RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Dakota >> Ramsey County >> Grand Harbor >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
North Dakota


The Commemorative Quarter for North Dakota







TripAdvisor Links

Introduction ...

When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

While we are unaware of a TripAdvisor Tourism page that is specific to Grand Harbor, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Grand Harbor - within 30 miles [48.3 km]<1>.

Unless noted otherwise, the following communities are located in Ramsey County.

Our list sorts the communities in alphabetical order. There are 23 communities listed:

  • Brinsmade
    (15 miles [24.1 km] to the west)
    • Note: The GPS coordinates that we are using for Brinsmade have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brinsmade
    • Brinsmade is located in Benson County
    • Population from the 2020 Census: 34 people
    • Jump to TripAdvisor's Tourism page for Brinsmade <3>
  • Brocket
    (29 miles [46.7 km] to the east)
    • Note: The GPS coordinates that we are using for Brocket have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brocket
    • Brocket is located in Ramsey County
    • Population from the 2020 Census: 53 people
    • Jump to TripAdvisor's Tourism page for Brocket <3>
  • Cando
    (24 miles [38.6 km] to the northwest)
    • Note: The GPS coordinates that we are using for Cando have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cando
    • Cando is located in Towner County
    • Population from the 2020 Census: 1,008 people
    • Jump to TripAdvisor's Tourism page for Cando <3>
  • Churchs Ferry
    (11 miles [17.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Churchs Ferry have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Churchs Ferry
    • Churchs Ferry is located in Ramsey County
    • Population from the 2020 Census: 12 people
    • Jump to TripAdvisor's Tourism page for Churchs Ferry <3>
  • Crary
    (17 miles [27.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Crary have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crary
    • Crary is located in Ramsey County
    • Population from the 2020 Census: 147 people
    • Jump to TripAdvisor's Tourism page for Crary <3>
  • Devils Lake
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Devils Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Devils Lake
    • Devils Lake is located in Ramsey County
    • Population from the 2020 Census: 7,229 people
    • Jump to TripAdvisor's Tourism page for Devils Lake <3>
  • Edmore
    (29 miles [46.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Edmore have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Edmore
    • Edmore is located in Ramsey County
    • Population from the 2020 Census: 175 people
    • Jump to TripAdvisor's Tourism page for Edmore <3>
  • Fort Totten
    (13 miles [20.9 km] to the south)
  • Hampden
    (29 miles [46.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Hampden have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hampden
    • Hampden is located in Ramsey County
    • Population from the 2020 Census: 45 people
    • Jump to TripAdvisor's Tourism page for Hampden <3>
  • Lakota
    (30 miles [48.3 km] to the east)
  • Lawton
    (29 miles [46.7 km] to the east)
    • Note: The GPS coordinates that we are using for Lawton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lawton
    • Lawton is located in Ramsey County
    • Population from the 2020 Census: 31 people
    • Jump to TripAdvisor's Tourism page for Lawton <3>
  • Leeds
    (22 miles [35.4 km] to the west)
  • Maddock
    (28 miles [45.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Maddock have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maddock
    • Maddock is located in Benson County
    • Population from the 2020 Census: 375 people
    • Jump to TripAdvisor's Tourism page for Maddock <3>
  • Minnewaukan
    (14 miles [22.5 km] to the southwest)
  • Oberon
    (19 miles [30.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Oberon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oberon
    • Oberon is located in Benson County
    • Population from the 2020 Census: 101 people
    • Jump to TripAdvisor's Tourism page for Oberon <3>
  • Penn
    (6 miles [9.7 km] to the northwest)
  • Saint Michael
    (13 miles [20.9 km] to the southeast)
  • Sheyenne
    (24 miles [38.6 km] to the south)
  • Starkweather
    (20 miles [32.2 km] to the north)
  • Tokio
    (18 miles [29 km] to the southeast)
  • Warwick
    (25 miles [40.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Warwick have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Warwick
    • Warwick is located in Benson County
    • Population from the 2020 Census: 63 people
    • Jump to TripAdvisor's Tourism page for Warwick <3>
  • Webster
    (9 miles [14.5 km] to the northeast)
  • York
    (28 miles [45.1 km] to the west)

Unfortunately, we don't know of an official website for Grand Harbor. If you can help, please contact us through our Feedback Page.

The official website for State of North Dakota: www.nd.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Grand Harbor) to Point B.Our distance measurements begin at a specific point in Grand Harbor. The point we use is located at these GPS coordinates - Latitude: 48.1697, Longitude: -98.9843       In this case, the coordinates for Grand Harbor have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 10 Mar 2024