TripAdvisor Links
Introduction ...
When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
While we are unaware of a TripAdvisor Tourism page that is specific to Garrison, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Garrison - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 43 communities listed:
- Abie
(15 miles [24.1 km] to the northeast)
- Beaver Crossing
(28 miles [45.1 km] to the south)
- Bee
(12 miles [19.3 km] to the southeast)
- Bellwood
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Bellwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bellwood
- Bellwood is located in Butler County
- Population from the 2020 Census: 416 people
- Jump to TripAdvisor's Tourism page for Bellwood <2>
- Benedict
(25 miles [40.2 km] to the southwest)
- Brainard
(8 miles [12.9 km] to the east)
- Bruno
(12 miles [19.3 km] to the northeast)
- Ceresco
(28 miles [45.1 km] to the east)
- Colon
(30 miles [48.3 km] to the east)
- Columbus
(20 miles [32.2 km] to the northwest)
- Davey
(28 miles [45.1 km] to the southeast)
- David City
(5 miles [8 km] to the north)
- Duncan
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Duncan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Duncan
- Duncan is located in Platte County
- Population from the 2020 Census: 370 people
- Jump to TripAdvisor's Tourism page for Duncan <2>
- Dwight
(9 miles [14.5 km] to the southeast)
- Garland
(18 miles [29 km] to the southeast)
- Goehner
(23 miles [37 km] to the south)
- Gresham
(15 miles [24.1 km] to the southwest)
- Linwood
(20 miles [32.2 km] to the northeast)
- Malcolm
(24 miles [38.6 km] to the southeast)
- Malmo
(23 miles [37 km] to the east)
- Milford
(28 miles [45.1 km] to the south)
- Monroe
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monroe
- Monroe is located in Platte County
- Population from the 2020 Census: 273 people
- Jump to TripAdvisor's Tourism page for Monroe <2>
- Morse Bluff
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Morse Bluff have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morse Bluff
- Morse Bluff is located in Saunders County
- Population from the 2020 Census: 144 people
- Jump to TripAdvisor's Tourism page for Morse Bluff <2>
- North Bend
(28 miles [45.1 km] to the northeast)
- Osceola
(19 miles [30.6 km] to the west)
- Platte Center
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Platte Center have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Platte Center
- Platte Center is located in Platte County
- Population from the 2020 Census: 329 people
- Jump to TripAdvisor's Tourism page for Platte Center <2>
- Pleasant Dale
(29 miles [46.7 km] to the southeast)
- Prague
(20 miles [32.2 km] to the northeast)
- Raymond
(24 miles [38.6 km] to the southeast)
- Rising City
(7 miles [11.3 km] to the west)
- Schuyler
(19 miles [30.6 km] to the north)
- Seward
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Seward have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seward
- Seward is located in Seward County
- Population from the 2020 Census: 7,363 people
- Jump to TripAdvisor's Tourism page for Seward <2>
- Shelby
(13 miles [20.9 km] to the west)
- Silver Creek
(27 miles [43.5 km] to the west)
- Staplehurst
(13 miles [20.9 km] to the south)
- Stromsburg
(22 miles [35.4 km] to the west)
- Ulysses
(7 miles [11.3 km] to the south)
- Utica
(21 miles [33.8 km] to the southwest)
- Valparaiso
(18 miles [29 km] to the east)
- Waco
(24 miles [38.6 km] to the southwest)
- Wahoo
(28 miles [45.1 km] to the east)
- Weston
(22 miles [35.4 km] to the east)
- York
(30 miles [48.3 km] to the southwest)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Garrison. If you can help, please contact us through our Feedback Page.
The official website for Butler County: www.co.butler.ne.us/
The official website for State of Nebraska: www.nebraska.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Garrison) to Point B.Our distance measurements begin at a specific point in Garrison. The point we use is located at these GPS coordinates - Latitude: 41.1755, Longitude: -97.1642 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |