RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Mecklenburg County >> Matthews >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Matthews. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Matthews.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Matthews - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 48 communities listed:

  • Belmont
    (19 miles [30.6 km] to the northwest)
  • Bowling Green
    (27 miles [43.5 km] to the west)
  • Catawba
    (21 miles [33.8 km] to the southwest)
  • Charlotte
    (9 miles [14.5 km] to the northwest)
  • Clover
    (28 miles [45.1 km] to the west)
  • Concord
    (21 miles [33.8 km] to the north)
  • Cornelius
    (26 miles [41.8 km] to the north)
    • Note: The GPS coordinates that we are using for Cornelius have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cornelius
    • Cornelius is located in Mecklenburg County
    • Population from the 2020 Census: 30,804 people
    • Jump to TripAdvisor's Tourism page for Cornelius <2>
  • Cramerton
    (21 miles [33.8 km] to the west)
    • Note: The GPS coordinates that we are using for Cramerton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cramerton
    • Cramerton is located in Gaston County
    • Population from the 2020 Census: 4,511 people
    • Jump to TripAdvisor's Tourism page for Cramerton <2>
  • Dallas
    (29 miles [46.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Dallas have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dallas
    • Dallas is located in Gaston County
    • Population from the 2020 Census: 4,851 people
    • Jump to TripAdvisor's Tourism page for Dallas <2>
  • Davidson
    (26 miles [41.8 km] to the north)
    • Note: The GPS coordinates that we are using for Davidson have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Davidson
    • Davidson is located in Mecklenburg County
    • Population from the 2020 Census: 13,203 people
    • Jump to TripAdvisor's Tourism page for Davidson <2>
  • Edgemoor
    (27 miles [43.5 km] to the southwest)
  • Fort Lawn
    (30 miles [48.3 km] to the south)
  • Fort Mill
    (14 miles [22.5 km] to the southwest)
  • Gastonia
    (28 miles [45.1 km] to the west)
  • Harrisburg
    (14 miles [22.5 km] to the north)
  • Huntersville
    (21 miles [33.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Huntersville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Huntersville
    • Huntersville is located in Mecklenburg County
    • Population from the 2020 Census: 59,095 people
    • Jump to TripAdvisor's Tourism page for Huntersville <2>
  • Indian Land
    (11 miles [17.7 km] to the southwest)
  • Indian Trail
    (4 miles [6.4 km] to the southeast)
  • Kannapolis
    (25 miles [40.2 km] to the north)
    • Note: The GPS coordinates that we are using for Kannapolis have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kannapolis
    • Kannapolis is located in Rowan County
    • Population from the 2020 Census: 52,007 people
    • Jump to TripAdvisor's Tourism page for Kannapolis <2>
  • Lake Wylie
    (18 miles [29 km] to the west)
  • Lancaster
    (27 miles [43.5 km] to the south)
  • Landis
    (30 miles [48.3 km] to the north)
    • Note: The GPS coordinates that we are using for Landis have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Landis
    • Landis is located in Rowan County
    • Population from the 2020 Census: 3,148 people
    • Jump to TripAdvisor's Tourism page for Landis <2>
  • Lando
    (28 miles [45.1 km] to the southwest)
  • Locust
    (19 miles [30.6 km] to the northeast)
    • Note: The GPS coordinates that we are using for Locust have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Locust
    • Locust is located in Stanly County
    • Population from the 2020 Census: 3,270 people
    • Jump to TripAdvisor's Tourism page for Locust <2>
  • Lowell
    (23 miles [37 km] to the northwest)
    • Note: The GPS coordinates that we are using for Lowell have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lowell
    • Lowell is located in Gaston County
    • Population from the 2020 Census: 3,744 people
    • Jump to TripAdvisor's Tourism page for Lowell <2>
  • Marshville
    (21 miles [33.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Marshville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Marshville
    • Marshville is located in Union County
    • Population from the 2020 Census: 2,835 people
    • Jump to TripAdvisor's Tourism page for Marshville <2>
  • McAdenville
    (22 miles [35.4 km] to the northwest)
  • Midland
    (14 miles [22.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Midland
    • Midland is located in Cabarrus County
    • Population from the 2020 Census: 3,880 people
    • Jump to TripAdvisor's Tourism page for Midland <2>
  • Mineral Springs
    (12 miles [19.3 km] to the south)
    • Note: The GPS coordinates that we are using for Mineral Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mineral Springs
    • Mineral Springs is located in Union County
    • Population from the 2020 Census: 3,171 people
    • Jump to TripAdvisor's Tourism page for Mineral Springs <2>
  • Mint Hill
    (5 miles [8 km] to the northeast)
  • Monroe
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Monroe
    • Monroe is located in Union County
    • Population from the 2020 Census: 35,668 people
    • Jump to TripAdvisor's Tourism page for Monroe <2>
  • Mount Holly
    (21 miles [33.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Mount Holly have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Holly
    • Mount Holly is located in Gaston County
    • Population from the 2020 Census: 16,415 people
    • Jump to TripAdvisor's Tourism page for Mount Holly <2>
  • Mount Pleasant
    (25 miles [40.2 km] to the northeast)
  • Oakboro
    (23 miles [37 km] to the east)
    • Note: The GPS coordinates that we are using for Oakboro have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oakboro
    • Oakboro is located in Stanly County
    • Population from the 2020 Census: 1,928 people
    • Jump to TripAdvisor's Tourism page for Oakboro <2>
  • Pageland
    (30 miles [48.3 km] to the southeast)
  • Peachland
    (27 miles [43.5 km] to the east)
    • Note: The GPS coordinates that we are using for Peachland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Peachland
    • Peachland is located in Anson County
    • Population from the 2020 Census: 402 people
    • Jump to TripAdvisor's Tourism page for Peachland <2>
  • Pineville
    (9 miles [14.5 km] to the west)
  • Rock Hill
    (21 miles [33.8 km] to the southwest)
  • Stallings
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for Stallings have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stallings
    • Stallings is located in Union County
    • Population from the 2020 Census: 16,456 people
    • Jump to TripAdvisor's Tourism page for Stallings <2>
  • Stanfield
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Stanfield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stanfield
    • Stanfield is located in Stanly County
    • Population from the 2020 Census: 1,552 people
    • Jump to TripAdvisor's Tourism page for Stanfield <2>
  • Stanley
    (26 miles [41.8 km] to the northwest)
  • Tega Cay
    (18 miles [29 km] to the west)
  • Van Wyck
    (19 miles [30.6 km] to the south)
  • Waxhaw
    (13 miles [20.9 km] to the south)
  • Weddington
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Weddington have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Weddington
    • Weddington is located in Mecklenburg County
    • Population from the 2020 Census: 11,389 people
    • Jump to TripAdvisor's Tourism page for Weddington <2>
  • Wesley Chapel
    (8 miles [12.9 km] to the south)
    • Note: The GPS coordinates that we are using for Wesley Chapel have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wesley Chapel
    • Wesley Chapel is located in Union County
    • Population from the 2020 Census: 9,476 people
    • Jump to TripAdvisor's Tourism page for Wesley Chapel <2>
  • Wingate
    (17 miles [27.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Wingate have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wingate
    • Wingate is located in Union County
    • Population from the 2020 Census: 4,724 people
    • Jump to TripAdvisor's Tourism page for Wingate <2>
  • York
    (30 miles [48.3 km] to the west)

The official website for Matthews: www.matthewsnc.com/

The official website for Mecklenburg County: www.charmeck.org

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Matthews) to Point B.Our distance measurements begin at a specific point in Matthews. The point we use is located at these GPS coordinates - Latitude: 35.1183, Longitude: -80.7202    
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 20 Mar 2025