RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Wilkes County >> Wilbar >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Wilbar (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Wilbar. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Wilbar is located in Wilkes County.

To see how the shape of North Carolina's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Wilkes County: Alexander, Alleghany, Ashe, Caldwell, Iredell, Surry, Watauga & Yadkin.

Below are the counties that are near Wilbar. For each of these counties, we show a sample of those communities that are closest to Wilbar:

  • Wilkes County     (The home county of Wilbar)
    • The following are listed by their distance from Wilbar, with the one closest to Wilbar listed first.
    • Purlear
      (4 miles [6.4 km] to the south)
      • Note: The GPS coordinates that we are using for Purlear have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Purlear
      • Purlear is located in Wilkes County
    • Millers Creek
      (5 miles [8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Millers Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Millers Creek
      • Millers Creek is located in Wilkes County
      • Jump to TripAdvisor's Tourism page for Millers Creek <2>
    • Mulberry
      (6 miles [9.7 km] to the east)
      • Jump to our Gazetteer entry for Mulberry
      • Mulberry is located in Wilkes County
    • Mount Pleasant
      (6 miles [9.7 km] to the south)
      • Note: The GPS coordinates that we are using for Mount Pleasant have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Pleasant
      • Mount Pleasant is located in Wilkes County
    • McGrady
      (7 miles [11.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for McGrady have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McGrady
      • McGrady is located in Wilkes County
    • Cricket
      (7 miles [11.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cricket have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cricket
      • Cricket is located in Wilkes County
    • Fairplains
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Fairplains have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairplains
      • Fairplains is located in Wilkes County
    • Stokes ‑ Historic
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Stokes have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stokes
      • Stokes is located in Wilkes County
    • Dehart
      (9 miles [14.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Dehart have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dehart
      • Dehart is located in Wilkes County
    • Springfield ‑ Historic
      (9 miles [14.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Springfield
      • Springfield is located in Wilkes County
    • Wilkesboro
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Wilkesboro have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wilkesboro
      • Wilkesboro is located in Wilkes County
      • Population from the 2020 Census: 3,430 people
      • Jump to TripAdvisor's Tourism page for Wilkesboro <2>
    • Hays
      (10 miles [16.1 km] to the east)
      • Note: The GPS coordinates that we are using for Hays have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hays
      • Hays is located in Wilkes County
      • Jump to TripAdvisor's Tourism page for Hays <2>
  • Alexander County
    • The following are listed by their distance from Wilbar, with the one closest to Wilbar listed first.
    • Vashti
      (20 miles [32.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Vashti have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vashti
      • Vashti is located in Alexander County
    • Ellendale
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Ellendale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ellendale
      • Ellendale is located in Alexander County
    • Taylorsville
      (23 miles [37 km] to the south)
    • Rocky Springs
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Rocky Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rocky Springs
      • Rocky Springs is located in Alexander County
    • Liledoun
      (24 miles [38.6 km] to the south)
      • Note: The GPS coordinates that we are using for Liledoun have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Liledoun
      • Liledoun is located in Alexander County
    • Little River
      (24 miles [38.6 km] to the south)
      • Note: The GPS coordinates that we are using for Little River have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Little River
      • Little River is located in Alexander County
    • Midway
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Midway have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Midway
      • Midway is located in Alexander County
    • Fairview Park
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Fairview Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairview Park
      • Fairview Park is located in Alexander County
    • Isenhour Park
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Isenhour Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Isenhour Park
      • Isenhour Park is located in Alexander County
    • Hiddenite
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Hiddenite have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hiddenite
      • Hiddenite is located in Alexander County
      • Jump to TripAdvisor's Tourism page for Hiddenite <2>
    • Millersville
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Millersville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Millersville
      • Millersville is located in Alexander County
    • Bethlehem
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Bethlehem have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bethlehem
      • Bethlehem is located in Alexander County
  • Alleghany County
    • The following are listed by their distance from Wilbar, with the one closest to Wilbar listed first.
    • Laurel Springs
      (11 miles [17.7 km] to the north)
      • Note: The GPS coordinates that we are using for Laurel Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Laurel Springs
      • Laurel Springs is located in Alleghany County
      • Jump to TripAdvisor's Tourism page for Laurel Springs <2>
    • Scottville
      (16 miles [25.7 km] to the north)
      • Note: The GPS coordinates that we are using for Scottville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Scottville
      • Scottville is located in Alleghany County
      • Jump to TripAdvisor's Tourism page for Scottville <2>
    • Topia
      (18 miles [29 km] to the north)
      • Jump to our Gazetteer entry for Topia
      • Topia is located in Alleghany County
    • Glade Valley
      (20 miles [32.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Glade Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Glade Valley
      • Glade Valley is located in Alleghany County
      • Jump to TripAdvisor's Tourism page for Glade Valley <2>
    • Roaring Gap
      (20 miles [32.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Roaring Gap have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Roaring Gap
      • Roaring Gap is located in Alleghany County
      • Jump to TripAdvisor's Tourism page for Roaring Gap <2>
    • Sparta
      (20 miles [32.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Sparta have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sparta
      • Sparta is located in Alleghany County
      • Population from the 2020 Census: 1,723 people
      • Jump to TripAdvisor's Tourism page for Sparta <2>
    • Amelia
      (21 miles [33.8 km] to the north)
      • Jump to our Gazetteer entry for Amelia
      • Amelia is located in Alleghany County
    • Piney Creek
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for Piney Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Piney Creek
      • Piney Creek is located in Alleghany County
      • Jump to TripAdvisor's Tourism page for Piney Creek <2>
    • Hooker
      (23 miles [37 km] to the northeast)
      • Jump to our Gazetteer entry for Hooker
      • Hooker is located in Alleghany County
    • Ennice
      (27 miles [43.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Ennice have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ennice
      • Ennice is located in Alleghany County
      • Jump to TripAdvisor's Tourism page for Ennice <2>
  • Ashe County
    • The following are listed by their distance from Wilbar, with the one closest to Wilbar listed first.
    • Glendale Springs
      (8 miles [12.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Glendale Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Glendale Springs
      • Glendale Springs is located in Ashe County
      • Jump to TripAdvisor's Tourism page for Glendale Springs <2>
    • Yates
      (9 miles [14.5 km] to the west)
      • Jump to our Gazetteer entry for Yates
      • Yates is located in Ashe County
    • Transou
      (11 miles [17.7 km] to the north)
      • Note: The GPS coordinates that we are using for Transou have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Transou
      • Transou is located in Ashe County
    • Wagoner
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Wagoner have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wagoner
      • Wagoner is located in Ashe County
    • Fleetwood
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for Fleetwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fleetwood
      • Fleetwood is located in Ashe County
      • Jump to TripAdvisor's Tourism page for Fleetwood <2>
    • West Jefferson
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for West Jefferson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Jefferson
      • West Jefferson is located in Ashe County
      • Population from the 2020 Census: 1,313 people
      • Jump to TripAdvisor's Tourism page for West Jefferson <2>
    • Brownwood
      (14 miles [22.5 km] to the west)
      • Jump to our Gazetteer entry for Brownwood
      • Brownwood is located in Ashe County
    • Jefferson
      (15 miles [24.1 km] to the northwest)
    • Todd
      (17 miles [27.4 km] to the west)
      • Note: The GPS coordinates that we are using for Todd have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Todd
      • Todd is located in Ashe County
      • Jump to TripAdvisor's Tourism page for Todd <2>
    • Crumpler
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for Crumpler have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Crumpler
      • Crumpler is located in Ashe County
      • Jump to TripAdvisor's Tourism page for Crumpler <2>
