery
      (5 miles [8 km] to the southeast)
      • Jump to our Gazetteer entry for the Bracken Ridge Cemetery
      • Note: The GPS coordinates that we are using for the Bracken Ridge Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Chapel Hill Cemetery
      (5 miles [8 km] to the east)
      • Jump to our Gazetteer entry for the Chapel Hill Cemetery
      • Note: The GPS coordinates that we are using for the Chapel Hill Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that in 1895, Steamtown had railroad service and no post office.

These communities are listed based on their distance from Steamtown, with the one closest to Steamtown listed first.

  • Summerfield
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for Summerfield have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Summerfield
    • Summerfield is located in Noble County
    • Population from the 2020 Census: 248 people
  • Whigville
    (Less than 2 miles to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Whigville. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Whigville
    • Whigville is located in Noble County
  • Doherty
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for Doherty have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Doherty
    • Doherty is located in Monroe County
  • Fredericksdale
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for Fredericksdale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fredericksdale
    • Fredericksdale is located in Noble County
  • Mount Ephraim
    (3 miles [4.8 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Mount Ephraim. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Mount Ephraim
    • Mount Ephraim is located in Noble County
  • Brister
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for Brister have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brister
    • Brister is located in Monroe County
  • Swazey
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Swazey have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Swazey
    • Swazey is located in Monroe County
  • Burkhart
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Burkhart have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Burkhart
    • Burkhart is located in Monroe County
  • Calais
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Calais have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Calais
    • Calais is located in Monroe County
  • Sarahsville
    (5 miles [8 km] to the west)
    • Jump to our Gazetteer entry for Sarahsville
    • Sarahsville is located in Noble County
    • Population from the 2020 Census: 171 people
  • Jerles ‑ Historic
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Jerles have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jerles
    • Jerles is located in Monroe County
  • Kennonsburg
    (6 miles [9.7 km] to the north)
    • Jump to our Gazetteer entry for Kennonsburg
    • Kennonsburg is located in Noble County
  • Continue List   (17 more) ...
    • Duvall
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Duvall have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Duvall
      • Duvall is located in Noble County
    • Fulda
      (7 miles [11.3 km] to the southwest)
      • Jump to our Gazetteer entry for Fulda
      • Fulda is located in Noble County
    • Cliffyville ‑ Historic
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for Cliffyville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cliffyville
      • Cliffyville is located in Noble County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Steamtown. See our List of 1890's Communities around Steamtown.

Newspapers Published in Steamtown ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 53 newspapers that have been published in the area around Steamtown.

Although we're unaware of any newspapers that were published in the immediate area of Steamtown, there are papers which were published within 17 miles [27.4 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Steamtown.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Steamtown:

Unfortunately, we don't know of a website for Steamtown. If you can help, please contact us through our Feedback Page.

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Steamtown, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Steamtown) to Point B.Our distance measurements begin at a specific point in Steamtown. The point we use is located at these GPS coordinates - Latitude: 39.8165, Longitude: -81.3598       In this case, the coordinates for Steamtown have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025