TripAdvisor Links
Introduction ...
When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
While we are unaware of a TripAdvisor Tourism page that is specific to Montague, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Montague - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 25 communities listed:
- Atkinson
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Atkinson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atkinson
- Atkinson is located in Pender County
- Population from the 2020 Census: 366 people
- Jump to TripAdvisor's Tourism page for Atkinson <3>
- Bolivia
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Bolivia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bolivia
- Bolivia is located in Brunswick County
- Population from the 2020 Census: 154 people
- Jump to TripAdvisor's Tourism page for Bolivia <3>
- Bolton
(20 miles [32.2 km] to the west)
- Burgaw
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Burgaw have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burgaw
- Burgaw is located in Pender County
- Population from the 2020 Census: 4,127 people
- Jump to TripAdvisor's Tourism page for Burgaw <3>
- Carolina Beach
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Carolina Beach have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carolina Beach
- Carolina Beach is located in New Hanover County
- Population from the 2020 Census: 6,369 people
- Jump to TripAdvisor's Tourism page for Carolina Beach <3>
- Castle Hayne
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Castle Hayne have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Castle Hayne
- Castle Hayne is located in New Hanover County
- Jump to TripAdvisor's Tourism page for Castle Hayne <3>
- Currie
(2 miles [3.2 km] to the northwest)
- Delco
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Delco have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Delco
- Delco is located in Columbus County
- Jump to TripAdvisor's Tourism page for Delco <3>
- Garland
(30 miles [48.3 km] to the northwest)
- Hampstead
(20 miles [32.2 km] to the east)
- Holly Ridge
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Holly Ridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holly Ridge
- Holly Ridge is located in Onslow County
- Population from the 2020 Census: 3,092 people
- Jump to TripAdvisor's Tourism page for Holly Ridge <3>
- Lake Waccamaw
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Lake Waccamaw have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Waccamaw
- Lake Waccamaw is located in Columbus County
- Population from the 2020 Census: 1,392 people
- Jump to TripAdvisor's Tourism page for Lake Waccamaw <3>
- Leland
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Leland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leland
- Leland is located in Brunswick County
- Population from the 2020 Census: 25,647 people
- Jump to TripAdvisor's Tourism page for Leland <3>
- Ogden
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Ogden have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ogden
- Ogden is located in New Hanover County
- Jump to TripAdvisor's Tourism page for Ogden <3>
- Riegelwood
(11 miles [17.7 km] to the southwest)
- Rocky Point
(10 miles [16.1 km] to the east)
- Rose Hill
(27 miles [43.5 km] to the north)
- Supply
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Supply have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Supply
- Supply is located in Brunswick County
- Jump to TripAdvisor's Tourism page for Supply <3>
- Surf City
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Surf City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Surf City
- Surf City is located in Onslow County
- Population from the 2020 Census: 2,532 people
- Jump to TripAdvisor's Tourism page for Surf City <3>
- Topsail Beach
(25 miles [40.2 km] to the east)
- Wallace
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Wallace have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wallace
- Wallace is located in Duplin County
- Population from the 2020 Census: 3,859 people
- Jump to TripAdvisor's Tourism page for Wallace <3>
- White Lake
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for White Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Lake
- White Lake is located in Bladen County
- Population from the 2020 Census: 742 people
- Jump to TripAdvisor's Tourism page for White Lake <3>
- Wilmington
(18 miles [29 km] to the southeast)
- Winnabow
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Winnabow have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winnabow
- Winnabow is located in Brunswick County
- Jump to TripAdvisor's Tourism page for Winnabow <3>
- Wrightsville Beach
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Wrightsville Beach have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wrightsville Beach
- Wrightsville Beach is located in New Hanover County
- Population from the 2020 Census: 2,516 people
- Jump to TripAdvisor's Tourism page for Wrightsville Beach <3>
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Montague. If you can help, please contact us through our Feedback Page.
The official website for Pender County: www.pender-county.com/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Montague) to Point B.Our distance measurements begin at a specific point in Montague. The point we use is located at these GPS coordinates - Latitude: 34.4338, Longitude: -78.0661 In this case, the coordinates for Montague have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |