TripAdvisor Links
Introduction ...
When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
While we are unaware of a TripAdvisor Tourism page that is specific to Red Banks, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Red Banks - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 34 communities listed:
- Bennettsville
(25 miles [40.2 km] to the west)
- Bladenboro
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Bladenboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bladenboro
- Bladenboro is located in Bladen County
- Population from the 2020 Census: 1,697 people
- Jump to TripAdvisor's Tourism page for Bladenboro <2>
- Blenheim
(26 miles [41.8 km] to the southwest)
- Clio
(18 miles [29 km] to the southwest)
- Jump to our Gazetteer entry for Clio
- Clio is located in Marlboro County (SC)
- Population from the 2020 Census: 645 people
- Jump to TripAdvisor's Tourism page for Clio <2>
- Cumberland
(26 miles [41.8 km] to the northeast)
- Dillon
(20 miles [32.2 km] to the south)
- Fairmont
(16 miles [25.7 km] to the southeast)
- Floydale
(26 miles [41.8 km] to the south)
- Fork
(28 miles [45.1 km] to the south)
- Gibson
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Gibson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gibson
- Gibson is located in Scotland County
- Population from the 2020 Census: 497 people
- Jump to TripAdvisor's Tourism page for Gibson <2>
- Hamer
(16 miles [25.7 km] to the south)
- Hamlet
(28 miles [45.1 km] to the northwest)
- Hope Mills
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Hope Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hope Mills
- Hope Mills is located in Cumberland County
- Population from the 2020 Census: 15,848 people
- Jump to TripAdvisor's Tourism page for Hope Mills <2>
- Lake View
(25 miles [40.2 km] to the south)
- Latta
(27 miles [43.5 km] to the south)
- Laurel Hill
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Laurel Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laurel Hill
- Laurel Hill is located in Scotland County
- Jump to TripAdvisor's Tourism page for Laurel Hill <2>
- Laurinburg
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Laurinburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laurinburg
- Laurinburg is located in Scotland County
- Population from the 2020 Census: 14,896 people
- Jump to TripAdvisor's Tourism page for Laurinburg <2>
- Little Rock
(17 miles [27.4 km] to the southwest)
- Lumberton
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Lumberton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <2>
- Maxton
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Maxton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maxton
- Maxton is located in Robeson County
- Population from the 2020 Census: 2,332 people
- Jump to TripAdvisor's Tourism page for Maxton <2>
- McColl
(16 miles [25.7 km] to the west)
- Minturn
(17 miles [27.4 km] to the southwest)
- Parkton
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkton
- Parkton is located in Robeson County
- Population from the 2020 Census: 430 people
- Jump to TripAdvisor's Tourism page for Parkton <2>
- Pembroke
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Robeson County
- Population from the 2020 Census: 2,942 people
- Jump to TripAdvisor's Tourism page for Pembroke <2>
- Pinebluff
(30 miles [48.3 km] to the northwest)
- Raeford
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Raeford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Raeford
- Raeford is located in Hoke County
- Population from the 2020 Census: 4,956 people
- Jump to TripAdvisor's Tourism page for Raeford <2>
- Red Springs
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Red Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Springs
- Red Springs is located in Robeson County
- Population from the 2020 Census: 3,237 people
- Jump to TripAdvisor's Tourism page for Red Springs <2>
- Rowland
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Rowland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rowland
- Rowland is located in Robeson County
- Population from the 2020 Census: 985 people
- Jump to TripAdvisor's Tourism page for Rowland <2>
- Saint Pauls
(17 miles [27.4 km] to the northeast)
- Stoney Point
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Stoney Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stoney Point
- Stoney Point is located in Cumberland County
- Jump to TripAdvisor's Tourism page for Stoney Point <2>
- Tar Heel
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Tar Heel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tar Heel
- Tar Heel is located in Bladen County
- Population from the 2020 Census: 115 people
- Jump to TripAdvisor's Tourism page for Tar Heel <2>
- Tatum
(19 miles [30.6 km] to the west)
- Wagram
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Wagram have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wagram
- Wagram is located in Scotland County
- Population from the 2020 Census: 772 people
- Jump to TripAdvisor's Tourism page for Wagram <2>
- White Oak
(30 miles [48.3 km] to the east)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Red Banks. If you can help, please contact us through our Feedback Page.
The official website for Robeson County: www.co.robeson.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Red Banks) to Point B.Our distance measurements begin at a specific point in Red Banks. The point we use is located at these GPS coordinates - Latitude: 34.7031, Longitude: -79.2508 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |