RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Rowan County >> Landis >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Landis. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Landis.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Landis - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 46 communities listed:

  • Advance
    (29 miles [46.7 km] to the north)
    • Note: The GPS coordinates that we are using for Advance have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Advance
    • Advance is located in Davie County
    • Jump to TripAdvisor's Tourism page for Advance <3>
  • Albemarle
    (26 miles [41.8 km] to the southeast)
  • Badin
    (29 miles [46.7 km] to the east)
    • Note: The GPS coordinates that we are using for Badin have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Badin
    • Badin is located in Stanly County
    • Population from the 2020 Census: 1,934 people
    • Jump to TripAdvisor's Tourism page for Badin <3>
  • Catawba
    (27 miles [43.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Catawba have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Catawba
    • Catawba is located in Catawba County
    • Population from the 2020 Census: 627 people
    • Jump to TripAdvisor's Tourism page for Catawba <3>
  • Charlotte
    (25 miles [40.2 km] to the southwest)
  • China Grove
    (2 miles [3.2 km] to the northeast)
  • Cleveland
    (13 miles [20.9 km] to the north)
  • Concord
    (9 miles [14.5 km] to the south)
  • Cooleemee
    (18 miles [29 km] to the north)
    • Note: The GPS coordinates that we are using for Cooleemee have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cooleemee
    • Cooleemee is located in Davie County
    • Population from the 2020 Census: 982 people
    • Jump to TripAdvisor's Tourism page for Cooleemee <3>
  • Cornelius
    (16 miles [25.7 km] to the west)
    • Note: The GPS coordinates that we are using for Cornelius have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cornelius
    • Cornelius is located in Mecklenburg County
    • Population from the 2020 Census: 30,804 people
    • Jump to TripAdvisor's Tourism page for Cornelius <3>
  • Davidson
    (12 miles [19.3 km] to the west)
    • Note: The GPS coordinates that we are using for Davidson have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Davidson
    • Davidson is located in Mecklenburg County
    • Population from the 2020 Census: 13,203 people
    • Jump to TripAdvisor's Tourism page for Davidson <3>
  • Denton
    (28 miles [45.1 km] to the east)
    • Note: The GPS coordinates that we are using for Denton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Denton
    • Denton is located in Davidson County
    • Population from the 2020 Census: 1,700 people
    • Jump to TripAdvisor's Tourism page for Denton <3>
  • Denver
    (23 miles [37 km] to the west)
  • Faith
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Faith have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Faith
    • Faith is located in Rowan County
    • Population from the 2020 Census: 802 people
    • Jump to TripAdvisor's Tourism page for Faith <3>
  • Gold Hill
    (15 miles [24.1 km] to the east)
    • Note: The GPS coordinates that we are using for Gold Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gold Hill
    • Gold Hill is located in Rowan County
    • Jump to TripAdvisor's Tourism page for Gold Hill <3>
  • Granite Quarry
    (10 miles [16.1 km] to the northeast)
  • Harmony
    (29 miles [46.7 km] to the north)
    • Note: The GPS coordinates that we are using for Harmony have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Harmony
    • Harmony is located in Iredell County
    • Population from the 2020 Census: 604 people
    • Jump to TripAdvisor's Tourism page for Harmony <3>
  • Harrisburg
    (15 miles [24.1 km] to the south)
  • Huntersville
    (17 miles [27.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Huntersville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Huntersville
    • Huntersville is located in Mecklenburg County
    • Population from the 2020 Census: 59,095 people
    • Jump to TripAdvisor's Tourism page for Huntersville <3>
  • Kannapolis
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Kannapolis have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kannapolis
    • Kannapolis is located in Rowan County
    • Population from the 2020 Census: 52,007 people
    • Jump to TripAdvisor's Tourism page for Kannapolis <3>
