RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Hancock County >> Murphys >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Ohio

The Commemorative Quarter for Ohio





TripAdvisor Links

Introduction ...

When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

While we are unaware of a TripAdvisor Tourism page that is specific to Murphys, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Murphys - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 62 communities listed:

  • Ada
    (22 miles [35.4 km] to the south)
    • Note: The GPS coordinates that we are using for Ada have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ada
    • Ada is located in Hardin County
    • Population from the 2020 Census: 5,532 people
    • Jump to TripAdvisor's Tourism page for Ada <3>
  • Adrian
    (21 miles [33.8 km] to the east)
  • Alger
    (26 miles [41.8 km] to the south)
    • Note: The GPS coordinates that we are using for Alger have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Alger
    • Alger is located in Hardin County
    • Population from the 2020 Census: 835 people
    • Jump to TripAdvisor's Tourism page for Alger <3>
  • Arcadia
    (11 miles [17.7 km] to the east)
    • Note: The GPS coordinates that we are using for Arcadia have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Arcadia
    • Arcadia is located in Hancock County
    • Population from the 2020 Census: 587 people
    • Jump to TripAdvisor's Tourism page for Arcadia <3>
  • Arlington
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Arlington have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Arlington
    • Arlington is located in Hancock County
    • Population from the 2020 Census: 1,431 people
    • Jump to TripAdvisor's Tourism page for Arlington <3>
  • Bascom
    (23 miles [37 km] to the east)
  • Beaverdam
    (21 miles [33.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Beaverdam have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Beaverdam
    • Beaverdam is located in Allen County
    • Population from the 2020 Census: 369 people
    • Jump to TripAdvisor's Tourism page for Beaverdam <3>
  • Bettsville
    (27 miles [43.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bettsville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bettsville
    • Bettsville is located in Seneca County
    • Population from the 2020 Census: 618 people
    • Jump to TripAdvisor's Tourism page for Bettsville <3>
  • Bloomdale
    (10 miles [16.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bloomdale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bloomdale
    • Bloomdale is located in Wood County
    • Population from the 2020 Census: 682 people
    • Jump to TripAdvisor's Tourism page for Bloomdale <3>
  • Bluffton
    (15 miles [24.1 km] to the southwest)
  • Bowling Green
    (20 miles [32.2 km] to the north)
  • Bradner
    (22 miles [35.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bradner have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bradner
    • Bradner is located in Wood County
    • Population from the 2020 Census: 1,020 people
    • Jump to TripAdvisor's Tourism page for Bradner <3>
  • Carey
    (20 miles [32.2 km] to the southeast)
    • Jump to our Gazetteer entry for Carey
    • Carey is located in Wyandot County
    • Population from the 2020 Census: 3,540 people
    • Jump to TripAdvisor's Tourism page for Carey <3>
  • Columbus Grove
    (20 miles [32.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Columbus Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Columbus Grove
    • Columbus Grove is located in Putnam County
    • Population from the 2020 Census: 2,061 people
    • Jump to TripAdvisor's Tourism page for Columbus Grove <3>
  • Continental
    (28 miles [45.1 km] to the west)
    • Note: The GPS coordinates that we are using for Continental have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Continental
    • Continental is located in Putnam County
    • Population from the 2020 Census: 1,085 people
    • Jump to TripAdvisor's Tourism page for Continental <3>
  • Custar
    (15 miles [24.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Custar have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Custar
    • Custar is located in Wood County
    • Population from the 2020 Census: 184 people
    • Jump to TripAdvisor's Tourism page for Custar <3>
  • Cygnet
    (11 miles [17.7 km] to the north)
    • Note: The GPS coordinates that we are using for Cygnet have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cygnet
    • Cygnet is located in Wood County
    • Population from the 2020 Census: 622 people
    • Jump to TripAdvisor's Tourism page for Cygnet <3>
  • Deshler
    (12 miles [19.3 km] to the northwest)
  • Dola
    (20 miles [32.2 km] to the south)
    • Note: The GPS coordinates that we are using for Dola have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dola
    • Dola is located in Hardin County
    • Jump to TripAdvisor's Tourism page for Dola <3>
  • Dunkirk
    (20 miles [32.2 km] to the south)
    • Note: The GPS coordinates that we are using for Dunkirk have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dunkirk
    • Dunkirk is located in Hardin County
    • Population from the 2020 Census: 842 people
    • Jump to TripAdvisor's Tourism page for Dunkirk <3>
  • Dupont
    (29 miles [46.7 km] to the west)
    • Note: The GPS coordinates that we are using for Dupont have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dupont
    • Dupont is located in Putnam County
    • Population from the 2020 Census: 301 people
    • Jump to TripAdvisor's Tourism page for Dupont <3>
  • Findlay
    (4 miles [6.4 km] to the southeast)
  • Forest
    (22 miles [35.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Forest have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Forest
    • Forest is located in Hardin County
    • Population from the 2020 Census: 1,444 people
    • Jump to TripAdvisor's Tourism page for Forest <3>
  • Fostoria
    (17 miles [27.4 km] to the east)
  • Gibsonburg
    (29 miles [46.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Gibsonburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gibsonburg
    • Gibsonburg is located in Sandusky County
    • Population from the 2020 Census: 2,483 people
    • Jump to TripAdvisor's Tourism page for Gibsonburg <3>
  • Glandorf
    (18 miles [29 km] to the west)
    • Note: The GPS coordinates that we are using for Glandorf have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Glandorf
    • Glandorf is located in Putnam County
    • Population from the 2020 Census: 1,030 people
    • Jump to TripAdvisor's Tourism page for Glandorf <3>
  • Gomer
    (29 miles [46.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Gomer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gomer
    • Gomer is located in Allen County
    • Jump to TripAdvisor's Tourism page for Gomer <3>
  • Grand Rapids
    (23 miles [37 km] to the north)
    • Note: The GPS coordinates that we are using for Grand Rapids have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grand Rapids
    • Grand Rapids is located in Wood County
    • Population from the 2020 Census: 1,006 people
    • Jump to TripAdvisor's Tourism page for Grand Rapids <3>
  • Hamler
    (18 miles [29 km] to the northwest)
  • Harrod
    (27 miles [43.5 km] to the south)
  • Haskins
    (26 miles [41.8 km] to the north)
  • Helena
    (28 miles [45.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Helena have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Helena
    • Helena is located in Sandusky County
    • Population from the 2020 Census: 208 people
    • Jump to TripAdvisor's Tourism page for Helena <3>
  • Holgate
    (24 miles [38.6 km] to the northwest)
  • Jenera
    (12 miles [19.3 km] to the south)
  • Kalida
    (25 miles [40.2 km] to the west)
    • Note: The GPS coordinates that we are using for Kalida have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kalida
    • Kalida is located in Putnam County
    • Population from the 2020 Census: 1,583 people
    • Jump to TripAdvisor's Tourism page for Kalida <3>
  • Kenton
    (30 miles [48.3 km] to the south)
  • Kirby
    (24 miles [38.6 km] to the southeast)
    • Note: The GPS coordinates that we are using for Kirby have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kirby
    • Kirby is located in Wyandot County
    • Population from the 2020 Census: 112 people
    • Jump to TripAdvisor's Tourism page for Kirby <3>
  • Lafayette
    (25 miles [40.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Lafayette have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lafayette
    • Lafayette is located in Allen County
    • Population from the 2020 Census: 418 people
    • Jump to TripAdvisor's Tourism page for Lafayette <3>
  • Leipsic
    (13 miles [20.9 km] to the west)
  • Liberty Center
    (28 miles [45.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Liberty Center have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Liberty Center
    • Liberty Center is located in Henry County
    • Population from the 2020 Census: 1,123 people
    • Jump to TripAdvisor's Tourism page for Liberty Center <3>
  • Lima
    (30 miles [48.3 km] to the southwest)
    • Jump to our Gazetteer entry for Lima
    • Lima is located in Allen County
    • Population from the 2020 Census: 36,440 people
    • Jump to TripAdvisor's Tourism page for Lima <3>
  • Luckey
    (28 miles [45.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Luckey have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Luckey
    • Luckey is located in Wood County
    • Population from the 2020 Census: 1,049 people
    • Jump to TripAdvisor's Tourism page for Luckey <3>
