RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Bladen County >> Westbrook >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





TripAdvisor Links

Introduction ...

When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

While we are unaware of a TripAdvisor Tourism page that is specific to Westbrook, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Westbrook - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 22 communities listed:

  • Atkinson
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Atkinson have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Atkinson
    • Atkinson is located in Pender County
    • Population from the 2020 Census: 366 people
    • Jump to TripAdvisor's Tourism page for Atkinson <3>
  • Bladenboro
    (21 miles [33.8 km] to the west)
    • Note: The GPS coordinates that we are using for Bladenboro have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bladenboro
    • Bladenboro is located in Bladen County
    • Population from the 2020 Census: 1,697 people
    • Jump to TripAdvisor's Tourism page for Bladenboro <3>
  • Bolton
    (10 miles [16.1 km] to the south)
  • Brunswick
    (20 miles [32.2 km] to the southwest)
  • Burgaw
    (29 miles [46.7 km] to the east)
    • Note: The GPS coordinates that we are using for Burgaw have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Burgaw
    • Burgaw is located in Pender County
    • Population from the 2020 Census: 4,127 people
    • Jump to TripAdvisor's Tourism page for Burgaw <3>
  • Castle Hayne
    (30 miles [48.3 km] to the east)
    • Note: The GPS coordinates that we are using for Castle Hayne have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Castle Hayne
    • Castle Hayne is located in New Hanover County
    • Jump to TripAdvisor's Tourism page for Castle Hayne <3>
  • Chadbourn
    (25 miles [40.2 km] to the southwest)
  • Clarkton
    (13 miles [20.9 km] to the west)
    • Note: The GPS coordinates that we are using for Clarkton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clarkton
    • Clarkton is located in Bladen County
    • Population from the 2020 Census: 741 people
    • Jump to TripAdvisor's Tourism page for Clarkton <3>
  • Currie
    (18 miles [29 km] to the east)
  • Delco
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Delco have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Delco
    • Delco is located in Columbus County
    • Jump to TripAdvisor's Tourism page for Delco <3>
  • Elizabethtown
    (14 miles [22.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Elizabethtown have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elizabethtown
    • Elizabethtown is located in Bladen County
    • Population from the 2020 Census: 3,378 people
    • Jump to TripAdvisor's Tourism page for Elizabethtown <3>
  • Garland
    (21 miles [33.8 km] to the north)
  • Lake Waccamaw
    (12 miles [19.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Lake Waccamaw have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake Waccamaw
    • Lake Waccamaw is located in Columbus County
    • Population from the 2020 Census: 1,392 people
    • Jump to TripAdvisor's Tourism page for Lake Waccamaw <3>
  • Leland
    (30 miles [48.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Leland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leland
    • Leland is located in Brunswick County
    • Population from the 2020 Census: 25,647 people
    • Jump to TripAdvisor's Tourism page for Leland <3>
  • Riegelwood
    (14 miles [22.5 km] to the southeast)
  • Rocky Point
    (30 miles [48.3 km] to the east)
  • Tar Heel
    (27 miles [43.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Tar Heel have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tar Heel
    • Tar Heel is located in Bladen County
    • Population from the 2020 Census: 115 people
    • Jump to TripAdvisor's Tourism page for Tar Heel <3>
  • Wallace
    (30 miles [48.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Wallace have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wallace
    • Wallace is located in Duplin County
    • Population from the 2020 Census: 3,859 people
    • Jump to TripAdvisor's Tourism page for Wallace <3>
  • White Lake
    (12 miles [19.3 km] to the north)
    • Note: The GPS coordinates that we are using for White Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for White Lake
    • White Lake is located in Bladen County
    • Population from the 2020 Census: 742 people
    • Jump to TripAdvisor's Tourism page for White Lake <3>
  • White Oak
    (24 miles [38.6 km] to the northwest)
  • Whiteville
    (18 miles [29 km] to the southwest)
  • Winnabow
    (29 miles [46.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Winnabow have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Winnabow
    • Winnabow is located in Brunswick County
    • Jump to TripAdvisor's Tourism page for Winnabow <3>

Unfortunately, we don't know of an official website for Westbrook. If you can help, please contact us through our Feedback Page.

The official website for Bladen County: www.bladeninfo.net/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Westbrook) to Point B.Our distance measurements begin at a specific point in Westbrook. The point we use is located at these GPS coordinates - Latitude: 34.4754, Longitude: -78.4225       In this case, the coordinates for Westbrook have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024