  • Lake Norman of Catawba
    (19 miles [30.6 km] to the west)
    • Note: The GPS coordinates that we are using for Lake Norman of Catawba have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake Norman of Catawba
    • Lake Norman of Catawba is located in Catawba County
    • Jump to TripAdvisor's Tourism page for Lake Norman of Catawba <3>
  • Lexington
    (27 miles [43.5 km] to the northeast)
  • Linwood
    (21 miles [33.8 km] to the northeast)
  • Locust
    (21 miles [33.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Locust have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Locust
    • Locust is located in Stanly County
    • Population from the 2020 Census: 3,270 people
    • Jump to TripAdvisor's Tourism page for Locust <3>
  • Matthews
    (30 miles [48.3 km] to the south)
  • Midland
    (21 miles [33.8 km] to the south)
    • Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Midland
    • Midland is located in Cabarrus County
    • Population from the 2020 Census: 3,880 people
    • Jump to TripAdvisor's Tourism page for Midland <3>
  • Mint Hill
    (25 miles [40.2 km] to the south)
  • Mocksville
    (24 miles [38.6 km] to the north)
  • Mooresville
    (11 miles [17.7 km] to the west)
  • Mount Holly
    (28 miles [45.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Mount Holly have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Holly
    • Mount Holly is located in Gaston County
    • Population from the 2020 Census: 16,415 people
    • Jump to TripAdvisor's Tourism page for Mount Holly <3>
  • Mount Pleasant
    (14 miles [22.5 km] to the southeast)
  • Mount Ulla
    (10 miles [16.1 km] to the northwest)
  • New London
    (23 miles [37 km] to the east)
  • Oakboro
    (26 miles [41.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Oakboro have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oakboro
    • Oakboro is located in Stanly County
    • Population from the 2020 Census: 1,928 people
    • Jump to TripAdvisor's Tourism page for Oakboro <3>
  • Richfield
    (20 miles [32.2 km] to the east)
    • Note: The GPS coordinates that we are using for Richfield have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Richfield
    • Richfield is located in Stanly County
    • Population from the 2020 Census: 627 people
    • Jump to TripAdvisor's Tourism page for Richfield <3>
  • Rockwell
    (11 miles [17.7 km] to the east)
  • Salisbury
    (11 miles [17.7 km] to the northeast)
  • Sherrills Ford
    (21 miles [33.8 km] to the west)
  • Spencer
    (14 miles [22.5 km] to the northeast)
  • Stallings
    (30 miles [48.3 km] to the south)
    • Note: The GPS coordinates that we are using for Stallings have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stallings
    • Stallings is located in Union County
    • Population from the 2020 Census: 16,456 people
    • Jump to TripAdvisor's Tourism page for Stallings <3>
  • Stanfield
    (23 miles [37 km] to the southeast)
    • Note: The GPS coordinates that we are using for Stanfield have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stanfield
    • Stanfield is located in Stanly County
    • Population from the 2020 Census: 1,552 people
    • Jump to TripAdvisor's Tourism page for Stanfield <3>
  • Stanley
    (30 miles [48.3 km] to the southwest)
  • Statesville
    (21 miles [33.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Statesville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Statesville
    • Statesville is located in Iredell County
    • Population from the 2020 Census: 28,045 people
    • Jump to TripAdvisor's Tourism page for Statesville <3>
  • Terrell
    (20 miles [32.2 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Terrell. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Terrell
    • Terrell is located in Catawba County
    • Jump to TripAdvisor's Tourism page for Terrell <3>
  • Troutman
    (18 miles [29 km] to the northwest)
  • Woodleaf
    (15 miles [24.1 km] to the north)

Unfortunately, we don't know of an official website for Landis. If you can help, please contact us through our Feedback Page.

The official website for Rowan County: www.co.rowan.nc.us/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Landis) to Point B.Our distance measurements begin at a specific point in Landis. The point we use is located at these GPS coordinates - Latitude: 35.5480, Longitude: -80.6105       In this case, the coordinates for Landis have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 20 Mar 2025