    • Warrensville
      (19 miles [30.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Warrensville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Warrensville
      • Warrensville is located in Ashe County
      • Jump to TripAdvisor's Tourism page for Warrensville <2>
    • Comet
      (21 miles [33.8 km] to the northwest)
      • Jump to our Gazetteer entry for Comet
      • Comet is located in Ashe County
  • Avery County
    • Seven Devils
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Seven Devils have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Seven Devils
      • Seven Devils is located in Avery County
      • Population from the 2020 Census: 203 people
      • Jump to TripAdvisor's Tourism page for Seven Devils <2>
  • Caldwell County
    • The following are listed by their distance from Wilbar, with the one closest to Wilbar listed first.
    • Kings Creek
      (18 miles [29 km] to the south)
      • Jump to our Gazetteer entry for Kings Creek
      • Kings Creek is located in Caldwell County
    • Draco
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Draco have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Draco
      • Draco is located in Caldwell County
    • Cedar Rock
      (22 miles [35.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Cedar Rock have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cedar Rock
      • Cedar Rock is located in Caldwell County
      • Population from the 2020 Census: 299 people
      • Cedar Rock has also been known as:
      • Cedar Rock village
    • Patterson
      (22 miles [35.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Patterson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Patterson
      • Patterson is located in Caldwell County
    • Blowing Rock
      (22 miles [35.4 km] to the west)
    • Mulberry
      (24 miles [38.6 km] to the southwest)
      • Jump to our Gazetteer entry for Mulberry
      • Mulberry is located in Caldwell County
    • Rufus
      (25 miles [40.2 km] to the southwest)
      • Jump to our Gazetteer entry for Rufus
      • Rufus is located in Caldwell County
    • Lenoir
      (26 miles [41.8 km] to the southwest)
      • Jump to our Gazetteer entry for Lenoir
      • Lenoir is located in Caldwell County
      • Population from the 2020 Census: 17,911 people
      • Former name for Lenoir:
      • Tucker's Barn
      • Jump to TripAdvisor's Tourism page for Lenoir <2>
    • Abingdon
      (28 miles [45.1 km] to the southwest)
      • Jump to our Gazetteer entry for Abingdon
      • Abingdon is located in Caldwell County
    • Hudson
      (29 miles [46.7 km] to the south)
      • Jump to our Gazetteer entry for Hudson
      • Hudson is located in Caldwell County
      • Population from the 2020 Census: 3,703 people
      • Former name for Hudson:
      • Hudsonville
      • Jump to TripAdvisor's Tourism page for Hudson <2>
    • Cajah's Mountain
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Cajah's Mountain have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cajah's Mountain
      • Cajah's Mountain is located in Caldwell County
      • Population from the 2020 Census: 2,728 people
    • Collettsville
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Collettsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Collettsville
      • Collettsville is located in Caldwell County
      • Jump to TripAdvisor's Tourism page for Collettsville <2>
  • Iredell County
    • The following are listed by their distance from Wilbar, with the one closest to Wilbar listed first.
    • Love Valley
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Love Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Love Valley
      • Love Valley is located in Iredell County
      • Population from the 2020 Census: 115 people
      • Jump to TripAdvisor's Tourism page for Love Valley <2>
    • Union Grove
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Union Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Union Grove
      • Union Grove is located in Iredell County
      • Jump to TripAdvisor's Tourism page for Union Grove <2>
    • Brevard ‑ Historic
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Brevard have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Brevard
      • Brevard is located in Iredell County
  • Surry County
    • The following are listed by their distance from Wilbar, with the one closest to Wilbar listed first.
    • Thurmond
      (22 miles [35.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Thurmond have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Thurmond
      • Thurmond is located in Surry County
      • Jump to TripAdvisor's Tourism page for Thurmond <2>
    • State Road
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for State Road have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for State Road
      • State Road is located in Surry County
      • Jump to TripAdvisor's Tourism page for State Road <2>
    • Devotion
      (24 miles [38.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Devotion have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Devotion
      • Devotion is located in Surry County
    • Elkin
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Elkin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elkin
      • Elkin is located in Surry County
      • Population from the 2020 Census: 4,001 people
      • Jump to TripAdvisor's Tourism page for Elkin <2>
    • Mulberry
      (28 miles [45.1 km] to the east)
      • Jump to our Gazetteer entry for Mulberry
      • Mulberry is located in Surry County
    • Zephyr
      (28 miles [45.1 km] to the east)
      • Jump to our Gazetteer entry for Zephyr
      • Zephyr is located in Surry County
    • Low Gap
      (30 miles [48.3 km] to the northeast)
  • Watauga County
    • The following are listed by their distance from Wilbar, with the one closest to Wilbar listed first.
    • Stony Fork
      (10 miles [16.1 km] to the west)
      • Jump to our Gazetteer entry for Stony Fork
      • Stony Fork is located in Watauga County
    • Deep Gap
      (13 miles [20.9 km] to the west)
    • Laxon
      (13 miles [20.9 km] to the west)
      • Jump to our Gazetteer entry for Laxon
      • Laxon is located in Watauga County
    • Rutherwood
      (16 miles [25.7 km] to the west)
      • Jump to our Gazetteer entry for Rutherwood
      • Rutherwood is located in Watauga County
    • Bamboo
      (17 miles [27.4 km] to the west)
      • Jump to our Gazetteer entry for Bamboo
      • Bamboo is located in Watauga County
    • Moretz
      (18 miles [29 km] to the west)
      • Note: The GPS coordinates that we are using for Moretz have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Moretz
      • Moretz is located in Watauga County
    • Sands
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Sands have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sands
      • Sands is located in Watauga County
    • Boone
      (20 miles [32.2 km] to the west)
      • Note: The GPS coordinates that we are using for Boone have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Boone
      • Boone is located in Watauga County
      • Population from the 2020 Census: 20,003 people
      • Jump to TripAdvisor's Tourism page for Boone <2>
    • Shulls Mill
      (25 miles [40.2 km] to the west)
      • Jump to our Gazetteer entry for Shulls Mill
      • Shulls Mill is located in Watauga County
    • Zionville
      (25 miles [40.2 km] to the west)
    • Foscoe
      (26 miles [41.8 km] to the west)
    • Mabel
      (26 miles [41.8 km] to the west)
      • Jump to our Gazetteer entry for Mabel
      • Mabel is located in Watauga County
  • Yadkin County
    • The following are listed by their distance from Wilbar, with the one closest to Wilbar listed first.
    • Swan Creek
      (24 miles [38.6 km] to the east)
      • Jump to our Gazetteer entry for Swan Creek
      • Swan Creek is located in Yadkin County
    • Jonesville
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Jonesville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jonesville
      • Jonesville is located in Yadkin County
      • Population from the 2020 Census: 2,206 people
      • Jump to TripAdvisor's Tourism page for Jonesville <2>
    • Arlington
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Arlington have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Arlington
      • Arlington is located in Yadkin County
    • Cycle
      (26 miles [41.8 km] to the east)
      • Jump to our Gazetteer entry for Cycle
      • Cycle is located in Yadkin County
    • Marler
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Marler have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Marler
      • Marler is located in Yadkin County
    • Windsors Crossroads
      (28 miles [45.1 km] to the southeast)
      • Jump to our Gazetteer entry for Windsors Crossroads
      • Windsors Crossroads is located in Yadkin County
  • Johnson County (TN)
    • The following are listed by their distance from Wilbar, with the one closest to Wilbar listed first.
    • Trade
      (25 miles [40.2 km] to the west)
      • Jump to our Gazetteer entry for Trade
      • Trade is located in Johnson County (TN)
      • Estimated population in 2014: 1,441 people
      • Jump to TripAdvisor's Tourism page for Trade <2>
    • Dowell ‑ Historic
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Dowell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dowell
      • Dowell is located in Johnson County (TN)
      • Estimated population in 2014: 364 people
  • Grayson County (VA)
    • The following are listed by their distance from Wilbar, with the one closest to Wilbar listed first.
    • Mouth-of-Wilson
      (23 miles [37 km] to the north)
    • Bridle Creek
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for Bridle Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bridle Creek
      • Bridle Creek is located in Grayson County (VA)
    • Rugby
      (26 miles [41.8 km] to the north)
      • Jump to our Gazetteer entry for Rugby
      • Rugby is located in Grayson County (VA)
    • Independence
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Independence have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Independence
      • Independence is located in Grayson County (VA)
      • Population from the 2020 Census: 887 people
      • Jump to TripAdvisor's Tourism page for Independence <2>
    • Baywood
      (29 miles [46.7 km] to the northeast)
      • Jump to our Gazetteer entry for Baywood
      • Baywood is located in Grayson County (VA)
    • Whitetop
      (30 miles [48.3 km] to the northwest)

For an expanded list of the communities that are closest to Wilbar, see our County-by-County Page for Wilbar.

Newspapers Published in Wilbar ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 29 newspapers that have been published in the area around Wilbar.

Although we're unaware of any newspapers that were published in the immediate area of Wilbar, there are papers which were published within 15 miles [24.1 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Wilbar.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Wilbar:

Cemeteries Near Wilbar ...

Below are cemeteries that are in the vicinity of Wilbar.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Wilbar covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Wilbar, with the one closest to Wilbar listed first.

  • Burke Cemetery
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Burke Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Burke Cemetery
  • Taylor Cemetery
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Taylor Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Taylor Cemetery
  • Roberts Cemetery
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Roberts Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Roberts Cemetery
  • Union Tarheel Cemetery
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Union Tarheel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Union Tarheel Cemetery
  • Mountlawn Memorial Park
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for the Mountlawn Memorial Park have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mountlawn Memorial Park
  • Stony Fork Baptist Church Cemetery
    (10 miles [16.1 km] to the west)
  • St. Pauls Cemetery
    (10 miles [16.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for the St. Pauls Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Pauls Cemetery
  • Mountain Park Cemetery
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Mountain Park Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mountain Park Cemetery
  • Truitt Cemetery
    (13 miles [20.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Truitt Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Truitt Cemetery
  • Double Creek Cemetery
    (13 miles [20.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Double Creek Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Double Creek Cemetery
  • Walters - Jacobs Cemetery
    (13 miles [20.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Walters - Jacobs Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Walters - Jacobs Cemetery
  • Stamper Cemetery
    (13 miles [20.9 km] to the north)
    • Note: The GPS coordinates that we are using for the Stamper Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Stamper Cemetery
  • Continue List   (392 more) ...
    • Sherrill Hill Cemetery
      (14 miles [22.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Sherrill Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Sherrill Hill Cemetery
    • Ashelawn Memorial Gardens
      (15 miles [24.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for the Ashelawn Memorial Gardens have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Ashelawn Memorial Gardens
    • Johnson Family Cemetery
      (15 miles [24.1 km] to the northeast)
      • To give a relative sense of its location, the Johnson Family Cemetery is located 2 miles [3.2 km]<3> to the east of Traphill.
      • The Johnson Family Cemetery has also been known as:
      • Old Johnson Family Cemetery
      • Jump to our Gazetteer entry for the Johnson Family Cemetery
      • Jump to Find-A-Grave: FG ID #2188960 <4>

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that in 1895, Wilbar had a post office and no railroad service.

These communities are listed based on their distance from Wilbar, with the one closest to Wilbar listed first.

  • Parsonville
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Parsonville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Parsonville
    • Parsonville is located in Wilkes County
  • Purlear
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Purlear have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Purlear
    • Purlear is located in Wilkes County
  • Vannoy
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Vannoy have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vannoy
    • Vannoy is located in Wilkes County
  • Millers Creek
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Millers Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Millers Creek
    • Millers Creek is located in Wilkes County
    • Jump to TripAdvisor's Tourism page for Millers Creek <2>
  • Halls Mills
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Halls Mills have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Halls Mills
    • Halls Mills is located in Wilkes County
  • Maple Springs
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Maple Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maple Springs
    • Maple Springs is located in Wilkes County
  • Mulberry
    (6 miles [9.7 km] to the east)
    • Jump to our Gazetteer entry for Mulberry
    • Mulberry is located in Wilkes County
  • Obids
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Obids have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Obids
    • Obids is located in Ashe County
  • Ready Branch
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Ready Branch have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ready Branch
    • Ready Branch is located in Wilkes County
  • Cricket
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Cricket have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cricket
    • Cricket is located in Wilkes County
  • Hay Meadow ‑ Historic
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Hay Meadow have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hay Meadow
    • Hay Meadow is located in Wilkes County
  • Fairplains
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Fairplains have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairplains
    • Fairplains is located in Wilkes County
  • Continue List   (15 more) ...
    • Hendrix ‑ Historic
      (9 miles [14.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Hendrix have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hendrix
      • Hendrix is located in Wilkes County
    • Adley
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Adley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Adley
      • Adley is located in Wilkes County
    • Wilkesboro
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Wilkesboro have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wilkesboro
      • Wilkesboro is located in Wilkes County
      • Population from the 2020 Census: 3,430 people
      • Jump to TripAdvisor's Tourism page for Wilkesboro <2>

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Wilbar. See our List of 1890's Communities around Wilbar.

Unfortunately, we don't know of a website for Wilbar. If you can help, please contact us through our Feedback Page.

The official website for Wilkes County: www.wilkescounty.net/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Wilbar) to Point B.Our distance measurements begin at a specific point in Wilbar. The point we use is located at these GPS coordinates - Latitude: 36.2446, Longitude: -81.2985    
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Wilbar, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024