RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Randolph County >> Liberty >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Liberty. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Liberty.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Liberty - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 40 communities listed:

  • Archdale
    (22 miles [35.4 km] to the west)
  • Asheboro
    (18 miles [29 km] to the southwest)
    • Note: The GPS coordinates that we are using for Asheboro have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Asheboro
    • Asheboro is located in Randolph County
    • Population from the 2020 Census: 26,023 people
    • Jump to TripAdvisor's Tourism page for Asheboro <2>
  • Bennett
    (20 miles [32.2 km] to the south)
    • Note: The GPS coordinates that we are using for Bennett have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bennett
    • Bennett is located in Chatham County
    • Jump to TripAdvisor's Tourism page for Bennett <2>
  • Browns Summit
    (25 miles [40.2 km] to the north)
  • Burlington
    (18 miles [29 km] to the northeast)
  • Carrboro
    (27 miles [43.5 km] to the east)
    • Note: The GPS coordinates that we are using for Carrboro have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Carrboro
    • Carrboro is located in Orange County
    • Population from the 2020 Census: 21,239 people
    • Jump to TripAdvisor's Tourism page for Carrboro <2>
  • Chapel Hill
    (28 miles [45.1 km] to the east)
  • Climax
    (9 miles [14.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Climax have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Climax
    • Climax is located in Guilford County
    • Jump to TripAdvisor's Tourism page for Climax <2>
  • Colfax
    (30 miles [48.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Colfax have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Colfax
    • Colfax is located in Guilford County
    • Jump to TripAdvisor's Tourism page for Colfax <2>
  • Deep River
    (25 miles [40.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Deep River have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Deep River
    • Deep River is located in Guilford County
    • Jump to TripAdvisor's Tourism page for Deep River <2>
  • Efland
    (27 miles [43.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Efland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Efland
    • Efland is located in Orange County
    • Jump to TripAdvisor's Tourism page for Efland <2>
  • Elon College
    (16 miles [25.7 km] to the north)
    • Note: The GPS coordinates that we are using for Elon College came from an uncertain source and they still need to be verified:<4>
    • Jump to our Gazetteer entry for Elon College
    • Elon College is located in Alamance County
    • Jump to TripAdvisor's Tourism page for Elon College <2>
  • Farmville
    (27 miles [43.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Farmville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Farmville
    • Farmville is located in Chatham County
    • Jump to TripAdvisor's Tourism page for Farmville <2>
  • Franklinville
    (10 miles [16.1 km] to the southwest)
  • Gibsonville
    (17 miles [27.4 km] to the north)
  • Goldston
    (22 miles [35.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Goldston have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Goldston
    • Goldston is located in Chatham County
    • Population from the 2020 Census: 305 people
    • Jump to TripAdvisor's Tourism page for Goldston <2>
  • Graham
    (17 miles [27.4 km] to the northeast)
    • Jump to our Gazetteer entry for Graham
    • Graham is located in Alamance County
    • Population from the 2020 Census: 15,766 people
    • Jump to TripAdvisor's Tourism page for Graham <2>
  • Greensboro
    (19 miles [30.6 km] to the northwest)
  • Haw River
    (20 miles [32.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Haw River have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Haw River
    • Haw River is located in Alamance County
    • Population from the 2020 Census: 2,532 people
    • Jump to TripAdvisor's Tourism page for Haw River <2>
  • High Point
    (25 miles [40.2 km] to the west)
  • Hillsborough
    (30 miles [48.3 km] to the northeast)
  • Jamestown
    (22 miles [35.4 km] to the northwest)
  • Julian
    (6 miles [9.7 km] to the northwest)
  • McLeansville
    (18 miles [29 km] to the north)
    • Note: The GPS coordinates that we are using for McLeansville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McLeansville
    • McLeansville is located in Guilford County
    • Jump to TripAdvisor's Tourism page for McLeansville <2>
  • Mebane
    (23 miles [37 km] to the northeast)
    • Jump to our Gazetteer entry for Mebane
    • Mebane is located in Alamance County
    • Population from the 2020 Census: 16,732 people
    • Jump to TripAdvisor's Tourism page for Mebane <2>
  • Pittsboro
    (23 miles [37 km] to the east)
  • Pleasant Garden
    (12 miles [19.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Pleasant Garden have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pleasant Garden
    • Pleasant Garden is located in Guilford County
    • Population from the 2020 Census: 4,990 people
    • Jump to TripAdvisor's Tourism page for Pleasant Garden <2>
  • Ramseur
    (9 miles [14.5 km] to the southwest)
  • Randleman
    (13 miles [20.9 km] to the west)
  • Robbins
    (29 miles [46.7 km] to the south)
    • Note: The GPS coordinates that we are using for Robbins have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Robbins
    • Robbins is located in Moore County
    • Population from the 2020 Census: 1,241 people
    • Jump to TripAdvisor's Tourism page for Robbins <2>
  • Saxapahaw
    (15 miles [24.1 km] to the northeast)
  • Seagrove
    (24 miles [38.6 km] to the southwest)
  • Siler City
    (10 miles [16.1 km] to the southeast)
  • Snow Camp
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Snow Camp have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Snow Camp
    • Snow Camp is located in Alamance County
    • Jump to TripAdvisor's Tourism page for Snow Camp <2>
  • Sophia
    (16 miles [25.7 km] to the west)
  • Staley
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Staley have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Staley
    • Staley is located in Randolph County
    • Population from the 2020 Census: 401 people
    • Jump to TripAdvisor's Tourism page for Staley <2>
  • Summerfield
    (30 miles [48.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Summerfield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Summerfield
    • Summerfield is located in Guilford County
    • Population from the 2020 Census: 11,502 people
    • Jump to TripAdvisor's Tourism page for Summerfield <2>
  • Thomasville
    (28 miles [45.1 km] to the west)
    • Note: The GPS coordinates that we are using for Thomasville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Thomasville
    • Thomasville is located in Davidson County
    • Population from the 2020 Census: 26,713 people
    • Jump to TripAdvisor's Tourism page for Thomasville <2>
  • Trinity
    (24 miles [38.6 km] to the west)
    • Note: The GPS coordinates that we are using for Trinity have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Trinity
    • Trinity is located in Randolph County
    • Population from the 2020 Census: 6,639 people
    • Jump to TripAdvisor's Tourism page for Trinity <2>
  • Whitsett
    (15 miles [24.1 km] to the north)
    • Note: The GPS coordinates that we are using for Whitsett have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Whitsett
    • Whitsett is located in Guilford County
    • Population from the 2020 Census: 643 people
    • Jump to TripAdvisor's Tourism page for Whitsett <2>

Unfortunately, we don't know of an official website for Liberty. If you can help, please contact us through our Feedback Page.

The official website for Randolph County: www.co.randolph.nc.us/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Liberty) to Point B.Our distance measurements begin at a specific point in Liberty. The point we use is located at these GPS coordinates - Latitude: 35.8556, Longitude: -79.5681       In this case, the coordinates for Liberty have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024