TripAdvisor Links
Introduction ...
When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
While we are unaware of a TripAdvisor Tourism page that is specific to Kingdale, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Kingdale - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 33 communities listed:
- Bladenboro
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Bladenboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bladenboro
- Bladenboro is located in Bladen County
- Population from the 2020 Census: 1,697 people
- Jump to TripAdvisor's Tourism page for Bladenboro <3>
- Brunswick
(25 miles [40.2 km] to the southeast)
- Chadbourn
(18 miles [29 km] to the southeast)
- Clarkton
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Clarkton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarkton
- Clarkton is located in Bladen County
- Population from the 2020 Census: 741 people
- Jump to TripAdvisor's Tourism page for Clarkton <3>
- Clio
(30 miles [48.3 km] to the west)
- Jump to our Gazetteer entry for Clio
- Clio is located in Marlboro County (SC)
- Population from the 2020 Census: 645 people
- Jump to TripAdvisor's Tourism page for Clio <3>
- Dillon
(22 miles [35.4 km] to the southwest)
- Elizabethtown
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Elizabethtown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elizabethtown
- Elizabethtown is located in Bladen County
- Population from the 2020 Census: 3,378 people
- Jump to TripAdvisor's Tourism page for Elizabethtown <3>
- Fairmont
(6 miles [9.7 km] to the southwest)
- Floydale
(23 miles [37 km] to the southwest)
- Fork
(23 miles [37 km] to the southwest)
- Green Sea
(28 miles [45.1 km] to the south)
- Hamer
(18 miles [29 km] to the west)
- Hope Mills
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Hope Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hope Mills
- Hope Mills is located in Cumberland County
- Population from the 2020 Census: 15,848 people
- Jump to TripAdvisor's Tourism page for Hope Mills <3>
- Lake View
(16 miles [25.7 km] to the southwest)
- Latta
(27 miles [43.5 km] to the southwest)
- Laurinburg
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Laurinburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laurinburg
- Laurinburg is located in Scotland County
- Population from the 2020 Census: 14,896 people
- Jump to TripAdvisor's Tourism page for Laurinburg <3>
- Little Rock
(22 miles [35.4 km] to the west)
- Lumberton
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Lumberton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <3>
- Maxton
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Maxton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maxton
- Maxton is located in Robeson County
- Population from the 2020 Census: 2,332 people
- Jump to TripAdvisor's Tourism page for Maxton <3>
- Minturn
(26 miles [41.8 km] to the west)
- Mullins
(27 miles [43.5 km] to the southwest)
- Nichols
(22 miles [35.4 km] to the south)
- Parkton
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkton
- Parkton is located in Robeson County
- Population from the 2020 Census: 430 people
- Jump to TripAdvisor's Tourism page for Parkton <3>
- Pembroke
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Robeson County
- Population from the 2020 Census: 2,942 people
- Jump to TripAdvisor's Tourism page for Pembroke <3>
- Red Springs
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Red Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Springs
- Red Springs is located in Robeson County
- Population from the 2020 Census: 3,237 people
- Jump to TripAdvisor's Tourism page for Red Springs <3>
- Rowland
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Rowland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rowland
- Rowland is located in Robeson County
- Population from the 2020 Census: 985 people
- Jump to TripAdvisor's Tourism page for Rowland <3>
- Saint Pauls
(18 miles [29 km] to the north)
- Stoney Point
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Stoney Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stoney Point
- Stoney Point is located in Cumberland County
- Jump to TripAdvisor's Tourism page for Stoney Point <3>
- Tabor City
(28 miles [45.1 km] to the south)
- Tar Heel
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Tar Heel have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tar Heel
- Tar Heel is located in Bladen County
- Population from the 2020 Census: 115 people
- Jump to TripAdvisor's Tourism page for Tar Heel <3>
- White Lake
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for White Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Lake
- White Lake is located in Bladen County
- Population from the 2020 Census: 742 people
- Jump to TripAdvisor's Tourism page for White Lake <3>
- White Oak
(22 miles [35.4 km] to the northeast)
- Whiteville
(22 miles [35.4 km] to the southeast)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Kingdale. If you can help, please contact us through our Feedback Page.
The official website for Robeson County: www.co.robeson.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Kingdale) to Point B.Our distance measurements begin at a specific point in Kingdale. The point we use is located at these GPS coordinates - Latitude: 34.5446, Longitude: -79.0145 In this case, the coordinates for Kingdale have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |