|
TripAdvisor Links
Introduction ...
When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
While we are unaware of a TripAdvisor Tourism page that is specific to Bel Air, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Bel Air - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 34 communities listed:
- Aberdeen
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Aberdeen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Aberdeen
- Aberdeen is located in Moore County
- Population from the 2020 Census: 8,339 people
- Jump to TripAdvisor's Tourism page for Aberdeen <3>
- Bennettsville
(17 miles [27.4 km] to the southwest)
- Blenheim
(22 miles [35.4 km] to the southwest)
- Cheraw
(26 miles [41.8 km] to the west)
- Jump to our Gazetteer entry for Cheraw
- Cheraw is located in Chesterfield County (SC)
- Population from the 2020 Census: 5,554 people
- Jump to TripAdvisor's Tourism page for Cheraw <3>
- Clio
(15 miles [24.1 km] to the south)
- Jump to our Gazetteer entry for Clio
- Clio is located in Marlboro County (SC)
- Population from the 2020 Census: 645 people
- Jump to TripAdvisor's Tourism page for Clio <3>
- Dillon
(25 miles [40.2 km] to the south)
- Ellerbe
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Ellerbe have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellerbe
- Ellerbe is located in Richmond County
- Population from the 2020 Census: 968 people
- Jump to TripAdvisor's Tourism page for Ellerbe <3>
- Fairmont
(27 miles [43.5 km] to the southeast)
- Gibson
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Gibson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gibson
- Gibson is located in Scotland County
- Population from the 2020 Census: 497 people
- Jump to TripAdvisor's Tourism page for Gibson <3>
- Hamer
(22 miles [35.4 km] to the south)
- Hamlet
(15 miles [24.1 km] to the northwest)
- Latta
(30 miles [48.3 km] to the south)
- Laurel Hill
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Laurel Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laurel Hill
- Laurel Hill is located in Scotland County
- Jump to TripAdvisor's Tourism page for Laurel Hill <3>
- Laurinburg
(2 miles [3.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Laurinburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laurinburg
- Laurinburg is located in Scotland County
- Population from the 2020 Census: 14,896 people
- Jump to TripAdvisor's Tourism page for Laurinburg <3>
- Little Rock
(21 miles [33.8 km] to the south)
- Lumberton
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Lumberton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <3>
- Maxton
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Maxton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maxton
- Maxton is located in Robeson County
- Population from the 2020 Census: 2,332 people
- Jump to TripAdvisor's Tourism page for Maxton <3>
- McColl
(9 miles [14.5 km] to the southwest)
- Minturn
(18 miles [29 km] to the south)
- Parkton
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkton
- Parkton is located in Robeson County
- Population from the 2020 Census: 430 people
- Jump to TripAdvisor's Tourism page for Parkton <3>
- Pembroke
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Robeson County
- Population from the 2020 Census: 2,942 people
- Jump to TripAdvisor's Tourism page for Pembroke <3>
- Pinebluff
(22 miles [35.4 km] to the north)
- Pinehurst
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Pinehurst have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinehurst
- Pinehurst is located in Moore County
- Population from the 2020 Census: 17,014 people
- Jump to TripAdvisor's Tourism page for Pinehurst <3>
- Raeford
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Raeford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Raeford
- Raeford is located in Hoke County
- Population from the 2020 Census: 4,956 people
- Jump to TripAdvisor's Tourism page for Raeford <3>
- Red Springs
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Red Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Springs
- Red Springs is located in Robeson County
- Population from the 2020 Census: 3,237 people
- Jump to TripAdvisor's Tourism page for Red Springs <3>
- Rockingham
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Rockingham have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockingham
- Rockingham is located in Richmond County
- Population from the 2020 Census: 8,520 people
- Jump to TripAdvisor's Tourism page for Rockingham <3>
- Rowland
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Rowland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rowland
- Rowland is located in Robeson County
- Population from the 2020 Census: 985 people
- Jump to TripAdvisor's Tourism page for Rowland <3>
- Saint Pauls
(26 miles [41.8 km] to the east)
- Society Hill
(29 miles [46.7 km] to the southwest)
- Southern Pines
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Southern Pines have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Southern Pines
- Southern Pines is located in Moore County
- Population from the 2020 Census: 15,070 people
- Jump to TripAdvisor's Tourism page for Southern Pines <3>
- Stoney Point
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Stoney Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stoney Point
- Stoney Point is located in Cumberland County
- Jump to TripAdvisor's Tourism page for Stoney Point <3>
- Tatum
(12 miles [19.3 km] to the southwest)
- Wagram
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Wagram have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wagram
- Wagram is located in Scotland County
- Population from the 2020 Census: 772 people
- Jump to TripAdvisor's Tourism page for Wagram <3>
- Wallace
(22 miles [35.4 km] to the west)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Bel Air. If you can help, please contact us through our Feedback Page. The official website for Scotland County: www.scotlandcounty.org/ The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Bel Air) to Point B.Our distance measurements begin at a specific point in Bel Air. The point we use is located at these GPS coordinates - Latitude: 34.7821, Longitude: -79.4434 In this case, the coordinates for Bel Air have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|