RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Coshocton County >> Conesville >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Ohio

The Commemorative Quarter for Ohio





TripAdvisor Links

Introduction ...

When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

While we are unaware of a TripAdvisor Tourism page that is specific to Conesville, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Conesville - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 54 communities listed:

  • Adamsville
    (8 miles [12.9 km] to the south)
  • Baltic
    (20 miles [32.2 km] to the northeast)
  • Berlin
    (26 miles [41.8 km] to the north)
  • Bladensburg
    (21 miles [33.8 km] to the west)
  • Blue Rock
    (26 miles [41.8 km] to the south)
  • Brownsville
    (25 miles [40.2 km] to the southwest)
  • Buffalo
    (26 miles [41.8 km] to the southeast)
  • Byesville
    (23 miles [37 km] to the southeast)
    • Note: The GPS coordinates that we are using for Byesville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Byesville
    • Byesville is located in Guernsey County
    • Population from the 2020 Census: 2,345 people
    • Jump to TripAdvisor's Tourism page for Byesville <2>
  • Cambridge
    (19 miles [30.6 km] to the southeast)
  • Chandlersville
    (20 miles [32.2 km] to the south)
    • Note: The GPS coordinates that we are using for Chandlersville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chandlersville
    • Chandlersville is located in Muskingum County
    • Jump to TripAdvisor's Tourism page for Chandlersville <2>
  • Charm
    (22 miles [35.4 km] to the north)
  • Coshocton
    (6 miles [9.7 km] to the north)
  • Crooksville
    (30 miles [48.3 km] to the south)
    • Note: The GPS coordinates that we are using for Crooksville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crooksville
    • Crooksville is located in Perry County
    • Population from the 2020 Census: 2,476 people
    • Jump to TripAdvisor's Tourism page for Crooksville <2>
  • Cumberland
    (26 miles [41.8 km] to the southeast)
  • Danville
    (26 miles [41.8 km] to the northwest)
  • Dresden
    (7 miles [11.3 km] to the southwest)
  • Duncan Falls
    (21 miles [33.8 km] to the south)
    • Note: The GPS coordinates that we are using for Duncan Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Duncan Falls
    • Duncan Falls is located in Muskingum County
    • Jump to TripAdvisor's Tourism page for Duncan Falls <2>
  • Frazeysburg
    (12 miles [19.3 km] to the west)
    • Note: The GPS coordinates that we are using for Frazeysburg have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Frazeysburg
    • Frazeysburg is located in Muskingum County
    • Population from the 2020 Census: 1,315 people
    • Jump to TripAdvisor's Tourism page for Frazeysburg <2>
  • Gambier
    (29 miles [46.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Gambier have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gambier
    • Gambier is located in Knox County
    • Population from the 2020 Census: 2,502 people
    • Jump to TripAdvisor's Tourism page for Gambier <2>
  • Glenford
    (30 miles [48.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Glenford have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Glenford
    • Glenford is located in Perry County
    • Population from the 2020 Census: 169 people
    • Jump to TripAdvisor's Tourism page for Glenford <2>
  • Glenmont
    (25 miles [40.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Glenmont have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Glenmont
    • Glenmont is located in Holmes County
    • Population from the 2020 Census: 298 people
    • Jump to TripAdvisor's Tourism page for Glenmont <2>
  • Gnadenhutten
    (27 miles [43.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Gnadenhutten have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gnadenhutten
    • Gnadenhutten is located in Tuscarawas County
    • Population from the 2020 Census: 1,251 people
    • Jump to TripAdvisor's Tourism page for Gnadenhutten <2>
  • Heath
    (30 miles [48.3 km] to the west)
    • Note: The GPS coordinates that we are using for Heath have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Heath
    • Heath is located in Licking County
    • Population from the 2020 Census: 11,035 people
    • Jump to TripAdvisor's Tourism page for Heath <2>
  • Holmesville
    (30 miles [48.3 km] to the north)
  • Howard
    (27 miles [43.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Howard have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Howard
    • Howard is located in Knox County
    • Jump to TripAdvisor's Tourism page for Howard <2>
  • Killbuck
    (22 miles [35.4 km] to the north)
    • Note: The GPS coordinates that we are using for Killbuck have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Killbuck
    • Killbuck is located in Holmes County
    • Population from the 2020 Census: 921 people
    • Jump to TripAdvisor's Tourism page for Killbuck <2>
  • Kimbolton
    (17 miles [27.4 km] to the east)
    • Note: The GPS coordinates that we are using for Kimbolton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kimbolton
    • Kimbolton is located in Guernsey County
    • Jump to TripAdvisor's Tourism page for Kimbolton <2>
  • Lore City
    (26 miles [41.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Lore City have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lore City
    • Lore City is located in Guernsey County
    • Population from the 2020 Census: 309 people
    • Jump to TripAdvisor's Tourism page for Lore City <2>
  • Martinsburg
    (25 miles [40.2 km] to the west)
    • Note: The GPS coordinates that we are using for Martinsburg have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Martinsburg
    • Martinsburg is located in Knox County
    • Population from the 2020 Census: 232 people
    • Jump to TripAdvisor's Tourism page for Martinsburg <2>
  • Millersburg
    (25 miles [40.2 km] to the north)
  • Mount Hope
    (30 miles [48.3 km] to the north)
  • Nashport
    (17 miles [27.4 km] to the southwest)
  • New Bedford
    (19 miles [30.6 km] to the north)
  • New Concord
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for New Concord have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Concord
    • New Concord is located in Muskingum County
    • Population from the 2020 Census: 2,165 people
    • Jump to TripAdvisor's Tourism page for New Concord <2>
  • Newark
    (28 miles [45.1 km] to the west)
  • Newcomerstown
    (16 miles [25.7 km] to the east)
  • Norwich
    (14 miles [22.5 km] to the south)
  • Old Washington
    (25 miles [40.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Old Washington have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Old Washington
    • Old Washington is located in Guernsey County
    • Population from the 2020 Census: 267 people
    • Jump to TripAdvisor's Tourism page for Old Washington <2>
  • Philo
    (22 miles [35.4 km] to the south)
    • Note: The GPS coordinates that we are using for Philo have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Philo
    • Philo is located in Muskingum County
    • Population from the 2020 Census: 728 people
    • Jump to TripAdvisor's Tourism page for Philo <2>
  • Plainfield
    (9 miles [14.5 km] to the east)
    • Note: The GPS coordinates that we are using for Plainfield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Plainfield
    • Plainfield is located in Coshocton County
    • Population from the 2020 Census: 159 people
    • Jump to TripAdvisor's Tourism page for Plainfield <2>
  • Pleasant City
    (26 miles [41.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Pleasant City have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pleasant City
    • Pleasant City is located in Guernsey County
    • Population from the 2020 Census: 422 people
    • Jump to TripAdvisor's Tourism page for Pleasant City <2>
  • Port Washington
    (21 miles [33.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Port Washington have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Port Washington
    • Port Washington is located in Tuscarawas County
    • Population from the 2020 Census: 564 people
    • Jump to TripAdvisor's Tourism page for Port Washington <2>
  • Roseville
    (27 miles [43.5 km] to the south)
  • Saint Louisville
    (27 miles [43.5 km] to the west)
    • Note: The GPS coordinates that we are using for Saint Louisville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Saint Louisville
    • Saint Louisville is located in Licking County
    • Population from the 2020 Census: 383 people
    • Jump to TripAdvisor's Tourism page for Saint Louisville <2>
  • Senecaville
    (28 miles [45.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Senecaville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Senecaville
    • Senecaville is located in Guernsey County
    • Population from the 2020 Census: 447 people
    • Jump to TripAdvisor's Tourism page for Senecaville <2>
  • Stone Creek
    (22 miles [35.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Stone Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stone Creek
    • Stone Creek is located in Tuscarawas County
    • Population from the 2020 Census: 170 people
    • Jump to TripAdvisor's Tourism page for Stone Creek <2>
  • Sugarcreek
    (25 miles [40.2 km] to the northeast)
  • Trinway
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Trinway have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Trinway
    • Trinway is located in Muskingum County
    • Jump to TripAdvisor's Tourism page for Trinway <2>
  • Utica
    (29 miles [46.7 km] to the west)
    • Jump to our Gazetteer entry for Utica
    • Utica is located in Licking County
    • Population from the 2020 Census: 2,280 people
    • Jump to TripAdvisor's Tourism page for Utica <2>
  • Walhonding
    (18 miles [29 km] to the northwest)
  • Walnut Creek
    (26 miles [41.8 km] to the north)
    • Note: The GPS coordinates that we are using for Walnut Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Walnut Creek
    • Walnut Creek is located in Holmes County
    • Jump to TripAdvisor's Tourism page for Walnut Creek <2>
  • Warsaw
    (11 miles [17.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Warsaw have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Warsaw
    • Warsaw is located in Coshocton County
    • Population from the 2020 Census: 690 people
    • Jump to TripAdvisor's Tourism page for Warsaw <2>
  • West Lafayette
    (9 miles [14.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for West Lafayette have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West Lafayette
    • West Lafayette is located in Coshocton County
    • Population from the 2020 Census: 2,301 people
    • Jump to TripAdvisor's Tourism page for West Lafayette <2>
  • Zanesville
    (18 miles [29 km] to the south)

Unfortunately, we don't know of an official website for Conesville. If you can help, please contact us through our Feedback Page.

The official website for Coshocton County: www.co.coshocton.oh.us/

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Conesville) to Point B.Our distance measurements begin at a specific point in Conesville. The point we use is located at these GPS coordinates - Latitude: 40.1851, Longitude: -81.8918       In this case, the coordinates for Conesville have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024