  • Malinta
    (22 miles [35.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Malinta have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Malinta
    • Malinta is located in Henry County
    • Population from the 2020 Census: 252 people
    • Jump to TripAdvisor's Tourism page for Malinta <3>
  • McClure
    (22 miles [35.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for McClure have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McClure
    • McClure is located in Henry County
    • Population from the 2020 Census: 678 people
    • Jump to TripAdvisor's Tourism page for McClure <3>
  • McComb
    (3 miles [4.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for McComb have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McComb
    • McComb is located in Hancock County
    • Population from the 2020 Census: 1,632 people
    • Jump to TripAdvisor's Tourism page for McComb <3>
  • McCutchenville
    (25 miles [40.2 km] to the east)
  • Miller City
    (21 miles [33.8 km] to the west)
    • Note: The GPS coordinates that we are using for Miller City have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Miller City
    • Miller City is located in Putnam County
    • Population from the 2020 Census: 138 people
    • Jump to TripAdvisor's Tourism page for Miller City <3>
  • Mount Blanchard
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Mount Blanchard have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Blanchard
    • Mount Blanchard is located in Hancock County
    • Population from the 2020 Census: 478 people
    • Jump to TripAdvisor's Tourism page for Mount Blanchard <3>
  • Napoleon
    (29 miles [46.7 km] to the northwest)
  • Neapolis
    (29 miles [46.7 km] to the north)
    • Note: The GPS coordinates that we are using for Neapolis have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Neapolis
    • Neapolis is located in Holmes County
    • Jump to TripAdvisor's Tourism page for Neapolis <3>
  • New Riegel
    (21 miles [33.8 km] to the east)
  • North Baltimore
    (7 miles [11.3 km] to the north)
  • Ottawa
    (17 miles [27.4 km] to the west)
  • Pemberville
    (26 miles [41.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Pemberville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pemberville
    • Pemberville is located in Wood County
    • Population from the 2020 Census: 1,422 people
    • Jump to TripAdvisor's Tourism page for Pemberville <3>
  • Rawson
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Rawson have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rawson
    • Rawson is located in Hancock County
    • Population from the 2020 Census: 552 people
    • Jump to TripAdvisor's Tourism page for Rawson <3>
  • Tiffin
    (28 miles [45.1 km] to the east)
  • Tontogany
    (23 miles [37 km] to the north)
    • Note: The GPS coordinates that we are using for Tontogany have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tontogany
    • Tontogany is located in Wood County
    • Population from the 2020 Census: 383 people
    • Jump to TripAdvisor's Tourism page for Tontogany <3>
  • Van Buren
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Van Buren
    • Van Buren is located in Hancock County
    • Population from the 2020 Census: 538 people
    • Jump to TripAdvisor's Tourism page for Van Buren <3>
  • Waterville
    (28 miles [45.1 km] to the north)
  • Wayne
    (20 miles [32.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Wayne have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wayne
    • Wayne is located in Wood County
    • Population from the 2020 Census: 925 people
    • Jump to TripAdvisor's Tourism page for Wayne <3>
  • Weston
    (18 miles [29 km] to the north)
    • Note: The GPS coordinates that we are using for Weston have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Weston
    • Weston is located in Wood County
    • Population from the 2020 Census: 1,657 people
    • Jump to TripAdvisor's Tourism page for Weston <3>
  • Whitehouse
    (30 miles [48.3 km] to the north)
    • Note: The GPS coordinates that we are using for Whitehouse have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Whitehouse
    • Whitehouse is located in Lucas County
    • Population from the 2020 Census: 4,932 people
    • Jump to TripAdvisor's Tourism page for Whitehouse <3>

Unfortunately, we don't know of an official website for Murphys. If you can help, please contact us through our Feedback Page.

The official website for Hancock County: www.co.hancock.oh.us/

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Murphys) to Point B.Our distance measurements begin at a specific point in Murphys. The point we use is located at these GPS coordinates - Latitude: 41.0834, Longitude: -83.7269       In this case, the coordinates for Murphys have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024